Computime CT-EM2606 ZigBee Module User Manual Module Specification

Download:
Mirror Download [FCC.gov]
Document ID	1113426
Application ID	+5eBuFZipb3GVkgPYIHm8w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.68kB (208474 bits)
Date Submitted	2009-05-20 00:00:00
Date Available	2009-05-20 00:00:00
Creation Date	2009-05-13 13:36:02
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-05-13 13:36:38
Document Title	Microsoft Word - Module Specification.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	cathy

CT-EM2606 ZigBee Ready RF Transceiver Modules
ZigBee- Ready RF Transceiver Modules
EM-2606 Series Specification
Computime Ltd.
All rights reserved
Confidential
1 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
Table of Content
1.
General Description ................................................................................................................. 3
2.
Applications ............................................................................................................................... 3
3.
Features..................................................................................................................................... 3
4.
Absolute Maximum Ratings .................................................................................................... 4
5.
Recommended Operating Conditions ................................................................................... 4
6.
Electrical Specifications........................................................................................................... 4
7.
Introduction................................................................................................................................ 6
8.
Typical application block ......................................................................................................... 6
9.
Pin Assignment......................................................................................................................... 7
10.
Pin Description.......................................................................................................................... 7
11.
Block Diagram........................................................................................................................... 9
12.
Circuit Description .................................................................................................................... 9
13.
SIF Module Programming and Debug Interface ................................................................ 10
14.
Power Management............................................................................................................... 10
15.
RF Frequency Detail .............................................................................................................. 11
16.
Antenna Design Considerations........................................................................................... 12
17.
Product Approvals .................................................................................................................. 13
18.
Mechanical Dimensions ........................................................................................................ 15
19.
Ordering Information .............................................................................................................. 16
20.
Document Revision History................................................................................................... 16
Computime Ltd.
All rights reserved
Confidential
2 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
ZigBee- Ready RF Transceiver Modules
1. General Description
The CT-EM2606 RF Transceiver Modules is compact surface mounted modules specially
designed for Ember ZigBee™ protocol stack for wireless networks, EmberZNet, based on
IEEE 802.15.4 standard in the 2.4GHz world-wide ISM band. The complete module is
only 25.4 x 32.3 x 4mm .They both integrate a 2.4GHz, IEEE 802.15.4-compliant
transceiver with a 16-bit network processor (XAP2b core) to run EmberZNet. They
contain embedded Flash and integrated RAM for program and data storage. It utilizes
the non-intrusive SIF module for powerful software debugging and programming of the
network processor.
2.
Applications
Home
automation &
building control
3.
Home
appliances &
alarms
Monitoring of
remote
systems
Lighting
controls
Sensor data
capturing
Features
„
Complete ZigBee-ready module with or without integrated chip antenna
„
Integrated IEEE 802.15.4 PHY and MAC layer
„
12MHz XAP2b 16-bit network processor core
„
Integrated FEM
„
Non-intrusive debug interface (SIF)
„
SPI interface for communication and controlled by the Host using the EmberZNet
Serial Protocol (EZSP)
„
Internal RC oscillator for timer
„
16 channels in the 2.4 GHz ISM band
„
On-chip regulator for 2.7-3.6V operation , three sleep low power modes
„
-15dBm------20dBm output power, SW controlled
Computime Ltd.
All rights reserved
Confidential
3 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
4.
Absolute Maximum Ratings
Test
Conditions
Parameter
Min.
Max.
Unit
Regulator voltage (VDD_PADS)
- 0.3
3.6
Voltage on nSSEL INT, MOSI, MISO, SCLK, nSSEL,
PTI_EN,
PTI_DATA,
nHOST_INT,
SIF_CLK,
SIF_MISO,
SIF_MOSI,
nSIF_LOAD,
SDBG,
LINK_ACTIVITY, nWAKE, nRESET
- 0.3
VDD_PADS+0.3
Storage temperature
- 40
+ 140
°C
Under no circumstances should the absolute maximum ratings given above be violated. Stress
exceeding one or more of the limiting values may cause permanent damage to the device.
5.
Recommended Operating Conditions
Test
Conditions
Parameter
Min.
Regulator input voltage (VDD_PADS)
2.7
Core input voltage (VDD_24MHZ, VDD_VCO,
VDD_RF, VDD_IF, VDD_PADSA, VDD_FLASH,
VDD_SYNTH_PRE, VDD_CORE)
1.7
Temperature range
- 40
6.
