Concox Information Technology CTGT06E GPS VEHICLE TRACKER User Manual

Shenzhen Concox Information Technology Co., Ltd GPS VEHICLE TRACKER

User manual

3G GPS Vehicle tracker (GPS+WCDMA+SMS) User Manual (Version 1.0) This user manual has been specially designed to guide you through the functions and features of your GPS vehicle tracker.
1. Start Guide 1.1 Accessories:  Device  Power cord  Relay (Optional)  Microphone  SOS alarm cable & button  User Manual 1.2 Main Functions  Real-time tracking  Vibration/Displacement/Low battery/Power off alert  SOS  ACC detection  Geo-fence  Mileage  Air update  AGPS locating  Remotely control electricity/oil  Analogue input  Output control  Digital input 1.3 Specifications Frequency WCDMA 850/900/1900/2100MHz GSM 850/900/1800/1900MHz Networks WCDMA /GPRS Operating Voltage 9-36VDC<300mA Location Time Cold Start: ＜35s Hot Start：＜2s Location Accuracy <10 meters Operating Temperature -20℃ — +70℃ Dimension 98.5(L) x 52(W) x 15(H) mm Weight 80g
2 My device 2.1 Appearance 2.2 LED indicators GPS LED Indicator - Blue Flashing (interval 0.1s) Searching GPS signal Solid blue GPS positioned OFF GPS sleep or off GSM LED Indicator - Green Quick flashing (interval 0.1s) GSM initializing Slow flashing (flash 0.1s every 2s) Receive GSM signal normally Solid green Connected to GPRS network OFF No GSM signal or SIM card
Power Status - Red Flashing (interval 0.1s) Low battery Slow flashing (interval 2s) Full charge Slow flashing (flash 0.1s off 2s) Normal operating Solid Red Charging OFF Low battery/Power off Note: Defense Status The device is in defense status if blue, red and green indicator flashed in a loop. 3. Installation 3.1 Install the SIM card Notice： SIM should be inserted correctly. SIM card should have GPRS service.
3.2 Device Line Definition Picture 1
Table 1 Line Color Definition Description 1 Red PW+ 12V/24V positive side of battery 2 Black GND 12V/24V negative side of battery 3 Orange ACC ACC ignition 4 Yellow RELAY Relay 5 Red 5V-OUT External power supply 6 Blue RX Data receiving / backup interface 7 Green TX Data sending/ backup interface 8 Black GND Negative electrode 9 Purple ADC Extended Interface 10 Orange IN1 11 Yellow OUT1 12 Black GND SOS button 13 Orange SOS+ 14 Brown MIC+ Microphone 15 Black MIC- Relay wiring instruction Relay wiring way of oil pump open circuit: On each end of the wire is thin white line (85) and thin yellow line (86). Thin white line (85) connects to the positive side of battery (12V) while thin yellow line (86) connects to the device relay control. There is an oil pump in the vehicl. Cut off the positive line. The positive side of oil pump connects to the close-end of relay.(Thick green line 87a), and
the other side connects to relay’s common（green thick 30）. Notice: 12V relay is standard. The device is suiitable for vehicles with 12V battery. If the vehicle has 24V battery, then 24V relay needed. 3.3 Device Wiring Way
1) The standard power supply ranges from 9V to 36VDC. Please use the powe cord manufactured by the original factory. Red line means positive side while black line means negative side. During installation, negative side should connect to the ground. 2) ACC line (orange) connects to vehicle’s ACC, detecting ignition and
flamout. 3) Device’s oil and electricity control line (yellow) connects to relay’s 86. (thin yellow line of relay socket) 3.4 Device Installation Note: The device should face up to the sky Metal thermal barrier or heating layer of the windshield affects the signal. Please change installation places to receive better signal. 4. Operation of device Power on/ Power off Power on: Once insert a valid SIM card and connect all the wires, turn on the device, then Power LED will flash first, During signal searching process, GSM and GPS LED will flash. Once GPS LED keeps solid light, it means the device has been located and it starts to work. Power off: Just turn off the power switch. Notice: When device is charged by external power, please turn on the battery. The battery will connect with the device circuits and its built-in battery will be charged. If battery is OFF, battery can’t be charged. The device will power off if no external power supply.
5. Main Functions 5.1 SOS In emergent case, press SOS for 3s to activate SOS alarm. Then the device will send SOS SMS to preset SOS numbers and then dial the numbers in 3 circles until the call is picked up. Alarm message will also send to platform. 5.2 Power cut-off alarm When the electricity supply of device is cut off, it will activate cut-off alarm. 5.3 Low battery alarm When battery is low, the device will activate low battery alarm. 5.4 Displacement alarm Device will send movement alarm when vehicle moves out the pre-set distance (when ACC is off and GPS is fixed). 5.5 Vibration alarm (Default ON) When vehicle vibrates several times, the vibration alarm will be triggered. If no ignition after 3 minutes (ACC OFF), the device will send vibration alarm message immediately. 5.6 Voice monitoring Use pre-set SOS number to dial the device. If no answering after 10 seconds, device changes to monitoring mode automatically. The caller, on the other hand, can hear the noise inside the vehicle. Device won’t monitor when non-SOS number call in. Notice: 1. Pre-set SOS number is necessary 2. SIM card must have caller ID sevice 3. No external horn/speaker 5.7 Oil/Electricity cut-off When vehicle is stolen, oil/electricity cut-off command can be sent by platform, APP or SMS. Notice:
