Concox Information Technology AT4 Asset GPS Tracker with 2.4G wifi and GSM. User Manual AT4 2018 0918

Shenzhen Concox Information Technology Co., Ltd Asset GPS Tracker with 2.4G wifi and GSM. AT4 2018 0918

User Manual

Asset GPS TrackerUser Guide(Version 1.3)To ensure quickly and correctly use, please read this manual carefully before using. Any changes to the product appearance, color or accessories are without notice.1.Overview1.1 Main Functions·GPS + LBS + WIFI positioning·Intelligent power saving·IPX5 waterproof grade·Tamper alert·Strong magnet installation·Fast charging·10000mAh battery·Listen-in 1.2 SpecificationsFrequencyLocation accuracyMonitoring rangeWorking voltage/ currentBatteryWorking hourLEDOperating temperatureDimensionWeightGSM 850/900/1800/1900MHz<10 meters≤5 meters3.7V/ 60mA10000mAh/3.7V industrial grade lithium polymer battery30 days (drive for 2 hours a day)Red: work status-20℃— +70℃108(L) x 61(W) x 30(H) mm285g2.Appearance2.1 AppearanceNotchMICGSM status indicatorSIM card Cover remove detection switchAnti-tamper buttonBattery indicatorPower2.2 Standard AccessoriesDeviceBracketUser guideChargerCharge cable111112.3 GSM IndicatorStatusFlicker quickly ( every 0.3seconds)Flicker slowly ( 0.1s on; 2s off)Always ONMeaningGSM initialization/ No GSM signal/No SIM cardLogin platformCallingGSM indicator is off after the device power on for 3 minutes. If device power on, shortly press the power button to activate LED, which will be off in 60 seconds.3. SIM cardSIM card should have access to GPRS and SMS.Remove the cover, switch to OFF and insert the SIM card.NotchBattery switch is on OFFpositionSIM card:Insert SIM card 4. InstallationWith strong magnet, the device has easy installation and can absorb on any magnetic item. Attached 3M foam tape and bracket help fix the device on non-magnetic items.3M sticker Stand5. OperationPower on: Press power button for 3 seconds ( battery switch is in ON position)Power off: Press power button for 3 seconds5.1 Power ON/OFFSet SOS number via APP, GPS tracking platform or SMS (SMS only valid in tracking mode)1.SMS command to add SOS number: SOS,A, number 1, number 2, number 3#E.g. SOS,A,1351234xxxx, 1371234xxxx,1301234xxxx#2.SMS command to delete SOS number:SOS,D,number sequence 1, number sequence 2, number sequence 3#E.g. SOS,D,1,2,3#3.Query current SOS number:SOS#5.2 SOS Number(1)Tracking mode (default): GSM is always ON and location data uploaded in set time interval. Time interval can be set on APP or designated platform. 5.3 Working Mode“2” means ultra-standby mode.“T1” means the start time of sleeping period. Format:HH:MM.“T2” means the sleep time interval, range 1-72(hours). Default: 24 hours.Note: SMS command takes effect after device wakes up.E.g.MODE,2,12:00,8# (Meaning: Device starts to fall asleep at 12:00, and wakes up every 8 hours)The anti-tamper button will pop out and alert will be sent if the device is disassembled. In standby mode, alert message will be uploaded and tracking mode will be activated for 20 minutes if device dis-assembly is detected. After 20 minutes, device enters into ultra-long standby mode. Dis-assembly alert can be turned off by command: cancel#5.4 Tamper AlertCover detection button pops out and alert will be sent when device cover is dismantled. In standby mode, alert message will be uploaded and tracking mode will be activated for 20 minutes if cover dismantlement is detected. After 20 minutes, device enters into ultra-long standby mode. Dis-assembly alert can be turned off by command: cancel#5.5 Cover Remove AlertWhen battery is low, the device will activate low battery alarm.5.6 Low Battery Alert6.2 Download APPPlease download and install the APP in designated website, APP store or Google Play store.7. WarningBattery specified by manufacturer is recommended. Maintenance or service arising from any other accessories is not guaranteed. Manufacturer assumes no responsibility for any damage caused by non-original accessories.Do not bend or open the battery.Do not immerse or burn the battery.Device dis-assembly is strongly forbidden. Nonprofessionals’ operation may cause device damage.TroubleshootingIf you are having trouble with your device, try these troubleshooting procedures before contacting a service professional.Unable to bootPower switch is off Switch to ONNo batteryNo SIM cardchargeInsert SIM cardUnable to connect to the networkSIM card inserted incorrectlyCheck SIM cardDirty things exist above the SIM cardClean SIM cardInvalid SIM card Contact network supplierNot in GSM service areaMove to service areaPoor signal Move to area with strong signalFail to locate SIM has no access to GPRS Contact network supplier to get GPRS serviceAlways reply “Address inquiry failed”Contact supplierWarranty instructions and service .4. Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty period. 