Compex Systems WPJ344 WIRELESS ACCESS POINT User Manual ah

Download:
Mirror Download [FCC.gov]
Document ID	2366458
Application ID	iwb+behohNpt2WYhwACXoQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.8kB (647558 bits)
Date Submitted	2014-08-22 00:00:00
Date Available	2014-08-22 00:00:00
Creation Date	2014-08-21 14:58:01
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2014-08-21 14:58:12
Document Title	ah
Document Creator	Microsoft® Office Word 2007
Document Author:	ADELINE

Dual Band Gigabit Wireless Embedded Board
Model: WPJ344
Features
•
CompexWRT and OpenWRT firmware supported
•
Qualcomm-Atheros 533MHz Networking Processor,WASP Series
•
Dual Radio Solution (one 2x2 11n 2.4GHz on-board radio and one miniPCIe
slot that supports all Compex WLE series, including 802.11ac radio)
•
Integrated 48V 802.3af (alternative 24V PoE available)
•
Support 2 x Gigabit Ethernet Port
•
Optional: support USB Extension
Applications
•
Dual Band, Dual Concurrent AP
•
802.11bgn AP
•
Point to Point / Point to MultiPoint
•
Base Station
•
CPE
ac wave series
Technical Specifications
System Information
Processor
Qualcomm-Atheros AR9344 MIPS 74Kc
System Memory
128MB(64*2) DDR2
NOR Flash
8MB (max 16MB optional)1
MiniPCI Slot
1 x 9.2mm MiniPCIe slot
Ethernet
2 Gigabit ports with Auto-MDI/X
Extras
Serial Port2, JTAG3, Reset Button, Surge Arrestor, Watchdog Timer
Power Solutions
High voltage
Low voltage
Power Consumption
RoHS Compliance
Humidity
Temperature Range
Dimension
2.4GHz
On-board Radio
DC Jack Input:24-48V, Passive PoE: 24-48V, IEEE 802.3af/at PoE
Standard 802.3af PoE input:(Optional)4
DC Jack Input: 9-24V, Passive PoE: 12-24V
7W
Yes
Operating: 5% to 95% (non-condensing)
Storage: Max.90% (non-condensing)
Operating:-20ºC to 70ºC
Storage: -40ºC to 90ºC
117 x 105 x 17 (mm)
Data Rate
1M
11M
6M
Transmit
54M
Power
HT20 MCS0
HT20 MCS7
HT40 MCS0
HT40 MCS7
Data Rate
6M
54M
Receiver
HT20 MCS0
Sensitivity
HT20 MCS7
HT40 MCS0
HT40 MCS7
Encryption
Client
Latency
WPA2-PSK
<100ms
Max of concurrent
associations
TCP
[each client upload and download
randomly from 384Kbps to 768Kbps]
Aggregate Power
25dBm
23dBm
25dBm
22dBm
25dBm
22dBm
25dBm
22dBm
-90dBm
-75dBm
-90dBm
-72dBm
-88dBm
-70dBm
UDP
[each client upload
and download 2Mbps]
Single radio
Dual radio
Single radio
Dual radio
40 clients
70clients
(35 per radio)
20 clients
30clients
(15 per radio)
1 Depends on Order Configurations
2 Serial Port is a 4-pin header (TTL) + Serial Converter is available to change the TTL signals on board to RS232 signals
for debugging.Configurations are subjec to change without notification
3 JTAG Port is a 14-pin header + JTAG kit is for writing your own developed loader and firmware directly
4 In this mode, it can be powered from 802.3af/3at PoE switches and PoE injectors. It is able to return a PD classification
of 0. The DC jack can accept a voltage range of 24V to 56V but the PoE input needs a minimum voltage of 36V
Optional configuration
USB board
External board:
can support 3 x USB 2.0 ports and
1 x miniPCIe-based USB 2.0 only interface
(e.g. 3G modems)
USB Extension
(USB HUB BOARD-1.00-ST)
PSE pass-thru module: Optional module to
allow power to pass through the 2nd Ethernet
