Compex Systems MMC2N28 Wireless Access Point User Manual MMC543AHVN2 26 Manual 120307

Compex Systems Pte Ltd Wireless Access Point MMC543AHVN2 26 Manual 120307

User Manual

product datasheet Features • Atheros XR™ eXtended Range technology • MIPS 24K-family 680MHz network processor • IEEE 802.11n compliant and backward compatible with 802.11b/g • Dual-band MIMO 2 x 2 spatial multiplexing technique • Supports up to 300Mbps physical data rates • Delivers 10 times the throughput and nearly twice the range of legacy 802.11g network • Flexible, integrated single or dual radio options • Supports IEEE802.11i , IEEE802.1x authentication • Supports 802.3af and Passive Power-over-Ethernet (PoE) • 2 x RP-SMA Connector and Antenna • Surge arrestor support Wireless Indoor Access Point MMC543AHVN2-26
MMC2N28AHV TECHNICAL SPECIFICATIONS 0B0BHARDWARE INFORMATION Processor Atheros AR7161 (680MHz) Network Processor System Memory 32MB (max 64MB optional) DDR SDRAM NOR Flash 8MB (max 16MB optional) LAN Interface 1 x 10/100 BASE-T Ethernet Port Antenna 2 x 2dBi detachable SMA antenna Power Consumption 7.5Watts Radio Option② MIMO MINIPCI CARD RADIO 802.11b 802.11g 1Mbps 29dBm 6Mbps 29dBm 29dBm 54Mbps 24dBm 802.11n/g HT20 HT40 MS0 26dBm 25dBm MS3 26dBm 25dBm Tx Specifications MS7 23dBm 23dBm 802.11b 802.11g 1Mbps -94dBm 6Mbps -94dBm -94dBm 54Mbps -74dBm 802.11n/g HT20 HT40 MS0 -92dBm -90dBm MS3 -86dBm -82dBm Rx Specifications MS7 -73dBm -71dBm Power Supply 24V to 48V DC, power adapter and injector included Power method Passive PoE(range 24V-48V DC), 802.3af PoE(48V-56V) or DC Jack RoHS Compliant Yes Weight 260 grams Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Temperature Range Operating:-20ºC to 70ºC Storage: -40ºC to 90ºC Dimension 145mm x 132mm x 41mm (H x W x D)
FIRMWARE SPECIFICATIONS Multiple SSID • Supports up to 4 virtual access points (VAP) per radio, with unique BSSID. Each VAP can configure their own security and differentiated services. Long Range Support • Suitable for long range wireless deployment with Proprietary Long Distance Algorithm of ACK and CTS timeout adjustment support. • Provides recommended values for the parameters as well as allow for manual fine-tuning for optimal performance. Signal Strength Indicators • LEDs are adjustable to display 4 different level signal strength Variable Spectrum Bandwidth Support • Options to select operation over 5MHz,20MHz and 40MHz spectrum bandwidth FIRMWARE INFORMATION Operating Modes • Access Points • Station • Station WDS • Repeater WDS • Wireless Adapter • Station + Router • Access Point + Router WAN Type • Static IP • Dynamic IP • PPPoE Device Management • HTTP / HTTPs Web Server • SNMP V2c • Telnet / Secure Shell (SSH) Data Capture & Notification • Event Login (Syslog) • Detailed Statistics per Client Virtual Access Point (VAP) • Up to 4 SSIDs with unique MAC Addresses (BSSID) Advanced Features • Built-in DHCP server • Transmission Power Control (One dB per step) • Closed System (Suppress SSID) • Transmission Rate Control • Spanning Tree Protocol OTHER PROMINENT FEATURES DESCRIPTION Long Range Parameter Settings Distance adjustment for long range transmission CPE Point-to-Point (PtP) Ideal as CPE device connecting PtP with a central AP Power with PoE Device power from PoE through ethernet cable provides flexible installation. SNMP Trap SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event. Signal Strength LEDs Indicators 4 Step Progressive Bars. Each bar represents a progressive increase in signal strength, with 4 bars representing maximum signalDHCP Relay (Only in Gateway or Wireless Routing Client Mode) Allows DHCP Clients on different subnets to get IP address from central DHCP server. Remote Upgrade of Firmware Allows user to upgrade their firmware through Telnet/SSH RIP 1 / 2 (Only in Gateway or Wireless Routing Client Mode) Routing Information Protocol Version 1 / 2 Tag and Untag VLAN/VLAN Pass-through a. Tag VLAN Pass-through mode in AP/Transparent Client link b. Wireless untag Vlan to Ethernet Tag Vlan mode c. Wireless tag Vlan to Ethernet Tag Vlan mode d. Customizable Optionse CUSTOMIZABLE FEATURES DESCRIPTION Web Page Customization Customize webpage for OEM customers. Ordering Configurations②
Item Code Version Radio Output Carton Dimension MMC543AHV 6D07GFCUN2-26 COMPEX US version 28dBm MMC543AHV 6D07GFCEN2-26 COMPEX EU version 28dBm MMC543AHV 6D07GFOUN2-26 OEM US version 28dBm MMC543AHV 6D07GFOEN2-26 OEM EU version 28dBm MMC543AHV 6D07GFWUN2-26 Open-WRT US version 28dBm MMC543AHV 6D07GFWEN2-26 Open-WRT EU version 28dBm For 10 pcs/carton, 0.78m*0.38m*0.25m /0.006=12.35KG c For OEM customization options, please contact sales person. ② Configurations are subject to change without notice Please contact Compex sales representatives for other available configurations
Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. (5) Outdoor Operations in the 5.15~5.25GHz band is prohibited. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. WARNING: This AP does not support ad-hoc mode Function FCC ID: TK4MMC2N28 Compex Systems Pte Ltd Compex (Suzhou) Co Ltd 135 Joo Seng Road, PM Industrial Building #08-01, Singapore 368363 Tel: (65) 6286 2086 Fax: (65) 6280-9947 Email: sales@compex.com.sg NO.12, ChuangTou Industrial Square, LouFeng North, Suzhou Industrial Park, Suzhou, Jiangsu Province, China 215122 Tel: (86)-512-62950050 Fax: (86)-512-62950026 Copyright © 2011 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information accurate, Compex does not accept liability for any errors or mistakes that may arise. All specification is subject to change without notice. DS V 1.0.7 Wiky 111216 For more information, visit www.compex.com.sg

Navigation menu