1. Make sure ACC is correctly connected. 2. When ACC is OFF, command will be executed immediately. 3. When ACC is ON, but GPS is not fixed, command will be postponed. 4. When ACC is ON, GPS is fixed, command will be executed when vehicle speed is less than 20km/h. 5.8 Restore oil/electricity When alarm is cancelled, user can send restore oil/electricity command by platform, APP or SMS and restore vehicle power. 5.9 Restart device If GPRS is abnormal (device is offline), user can send SMS command（RESET#） to restart the device. Device will reboot after 20 seconds after receive the command. 6．Platform Operation Get registered on the designated service platform by authorized dealer, then you can start the tracking service and settings. 6.1 Login service platform Please login the designated sevice platform to set and operate the device. 6.2 Download APP Please download and install the APP in designated website, APP store or Google Play store. 7．Command List 1 Check device status STATUS# 2 Get device GPS latitude/longitude WHERE#
3 Check device location in Google Map link URL# 4 SOS number setting 1, Add SOS number: SOS,A,number 1,number 2,number 3# Example: SOS,A,12342***,134533***,135432***# 2, Delete subjected sequence of SOS number: SOS,D,number sequence 1,number sequence 2, number sequence 3# Example: SOS,D,1,2# 3, Delete the SOS number: SOS,D,phone number# 4, Query SOS number: SOS# 5 GPS data upload time interval TIMER,T1,T2# T1=5～18000 seconds；ACC ON upload interval；default value：10 T2=5～18000 seconds；ACC OFF upload interval；default value：20 (when GPS is on) Example: TIMER,20,20# 6 GPS data upload distance interval DISTANCE,D# D=0、50～10000 meter；Distance interval；default value：300, unit：meter； 7 Delayed defense setting DEFENSE,A# A:1～60 minutes，set delayed defense，default value：10 minutes 8 Vibration alarm 1, SENALM,ON# 2, SENALM,OFF# 9 Movement alarm (Default OFF) 1, MOVING,ON,R,# R=100～1000; Movement radius, unit: meter Example: MOVING,ON,200,# 2, MOVING,OFF# 10 Power/oil control RELAY,A# A=0/1； 0: power on，1: cut off power；default value：0 Example: RELAY,1# 11 Restart RESET# Device restart 20 seconds after receiving this command 8．Trouble shooting
If you are having trouble with your device, try these troubleshooting procedures before contacting a service professional. Problems Causes Solutions Poor signal The signal waves unable to transmit when use the GPS tracker in the places that have poor signal reception, such as: tall building around or basement. Using the GPS tracker in the places that have good signal condition. Unable to boot Low battery Charge the device battery Unable to connect to the network Poor signal Using the GPS tracker in the places that have good signal condition. Unable to locate Signal shielded or Poor signal Change the installation place No power off alarm Built-in battery is off Turn it on Fail to start the car Power cutoff /ACC abnormal Restore power/Check ACC Car stops driving Abnormal power supply Connect the device negative electrode to constant power Offline/Indicators off Abnormal power supply/Indicators sleep Check power supply/Press side key to activate indicators No update of vehicle’s location No GPS positioning Test the device again/Change installation place Power on, all light indicators are on for 3 minutes Overdue / Damaged SIM card Make a payment/Change SIM card
1. The warranty is valid only when the warranty card is properly completed, and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase, model and serial No.of the product. We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product from the dealer. 2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself. 3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service centre. 4. Repair or replacement under the terms of this warranty does not provide right to extension or renewal of the warranty period. 5. The warranty is not applicable to cases other than defects in material, design and workmanship. Maintenance Record ShenZhen Concox Information Technology CO.,Ltd Tel: +86 755 2912 1200 Fax: +86 755 2912 1290 E-mail: jason@concox.cn. Add: 4/F, Building B, Gaoxinqi Industrial Park, Liuxian 1st Road, No.67 Bao'an District, Shenzhen www.iconcox.com Date Serviced by Product Model IMEI Number Fault Descriptions Comments Warranty instructions and service
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Warning:To comply with FCC RF exposure requirements, a minimum separation distance of 20cm between user and transmitterinclude its antenna must be maintained during normal operations.

Navigation menu