port to an IEEE 802.3af/at compatible device,
such as a surveillance camera
PSE pass-thru module
(P-PSE-M-6A03-SPL)
Related Products
802.11ac 5GHz miniPCIe
WLE900VX
WLE600V5-23
Gigabit Power over Ethernet
POE2408
WLE900V5-23
- Output Voltage: 24VDC
- Max Output Watts: 19W
Compex embedded board extended applications list
Extended applications
Model
WPJ344
WPJ558
WPJ342
WPJ531
USB signal
Support 1× USB 2.0 port
Support 1× USB 2.0 port
or
PCIe slot Support Third
Party 3G/LTE Module
Support 1× USB 2.0 port
or
PCIe slot Support Third
Party 3G/LTE Module
Support 1× USB 2.0 port
or
PCIe slot Support Third
Party 3G/LTE Module
WP546
Support 2× USB 2.0 port
WP543
Support 2× USB 2.0 port
USB External board
(USB HUB BOARD-1.00-ST)
support 3 x USB 2.0 ports
and
1 x miniPCIe-based USB
2.0 only interface
support 3 x USB 2.0 ports
and
1 x miniPCIe-based USB
2.0 only interface
802.3af PoE pass-thru
802.3af
PoE power supply
Optional
(PSE pass-thru module)
support
support
Optional
(802.3af module)
Optional
(802.3af module)
Optional
(PSE pass-thru module)
support
support
Product application:
Camera
PSE pass-thru module
Gigabit Power over Ethernet
WPJ344 with PSE pass-thru module
can support 3 x USB 2.0 ports or
1 x miniPCIe-based USB 2.0 only interface
WPJ344 with USB External board
Dimension Drawing
Dimension Drawing with USB external board
Ordering Information
Item Code
WPJ344HV 6A06PC8128BR
WPJ344LV 6A06PC8128BR
WPJ344HV 6A6BCW8128BRPSE
WPJ344LV 6A6BCW8128BRPSE
WPJ344HV 6A06PC16128BR
WPJ344LV 6A06PC16128BR
P-PSE-M-6A03-SPL
USB HUB BOARD-1.00-ST
Compex Systems Pte Ltd
135 Joo Seng Road #08-01
Singapore 368363
Tel: +65 6286 2086
Fax: +65 6280 9947
Email: sales@compex.com.sg
Compex (Suzhou) Co Ltd
No.12 ChuangTou Industrial Square
LouFeng North, Suzhou Industrial Park
Suzhou, Jiangsu Province China 215122
Tel: +86 512 62950050
Fax: +86 512 62950026
Version
CompexWRT
CompexWRT
CompexWRT
CompexWRT
CompexWRT
CompexWRT
PSE module L/H voltage Power NOR Flash Memory
NO
High Voltage (48V)
NO
Low Voltage (24V)
8MB
128MB
Yes
High Voltage (48V)
Yes
Low Voltage (24V)
NO
High Voltage (48V)
16MB
128MB
NO
Low Voltage (24V)
PoE pass-Thru module
USB External board
www.compex.com.sg
www.facebook.com/compexsystems
Copyright 2013 Compex Systems. All rights reserved. COMPEX and the COMPEX logo are registered trademarks
of COMPEX Inc. While every effort is made to ensure the information is accurate, Compex does not accept
liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : ADELINE
Create Date                     : 2014:08:21 14:58:01+08:00
Modify Date                     : 2014:08:21 14:58:12+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:08:21 14:58:12+08:00
Creator Tool                    : Microsoft® Office Word 2007
Format                          : application/pdf
Title                           : ah
Creator                         : ADELINE
Document ID                     : uuid:0b27fc66-894a-47fd-b284-ce60f1c39efa
Instance ID                     : uuid:349db348-6e3b-4ffd-bd77-3f0ee59db01e
Producer                        : Microsoft® Office Word 2007
Page Count                      : 6

EXIF Metadata provided by EXIF.tools