Compex Systems WLE600VX 802.11ac Dual Band Module User Manual ah

Compex Systems Pte Ltd 802.11ac Dual Band Module ah

UserManual.wiki >

Compex Systems >

WLE600VX User Manual >

Contents

User Manual

product datasheet • Qualcomm-Atheros QCA9892 • 2.4GHz max 21dBm & 5GHz max 21dBm output power (per chain) • IEEE 802.11ac complaint & backward compatible with 802.11a/b/g/n • 2X2 MIMO Technology & up to 867Mbps • MiniPCI Express 1.1 interface • Supports Spatial Multiplexing, low-density parity, check (LDPC), Maximal Ratio Combining (MRC), Space Time Block Code (STBC) • Supports IEEE 802.11d, e, h, I, k, RO, v time stamp, and w standards • Supported by either CompexWRT with Atheros Reference Wireless Driver OR OpenWRT with ath10k Wireless Driver on WPJ344 • Cards are individually calibrated for Quality Assurance 2x2 2.4/5GHz 11ac miniPCIe Radio Model: WLE600VX Revision:1.04 IL Date: 2015,03,30 Features

Technical Specifications System Information Chipset QCA9892 Host Interface PCI-Express 1.1 Standard Operating Voltage 3.3 VDC Power Consumption 3.5W Antenna Connector 2 x U.F L Frequency Range 2.4G: 2.412 ~ 2.472 GHz 5G: 5.180 ~ 5.825 GHz Modulation Techniques BPSK, QPSK, DBPSK,DQPSK,CCK,16-QAM, 64-QAM, 256-QAM RoHS Compliance Yes Temperature Range Operating: -20ºC to 70ºC; Storage: -40ºC to 90ºC Humidity Operating:5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Dimensions (mm) 50.95 x 30 x 3.2 (H x W x D) Band TX Specifications RX Specifications 802.11bg Data Rate TX Power (per chain) TX Power (2 chains) Tolerance Data Rate Sensitivity Tolerance 6-24Mbps 20dBm -- ± 2dB 6Mbps -94dBm ± 2dB 36Mbps 19dBm -- ± 2dB 36Mbps -86dBm ± 2dB 48Mbps 18dBm -- ± 2dB 48Mbps -82dBm ± 2dB 54Mbps 17dBm -- ± 2dB 54Mbps -80dBm ± 2dB 2.4GHz 11n HT20 MCS 0 19dBm 23dBm ± 2dB MCS 0 -94dBm ± 2dB MCS 1 18dBm 22dBm ± 2dB MCS1 -94dBm ± 2dB MCS 2 18dBm 22dBm ± 2dB MCS2 -92dBm ± 2dB MCS 3 17dBm 22dBm ± 2dB MCS 3 -88dBm ± 2dB MCS 4 17dBm 22dBm ± 2dB MCS 4 -84dBm ± 2dB MCS 5 17dBm 22dBm ± 2dB MCS 5 -81dBm ± 2dB MCS 6 16dBm 21dBm ± 2dB MCS 6 -78dBm ± 2dB MCS 7 15dBm 19dBm ± 2dB MCS 7 -77dBm ± 2dB 2.4GHz 11n HT40 MCS 0 19dBm 23dBm ± 2dB MCS 0 -93dBm ± 2dB MCS 1 18dBm 22dBm ± 2dB MCS1 -91dBm ± 2dB MCS 2 18dBm 22dBm ± 2dB MCS2 -90dBm ± 2dB MCS 3 17dBm 22dBm ± 2dB MCS 3 -85dBm ± 2dB MCS 4 17dBm 22dBm ± 2dB MCS 4 -82dBm ± 2dB MCS 5 17dBm 22dBm ± 2dB MCS 5 -78dBm ± 2dB MCS 6 16dBm 21dBm ± 2dB MCS 6 -77dBm ± 2dB MCS 7 15dBm 19dBm ± 2dB MCS 7 -75dBm ± 2dB 802.11a 6-24Mbps 19dBm -- ± 2dB 6Mbps -94dBm ± 2dB 36Mbps 18dBm -- ± 2dB 36Mbps -86dBm ± 2dB 48Mbps 18dBm -- ± 2dB 48Mbps -82dBm ± 2dB 54Mbps 17dBm -- ± 2dB 54Mbps -80dBm ± 2dB 5GHz 11an/ac HT20 MCS0 19dBm 21dBm ± 2dB MCS0 -93dBm ± 2dB MCS1 19dBm 21dBm ± 2dB MCS1 -91dBm ± 2dB MCS2 19dBm 21dBm ± 2dB MCS2 -90dBm ± 2dB MCS3 18dBm 20dBm ± 2dB MCS3 -85dBm ± 2dB MCS4 18dBm 20dBm ± 2dB MCS4 -82dBm ± 2dB MCS5 17dBm 20dBm ± 2dB MCS5 -78dBm ± 2dB MCS6 16dBm 19dBm ± 2dB MCS6 -77dBm ± 2dB MCS7 16dBm 19dBm ± 2dB MCS7 -75dBm ± 2dB MCS8 15dBm 18dBm ± 2dB MCS8 -73dBm ± 2dB MCS9 15dBm 18dBm ± 2dB MCS9 -71dBm ± 2dB 5GHz 11n/ac HT40 MCS0 19dBm 21dBm ± 2dB MCS0 -93dBm ± 2dB MCS1 19dBm 21dBm ± 2dB MCS1 -91dBm ± 2dB MCS2 19dBm 21dBm ± 2dB MCS2 -90dBm ± 2dB MCS3 18dBm 20dBm ± 2dB MCS3 -85dBm ± 2dB MCS4 18dBm 20dBm ± 2dB MCS4 -82dBm ± 2dB MCS5 16dBm 19dBm ± 2dB MCS5 -78dBm ± 2dB MCS6 15dBm 18dBm ± 2dB MCS6 -77dBm ± 2dB MCS7 15dBm 18dBm ± 2dB MCS7 -75dBm ± 2dB MCS8 14dBm 17dBm ± 2dB MCS8 -73dBm ± 2dB MCS9 14dBm 17dBm ± 2dB MCS9 -71dBm ± 2dB 5GHz11ac HT80 MCS0 19dBm 21dBm ± 2dB MCS0 -89dBm ± 2dB MCS1 19dBm 21dBm ± 2dB MCS1 -88dBm ± 2dB MCS2 19dBm 21dBm ± 2dB MCS2 -85dBm ± 2dB MCS3 18dBm 20dBm ± 2dB MCS3 -81dBm ± 2dB MCS4 18dBm 20dBm ± 2dB MCS4 -79dBm ± 2dB MCS5 16dBm 19dBm ± 2dB MCS5 -75dBm ± 2dB MCS6 15dBm 18dBm ± 2dB MCS6 -74dBm ± 2dB MCS7 15dBm 18dBm ± 2dB MCS7 -72dBm ± 2dB MCS8 14dBm 17dBm ± 2dB MCS8 -70dBm ± 2dB MCS9 14dBm 17dBm ± 2dB MCS9 -68dBm ± 2dB

