Connected ARROWG01 GPS TRACKER User Manual Reset switch
Connected Holdings LLC GPS TRACKER Reset switch
User Manual
Confidential Preliminary – Subject to Change Product Description For the Arrow Vehicle Tracking Device By Connected Holdings LLC Jan 1, 2015 The information presented in this document is strictly confidential and contains trade secrets and other confidential information that are the exclusive property of Connected Holdings LLC, its parent, subsidiaries or agents. Document reference Revision: X1.00 Author: Mr. Edmund Lee Proofed by: Mr. Zeev Collin Release date: Date first printed above File name: ARROW_Overview_Specification_X100_030112 Authorized Recipients Executive management as provided to and are bound by a Non-Disclosure Agreement (NDA) in favor of Connected Holdings LLC, its parent or its agent and preventing disclosure or misuse of the confidential information herein. 2015 Connected Holdings LLC Page 1 of 11 Confidential Preliminary – Subject to Change Description The ARROW GPS Tracker is a self contained, integrated commercial grade vehicle tracking device that uses GPS satellite location in combination with a quad band GSM/GPRS cellular radio connection to report that location. All antennas including the GPS patch and GSM antenna are internal to the device. Data reporting can be initiated by a server or by the tracker itself via GSM/GPRS SMS or UDP pathways or over a physical USB connection. The ARROW is comprised of a simple two piece plastic enclosure that is snapped together for reliability, durability and low cost assembly. Interface signals and power are ported through a connector socket at one end with 8pin wire connector. The ARROW is based on chip level design as opposed to the traditional approach of using a third party communications module with an external processor. The application software executes on the base level Central Processing Unit (CPU) under direct real-time Operating System (OS) control. This approach provides a much more reliable, lower power and faster response time than module/processor architectures. Unlike common module/processor based designs; the ARROW design allows direct operating system access by the application, thus mitigating the need and for a redundant external processor and the associated power and cost. For added redundancy against system lockup, a physically separate, dedicated watchdog circuit oversees the ARROW system operation. If the system does not maintain the watchdog circuit through programmed reporting, the system power is cycled and a new GPS satellite and cellular connection is established. The ARROW can be provisioned for UDP and SMS data services for application command and/or data transactions within the 850, 900, 1800 and 1900 MHz GSM bands. Network provisioning is done using embedded SIM technology for reliability and cost savings. For added safeguard against network connection loss, a hardware ARROW endpoint reset and reboot can be initiated by simply calling the provisioned phone number and allowing it to ring three times. Flexible I/O includes 2 bidirectional General Purpose Input Output (GPIO) ports. A separate dedicated USB port is provided for general use as well as development and programming support. A high current relay drive is provided for starter motor solenoid control or general purpose drive (current sink only). Over The Air (OTA) application firmware updates are supported through at TFTP connection to a server. The entire application image can be updated using one specialized SMS or USB command. All inputs are electrically hardened against overvoltage and over current conditions present in automotive environments. This includes transient electrical noise and Electrostatic Discharge (ESD). The power input is further protected against over current with an internal self-resetting fuse. The ARROW is physically disguised to appear to be a nondescript part of the cabling system. It is a small black box with unremarkable features. Two LED status indicators are provided to verify correct installation and initial operation. A unique power 2015 Connected Holdings LLC Page 2 of 11 Confidential Preliminary – Subject to Change management feature allows these LEDs to be extinguished once installation is verified to be correct. This feature reduces power and further conceals the ION Tracker from untrained parties wishing to defeat its operation. As with all GPS location devices, the ARROW should be installed in a vehicle such that it has an unobstructed view of the sky during normal operation. Double sided foam tape can be used to secure the surface not facing the sky if needed. A factory populate option is provided to add a backup battery and motion detector to the main board. Under software control, this motion detector can be used to wake the ARROW from a very low power state. 2015 Connected Holdings LLC Page 3 of 11 Preliminary – Subject to Change Confidential Bullet Specifications ________________________________________________________________________ Cellular: 850/900/1800/1900 MHz Quad band GSM/GPRS Protocol CS-1, CS-2, CS-3 and CS-4 Output power: Class 4 (2W) @ 850/900MHz > 24dB @ 850/900MHz (OTA TRP) Class 1 (1W) @ 1800/1900MHz > 26.5dB @ 1800/1900MHz (OTA TRP) Sensitivity: < -107dBm @ 850/900MHz (Conducted) < -101dBm @ 850/900MHz (OTA TIS) < -106dBm @ 1800/1900MHz (Conducted) < -103.5dBm @ 1800/1900MHz (OTA TIS) Antenna: Integrated onto PCB Meets minimum AT&T TRP/TIS requirements ________________________________________________________________________ Services: GPRS Multi slot class 12 SMS (Text): UDP data DNS address resolution GSM circuit switched hard reboot ________________________________________________________________________ 2015 Connected Holdings LLC Page 4 of 11 Preliminary – Subject to Change Confidential ________________________________________________________________________ GPS: L1-band (1.57542GHz) Channels: 210 PRN 66 Search 22 Simultaneous tracking Sensitivity (UHIS): Tracking: -165dBm Reacquisition: -158dBm Acquisition: -149dBm Acquisition time: Hot: <1.5s Warm: <34s Cold: <90s Reacquisition: <1.0s WAAS: Position: <3m Velocity: >0.1m/s Acceleration: >0.1m/s2 Altitude: 18,000m (max) Velocity: 515m/s (max) Acceleration: 4G (max) 32 Geo fences Coil antenna ________________________________________________________________________ 2015 Connected Holdings LLC Page 5 of 11 Preliminary – Subject to Change Confidential ________________________________________________________________________ I/O: One main port and one internal expansion port All pins are 16V tolerant and ESD protected Pigtail: 2-Leads 2.8V GPIO 2-Leads USB2.0 Data+ Data1-Pin relay drive -500mA drive TVS overvoltage protection 1-Pin power input: 1.0A resetting fuse TVS overvoltage protection 1-Pin ground SIM: Internal embedded LED: Red GSM status Green GPS status Battery voltage measurement ________________________________________________________________________ Power: Vin: 6.0 – 15.0VDC Full Shutdown: < 50µA Standby: < 800µA (GSM Idle) GPS acquisition: < 40.0mA (GSM Idle) GPS tracking: < 36 mA (GSM Idle) GSM dedicated: < 36.0mA (GPS Off) GPRS max power: < 90.0mA (GPS Off) Peak instantaneous < 600mA 2015 Connected Holdings LLC Page 6 of 11 Confidential Preliminary – Subject to Change _______________________________________________________________________ Software: Native ARM processor execution Proprietary application Extended AT command interface Easily configured reports to minimize data transport costs Based on proven GSM/GPRS modem stack Lockup protection: Independent watchdog with power cycle reset and reboot GSM circuit switched reset Flash memory: 8MB for application and data storage Report buffer USB port update Over the air update ________________________________________________________________________ Options: Backup Battery Motion sensor ________________________________________________________________________ Physical: Design: Nondescript design Color: Black Material: UL Lanxess PA6 Durethan BKV15+ Size: L91mm x W39.4mm x D13.7mm SIM: Keyed retainer socket ________________________________________________________________________ Environment: Temperature: -40 to 85°C Operation -50 to +100°C Storage Humidity: 20% to 90% Operation 10% to 95% Storage ESD: 15KV immune on all user accessible surfaces and ports Altitude: -500 to +18,000m Shock: 25G Vibration: Sinusoidal/random ________________________________________________________________________ 2015 Connected Holdings LLC Page 7 of 11 Preliminary – Subject to Change Confidential Hardware Architecture Figure 1 shows a high level block diagram of the ARROW system hardware. The core architecture is defined a highly integrated GPRS chipset and single chip GPS receiver. The motion detector is optionally populated at assembly time. Signal and power interface to the PCB is through a 8pin connector harness. Figure 1 ION-X Hardware Architecture Block Diagram PCB Antenna Main PCB GPRS Chipset RF Interface Cellular Base Band ARM Patch Antenna DSP Timing Green LED Driver UART GPS Single Chip Receiver LED Driver Memory Interface Flash/SRAM Memory USB2.0 IC Motion Detection GPIO SIM Interface Embedded SIM GPIO Reset/Power A/D GPIO Red Signal Conditioning Strain Relief 8pin Connector Relay Driver DC/DC Converter 2015 Connected Holdings LLC Combiner Power Conditioning Watchdog Controller Page 8 of 11 Confidential Preliminary – Subject to Change Physical Attributes Figures 2 show various exterior views and dimensions of the ARROW Tracker and some critical physical features. Figures 2 2015 Connected Holdings LLC Page 9 of 11 Preliminary – Subject to Change Confidential Variants Model Arrow-G Arrow-G-BA Arrow-G-BG Description GPRS GPS Tracker – Standard GPRS GPS Tracker with Built-in Backup Battery GPRS GPS Tracker with Built-in Backup Battery & Motion Sensor Remarks FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. IC Statement This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2015 Connected Holdings LLC Page 10 of 11 Confidential Preliminary – Subject to Change CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B) IC RF Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Déclaration de rayonnement RF exposée IC: Ce dispositif conforme aux valeurs limites d'exposition pour les rayonnements RF présente un environnement non contrôlé.Le dispositif dissipateur de chaleur et le corps entre l'installation et la distance minimale de 20 cm de fonctionner. 2015 Connected Holdings LLC Page 11 of 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Warning : Invalid secondary xref table Page Count : 11 Language : zh-CN Tagged PDF : Yes Title : Reset switch Author : Staff Creator : Microsoft® Word 2010 Create Date : 2015:04:13 14:45:46+08:00 Modify Date : 2015:04:13 14:45:46+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools