Concox Information Technology GT800 Vehicle GPS Tracker User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3439424
Application ID	WiCpAA03mwIh2fMYWkqEBw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.13kB (964105 bits)
Date Submitted	2017-06-26 00:00:00
Date Available	2017-06-26 00:00:00
Creation Date	2016-08-15 09:27:25
Producing Software	Corel PDF Engine Version 14.0.0.653
Document Lastmod	0000-00-00 00:00:00
Document Title	图形2
Document Creator	CorelDRAW
Document Author:	zhanglijuan

GPS Vehicle tracker
User Manual
(Version 1.0)
This user manual has been specially designed to guide
you through the functions and features of your GPS
vehicle tracker.
1.Start Guide
1.1 Accessories
◆ Main device
◆ Power cord
◆ 4-pin relay
◆ 5-pin relay*2
◆ Microphone
◆ SOS cable
◆ Extension cable
◆ Speaker
1.2 Main Functions
◆ Real-time GPS+AGPS tracking
◆ IP66 dust and waterproof
◆ 50000 pieces of data storage
◆ Track by time interval or distance
◆ Remotely fuel/power cut-off control
◆ Voice monitor
◆ SOS alarm
◆ Geo-fence alarm
◆ Vibration alarm
◆ Movement alarm
◆ External power supply cut-off alarm
◆ Two way communication
◆ Door status-detection
◆ Multiple analog & digital input/output
◆ Find the car by triggering light and buzzer
1.3 Specifications
Frequency
GPRS
Operating Voltage
Location Time
Storage
Battery
Location Accuracy
Operating Temperature
Dimension
Weight
GSM 850/900/1800/1900MHz
Class 12, TCP/IP
9-36VDC / <300mA
Cold Start: ＜35s
Hot Start：＜2s
64MB
800mAh
<10 meters
-20℃ ~ +70℃
83（L）×76（W）×18（H）mm
95g
2.My Device
2.1 Appearance
Power
Oil/electricity
ACC
Data
Extension
interface
SOS button
MIC
Speaker
GSM LED indicator
GPS LED indicator
Power status
3. Wire Connection
3.1 Wire Definition
Line Color
Red
Black
Orange
Yellow
Red
Blue
Green
Black
Purple
10 Orange
11
Yellow
12
Black
13 Orange
14
Brown
15
Black
16
Grey
17
Black
Description
PW+
GND
ACC
RELAY
5V-OUT
RX
TX
GND
ADC
In1
OUT1
GND
SOS+
MIC+
MICSPK+
SPK-
Definition
12V/24V car battery positive
12V/24V car battery negative
ACC ignition
Relay
External power supply
Data receiving / backup interface
Data sending/ backup interface
GND(negative)
Analog input
Digital input
Output, Relay
SOS button
Microphone
Speaker
3.2 Wiring diagram
Analog signal
Diagram 1
Power
Oil/electricity
ACC
Storage
battery
Negative trigger
connection car type
Door negative
trigger connection
Relay
Data
Door switch
Ignition key
Door light
Oil pump
Positive trigger
connection
car type
Extension
interface
Door positive
trigger connection
Door switch
Door light
Outout control
Connection
Connection
Diagram 2
MIC
Car horn relay
Car left signal wire
Relay 1
Speaker
Left turn light
Car
horn
button
Relay 1
Car left signal wire
Left turn light
Car right signal wire
Microphone
Car right signal wire
Right turn light
Right turn light
SOS
Notice: Purple line (ADC) of terminal connects to analog signals line,
like voltage of external device, analog temperature sensor, fuel sensor.
Voltage detected by analog signal ranges from 0~30Vdc.
Relay 2
Connect to turn light
Diagram 3
Relay 2
Connect to car horn
and turn light
Wiring Instruction
1.The standard power supply ranges from 9V to 36VDC. Please use
the power cord manufactured by the original factory. Red line means
positive side while black line means negative side. During
installation, negative side should connect to the ground, do not
connect with other ground wires at the same time.