Typ.
Max.
Unit
3.6
1.8
1.9
+ 85
°C
Electrical Specifications
T=25℃, VCC = 3.0V, Fo =2450MHZ, if nothing else stated.
Parameter
Min
Operating frequency
2400
Typ.
Max
Unit
Condition / Note
2483.5
MHz
Programmable in 5MHz steps, 5
MHz steps for IEEE 802.15.4
compliance
Number of channels
16
Channel spacing
MHz
Input/output impedance
50
Ohm
Data rate
250
kbit/s
DSSS chip rate
Mc/s
Frequency stability
Transmit power
Computime Ltd.
-17
All rights reserved
For IEEE 802.15.4 compliance
+/-40
ppm
20
dBm
Confidential
For IEEE 802.15.4 compliance
Programmable from firmware
4 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
Parameter
Min
Typ.
Max
Unit
Condition / Note
Sensitivity
-98
dBm
PER = 1% PER, 20byte packet
defined by IEEE 802.15.4 Boost
mode
Adjacent channel rejection
+/-5 MHz
35/35
dB
IEEE 802.15.4 compliance at -82
dBm
Adjacent channel rejection
+/-10 MHz
40/40
dB
IEEE 802.15.4 compliance at -82
dBm
Co-channel rejection
Supply voltage
-6
2.7
dB
3.6
36
mA
Max RX sensitivity (normal mode)
38
mA
Max RX sensitivity (boost mode)
Current consumption,
TX mode
190
mA
Deep sleep current
5.0
μA
Current consumption,
RX mode
Flash Memory
Kbit
MCU clock frequency
RC
OSCILATOR
frequency
12
MHz
10
KHZ
Computime Ltd.
All rights reserved
Confidential
5 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
7.
Introduction
The CT-EM2606 modules are specially designed for ZigBee application. They provide a
fast jump start design for system integrators or electronic designers wishing to use
ZigBee wireless technologies. The module contains qualified RF hardware and enough
processor power to run the EmberZNet stack or other ZigBee network stack (depending
on version), making it a powerful platform for building wireless networking products.
ZigBee Coordinators (ZC), ZigBee Routers (ZR), and ZigBee End Devices (ZED) are all
supported and are programmed onto the module together with a custom application.
Minimal RF design experience is need to use CT-EM2606 modules.
8. Typical application block
NWAKE
NHOST_INT
NSSEL
SCLK
MISO
MOSI
HOST
UP
Debug and
programming
interface
NREST
PTI_EN
PTI-DATA
SIF_CLK
SIF_MISO
SIF_MOSI
NSIF_LOAD
SDBG
2.7- 3.6V
Ember
FEM
EM260
LINK_ACTIVITY
Computime Ltd.
All rights reserved
Confidential
6 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
9.
Pin Assignment
TOP VIEW
10. Pin Description
Pin#
Signal
Direction
Description
SIF_CLK
DI
SIF Interface clock
SIF_MISO
DO
SIF Interface master in/slave out
SIF_MOSI
DI
SIF Interface master out/slave in
nSIF_LOAD
DI/DO
SDBG
DO
Spare Debug Signal
LINK_ACTIVITY
DO
Link and Activity signal
GROUND
GND
Ground
GROUND
GND
Ground
GROUND
GND
Ground
10
GROUND
GND
Ground
11
GROUND
GND
Ground
12
GROUND
GND
Ground
13
IDLE_EN
Computime Ltd.
All rights reserved
SIF Interface load strobe
Enable the FEM in deep sleep mode , Active high, in other state,
set it in low level
Confidential
7 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
14
GROUND
GND
15
VBRD
PI
Power Supply Input
16
nRESET
DI
Reset, active low
17
MOSI
DI
SPI Data, Master Out/Slave In
18
MISO
DO
SPI Data, Master In/Slave Out
19
SCLK
DI
SPI Clock
20
GROUND
GND
21
nRTS
DO
UART RTS
22
nSSEL_INT/nCTS
DI
SPI Slave Select
23
PTI_EN
DO
PTI Frame signal
24
PTI_DATA
DO
PTI Data signal
25
TXD
DO
UART TXD
26
nHOST_INT/RXD
DO/DI
Host Interrupt Signal
27
nWAKE
DI
Wake Interrupt Signal
28
GROUND
GND
Computime Ltd.