: 5.725~5.850GHz bands use the max antenna gain 10dBi, 5.15~5.35GHz and 5. Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The antenna gain which being use as below: Antenna Type Manufacturer Tx Paths Max Directional Gain (dBi) Panel Antenna 1# Compex Systems Pte Ltd 2.4GHz: 11.0 Panel Antenna 2# Kenbotong Communication LTD 2.4GHz: 10.0, 5GHz: 10.0 Panel Antenna 3# Smart Ant Inc 2.4GHz: 7.0, 5GHz: 7.0 Panel Antenna 4# TAOGLAS Inc 2.4GHz: 4.5, 5GHz: 6.7 Panel Antenna 5# Compex Systems Pte Ltd 2.4GHz: 5.0, 5GHz: 5.0 Panel Antenna 6# Compex Systems Pte Ltd 2.4GHz: 5.0, 5GHz: 5.0 Dipole Antenna 1# Kunshan Wavelink Electronic Co., Ltd. 2.4GHz: 2.0, 5GHz: 2.0 20Note: 5.725~5.850GHz support the max antenna 10dBi,5.15~5.35,5.47~5.725GHz support the max antenna 7dBi.This device is only a client equipment,the device is not radar detection and not ad-hoc operation in the DFS band.2222222

OEM integration instructions： This device is intended only for OEM integrators under the following conditions： The module is only limited to installation in mobile applications. The antenna must be installed such that 20 cm is maintained between the antenna and users，and the transmitter module may not be co-located with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met，further transmitter test will not be required. However，the OEM integrator is still responsible for testing their end-product for any additional compliance requirement with this module installed (for example，digital device emission，PC peripheral requirements，etc.) OEM integration instructions： In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstance，the OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization End product labeling： This transmitter module is authorization only for use in device where the antenna may be installed such that cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following： “Contains Transmitter Module FCC ID: TK4WLE600VX or Contains FCC ID: TK4WLE600VX” Information that must be placed in the end user manual： The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Compex (Suzhou) Co Ltd No.12 ChuangTou Industrial Square LouFeng North, Suzhou Industrial Park Suzhou, Jiangsu Province China 215122 Tel: +86 512 62950050 Fax: +86 512 62950026 20

Navigation menu