Compex Systems WLM200N523-49 WIRELESS-N 4.9GHz 23DBM NETWORK MINI PCI ADAPTER WITH ESD User Manual WLM200N5 23ESD 4 9 UM 121024

Compex Systems Pte Ltd WIRELESS-N 4.9GHz 23DBM NETWORK MINI PCI ADAPTER WITH ESD WLM200N5 23ESD 4 9 UM 121024

TK4WLM200N523-49 User Manual_update

Download: Compex Systems WLM200N523-49 WIRELESS-N 4.9GHz 23DBM NETWORK MINI PCI ADAPTER WITH ESD User Manual WLM200N5 23ESD 4 9 UM 121024
Mirror Download [FCC.gov]Compex Systems WLM200N523-49 WIRELESS-N 4.9GHz 23DBM NETWORK MINI PCI ADAPTER WITH ESD User Manual WLM200N5 23ESD 4 9 UM 121024
Document ID1823545
Application IDTMiL2ZPDB9dK1ZBGW2OJug==
Document DescriptionTK4WLM200N523-49 User Manual_update
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize26.07kB (325878 bits)
Date Submitted2012-10-26 00:00:00
Date Available2012-10-26 00:00:00
Creation Date2012-10-24 11:40:29
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2012-10-24 11:53:17
Document TitleMicrosoft Word - WLM200N5-23ESD-4.9 UM_121024.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Ansem Lu

Radio module
2 x 2 802.11N MIMO mini-PCI Modules
WLM200N5-23ESD-4.9
WIRELESS-N 4.9GHz 23DBM NETWORK MINI PCI ADAPTER WITH
ESD
Features
•
Atheros XSPAN family chipset
•
4.9GHz IEEE 802.11n compliant and backward compatible with 802.11a
•
4.9GHz Single-band MIMO 2x2 spatial multiplexing technique
•
Maximum 20dBm output (per chain)/23dBm aggregate
•
Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV
•
Supports up to 300Mbps physical data rates
•
Delivers 10 times the throughput and nearly twice the range of legacy 802.11a network
•
Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard)
•
2 x MMCX or 2 x U.FL Antenna Connectors
②
①
Technical Specifications
Chipset
Host Interface
Operating
Voltage
Atheros AR9220
PCI Interface v2.3 (Type III-A Mini PCI form factor)
3.3 VDC
Power
Consumption
11a Cont. Tx @6M
11na Cont. Tx@HT20 MCS0
11na Cont. Tx@HT40 MCS0
11a Cont. Rx
Standby
Antenna
Connector
2 x MMCX or 2 x U.FL
IEEE 802.11a :
Data Rate
IEEE 802.11a/n:
Modulation
Techniques
Radio & EMC
Certification
RoHS
Compliance
Temperature
Range
②
54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps
1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.)
20MHz
2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.)
IEEE 802.11n :
Frequency
Range
3.5W
3W
3W
0.9W
0.7W
6Mbps
4.900-4.98 GHz
OFDM: BPSK, QPSK, 16QAM, 64QAM
FCC
Yes
Operating: -20ºC to 70ºC
Storage: -40ºC to 90ºC
Operating:5% to 95% (non-condensing)
Storage: Max.90% (non-condensing)
59.6mm x 51.5mm x 6mm
Humidity
Dimension
WLM200N5-23 ESD MIMO MINIPCI CARD RADIO
DataRate
6-24Mbps
36Mbps
48Mbps
54Mbps
802.11a
5GHz 11n
HT 20
DataRate
TX Power
MCS 0/8
MCS 1/9
MCS 2/10
MCS 3/11
MCS 4/12
MCS 5/13
MCS 6/14
MCS 7/15
20dBm
20dBm
19dBm
19dBm
17dBm
16.5dBm
16dBm
16dBm
Data Rate
802.11a
5GHz 11n
HT 20
6M
9M
12M
18M
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
(per chain)
Sensitivity
(2 chains)
-97dBm
-97dBm
-96dBm
-94dBm
-97dBm
-94dBm
-92dBm
-87dBm
-84dBm
-80dBm
-79dBm
-77dBm
TX SPECIFICATIONS
TX Power
21dBm
20dBm
19dBm
18dBm
Tolerance
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
RX SPECIFICATIONS
Tolerance
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
Tolerance
±2dB
±2dB
±2dB
±2dB
ESD CABLE SPECIFICATION
26cm length
Copper
End of ESD Cable tied to Earth Ground
Cable Dimensions
Terminal Material
Attachment Procedure
③
Ordering Information
CODES
Antenna Connectors type
Carton Dimension
WLM200N5-23 6AA1300ESD4.9
U.FL
For 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG
For 250pc (pcs/ctn), 0.45m * 0.45m * 0.24m / 0.006 = 8.1KG
WLM200N5-23 6AB1300ESD4.9
MMCX
For 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG
For 250pc (pcs/ctn), 0.45m * 0.45m * 0.24m / 0.006 = 8.1KG
Module grounding cable included
Depends on your order configuration
Configurations are subject to change without notice
Please contact Compex sales representatives for other available configurations
Compliance Information
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules . Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation. This device must accept
any interference received, including interference that may cause
undesired operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be
installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
(2) Any changes or modifications not expressly approved by the grantee
of this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate
the equipment.
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered valid and
the FCC ID can not be used on the final product. In these circumstances,
the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
WARNING: The antenna gain which being use must less than 17 dBi.
(1) the modules FCC ID is not visible when installed in the host, or
(2) if the host is marketed so that end users do not have straight forward
commonly used methods for access to remove the module so that the FCC ID
of the module is visible; then an additional permanent label referring to the
enclosed module:
Contains Transmitter Module FCC ID: TK4WLM200N523-49 or Contains FCC ID:
TK4WLM200N523-49 must be used.
Dimensions Drawing
Compex Systems Pte Ltd
135 Joo Seng Road, PM Industrial Building #08-01,
Singapore 368363
Tel: (65) 6286 2086
Fax: (65) 6280-9947
Email: sales@compex.com.sg
Compex (Suzhou) Co Ltd
NO.12, ChuangTou Industrial Square,
LouFeng North, Suzhou Industrial Park,
Suzhou, Jiangsu Province, China 215122
Tel: (86)-512-62950050
Fax: (86)-512-62950026
Copyright © 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc.
Atheros and other trademarks are properties of their respective owners.
While every effort is made to ensure the information accurate, Compex does not accept liability for any errors or mistakes that may arise.
Specification is subject to change without notice. DS V: 2.2.1 Rocky100526
For more information, visit www.compex.com.sg

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:10:24 11:53:17+08:00
Create Date                     : 2012:10:24 11:40:29+08:00
Metadata Date                   : 2012:10:24 11:53:17+08:00
Document ID                     : uuid:dfa825bc-4554-452c-87ce-e525ee8312fb
Instance ID                     : uuid:ef34716c-cf04-4b62-8eb1-ff192594a692
Format                          : application/pdf
Title                           : Microsoft Word - WLM200N5-23ESD-4.9 UM_121024.doc
Creator                         : Ansem Lu
Has XFA                         : No
Page Count                      : 5
Author                          : Ansem Lu
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TK4WLM200N523-49

Navigation menu