Compex Systems WLM200N5-26ESD WIRELESS-A/N 26DBM NETWORK MINIPCI ADAPTER WITH ESD User Manual

Compex Systems Pte Ltd WIRELESS-A/N 26DBM NETWORK MINIPCI ADAPTER WITH ESD Users Manual

UserManual.wiki >

Compex Systems >

WLM200N5 26ESD User Manual

Users Manual

2 x 2 802.11N MIMO mini-PCI Modules WIRELESS-A/N 26DBM NETWORK MINI PCI ADAPTER WITH ESD WLM200N5-26 ESD 5GHz Single-Band 802.11n MIMO 2 x 2 miniPCI Features • Atheros XSPAN family chipset • IEEE 802.11n compliant and backward compatible with 802.11a • Enhanced sensitivity • Optimized isolation path • Superior thermal performance • Maximum output power 26dBm@802.11a / 28dBm MIMO aggregate • Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV ① • Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard) • 2 x MMCX connectors allowing for improved mechanical stability and low loss

WLM200N5-26 ESD MIMO MINIPCI CARD RADIO TX SPECIFICATIONS DataRate TX Power (per chain)TX Power (2 chains)Tolerance 6-24Mbps 26dBm 28dBm ±2dB 36Mbps 25dBm 28dBm ±2dB 48Mbps 24dBm 27dBm ±2dB 802.11a 54Mbps 23dBm 26dBm ±2dB DataRate TX Power (per chain) TX Power(2 chains) Tolerance DataRate TX Power (per chain) TX Power (2 chains) ToleranceMCS 0/8 25dBm 28dBm ±2dB MCS 0/8 24dBm 27dBm ±2dB MCS 1/9 25dBm 28dBm ±2dB MCS 1/9 24dBm 27dBm ±2dB MCS 2/10 23.5dBm 26.5dBm ±2dB MCS 2/10 22.5dBm 25.5dBm ±2dB MCS 3/11 23.5dBm 26.5dBm ±2dB MCS 3/11 22.5dBm 25.5dBm ±2dB MCS 4/12 22.5dBm 25.5dBm ±2dB MCS 4/12 22dBm 25dBm ±2dB MCS 5/13 22dBm 25dBm ±2dB MCS 5/13 20.5dBm 23.5dBm ±2dB MCS 6/14 21dBm 24dBm ±2dB MCS 6/14 20.5dBm 23.5dBm ±2dB 5GHz 11n HT 20 MCS 7/15 20dBm 23dBm ±2dB 5GHz 11nHT 40MCS 7/15 17dBm 20dBm ±2dB RX SPECIFICATIONS DataRate Sensitivity (2 chains) Tolerance DataRate Sensitivity (2 chains) Tolerance 6M -96dBm ±2dB 24M -89dBm ±2dB 9M -96dBm ±2dB 36M -86dBm ±2dB 12M -95dBm ±2dB 48M -82dBm ±2dB 802.11a 18M -93dBm ±2dB 802.11a54M -79dBm ±2dB MCS0 -95dBm ±2dB MCS0 -92dBm ±2dB MCS1 -93dBm ±2dB MCS1 -90dBm ±2dB MCS2 -90dBm ±2dB MCS2 -87dBm ±2dB MCS3 -89dBm ±2dB MCS3 -84dBm ±2dB MCS4 -85dBm ±2dB MCS4 -81dBm ±2dB MCS5 -81dBm ±2dB MCS5 -77dBm ±2dB MCS6 -79dBm ±2dB MCS6 -76dBm ±2dB 5GHz 11n HT 20 MCS7 -75dBm ±2dB 5GHz11n HT 40MCS7 -74dBm ±2dB Technical Specifications Chipset Atheros AR9220 Host Interface 32-bit mini-PCI Type IIIA+ (6.55mm longer than IIIA type) Operating Voltage 3.3 VDC 11a Cont. Tx @6M 4.9W 11na Cont. Tx@HT20 MCS0 4.3W 11na Cont. Tx@HT40 MCS0 4.8W 11a Cont. Rx 2.5W Power Consumption Standby 0.8W Antenna Connector 2 x MMCX connector IEEE 802.11a : 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps 1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.) 20MHz 2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.) 1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.) Data Rate IEEE 802.11n : 40MHz 2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.)5.725 ~ 5.850 GHz (US & Canada) 5.725 ~ 5.875 GHz (Europe) Frequency Range IEEE 802.11a/n: Modulation Techniques OFDM: BPSK, QPSK, 16-QAM, 64-QAM RoHS Compliance Yes Temperature Range Operating: -20ºC to 70ºC Storage: -40ºC to 90ºC Humidity Operating:5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Dimension 59.6mm x 57.5mm x 7.5mm

ESD CABLE SPECIFICATION Cable Dimensions 26cm length Terminal Material Copper Attachment Procedure End of ESD Cable tied to Earth Ground Ordering Information② CODES Connectors type Carton Dimension WLM200N5-26ESD 7B0000 MMCX For 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG For 250pc (pcs/ctn), 0.45m * 0.45m * 0.24m / 0.006 = 8.1KG c Module grounding cable included d Configurations are subject to change without notice Please contact Compex sales representatives for other available configurations COMPLIANCE INFORMATION FCC NOTICE This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Connect the computer into an outlet on a circuit different from that to which the receiver is connected. • Increase the separation between the computer and receiver. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. IEEE 802.11a or 802.11n operation of this product in the U.S.A. is firmware-limited to channels 1 through 24. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must be installed to provide a separation distance of at least 20cm from

all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE REGARDING ANTENNA USE Antenna Use (Point to Multipoint) 2x2 Operation Chain1 Chain2 FCC ID: TK4WLM200N5-26ESD IC : 7849A-N5-26ESD

Navigation menu