Comtec Systems CT-170 LCD Monitor User Manual Introduction Main Features

Download:
Mirror Download [FCC.gov]
Document ID	151396
Application ID	mng5jG/Ht6JV/bJAda9M+w==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.81kB (210146 bits)
Date Submitted	2001-05-24 00:00:00
Date Available	2001-05-21 00:00:00
Creation Date	2000-05-21 09:57:22
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-05-21 14:52:58
Document Title	Introduction & Main Features
Document Creator	Microsoft Word 9.0
Document Author:	compaq

USER’S GUIDE
OPERATION.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help.
NOTE : The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the
equipment.
3
How to install
……………………………..
………………………….
……………………………..
How to control the menu on screen
Pivot
(*option)
Power Supply and Power Management System
……………….
A Trouble Shooting
………………………………..
10
Specifications
……………………………….
10
………………………………..
12
Mode Supported
Analog PC Graphics Port Signal Descriptions
Base Ass’y Alteration and Installation
…………………..
……………………………
13
14
vivid screen and crisp color.
• It is easy to control the resolution from SXGA(1280*1024), XGA(1024*768),
SVGA(800*600) to VGA (640*480). It detects and configures automatically
the optimal characteristics of input frequency.
• While receiving the output RGB video signal from computer, the monitor can
display it up to 16 million colors.
• The user can set screen automatically by one-touch pressing. (AUTO key)
• The user can adjust the angle(90°) of the TFT LCD monitor according to
customer’s convenience. It must install Pivot software to make 4:3 frame to
3:4 frame.
• It provides a power saving function (DPMS).
• It provides “Plug-and-Play” so you may install this monitor easily.
• The emission of electromagnetic waves that can be harmful to the human
body has been minimized.
• Do not open the inside of the monitor. If needed, contact with A/S center.
2. If the following problem occurs, disconnect the plug and contact our
service center.
• When some or whole part of monitor is exposed to excessive humidity or
moisture.
• In case there is a strange sound, smell, or smoke inside the monitor.
If the power cable is damaged, be extremely careful when disconnecting the
plug.
How to install
1.
Attention Point to install
• Do not use this product on an unstable place.
- This product may fall, causing serious damage to the product.
• In the well-ventilated place, it is a good place where it is installed.
• Do not put the monitor in a damp place and close to a heating installation.
- It may be cause of electric shock and breakdown.
• Do not put the metal or heavy goods on this product.
- It may be cause of electric shock, a fire and breakdown.
• Do only install the power cord and adapter in the enclosed box.
• Driver Diskette
• Speaker Cable
• Pivot Install CD
(*option)
If any of the above items are damaged or missing, please contact your
customer service center as soon as possible.
3. Installing the monitor
3.1 Connecting the LCD monitor with computer
1. Turn off the computer before connecting the monitor
2. Connect the signal cable from PC signal port to Monitor signal port.
3. Connect the audio cable from PC audio port to Monitor audio port.
4. Plug in the AC/DC adapter, and connect the DC connector to the DC
Port on the back of the monitor.
5. Turn on the computer, then “Plug-and-Play” will run automatically. At
this time, you should install the driver in driver diskette.

How to control the menu on screen
AUTO
POWER LED
POWER SWITCH
UP
LEFT
MENU
RIGHT
DOWN
SELECT

1. Names of front side, and their use
• AUTO Key (AUTO)
• Menu Key (MENU)
: Operates AUTO Adjust without opening OSD menu.
: Opens the OSD display and closes OSD menu
display.
value of the selected item in submenu.
/ opens Volume menu without opening OSD menu.
• Select Key (SELECT)
: Select Icons or functions in OSD menu and
submenu.
• Power Key (POWER)
: Turns the monitor on / off.
• Power LED
: Green(normal operation). Yellow (DPMS mode).
No MENU on display
OSD Main MENU
Sub-MENU
AUTO
Operates auto configuration Directly
MENU
Opens OSD Main menu
Closes OSD main
menu
Returns to OSD
main menu
UP
Opens Brightness menu
DOWN
Opens Contrast menu
RIGHT
Opens Volume menu
LEFT
Opens Volume menu
SELECT
Moves icon to the
Right in OSD Menu

Moves icon to the
Left in OSD Menu
Selects item
Increases the value
of the selected item
Decreases the value
of the selected item
Selects value and
return to OSD main
Menu