2.ACC line (orange) connects to vehicle's ACC switch, detecting
ignition on and off.
3.Device's oil and electricity control line (yellow) connects to relay's 86.
(thin yellow line of relay socket)
Relay wiring instruction
Relay wiring way of oil pump open circuit: On each end of the wire is thin
white line (85) and thin yellow line (86). Thin white line (85) connects to
the positive side of battery (12V) while thin yellow line (86) connects to the
device relay control. There is an oil pump in the vehicle. Cut off the
positive line. The positive side of oil pump connects to the close-end of
relay.(Thick green line 87a), and the other side connects to relay's
common(green thick 30).
Notice
12V relay is standard. The device is suitable for vehicles with 12V
battery. If the vehicle has 24V battery, then 24V relay is needed.
4.To monitor analog signals, the purple line (ADC) of extended port
should be connected to the analog line.
5.To check status of car door, orange line (IN1) should be connected
to where between the door light and door switch (See the diagram).
6.To find car remotely, please connect the yellow line (OUT1) of
extended port to external relay.
Wiring instruction for remote trigger car light and buzzer
Thin white line (85) and thick green line (87) of relay should be connected
to car battery's positive pole. The thin yellow line (86) is connected to the
yellow line (OUT1) of extended port. Cut off the line of car turn light first
and then connect one side with turn light to the common terminal (thick
green line 30) and other side to closed terminal (thick green line 87a). See
diagram for wiring way.
3.3 Device Installation
Under rear windshield
Device
Under front windshield
Device
Device
Around dashboard
Note：
The device should face up to the sky.
Metal thermal barrier or heating layer of the windshield affects the
signal. Please change installation places to receive better signal.
4. Operation of device
Power on/ Power off
Power on: Once you insert a valid SIM card and connect all the
wires, turn on the device. Power LED will flash first. During signal
searching process, GSM LED and GPS(blue) LED will flash. Once
Blue GPS LED keeps steadily ON, it means the device has been
located and it starts to work.
Power off: Just toggle off the power switch.
Notice:
When device is connected with external power, please turn on the
battery switch. The battery will then connect with the device circuits
and its built-in battery will be charged. If battery is OFF, battery can't
be charged. The device will be power off if no external power supply.
5. Main Functions
5.1 SOS
In emergent case, press SOS for 3 seconds to activate SOS alarm.
Then the device will send SOS SMS to preset SOS numbers and
then dial the numbers in a loop for 3 times until the call is picked up.
Alarm message will also send to platform. (See command list 7-9)
5.2 Power cut-off alarm
When the electricity supply of device is cut off, it will activate cut-off
alarm.
5.3 Low batter y alarm
When battery is low, the device will activate low battery alarm.
Device will send alert through SMS and to the platform.
5.4 Vibration alarm (default OFF)
When vehicle vibrates for several times, the vibration alarm will be
triggered. If ignition keeps OFF for 3 minutes (ACC OFF), the device
will send vibration alarm message immediately.(See command list 713)
5.5 Voice monitoring
1. When MIC and speaker are connected, use pre-set SOS number to
send command JT# to the device. Device would automatically call
you back in a second. Pick up and monitor the voice inside the
vehicle.
2. When MIC is connected while speaker is not, use pre-set SOS
number to dial the device, after 10 seconds, device enters into
monitoring mode automatically. The caller can hear the voice inside
the vehicle.
Notice
1.Pre-set SOS number is necessary.
Non-SOS number cannot activate this function.
2.SIM card of device must have caller ID sevice.
5.6 Two-way communication
To activate this function, ensure that both MIC and speaker are
connected well.
Use pre-set SOS number to dial the device, after 10 seconds, device
enters into two-way talk mode.
5.7 Displacement alarm(default OFF)
Device will send movement alarm when vehicle moves out the preset distance (when ACC is off and GPS is fixed).
5.8 Oil/Electricity cut-off
When vehicle is stolen, oil/electricity cut-off command can be sent
by platform, APP or SMS.
Notice
1.Make sure ACC is correctly connected.
2.When ACC is OFF, command will be executed immediately.
3.When ACC is ON, but GPS is not fixed, command will be postponed.
4.When ACC is ON, GPS is fixed, command will be executed when
vehicle speed is less than 20km/h.
If you want to cut off/restore oil by SMS command, you have to set a
center number firstly. Only the center number can send the cut
off/restore oil command to the device. (See command list 7-15)
Notice
1.Only the SOS number can be used to set center number.
2.Only the SOS number can be used to delete center number.
3.There is only one center number can be set.
5.9 Restore oil/electricity
When alarm is all-clear, you can send restore oil/electricity
command by platform, APP or SMS and restore vehicle power.
(See command list 7-16)
5.10 Restart device
If GPRS is abnormal (device is offline), user can send SMS
command RESET# to restart the device. Device will reboot after 20
seconds after receiving the command. (See command list 7-17)
5.11 Door detection
The device is able to detect door status. It uploads car status to
platform and APP timely. Negative triggering is default. When car
door's status is negative triggering, there is no need to set. Instead,
if car door status is positive triggering, the triggering way has to be
modified. (Command: DOOR,1# ). See 3.3 diagram-2 for wiring way.
( See command list 7-18)
Notice
Negative triggering (default): when door is open, signal level of door
is 0V; when door is closed, signal level of door is power voltage.
Positive triggering: when door is open, signal level of door is power
voltage; when door is closed, signal level of door is 0V.
5.12 Analog signal
The device can measure car battery's voltage and upload it to
platform/APP in fixed time based on your needs. Purple line (ADC)
of device extended port can receive analog signal, like voltage of
external device, analog temperature sensor and fuel sensor. Voltage
range of analog input is 0~30Vdc. See 3.3 diagram for wiring way.
(See command list 7-19)
5.13 Find the car by triggering
light and buzzer
When need to pick out the car parking on giant parking lot, you can
send a command. After the device receives the command, it will
control turn light relay or horn relay by the yellow line of extended
port, so as to trigger the car's light or horn. In this way, you can figure
out your car's position easily and accurately. See 3.3 diagram-3 for
wiring way. (See command list 7-20)
6.Platform Operation
Get registered on the designated service platform by authorized
dealer, then you can start the tracking service and settings.
6.1 APN & Ser ver setting
To ensure normal network operation, please confirm your APN and
server setting before login.
In most countries, APN could be automatically adapted to local
mobile operators. If not, please send SMS to set the APN.
If username and password is required for APN, please add it into the
command. (See command list 7-7)
Confirm the server address and setting with distributors. If server is
incorrect, please send SMS to change. (See command list 7-8)
6.2 Login ser vice platform
Please login the designated sevice platform to set and operate the
device.
6.3 Download APP
Please download and install the APP in designated website, APP
store or Google Play store.
7.Common Command List
Edit SMS command in the right column to the device SIM number to
achieve respective function as below:
Device status
Device coordinate
Location URL
Check version
Network setting
Check parameter
7 APN setting
8 Server setting
9 SOS setting
10
GPS data upload
time interval
STATUS#
WHERE#
URL#
VERSION#
GPRSSET#
PARAM#
1. APN, [apnname]#
E.g: APN,internet#
2. APN, [apnname],[user],[pwd]#
E.g: APN,internet,CLIENTE,AMENA#
SERVER,mode,domain/IP,port,0#
E.g. SERVER,1,www.ydpat.com,8011,0#
SERVER,0,211.154.135.113,8011,0#
mode1 means set with domain name
mode 0 means set with ip address
1. Add SOS number:
SOS,A,number 1,number 2,number 3#
2.Delete subjected sequence of SOS
number:
SOS,D,number sequence 1,
number sequence 2, number sequence 3#
E.g. SOS,D,1,2,3#
3. Delete the SOS number：
SOS,D,phone number#
4. Query SOS number：SOS#
TIMER,T1,T2#
T1=5～18000 seconds；ACC ON upload
interval；default value：10
T2=5～18000 seconds；ACC OFF upload
interval；default value：10(when GPS is
not sleep)
11
12
13
14
15
DISTANCE,D#
D=0、50～10000 meter；
Distance interval；default value：300,
unit：meter；
DEFENSE,A#
Delayed defense
A:1～60 minutes，set delayed defense，
setting
default value：10 minutes
Vibration alarm
1. SENALM,ON#
(default OFF)
2. SENALM,OFF#
1. MOVING,ON,R,M#
R=100～1000; Displacement radius，
Displacement alarm
unit: meter
setting
M=0-2;
Alert way
(default OFF)
0:GPRS，1:SMS+GPRS；
2: GPRS+SMS+CALL
E.g. MOVING,ON,200,2#
2. MOVING,OFF#
Set center number :
CENTER,A,mobile number#
Set center number
Delete center number: CENTER,D#
GPS data upload
distance interval
16 Power/oil control
17 Restart
Car door negative/
18 positive triggering
setting
Analog upload
19 setting
Find car by
20 triggering light
and buzzer
RELAY,A#
A=0/1
0= restore petrol; 1=cut off petrol
Default value：0
E.g. RELAY,1#
RESET#
Device restart 20 seconds after receiving
this command
DOOR,A#
A=0/1; 0 negative triggering，
1 positive triggering；
default: 0
Upload analog data: ADT,ON,T#
T: upload interval; scope: 5∼3600(second)
Turn off analog upload: ADT,OFF#；
default: OFF
FIND#
8.Trouble shooting
If you are having trouble with your device, try these troubleshooting
procedures before contacting a service professional.
Problems
Poor signal
Causes
The signal waves
unable to transmit
when use the GPS
tracker in the places
that have poor signal
reception, such as:
tall building around
or basement.
Solutions
Using the GPS tracker in the
places that have good signal
condition.
Unable to
boot
Low battery
Charge the device battery
Unable to
connect to
the network
Poor signal
Using the GPS tracker in the
places that have good signal
condition.
Unable to
locate
Signal shielded
or Poor signal
Change the installation place
No power
off alarm
Built-in battery is off
Turn it on
Fail to start
the car
Power cutoff /
ACC abnormal
Restore power/Check ACC
Car stops
driving
Abnormal power
supply
Connect the device negative
electrode to constant power
Abnormal power
Offline/
supply/Indicators
Indicators off sleep
Check power supply/Press
side key to activate indicators
No update
of vehicle's
location
Test the device again/
Change installation place
No GPS positioning
Warranty instructions and ser vice
1. The warranty is valid only when the warranty card is properly
completed, and upon presentation of the proof of purchase
consisting of original invoice indicating the date of purchase, model
and serial No.of the product. We reserve the right to refuse warranty
if this information has been removed or changed after the original
purchase of the product from the dealer.
2. Our obligations are limited to repair of the defect or replacement
the defective part or at its discretion replacement of the product
itself.
3. Warranty repairs must be carried out by our Authorized Service
Centre. Warranty cover will be void, even if a repair has been
attempted by any unauthorized service centre.
4. Repair or replacement under the terms of this warranty does not
provide right to extension or renewal of the warranty period.
5. The warranty is not applicable to cases other than defects in
material, design and workmanship.
Maintenance Record
Date
Product Model
IMEI Number
Fault
Descriptions
Comments
Serviced by
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : zhanglijuan
Title                           : 图形2
Creation Date--Text             : 
Mod Date--Text                  : 
Producer                        : Corel PDF Engine Version 14.0.0.653
Trapped                         : False
Creator Tool                    : CorelDRAW
Modify Date                     : 2017:06:23 16:41:47+08:00
Metadata Date                   : 2017:06:23 16:41:47+08:00
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Document ID                     : uuid:61c3149b-d41c-4826-93b1-561062304a3b
Instance ID                     : uuid:211f710b-c253-49b2-9ba2-16fdd9900959
Page Count                      : 16
Author                          : zhanglijuan
Create Date                     : D:20160815092725Z

EXIF Metadata provided by EXIF.tools