5. The warranty is not applicable to cases other than defects in material, design and workmanship.Maintenance RecordDate Serviced byProduct ModelIMEI NumberFault DescriptionsCommentsPush and loosen the button will trigger tamper alertNotice: In this mode, all command will NOT be executed until the device wakes up at preset time interval. If you want to compel the device to wake up and receive command, you can a. By trigger the tamper alert button at the back; b. By unplug the battery and plug it in again.SMS command format:MODE,2,T1,T2#SMS command format:MODE,1,T1,T2#1 means tracking modeT1: upload interval of GPS data in moving status,unit: second, 10-3600s; default: 10sT2:upload interval of GPS data in static status unit: second, 180-86400s; default: 3600s(2) Ultra-long standby mode: device wakes up and uploads location data in a fixed time. USBBattery switch5.7 Vibration alarmThe vibration alarm only works in mode 1 (tracking mode). To activate this function, please send 111 first to the SOS number and the device will be in arming status. To turn on the vibration alarm, please send command SENALM, ON#SMS command for device disarming: 0005.8 Geo-fence alarm5.9 Voice monitoringThe geo-fence alarm only works in mode 1 (tracking mode). When the vehicle enter/exit the preset geo-fence area, the device will send alarm to the SOS numbers when the geo-fence function is ON.Use preset SOS number to send command MONITOR# to the device. Device would automatically call you back in a second. Pick up and monitor the voice inside the vehicle. BOOTALM,OFF#Turn off the power on alarm.5.10 Power on alarmAlarm will be sent when the device starts. SMS command:BOOTALM,A,M#A=ON/OFF；default：ONM=0～3；alarming way，0 : GPRS，1 : SMS+GPRS；M=2 GPRS+SMS+ calling; M=3 GPRS+calling; default：0；5.11 Power off alarmAlarm will be sent when the device power off. SMS command:PWROFFALM,X,M#X=ON/OFF；default：ONM=0～1；alarming way，0 : GPRS，1 : SMS+GPRS； default：0；5.12 Power off restrictionWhen power off restriction command is sent by SOS numbers, the device can’t power off by pressing the power button.PWRLIMIT,X#X=ON/OFF；ON：means allow to power off，OFF：means power off forbidden;PWRLIMIT#Check ON/OFF status.2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself.3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service centre. Problems Causes SolutionsThe signal waves are unable to transmit when use the GPS tracker in the places that have poor signal reception, such as: tall building around or basement.Using the GPS tracker in the places that have good signal condition.Poor signal1.The warranty is valid only when the warranty card is properlycompleted, and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase, model and serial No.of the product. We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer。6. Platform & APP6.1 Login service platformPlease login the designated service platform to set and operate the device.FCC ID:X7IAT4Product can't talk, can't transmit data over usb.
FCCcautionThisdevicewastestedfortypicalbody‐wornoperationswiththebackofthehandsetkept10mmfromthebody.TomaintaincompliancewithFCCRFexposurerequirements,useaccessoriesthatmaintaina10mmseparationdistancebetweentheuser'sbodyandthebackofthehandset.Theuseofbeltclips,holstersandsimilaraccessoriesshouldnotcontainmetalliccomponentsinitsassembly.TheuseofaccessoriesthatdonotsatisfytheserequirementsmaynotcomplywithFCCRFexposurerequirements,andshouldbeavoided.FCCstatements:This device complies with part 15 of the FCC rules. Operation issubjectto thefollowingtwoconditions:(1)thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.NOTE: The manufacturer is not responsible for any radio or TV interferencecaused by unauthorized modifications or changes to this equipment. Suchmodifications or changes could void the user’s authority to operate theequipment.NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass B digital device, pursuanttopart15oftheFCCRules.These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and canradiateradiofrequency energy and, if not installed and used in accordance with theinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.If this equipment does cause harmful interference to radio or televisionreception,whichcanbedetermined by turning the equipment offandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor more of thefollowingmeasures:‐Reorientorrelocatethereceivingantenna.‐Increasetheseparationbetweentheequipmentandreceiver.‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.RFExposureInformation(SAR)The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue.Device types AVR1‐WT Android device (FCCID:X7IAT4) hasalso been testedagainst thisSAR limit.The highest SAR value reported under this standard during product.certificationfor use when properly worn on the body is 0.313W/kg.1

Navigation menu