Connect Tech Blue Heat Net Sync Ctim 00044 Users Manual

2015-02-05

• Limited Lifetime Warranty
• Copyright Notice
• Trademark Acknowledgment
• Customer Support Overview
• Contact Information
• Certification Statements
• Table of Contents
• List of Figures
• List of Tables
• Introduction
  • Features
  • Understanding Virtual COM Ports
• Blue Heat/Net Sync Installation Overview
• Hardware Installation
  • Connecting the Blue Heat/Net Sync to Your Network:
    • Ethernet LEDs
    • Serial Port LEDs
  • Connecting Serial Devices
    • V.28 Connections:
      • Basic Async (V.28) RS-232 Null Modem Connection
      • Basic Sync (V.28) RS-232 Connection (Provides Clock)
      • Basic Sync (V.28) RS-232 Connection (Receives Clock)
    • RS-422/V.11 Connections
  • Blue Heat/Net Synchronous Clocking
  • Loopback Connectors
  • Connecting Power
    • DC Power Connector
    • Phoenix Locking Screw Terminal Connector
  • Activating the Special Operations Mode and Default Settings
    • Using the Reset Button to Activate the Special Operations Mode
    • Selecting a Special Operation
  • Power On Diagnostics:
    • LED Error Codes
  • SCM Cabling requirements
    • SCM: Serial Configuration Manager
  • Setting a Static or Dynamic IP Address
    • Set the IP Address Using the Web Configuration Manager
    • Set the IP Address Using the Serial Configuration Manager
• Blue Heat/Net Sync Configuration
  • CDS (Configuration Data Space)
    • Description
    • Access to CDS Parameters
  • SCM (Serial Configuration Manager)
    • Description
    • Getting Access to the SCM
    • SCM Command Reference
      • Brief Command List
      • Command Details
        • boot
        • cfg
        • exit
        • help
        • info
        • net
        • save
        • update
  • WCM (Web Configuration Manager)
    • Signing In to the Web Configuration Manager
      • Configure Advanced Serial Settings
      • Configure Blue Heat/Net Sync Settings
      • Configure Firmware
      • Restore Defaults
      • Saving To Flash
    • Monitoring Your Blue Heat/Net
      • Monitor Serial Port Traffic
      • Monitor Network Traffic
      • Monitor TCP/IP Statistics
      • My Blue Heat/Net Sync
• Software Installation for Windows
  • Installing the Blue Heat/Net Sync Configuration Manager
  • Running the Configuration Manager
  • Device Installation
    • Configure Default Blue Heat/Net Sync
    • Add New Blue Heat/Net Sync
    • Auto Discover Blue Heat/Net Sync
• Firmware Upgrades
  • Upgrade using WCM (Web Configuration Manager)
  • Upgrade using SCM (Serial Configuration Manager)
• Software Development
  • Memory Map of IUSC and PLD Functions
    • ColdFire (5272) Bus:
    • IUSC Access:
    • PLD Resource Access:
  • PLD Memory Map Table
  • Port Settings, Clock Setup and General Settings
  • IUSC Clocking Logic:
• Appendix
  • Blue Heat/Net Sync Specifications
    • Operating Environment
    • Communications
    • ESD Protection
    • Power
    • Connectors
    • Dimensions
    • Cable and Power Supply Options
    • Protocol Descriptions
  • Pinouts
    • DB-25 Female Pinouts
    • DB-9 Female Pinouts
    • Multi-drop Communications Using V.11 / RS422/RS485 Line Modes
  • Rack Mount Option:
  • Default Settings
    • Network Settings
    • Boot Settings
    • SCM Operation Settings
  • Common Configuration Setups
    • Static IP Setup
      • Using SCM
      • Using WCM
    • DHCP Setup
      • Using SCM
  • How the Blue Heat/Net Sync Boots Up
    • Bootup Sequence
    • Flowchart of Special Operations Mode using the reset button
    • Asynchronous Communications Tutorial
  • Serial Line Interface Tutorial
    • RS-232 Line Interface:
    • Differential Line Interfaces:
    • RS485/RS422/V.11 Details
      • Basic 4-Wire, Full Duplex Communications:
      • Multi-drop 4-Wire, Full Duplex Communications:
      • Basic - Wire, Half Duplex Multi-drop Connection:
    • Bus Contention on Differential Multi-drop Networks:
    • Termination Resistors in Differential Networks
      • Termination Resistors in Differential Networks: