Concox Information Technology AT4 Asset GPS Tracker with 2.4G wifi and GSM. User Manual AT4 2018 0918

Download:
Mirror Download [FCC.gov]
Document ID	4180773
Application ID	SAwh4GsoT7lzG8fIZtMQeQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.25kB (1040642 bits)
Date Submitted	2019-02-26 00:00:00
Date Available	2019-02-26 00:00:00
Creation Date	2018-09-18 17:58:11
Producing Software	Adobe PDF library 10.01
Document Lastmod	2019-02-21 17:23:40
Document Title	AT4 2018-0918
Document Creator	Adobe Illustrator CS6 (Macintosh)
Document Author:	zhanglijuan

1.Overview
1.1 Main Functions
Battery switch
·GPS + LBS + WIFI positioning
·Intelligent power saving
·IPX5 waterproof grade
·Tamper alert
·Strong magnet installation
·Fast charging
·10000mAh battery
·Listen-in
Working hour
LED
Operating temperature
Dimension
Weight
2.1 Appearance
Status
Flicker quickly ( every 0.3
seconds)
Flicker slowly ( 0.1s on;
2s off)
Always ON
Meaning
GSM initialization/ No GSM signal/
No SIM card
Login platform
5.1 Power ON/OFF
Calling
5.2 SOS Number
GSM indicator is off after the device power on for 3 minutes.
If device power on, shortly press the power button to activate
LED, which will be off in 60 seconds.
3. SIM card
GSM 850/900/1800/1900MHz
<10 meters
≤5 meters
3.7V/ 60mA
10000mAh/3.7V industrial grade
lithium polymer battery
30 days (drive for 2 hours a day)
Red: work status
-20℃— +70℃
108(L) x 61(W) x 30(H) mm
285g
2.Appearance
Cover remove
detection switch
SIM card
1.2 Specifications
Frequency
Location accuracy
Monitoring range
Working voltage/ current
Battery
5. Operation
2.3 GSM Indicator
MIC
GSM
status indicator
Notch
SIM card should have access to GPRS and SMS.
Remove the cover, switch to OFF and insert the SIM card.
Anti-tamper
button
Battery switch is on OFF
position
Push and loosen
the button will
trigger tamper alert
Notch
Battery indicator
Power
USB
2.2 Standard Accessories
Device
Bracket
User guide
Charger
Charge cable
The vibration alarm only works in mode 1 (tracking mode). To
activate this function, please send 111 first to the SOS number and
the device will be in arming status. To turn on the vibration alarm,
please send command SENALM, ON#
SMS command for device disarming: 000
5.8 Geo-fence alarm
The geo-fence alarm only works in mode 1 (tracking mode). When
the vehicle enter/exit the preset geo-fence area, the device will
send alarm to the SOS numbers when the geo-fence function is
ON.
5.9 Voice monitoring
Use preset SOS number to send command MONITOR# to the
device. Device would automatically call you back in a second. Pick
up and monitor the voice inside the vehicle.
5.10 Power on alarm
Alarm will be sent when the device starts. SMS command:
BOOTALM,A,M#
A=ON/OFF；default：ON
M=0～3；alarming way，0 : GPRS，1 : SMS+GPRS；M=2
GPRS+SMS+ calling; M=3 GPRS+calling; default：0；
BOOTALM,OFF#
Turn off the power on alarm.
5.11 Power off alarm
Alarm will be sent when the device power off. SMS command:
PWROFFALM,X,M#
X=ON/OFF；default：ON
M=0～1；alarming way，0 : GPRS，1 : SMS+GPRS； default：
0；
5.12 Power off restriction
When power off restriction command is sent by SOS numbers,
the device can’t power off by pressing the power button.
PWRLIMIT,X#
X=ON/OFF；ON：means allow to power off，OFF：means
power off forbidden;
4. Installation
With strong magnet, the device has easy installation and can
absorb on any magnetic item. Attached 3M foam tape and
bracket help fix the device on non-magnetic items.
Problems
Poor signal
PWRLIMIT#
Check ON/OFF status.
6. Platform & APP
6.1 Login service platform
Please login the designated service platform to set and operate
the device.
6.2 Download APP
Unable to
boot
Unable to
connect to
the network
Please download and install the APP in designated website,
APP store or Google Play store.
7. Warning
Battery specified by manufacturer is recommended.
Maintenance or service arising from any other accessories
is not guaranteed.
Manufacturer assumes no responsibility for any damage caused
by non-original accessories.
Do not bend or open the battery.
Do not immerse or burn the battery.
Device dis-assembly is strongly forbidden.
Nonprofessionals’ operation may cause device damage.
Troubleshooting
If you are having trouble with your device, try these
troubleshooting procedures before contacting a service
professional.
Power on: Press power button for 3 seconds ( battery switch is in
ON position)
Power off: Press power button for 3 seconds
Set SOS number via APP, GPS tracking platform or SMS (SMS
only valid in tracking mode)
1.SMS command to add SOS number:
SOS,A, number 1, number 2, number 3#
E.g. SOS,A,1351234xxxx, 1371234xxxx,1301234xxxx#
2.SMS command to delete SOS number:
SOS,D,number sequence 1, number sequence 2, number
sequence 3#
E.g. SOS,D,1,2,3#
3.Query current SOS number:SOS#
5.3 Working Mode
(1)Tracking mode (default): GSM is always ON and location data
uploaded in set time interval. Time interval can be set on APP or
designated platform.
3M sticker
5.7 Vibration alarm
SIM card:Insert SIM
card
compel the device to wake up and receive command, you can a.
By trigger the tamper alert button at the back; b. By unplug the
battery and plug it in again.
Stand
Causes
The signal waves are
unable to transmit
when use the GPS
tracker in the places
that have poor signal
reception, such as: tall
building around or
basement.
Solutions
Using the GPS tracker
in the places that have
good signal condition.
Power switch is off
No battery
No SIM card
SIM card inserted
incorrectly
Dirty things exist
above the SIM card
Invalid SIM card
Switch to ON
charge
Insert SIM card
Check SIM card
Not in GSM service
area
Poor signal
Fail to locate
Clean SIM card
Contact network
supplier
Move to service area
Move to area with
strong signal
SIM has no access to Contact network
GPRS
supplier to get GPRS
service
Always reply “Address Contact supplier
inquiry failed”
SMS command format:
MODE,1,T1,T2#
1 means tracking mode
T1: upload interval of GPS data in moving status,
unit: second, 10-3600s; default: 10s
T2:upload interval of GPS data in static status
unit: second, 180-86400s; default: 3600s
(2) Ultra-long standby mode: device wakes up and uploads
location data in a fixed time.
Notice: In this mode, all command will NOT be executed until
the device wakes up at preset time interval. If you want to
2. Our obligations are limited to repair of the defect or replacement
the defective part or at its discretion replacement of the product
itself.
3. Warranty repairs must be carried out by our
Authorized Service
Centre. Warranty cover will be void, even if a repair has been
attempted by any unauthorized service centre.
4. Repair or replacement under the terms of this warranty does
not provide right to extension or renewal of the warranty period.
5. The warranty is not applicable to cases other than defects in
material, design and workmanship.
5.4 Tamper Alert
The anti-tamper button will pop out and alert will be sent if the
device is disassembled.
In standby mode, alert message will be uploaded and tracking
mode will be activated for 20 minutes if device dis-assembly is
detected. After 20 minutes, device enters into ultra-long standby
mode. Dis-assembly alert can be turned off by command: cancel#
5.5 Cover Remove Alert
Cover detection button pops out and alert will be sent when
device cover is dismantled.
In standby mode, alert message will be uploaded and tracking
mode will be activated for 20 minutes if cover dismantlement is
detected. After 20 minutes, device enters into ultra-long standby
mode. Dis-assembly alert can be turned off by command: cancel#
5.6 Low Battery Alert
When battery is low, the device will activate low battery alarm.
FCC ID:X7IAT4
Product can't talk, can't transmit
data over usb.
Asset GPS Tracker
User Guide
(Version 1.3)
Maintenance Record
Date
SMS command format:
MODE,2,T1,T2#
“2” means ultra-standby mode.
“T1” means the start time of sleeping period. Format:
HH:MM.
“T2” means the sleep time interval, range 1-72(hours).
Default: 24 hours.
Note: SMS command takes effect after device wakes up.
E.g.MODE,2,12:00,8# (Meaning: Device starts to fall asleep at
12:00, and wakes up every 8 hours)
Serviced by
Product Model
IMEI Number
Fault
Descriptions
Warranty instructions and service
1.The warranty is valid only when the warranty card is properly
completed, and upon presentation of the proof of purchase
consisting of original invoice indicating the date of purchase,
model and serial No.of the product. We reserve the right to refuse
warranty if this information has been removed or changed after
the original purchase of the product from the dealer。 .
Comments
To ensure quickly and correctly use, please read
this manual carefully before using. Any changes
to the product appearance, color or accessories
are without notice.
FCC caution
This device was tested for typical body‐worn operations with the back of the
handset kept 10mm from the body.
To maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 10mm separation distance between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications or changes to this equipment. Such
modifications or changes could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information(SAR)
The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue.
Device types AVR1‐WT Android device (FCC ID:X7IAT4) hasalso been tested
against this
SAR limit.The highest SAR value reported under this standard during product.
certification for use when properly worn on the body is 0.313W/kg.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2018:09:18 17:58:11+08:00
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Modify Date                     : 2019:02:21 17:23:40+08:00
Metadata Date                   : 2019:02:21 17:23:40+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 164
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22077 bytes, use -b option to extract)
Producer                        : Adobe PDF library 10.01
Format                          : application/pdf
Creator                         : zhanglijuan
Title                           : AT4 2018-0918
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 35.000000
Max Page Size H                 : 22.000001
Max Page Size Unit              : Centimeters
Font Name                       : SimSun, AdobeSongStd-Light, ArialMT, Arial-BoldMT
Font Family                     : 宋体, Adobe 宋体 Std, Arial, Arial
Font Face                       : Regular, L, Regular, Bold
Font Type                       : TrueType, Open Type, Open Type, Open Type
Font Version                    : Version 5.03, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.06, Version 5.06
Font Composite                  : False, False, False, False
Font File Name                  : simsun.ttc, AdobeSongStd-Light.otf, arial.ttf, arialbd.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Document ID                     : xmp.did:0580117407206811822A83AF3F1E6E41
Instance ID                     : uuid:0460159e-b42f-446a-901a-41fd46a30aae
Original Document ID            : xmp.did:F97F11740720681183D1B21BFA7311EA
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0480117407206811822A83AF3F1E6E41
Derived From Document ID        : xmp.did:0480117407206811822A83AF3F1E6E41
Derived From Original Document ID: xmp.did:F97F11740720681183D1B21BFA7311EA
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:F97F11740720681183D1B21BFA7311EA, xmp.iid:0580117407206811822A83AF3F1E6E41
History When                    : 2018:05:25 14:36:53+08:00, 2018:09:18 17:58:03+08:00
History Software Agent          : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
Page Count                      : 2
AI Creator Version              : 16.0.0
For                             : ���,
Bounding Box                    : -1 -1 993 624
AI Build Number                 : 682
AI Color Usage                  : Color
AI Ruler Units                  : Centimeters
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Container Version               : 9
Creator Version                 : 16
Author                          : zhanglijuan

EXIF Metadata provided by EXIF.tools