All rights reserved
Ground
Ground
Ground
Confidential
8 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
11. Block Diagram
2.7 – 3.6V
16 Bit Network Processor
Rout
to
HOST
User
Application
TM
Zigbee
Network
IEEE 802.15.4
RF Transceiver
RF FEM
IEEE 802.15.4
MAC
Figure 5 : Block Diagram
12. Circuit Description
The module contains an IEEE 802.15.4 compliant RF transceiver, high speed oscillator,
RC oscillator and RF FEM . The module is intended to running the Ember ZigBee
software or other ZigBee network implementation, depending on the specific version.
The application software together with the ZigBee protocol software stack can be
programmed in Flash memory through SIF module, using an evaluation board from
Ember InSight Desktop.
To support user-defined applications, the module exposes the Ember Serial API over the
SPI, which allows application development to occur on a Host microcontroller of choice.
In addition to the four SPI signals, two additional signals, nHOST_INT and nWAKE,
provide an easy-to-use handshake mechanism between the Host and the module. Also,
an integrated voltage regulator, power-on-reset circuitry, sleep timer, and low-power
sleep modes are available. The deep sleep mode draws less than 5μA allowing products
to achieve long battery life.
For further details on the transceiver (Ember EM260), please consult data sheet at
http://www.ember.com
Computime Ltd.
All rights reserved
Confidential
9 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
13. SIF Module Programming and Debug Interface
SIF is a synchronous serial interface developed by Cambridge Consultants Ltd. It is the
primary programming and debug interface of the CT-260. The SIF module allows external
devices to read and write memory-mapped registers in real-time without changing the
functionality or timing of the XAP2b core.
The SIF interface provides the following:
ƒ
ƒ
ƒ
ƒ
IC production test (especially analog)
PCB production test
Firmware download
Product control and characterization
The pins are:
ƒ
ƒ
ƒ
ƒ
SIF_LOADB
SIF_CLK
SIF_MOSI
SIF_MISO
The maximum serial shift speed for the SIF interface is 48MHz. SIF interface accesses
can be initiated even when the chip is in idle, deep sleep or power down modes. An edge
on nSIF_LOAD wakes the chip to allow SIF cycles.
14. Power Management
The module supports four different power modes: active, idle, deep sleep, and power
down.
Active mode is the normal, operating state of the module.
While in idle mode, code execution halts until any interrupt occurs. All modules including
the radio continue to operate normally. The EmberZNet stack automatically invokes idle
as appropriate.
Deep sleep mode and power down mode both power off most of the functions, including
the radio, and leave only the critical chip functions powered. The internal regulator is
disabled. All output signals are maintained in a frozen state. Upon waking from deep
sleep or power down mode, the internal regulator is re_enabled. Deep sleep and power
down result in the same sleep current consumption. The two sleep modes differ as
follows: the module can wake on both an internal timer and an external signal from deep
sleep mode; power down mode can only wake on an external signal.
Computime Ltd.
All rights reserved
Confidential
10 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
15. RF Frequency Detail
The following table shows the RF channels as defined by the IEEE 802.15.4 standard.
RF channel
Frequency
11
2405MHz
12
2410MHz
13
2415MHz
14
2420MHz
15
2425MHz
16
2430MHz
17
2435MHz
18
2440MHz
19
2445MHz
20
2450MHz
21
2455MHz
22
2460MHz
23
2465MHz
24
2470MHz
25
2475MHz
26
2480MHz
The output power level of em250 can be configured in the range -32 to 3dBm and the
gain of FEM is 17dB, So the module output can controlled in range -15 to 20dBm. The RF
transceiver uses direct sequence spread spectrum (DSSS) with 2 Mchip/s chip rate,
giving a raw data rate of 250 kbit/s. The modulation format is Offset – Quadrature Phase
Shift Keying (O-QPSK). It is robust even under noisy environments when sharing the
same frequency band with other applications.
The use of RF frequencies and maximum allowed RF power should according to different
national regulations. The CT-260 is complying with the applicable regulations for the
world wide 2.4GHz ISM band.
[Subject to final approval: Specifically it complies with the European Union R&TTE directive
meeting EN 300 328 and EN300 440 class 2. It also meets the FCC CFR47 Part15 regulations for use
in the US and the ARIB T-66 for use in Japan.]
Computime Ltd.
All rights reserved
Confidential
11 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
16. Antenna Design Considerations
The CT-EM2506 module includes an integrated PCB trace antenna. An optional MMCX
connector can be specified, enabling connection to a 50-ohm external antenna of the
user’s choice..