2. How to Control OSD menu
The OSD menu appears when the user presses the OSD calling button(MENU).
The user can select the function and configure the selected function that best fits
the computer environment. If no item is selected after the OSD menu is brought
up, it automatically disappears after 15 seconds.
Moreover, the user can operate directly Brightness Menu, Contrast Menu and
Volume Menu without calling OSD Menu.
ITEM
Brightness
Contrast
H-Position
V-Position
Contents
Adjusts brightness
Adjusts contrast
Adjusts horizontal
screen position
Adjusts vertical
RIGHT
Gets brighter
Screen color becomes
more vivid
Moves screen to the
right
Moves screen to
LEFT
Gets darker
Screen color becomes
duller
Moves screen to the
left
Moves screen to
10
H-Position
OSD
V-Position
Reset
Auto Adjust
position of OSD
Adjusts vertical
position of OSD
Recovers the
default value
Sets to auto adjustment
Moves OSD to upward
RIGHT : Recovers the
default value
RIGHT : Sets to
Auto adjustment
Moves OSD to
Downward
LEFT : No change
LEFT : No change
• The OSD is in English only.
• When the cable is disconnected, the monitor will change into DPMS mode.
Then a “Power Saving Mode” message will appear.
• If you entered a mode that does not support the monitor, the message
“ Input Not Supported” will appear.
Ref.) For the best display quality, select ‘Auto Adjust’ in closing windows screen.
It automatically adjusts vertical, horizontal position and screen noise as optimum.
This ‘Auto Adjust’ does not support motion pictures and works only when the
image fully appears on the screen.
3. Reset Function
The user can use the Reset function on OSD to adjust to the default value.
At this time, color information (Brightness,R,G,B,Contrast) are changed to
factory
default value and Auto Config operates automatically after Reset for optimum
quality.
11
Phase
(*1)
OSD V-Position
50
(*1) : If you operate auto adjust, only these items will be set automatically.
( Color information will not be affected by auto adjust.)
Pivot (*option)
12
< Landscape >
< Portrait >

If you purchase pivot-enable model, you can set your monitor to portrait mode
mechanically. You can rotate the screen to 90° for your convenience with simple
procedure.
To rotate monitor, pull the front panel (up to 15° ) and turn to clock-wise direction.
When you are working with word processor, image editor, web browser for web
surfing , or etc, this pivot-enable can make your job more effective.
Power Supply and Power Management System
13
Current
: 5.0A
2. Power Management System
For the power management system of this monitor, DPMS(Display Power
Management Signaling) of VESA(Video Electronic Standard Association) is
included in the system. This reduces power consumption when the monitor is
not being used. The color or LED lamp varies according to power
consumption mode.
State
Normal Use
Save mode
LED Color
Green light
Yellow light
Power consumption(AC)
Around 44W
Around 4W
Ref.) To use the power saving function, follow the steps described below: Start >
Settings > Control Panel > Display > Screen Saver > Energy Saving Features
> Select “shut off monitor” > and adjust the time.
14
!
The screen is out of focus !
or noise occurs.
Change screen resolution
Setup DPMS mode
Check if the power supply is connected.
Adjust the OSD menu that fits the
computer.
(Use Reset, Auto, Phase keys and so on)
Check the compatibility between computer
and the monitor.
Window 98(95): Select control panel ⇒
display ⇒ Setting.
Window 98(95): Select Window Saver or
BIOS-SETUP of computer.
(Refer to Service manual)
Specifications
SPEC
Panel Type
Panel Size
Resolution
Display Size
Dot Pitch
Color
Contrast
Brightness
Compatibility
Input Signal
Connection Cable
Plug-and-Play
Power Management
System
Description
TFT
17.0”
1280 * 1024
337.92(W) * 270.33(H) mm
0.264mm * 0.264mm
16.7M colors (24bit color mode)
TYP : 350 : 1 CR
TYP : 200 cd/m²
IBM, MAC
Analog R.G.B (0.7VP-P)
D-sub 15 PIN
VESA DDC 1,2B
VESA DPMS (Display Power Management Signaling)
15
User’s Adjustment
Card
Brightness, Contrast, H/V Position, OSD H/V Position,
Color RGB, Auto Config, Reset, Clock, Phase,

16
XGA
SXG
EGA
CGA
EGA
DOS
XGA
VGA
SVGA
XGA
800 600@60Hz
800*600@72Hz
800*600@75Hz
1024*768@60Hz
1024*768@70Hz
1024*768@75Hz
1280*1024@60Hz
1280*1024@70Hz
1280*1024@72Hz
1280*1024@75Hz
640*350@70Hz
640*400@70Hz
720*350@70Hz
720*400@70Hz
1024*768@72Hz
640*480@67Hz
832*624@75Hz
1024*768@60Hz
1024*768@75Hz
37.879
48.077
46.875
48.363
56.476
60.023
63.981
74.620
76.752
79.976
31.469
31.469
31.469
31.469
57.515
35.000
49.728
48.780
60.241
60.317
72.188
75.000
60.004
70.069
75.029
60.020
70.000
72.000
75.025
70.086
70.086
70.086
70.806
72.1
66.667
74.551
60.001
74.927
IBM
MAC
17
5
10
11
12
13
14
15
GND
GND-R
GND-G
GND-B
GND
SDA
Hsync
Vsync
SCL
Ground
Ground
Ground
Ground
Ground
DDC SDA
Horizontal Sync
Vertical Sync
DDC SCL
18
( Monitor back-side )
1. Turn off the monitor power and disconnect power cable from the outlet.
2. Put a safe cloth on a flat floor and place the monitor on it.
3. Disconnect screws and pull the base Ass’y.
19
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : Microsoft Word 9.0
Modify Date                     : 2001:05:21 14:52:58-04:00
Author                          : compaq
Title                           : Introduction & Main Features
Create Date                     : 2000:05:21 09:57:22
Page Count                      : 20
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools