Comtrend 5374 Multi DSL Wireless Router User Manual UM CT 5374 A2 0
Comtrend Corporation Multi DSL Wireless Router UM CT 5374 A2 0
Comtrend >
Contents
- 1. Users Manual 1 of 3
- 2. User manual 2 of 3
- 3. User manual 3 of 3
Users Manual 1 of 3
CT-5374 Multi-DSL WLAN Router User Manual Version A2.1, April 30, 2010 261099-005 Preface This manual provides information related to the installation and operation of this device. The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts. If you find the product to be inoperable or malfunctioning, please contact technical support for immediate service by email at INT-support@comtrend.com For product update, new product release, manual revision, or software upgrades, please visit our website at http://www.comtrend.com Important Safety Instructions With reference to unpacking, installation, use, and maintenance of your electronic device, the following basic guidelines are recommended: • • • • • • Do not use or install this product near water, to avoid fire or shock hazard. For example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement). Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its path and no heavy items should be placed on the cord. In addition, do not walk on, step on, or mistreat the cord. Use only the power cord and adapter that are shipped with this device. To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are not blocked. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightening. Also, do not use the telephone to report a gas leak in the vicinity of the leak. Never install telephone wiring during stormy weather conditions. CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. WARNING Disconnect the power line from the device before servicing. Power supply specifications are clearly stated in Appendix C Specifications. Copyright Copyright©2010 Comtrend Corporation. All rights reserved. The information contained herein is proprietary to Comtrend Corporation. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of Comtrend Corporation. NOTE: This document is subject to change without notice. Protect Our Environment This symbol indicates that when the equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separate from domestic waste. The cardboard box, the plastic contained in the packaging, and the parts that make up this router can be recycled in accordance with regionally established regulations. Never dispose of this electronic equipment along with your household waste; you may be subject to penalties or sanctions under the law. Instead, please be responsible and ask for disposal instructions from your local government. FCC Compliance This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Table of Contents CHAPTER 1 INTRODUCTION .......................................................................................................... 5 1.1 FEATURES ....................................................................................................................................... 5 1.2 APPLICATION ................................................................................................................................... 6 CHAPTER 2 INSTALLATION ............................................................................................................ 7 2.1 HARDWARE SETUP .......................................................................................................................... 7 2.2 LED INDICATORS ............................................................................................................................ 9 CHAPTER 3 WEB USER INTERFACE ............................................................................................11 3.1 DEFAULT SETTINGS ........................................................................................................................11 3.2 IP CONFIGURATION ........................................................................................................................11 3.3 LOGIN PROCEDURE ....................................................................................................................... 14 CHAPTER 4 DEVICE INFORMATION .......................................................................................... 16 4.1 WAN............................................................................................................................................. 17 4.2 STATISTICS .................................................................................................................................... 17 4.2.1 LAN Statistics ................................................................................................................. 18 4.2.2 WAN Statistics ................................................................................................................ 18 4.2.3 ATM Statistics ................................................................................................................ 19 4.2.4 xDSL Statistics ............................................................................................................... 21 4.3 ROUTE .......................................................................................................................................... 27 4.4 ARP .............................................................................................................................................. 28 4.5 DHCP........................................................................................................................................... 29 CHAPTER 5 ADVANCED SETUP .................................................................................................... 30 5.1 LAYER 2 INTERFACE ...................................................................................................................... 30 5.1.1 ATM Interface ................................................................................................................ 30 5.1.2 PTM Interface ................................................................................................................ 31 5.1.3 ETH WAN INTERFACE ................................................................................................. 31 5.2 WAN............................................................................................................................................. 32 5.3 LAN ............................................................................................................................................. 33 5.4 IPV6 LAN HOST ........................................................................................................................... 35 5.5 NAT.............................................................................................................................................. 36 5.5.1 Virtual Servers................................................................................................................ 36 5.5.2 Port Triggering .............................................................................................................. 38 5.5.3 DMZ Host....................................................................................................................... 39 5.6 SECURITY...................................................................................................................................... 40 5.6.1 IP Filtering..................................................................................................................... 40 5.6.2 MAC Filtering ................................................................................................................ 42 5.7 PARENTAL CONTROL ..................................................................................................................... 44 5.7.1 Time Restriction ............................................................................................................. 44 5.7.2 URL Filter ...................................................................................................................... 45 5.8 QUALITY OF SERVICE (QOS) ......................................................................................................... 46 5.8.1 Queue Management Configuration................................................................................ 46 5.8.2 Queue Configuration...................................................................................................... 46 5.8.3 QoS Classification.......................................................................................................... 47 5.9 ROUTING ....................................................................................................................................... 49 5.9.1 Default Gateway ............................................................................................................ 50 5.9.2 Static Route .................................................................................................................... 50 5.9.3 Policy Routing................................................................................................................ 51 5.9.4 RIP ................................................................................................................................. 52 5.9.5 IPv6 Static Route............................................................................................................ 53 5.10 DNS............................................................................................................................................ 54 5.10.1 DNS Server..................................................................................................................... 54 5.10.2 Dynamic DNS................................................................................................................. 54 5.11 DSL ............................................................................................................................................ 56 5.12 UPNP.......................................................................................................................................... 58 5.13 PRINT SERVER ............................................................................................................................. 59 5.14 INTERFACE GROUPING ................................................................................................................ 59 5.15 CERTIFICATE ............................................................................................................................... 61 5.15.1 Local .............................................................................................................................. 62 5.15.2 Trusted CA ..................................................................................................................... 63 5.16 POWER MANAGEMENT................................................................................................................ 65 CHAPTER 6 WIRELESS ................................................................................................................... 66 6.1 BASIC ............................................................................................................................................ 66 6.2 SECURITY...................................................................................................................................... 68 6.2.1 WPS....................................................................................................................................... 70 6.3 MAC FILTER ................................................................................................................................. 75 6.4 WIRELESS BRIDGE ........................................................................................................................ 76 6.5 ADVANCED .................................................................................................................................... 77 6.6 STATION INFO ................................................................................................................................ 79 CHAPTER 7 DIAGNOSTICS ............................................................................................................ 81 CHAPTER 8 MANAGEMENT.......................................................................................................... 82 8.1 SETTINGS ...................................................................................................................................... 82 8.1.1 Backup Settings.............................................................................................................. 82 8.1.2 Update Settings .............................................................................................................. 82 8.1.3 Restore Default............................................................................................................... 83 8.2 SYSTEM LOG ................................................................................................................................. 84 8.3 SNMP AGENT ............................................................................................................................... 86 8.4 TR-069 CLIENT............................................................................................................................. 87 8.5 INTERNET TIME ............................................................................................................................. 88 8.6 ACCESS CONTROL ......................................................................................................................... 89 8.6.1 Passwords ...................................................................................................................... 89 8.7 UPDATE SOFTWARE ....................................................................................................................... 89 8.8 REBOOT ........................................................................................................................................ 90 APPENDIX A - FIREWALL............................................................................................................... 91 APPENDIX B - PIN ASSIGNMENTS ............................................................................................... 94 APPENDIX C - SPECIFICATIONS .................................................................................................. 95 APPENDIX D - SSH CLIENT............................................................................................................ 98 APPENDIX E - WSC EXTERNAL REGISTRAR ........................................................................... 99 APPENDIX F - PRINTER SERVER ............................................................................................... 103 APPENDIX G - CONNECTION SETUP ........................................................................................ 109 Chapter 1 Introduction The CT-5374 Multi-DSL WLAN Router provides wired and wireless access for high-bandwidth applications in the home or office. It includes four fast Ethernet ports and supports ADSL2/2+ and VDSL2 connections with DSLAM switching. ADSL2+ connections support multiple simultaneous Internet connections while VDSL2 connections are suitable for triple play (Video + Voice + Data) applications. An integrated 802.11n (draft) WLAN Access Point (AP) provides faster wireless connections with increased range, when compared with 802.11b and 802.11g, without sacrificing backwards compatibility with these older wireless standards. WPS (Wi-Fi Protected Setup) and Wi-Fi On/Off buttons are positioned on the front panel for easy wireless network setup and control. 1.1 Features Automatic ADSL2+ / VDSL2 Integrated 802.11n AP (802.11b/g backward-compatible) • • VDSL2 17a profile support • Auto PVC configuration • IP and Per-VC packet level QoS • Supports up to 16 VCs • WPA/WPA2 and 802.1x • WMM & UPnP • RADIUS client • IP/MAC filtering • Static routing & RIP/RIP v2 • Dynamic IP assignment • NAT/PAT • Parental Control • IGMP Proxy and fast leave • DHCP Server/Relay/Client • Web-based management • DNS Relay/Proxy • Supports remote administration • FTP/TFTP server • Configuration backup and restoration • TR-069/TR-098/TR-104/TR-111 • Firmware upgrade and configuration • switching based on DSLAM setting 1.2 Application The following diagrams depict typical applications of the CT-5374. Chapter 2 Installation 2.1 Hardware Setup Follow the instructions below to complete the hardware setup. BACK PANEL The figure below shows the back panel of the device. Power Button A/VDSL Port Ethernet (LAN) Ports Ethernet (LAN) Ports Power Port Reset Button Power ON Press the power button to the OFF position (OUT). Connect the power adapter to the power port. Attach the power adapter to a wall outlet or other AC source. Press the power button to the ON position (IN). If the Power LED displays as expected then the device is ready for setup (see section 2.2 LED Indicators). Caution 1: If the device fails to power up, or it malfunctions, first verify that the power cords are connected securely and then power it on again. If the problem persists, contact technical support. Caution 2: Before servicing or disassembling this equipment, disconnect all power cords and telephone lines from their outlets. Reset Button Restore the default parameters of the device by pressing the Reset button for 5 to 10 seconds. After the device has rebooted successfully, the front panel should display as expected (see section 2.2 LED Indicators for details). NOTE: If pressed down for more than 20 seconds, the CT-5374 will go into a firmware update state (CFE boot mode). The firmware can then be updated using an Internet browser pointed to the default IP address. Ethernet (LAN) Ports Use 10/100 BASE-T RJ-45 cables to connect up to four network devices. These ports are auto-sensing MDI/X; so either straight-through or crossover cable can be used. DSL Port Connect to an ADSL2/2+ or VDSL with this RJ11 Port. This device contains a micro filter which removes the analog phone signal. If you wish, you can connect a regular telephone to the same line by using a POTS splitter. FRONT PANEL The Wi-Fi & WPS buttons are located on the bottom-left of the front panel, as shown. WiFi Switch Press this button to enable/disable the wireless LAN (WLAN). WPS Button Press this button to begin searching for WPS clients. These clients must also enable WPS push button mode (see 6.2.1 WPS for instructions). 2.2 LED Indicators The front panel LED indicators are shown below and explained in the following table. This information can be used to check the status of the device and its connections. LED Color Green Mode On IP connected and no traffic detected. If an IP or PPPoE session is dropped due to an idle timeout, the light will remain green if an ADSL connection is still present. Off Modem power off, modem in bridged mode or ADSL connection not present. In addition, if an IP or PPPoE session is dropped for any reason, other than an idle timeout, the light is turned off. Blink IP connected and IP Traffic is passing thru the device (either direction) INTERNET Red Green On Device attempted to become IP connected and failed (no DHCP response, no PPPoE response, PPPoE authentication failed, no IP address from IPCP, etc.) On The device is powered up. Off The device is powered down. On POST (Power On Self Test) failure or other malfunction. A malfunction is any error of internal sequence or state that will prevent the device from connecting to the DSLAM or passing customer data. On An Ethernet Link is established. Off An Ethernet Link is not established. Blink Data transmitting or receiving over Ethernet. On The wireless module is ready. (i.e. installed and enabled). POWER Red ETH 1X-4X WIRELESS A/DSL Green Green Green Function Off The wireless module is not ready. (i.e. either not installed or disabled). Blink Data transmitting or receiving over WLAN. On xDSL Link is established. Off xDSL Link is not established. Blink fast: xDSL Link is training or data transmitting. slow: xDSL training failed. Green (for 10/100 Base-T) GbETH Amber (for 10/100/1000 Base-T) On Powered device connected to the associated port. Off No activity, modem powered off, no cable or no powered device connected to the associated port. Blink Traffic is passing. On Powered device connected to the associated port. Off No activity, modem powered off, no cable or no powered device connected to the associated port. Blink Traffic is passing. 10 Chapter 3 Web User Interface This section describes how to access the device via the web user interface (WUI) using an Internet browser such as Internet Explorer (version 5.0 and later). 3.1 Default Settings The factory default settings of this device are summarized below. • • • • • LAN IP address: 192.168.1.1 LAN subnet mask: 255.255.255.0 Administrative access (username: root , password: 12345) User access (username: user, password: user) Remote (WAN) access (username: support, password: support) • WLAN access: enabled Technical Note During power on, the device initializes all settings to default values. It will then read the configuration profile from the permanent storage section of flash memory. The default attributes are overwritten when identical attributes with different values are configured. The configuration profile in permanent storage can be created via the web user interface or telnet user interface, or other management protocols. The factory default configuration can be restored either by pushing the reset button for more than five seconds until the power indicates LED blinking or by clicking the Restore Default Configuration option in the Restore Settings screen. 3.2 IP Configuration DHCP MODE When the CT-5374 powers up, the onboard DHCP server will switch on. Basically, the DHCP server issues and reserves IP addresses for LAN devices, such as your PC. To obtain an IP address from the DCHP server, follow the steps provided below. NOTE: The following procedure assumes you are running Windows XP. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. STEP 1: From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button. STEP 3: Select Obtain an IP address automatically as shown below. 11 STEP 4: Click OK to submit these settings. If you experience difficulty with DHCP mode, you can try static IP mode instead. 12 STATIC IP MODE In static IP mode, you assign IP settings to your PC manually. Follow these steps to configure your PC IP address to use subnet 192.168.1.x. NOTE: The following procedure assumes you are running Windows XP. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. STEP 1: From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button. STEP 3: Change the IP address to the 192.168.1.x (1
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print Modify Date : 2010:04:30 19:09:49+08:00 Create Date : 2010:04:30 19:06:53+08:00 Title : Microsoft Word - UM_CT-5374_A2.0.doc Author : Cheryl.Kao Creator : Pscript.dll Version 5.0 Producer : AFPL Ghostscript 8.50 Page Count : 50 Mod Date : 2010:04:30 19:09:49+08:00 Creation Date : 2010:04:30 19:06:53+08:00 Metadata Date : 2010:04:30 19:09:49+08:00EXIF Metadata provided by EXIF.tools