Compupal Group NS-CSPBT02 Portable Bluetooth Speaker User Manual NS CSPBT02 BL GR PK PU 15 0320 QSG V2 EN ai

Compupal Group Corporation Portable Bluetooth Speaker NS CSPBT02 BL GR PK PU 15 0320 QSG V2 EN ai

Contents

Users Manual - NS-CLPBT02

Flat size (W×H): 360.04 × 120 mm.Final folded size: 60 × 60 mm.TURNING YOUR SPEAKER ON AND OFF• Press the button to turn your speaker ON or OFF. The blue LED blinks quickly and the speaker enters pairing mode.CONNECTING WITH BLUETOOTH1 Make sure that your Bluetooth device is turned on and within 33 feet (10 meters) of your speaker.2 On your speaker, press the button. Your speaker enters pairing mode, and the Bluetooth LED blinks. Your speaker remains in pairing mode for 30 seconds or until it pairs with a Bluetooth device. Note: Press and hold the button to return to pairing mode.3 Turn on your Bluetooth device and turn on Bluetooth. Set your device to pairing mode, then select NS-CSPBT02. See the instructions that came with your Bluetooth device for information about pairing.4 If you are asked for a password, enter 0000. When pairing is complete, the LED on your speaker lights solid blue.Quick Setup Guide | NS-CSPBT02-BL / NS-CSPBT02-GR / NS-CSPBT02-PK / NS-CSPBT02-PUBluetooth SpeakerCHARGING YOUR SPEAKER1 Connect the small end of your charging cable to the micro USB port underneath the cover on your speaker.2 Connect the other end to a USB charging port.Note: When the battery is low, the LED blinks red slowly. The speaker will have about 10 minutes of battery life left.Before using your new product, please read these instructions to prevent any damage.Top viewSide viewPACKAGE CONTENTS• Bluetooth speaker • USB cable• Quick Setup GuideFEATURES• Bluetooth streams music wirelessly• Rechargeable battery lasts for up to six hours• Use as a speakerphone, for hands-free talking• Built-in travel hook• Splash-proofLEDBlinks blue slowlyBlinks blueSolid blueDESCRIPTIONSpeaker is not connectedSpeaker is in pairing modeSpeaker is pairedTravel hookPower/pairing buttonVolume up/down buttonMicro USB charging port coverBottom of speakerYour speaker loses the Bluetooth connection if you...Turn o your speaker.Move the Bluetooth device out of range.Turn o your Bluetooth device.Turn o Bluetooth on your Bluetooth device.Connect your Bluetooth device to another Bluetooth device.To reconnect...Turn on your speaker. Your speaker searches for the last connected Bluetooth device and reconnects.Make sure that your Bluetooth device is within 33 feet of your speaker.Turn on your Bluetooth device, then make sure that Bluetooth is on.Turn on Bluetooth on your Bluetooth device.Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select “NS-CSPBT02” on your Bluetooth device.MicrophoneLED indicator LEDBeep and blinks red slowlySolid red Light turns oDESCRIPTIONLow batteryChargingFully charged5 To disconnect from the paired Bluetooth device, press and hold the button on your speaker for three seconds. Your speaker disconnects from the Bluetooth device and enters pairing mode again.RECONNECTING TO A PAIRED DEVICEWhen your speaker is not paired to a device, the LED blinks blue slowly.Note: If a device does not automatically reconnect, you may need to reselect “NS-CSPBT02” on your Bluetooth device.NS-CSPBT02-BL_GR_PK_PU_15-0320_QSG_V2_EN.ai 1 3/24/2015 9:55:50 AMNS-CSPBT02-BL_GR_PK_PU_15-0320_QSG_V2_EN.ai 1 3/24/2015 9:55:50 AMV2FINALFOR PRINT
USING YOUR SPEAKERUsing the travel hook1 Insert the knob at the top of the silicone strap into the hole at the top of the speaker. Listening to music1 Press the button on your speaker, then connect to your Bluetooth device. 2 Begin playback on your Bluetooth device. 3 Adjust the volume on your speaker by pressing the + or - buttons.Note: Use the controls on your Bluetooth device to control playback.Taking a call1 Press the button briey to accept an incoming call. The LED lights blue and fades in and out. ORPress and hold the button to reject an incoming call. The LED blinks red once.2 Press the button during a call to end the call. The LED blinks red once. TROUBLESHOOTING LEGAL NOTICESFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC CautionChanges or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communica-tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encour-aged to try to correct the interference by one or more of the following measures:V2 ENGLISH 15-0320LEDFades blue in and outBlinks red onceDESCRIPTIONCurrently connected to a callCall rejected or call ended • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent form that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RSS-Gen & RSS-210 statement:This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RSS-102 Statement:This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.PROBLEMNo powerNo sound or low volume Cannot establish Bluetooth connectionMy Bluetooth device keeps unpairing“NS-CSPBT02” does not appear on my Bluetooth deviceSOLUTION• Make sure that your speaker’s battery is charged.• Make sure that your speaker is turned on.• Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and “NS-CSPBT02” is selected.• Turn up the volume on your speaker.• Turn up the volume on your Bluetooth device.• Make sure that your Bluetooth device is not muted.• Make sure that your speaker is not paired to another Bluetooth device.• Make sure that your Bluetooth device is not paired to another Bluetooth device.• Make sure your speaker is in pairing mode. If a connection has not been made in 30 seconds, the speaker exits pairing mode. Press and hold the button to reenter pairing mode.• Shorten the distance between your speaker and your Bluetooth device.• Turn your devices o, then on. Re-pair your speaker and your Bluetooth device.• Make sure that your speaker is not paired to another Bluetooth device.• Make sure that your speaker and Bluetooth device are both in pairing mode.• Make sure that your Bluetooth device supports the Bluetooth v4.0 protocol and below.• Make sure that your Bluetooth device is not connected to any other device.• Make sure that you have selected “NS-CSPBT02” on your Bluetooth device.• Shorten the distance between your speaker and your Bluetooth device.• If the battery on your Bluetooth device is low, recharge the battery.• If the battery on your speaker is low, recharge the battery.• Shorten the distance between your speaker and your Bluetooth device.• Put your speaker into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.ONEYEAR LIMITED WARRANTYVisit www.insigniaproducts.com for details.CONTACT INSIGNIA:1-877-467-4289 (U.S. and Canada)01-800-926-3000 (Mexico)www.insigniaproducts.comINSIGNIA is a trademark of Best Buy and its aliated companies.Registered in some countries.Distributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richeld, MN 55423 U.S.A.©2015 Best Buy. All rights reserved.Made in ChinaNS-CSPBT02-BL_GR_PK_PU_15-0320_QSG_V2_EN.ai 2 3/24/2015 9:56:01 AMNS-CSPBT02-BL_GR_PK_PU_15-0320_QSG_V2_EN.ai 2 3/24/2015 9:56:01 AM

Navigation menu