Compex Systems WLM54A26ESD WIRELESS-A 26dBm NETWORK MINI PCI ADAPTER WITH ESD User Manual WLM54A26ESD um updated 100915

Compex Systems Pte Ltd WIRELESS-A 26dBm NETWORK MINI PCI ADAPTER WITH ESD WLM54A26ESD um updated 100915

UserManual.wiki >

Compex Systems >

WLM54A26ESD User Manual

user manual

Features • Compliant with IEEE 802.11a standard • Up to 26dBm output power with Built-in ESD Protection • RF ESD/EMP Immunity Threshold: 15KeV ① • Supports Atheros Proprietary "Super Mode" delivering up to 108 Mbps data link rate • High efficiency dual-PA design • High Performance combined with Low Power Consumption • Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard) • Single MMCX/U.FL Antenna Connector; External Antenna with Model name:C0053-ANG0003 /Gain:max.2dBi • Suitable for Embeded System or OEM Project • Affordable and Ideal for a Variety of Applications WIRELESS-A 26dBm NETWORK MINI PCI ADAPTER WITH ESD WLM54A26ESD

Technical Specifications Chipset Atheros AR5414 Host Interface 32-bit mini-PCI Type IIIA+ (1.85mm longer than IIIA type) Operating Voltage 3.3 VDC 11a Cont. Tx @6M 3.5W 11a Cont. Rx 1.9W Power Consumption Standby 1.4W Antenna Connector 1 x MMCX IEEE 802.11a: 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps Standards Conformance Super-A: 108Mbps 96Mbps 72Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 6Mbps5.150 ~ 5.350 GHz,5.470 ~ 5.725GHz, 5.725 ~ 5.850 GHz (US & Canada) 5.150 ~ 5.350 GHz,5.470 ~ 5.725GHz, 5.725 ~ 5.875 GHz (Europe) Frequency Range IEEE 802.11a 5.150 ~ 5.250 GHz,5.250 ~ 5.350GHz, 5.470 ~ 5.725GHz(Japan) Modulation Techniques OFMD: BPSK, QPSK, 16-QAM, 64-QAM Certification FCC, CE ROHS Compliance Yes Temperature Range Operating: -20ºC to 70ºC Storage: -40ºC to 90º Humidity Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) Dimension 59.6 x52.8x 5.5 mm Weight 20 grams WLM54A-26-ESD MINIPCI CARD RADIO TX SPECIFICATIONS RX SPECIFICATIONS 5GHz 5180MHz 5320MHz 5600MHz 5700MHz 5785MHz 5825MHz Tolerance DataRate Sensitivity Tolerance6Mbps 26dBm 26dBm 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 6Mbps -96dBm ±2dB9Mbps 26dBm 26dBm 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 9Mbps -96dBm ±2dB12Mbps 26dBm 26dBm 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 12Mbps -95dBm ±2dB18Mbps 26dBm 26dBm 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB 18Mbps -88dBm ±2dB26dBm 26dBm 26dBm 26dBm 26dBm 26dBm +1.0/-1.5 dB24Mbps 24Mbps -86dBm ±2dB 36Mbps 24dBm 24dBm 24dBm 24dBm 24dBm 24dBm +1.0/-1.5 dB 36Mbps -83dBm ±2dB48Mbps 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm +1.0/-1.5 dB 48Mbps -79dBm ±2dB54Mbps 22dBm 22dBm 22dBm 22dBm 22dBm 22dBm +1.0/-1.5 dB5GHz54Mbps -76dBm ±2dB ADJUSTABLE CHANNEL SIZE SUPPORT 5MHz 10MHz 20MHz 40MHz ESD CABLE SPECIFICATIONS Cable Dimensions 26cm length Terminal Material Copper Attachment Procedure End of ESD Cable tied to Earth Ground ORDERING INFORMATION② CODES Version CARTON DIMENSIONS WLM54A26ESD 8BS ESD For 50 pcs / carton, 0.45m*0.45m*0.24m/0.006=8.1KG  Module grounding cable included ② Configurations are subjected to change without notice Please contact Compex sales representatives for other available configurations

Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. WARNING: This Wireless Mini PCI Adapter does not support ad-hoc mode Function FCC ID: TK4-WLM54A26ESD

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

DIMENSIONS DRAWING

Navigation menu