The PCB antenna employs an F-Antenna topology that is compact and supports an
omni-directional radiation pattern. To maximize antenna efficiency, an adequate ground
plane must be provided on the host PCB. If positioned correctly, the ground plane on the
host board under the module can contribute significantly to antenna performance.
The position of the module on the host board and overall design of the product enclosure
contribute to antenna performance. Poor design effects radiation patterns and can result
in reflection, diffraction, and/or scattering of the transmitted signal.
Here are some design guidelines to help ensure antenna performance:
• Never place the ground plane or route copper traces directly underneath the
antenna portion of the module.
• Never place the antenna close to metallic objects.
• In the overall design, ensure that wiring and other components are not placed near
the antenna.
• Do not place the antenna in a metallic or metallized plastic enclosure.
• Keep plastic enclosures 1cm or more from the antenna in any direction.
Test at 2440MHZ
__
Vertical Polarization Gain
(dBi)
Avg : -14.8
---
Horizontal Polarization Gain
(dBi)
Avg : -3.4
Computime Ltd.
All rights reserved
Confidential
12 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
17. Product Approvals
17.1 FCC Approvals
The CT-EM2606 has been designed to meet all national regulations for World-wide use.
Using the integrated antenna it conforms to FCC CFR 47 Part 15 (USA).
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The device CT-EM2606 carries FCC authorization and is marked with the FCC ID
Number. Whilst any device into which this authorized module is installed will not normally
be required to obtain FCC authorization, this does not preclude the possibility that some
other form of authorization or testing may be required for the finished device.
When the CT-EM2606 module is integrated inside another device/product, then the
outside surface of that device/product must display a label referring to the enclosed
module. This exterior label can use wording such as “Contains Transmitter Module
FCC ID:DICT-EM2606” or “Contains FCC ID: DICT-EM2606”, although any similar
wording that expresses the same meaning may be used.
To meet the Section 15.209 emission requirements in the restricted frequency
bands of Section 15.205, the transceiver transmitter power for the CT-EM2606
module needs to be reduced from the typical maximum setting on the upper two
channels (2475 MHz and 2480 MHz). Maximum values are TBD.
FCC statement：
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Computime Ltd.
All rights reserved
Confidential
13 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
17.2 CE Certificate
With the integrated antenna the CT-EM2606 has been tested and conforms to the
following standards:
• Radio: ETSI EN300 328 V1.6.1
• EMC: ETSI EN301 489-17 V1.2.1
• EMC: ETSI EN301 489-1 V1.6.1
• Safety: IEC/EN60950-1
If the CT-EM2606 module is incorporated into an OEM product, the OEM product
manufacturer must ensure compliance of the final product to the European EMC, and low
voltage/safety standards. A Declaration of Conformity must be issued for each of these
standards and kept on file as described in the R&TTE Directive. The final product must
not exceed the specified power ratings, as specified in this specification. If any of these
specifications are exceeded in the final product then a submission must be made to a
notified body for compliance testing to all of the required standards
Computime Ltd.
All rights reserved
Confidential
14 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
18. Mechanical Dimensions
25.4
4.1
3.81
2.54
10.52
1.53
22.61
1.53
2.79Typ 28 pads
1.78Typ 28 pads
0.38
5.2
2.54 Pitch Typ
32.4
2.54
1.91
23.22
1.6
Unit in mm
Computime Ltd.
All rights reserved
Confidential
15 / 16
CT-EM2606 ZigBee Ready RF Transceiver Modules
19. Ordering Information
Ordering Part Number
CT-EM2606
Description
ZigBee-ready RF module, 1kB Flash, PCB
trace antenna, 20dBm Version FCC/CE
certificate
20. Document Revision History
Document Revision
change
1.0
Draft
Computime Ltd.
All rights reserved
Confidential
16 / 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:05:13 13:36:38+08:00
Create Date                     : 2009:05:13 13:36:02+08:00
Metadata Date                   : 2009:05:13 13:36:38+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Module Specification.doc
Creator                         : cathy
Document ID                     : uuid:daac3b6b-6b7a-45bd-acda-dd9052694c8a
Instance ID                     : uuid:f9a3b3b5-232f-4121-bf1c-af8c5236343d
Page Count                      : 16
Author                          : cathy

EXIF Metadata provided by EXIF.tools