Compex Systems WLM54GP23ESD WIRELESS-G 23DBM NETWORK MINIPCI ADAPTER WITH ESD User Manual

Compex Systems Pte Ltd WIRELESS-G 23DBM NETWORK MINIPCI ADAPTER WITH ESD

UserManual.wiki >

Compex Systems >

WLM54GP23ESD User Manual

user manual

Features • 2.4GHz IEEE 802.11 b/g standard • Output Power of up to 23dBm @ b/g Band Built in ESD Protection • RF ESD/EMP Immunity Threshold: 15KeV ① • ② • Extended Distances and High Speeds Due to Better Output Signal Power • High Performance with Low Power Consumption • Multi-Country Roaming Support (IEEE802.11d) • 1 x U.FL /MMCX Antenna Connector • Suitable for Embedded System or OEM Project • Affordable and Ideal for a Variety of Applications WLM54G -23dBm ESD WLM54G(Super-G)-23dBm ESD IWAVEPORT WLM54GP23ESD WIRELESS-G 23DBM NETWORK MINIPCI ADAPTER WITH ESD

Technical Specifications WLM54G-23d ESD WLM54G (Super-G) – 23 ESD Chipset Atheros AR2413a Atheros AR2414 Host Interface PCI Interface v2.3 (Type III-B Mini PCI form factor) Operating Voltage 3.3 VDC Power Consumption 2.5W Antenna Connector 1 x U.FL/MMCX Antenna Connector IEEE 802.11b: 11Mbps 5.5Mbps 2Mbps 1Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps IEEE 802.11g: Automatically fallback to 5.5Mbps, 2Mbps, 1Mbps Standards Super–G: 108Mbps 96Mbps 72Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 6Mbps 2.412GHz ~ 2.462GHz (US & Canada) 2.412GHz ~ 2.472GHz (Europe) Frequency Range IEEE 802.11b/g: 2.412GHz ~ 2.484GHz (Japan) Modulation Techniques OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK M Certificate FCC,CE ROHS Compliance Yes Environment Specifications Operating: -20ºC to 70ºC Storage: -40ºC to 90ºC Humidity 5% to 95% (non-condensing) Dimension 59.6 x 46 x 3.8 (mm) Weight 15 grams WLM54G 23 MINIPCI CARD RADIO OPERATING FREQUENCY 2.412~2.484GHz TX SPECIFICATIONS RX SPECIFICATIONS DataRate TX Power Tolerance DataRate Sensitivity Tolerance1Mbps 23dBm +1.0/-1.5 dB 1Mbps -93dBm ±2dB 2Mbps 23dBm +1.0/-1.5 dB 5.5Mbps 23dBm +1.0/-1.5 dB 802.11b 11Mbps 23dBm +1.0/-1.5 dB 802.11b 11Mbps -90dBm ±2dB 6Mbps 23dBm +1.0/-1.5 dB 9Mbps 23dBm +1.0/-1.5 dB 12Mbps 23dBm +1.0/-1.5 dB 6Mbps -93dBm ±2dB 18Mbps 23dBm +1.0/-1.5 dB 24Mbps 23dBm +1.0/-1.5 dB 36Mbps 22dBm +1.0/-1.5 dB 48Mbps 19dBm +1.0/-1.5 dB 802.11g 54Mbps 17dBm +1.0/-1.5 dB 802.11g 54Mbps <-72dBm ±2dB ESD CABLE SPECIFICATION Cable Dimensions 26cm length Terminal Material Copper Attachment Procedure End of ESD Cable tied to Earth Ground ORDERING CONFIGURATIONS① CODES SPEED CARTON DIMENSIONS WLM54G 6A1300P23ESD Up to 54 Mbps For 50 pcs / carton, 0.45m*0.45m*0.24m/0.006=8.1KG WLM54G 6B1300P23ESD Up to 54 Mbps For 50 pcs / carton, 0.45m*0.45m*0.24m/0.006=8.1KG  Must use included grounding cable ② Depends on Order Configuration ③ Configurations are subjected to change without notice

COMPLIANCE INFORMATION FCC NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: TK4-WLM54GP23ESD ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Caution: Exposure to Radio Frequency Radiation. To comply with the FCC RF exposure compliance requirements, the following antenna installation and device operating configurations must be satisfied: For configurations using an approved external antenna, the separation distance between the antenna and any person’s body (including hands, wrists, feet and ankles) must be at least 20cm (8 inch). The transmitter shall not be collocated with other transmitters or antennas. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. IMPORTANT NOTE REGARDING ANTENNA USE Antenna Use (Point to Multipoint) 1x1 Operation Chain1

DIMENSIONS DRAWING

Navigation menu