Continental Advanced Antenna RKE213E1 Transceiver Module User Manual
KATHREIN Automotive GmbH & Co. KG Transceiver Module
User manual
Functional description of testsetup
Project BR213 , FCC ID:2ACC7RKE213E1
Functional Description
of
testsetup (RKE213E1)
Taiwan
A. Stuffer / CEE
30.06.2015
Functional description of testsetup
Project BR213
1 6FRSHRIGHOLYHU\
A. Stuffer / CEE
RKE-Screenantenna
RKE213 Testbox with data-cable
RKE-Key
RKE_Sample_Application-Mode
RKE_Sample_CW-mode_CH1 (433,47 MHz)
RKE_Sample_CW-mode_CH2 (434,37 MHz)
RKE_Sample_CW-mode_CH3 (433,92 MHz)
30.06.2015
Functional description of testsetup
Project BR213
2 $VVHPEO\LQVWUXFWLRQ±6FUHHQDQWHQQD
Screenantenna as-delivered
Assemble the pedestal (screws are implemented on the antenna-frame)
A. Stuffer / CEE
30.06.2015
Functional description of testsetup
Project BR213
3 $VVHPEO\LQVWUXFWLRQ-7HVWVHWXS
Plug the RKE-sample (CW- or Application-sample) to the antenna-interface
Tighten the mounting-screw
A. Stuffer / CEE
30.06.2015
Functional description of testsetup
Project BR213
Plug the data-cable in the antenna-interface
Connect the data-cable with the RKE-Testbox (DATA I/O)
Supply the RKE-Testbox with +12 Volt
(+12V | GND | Current consumption < 100 mA)
A. Stuffer / CEE
30.06.2015
Functional description of testsetup
Project BR213
4 7HVWLQJ&:-PRGH
Take care: Works only with CW-sample on Testsetup!
3UHVVÄ5(6(7³EHIRUHHYHU\PHDVXUHPHQW
CW-mode: no LED is burning
A. Stuffer / CEE
30.06.2015
Functional description of testsetup
Project BR213
5 7HVWLQJSROOLQJ-PRGH 5HFHLYLQJ-PRGH
Take care: Works only with Application-sample on Testsetup!
3UHVVÄ5(6(7³EHIRUHHYHU\PHDVXUHPHQW
polling-mode: the green STATE LED is burning
Press any button at the RKE-Key
/('Ä5(&(,9('$7$29(55)³EXUQV-> RKE-Reception is OK
A. Stuffer / CEE
30.06.2015
Functional description of testsetup
Project BR213
6 7HVWLQJ7UDQVPLWWLQJ-PRGH
Take care: Works only with Application-sample on Testsetup!
3UHVVÄ5(6(7³EHIRUHHYHU\PHDVXUHPHQW
3UHVVWKHÄ7;³-button
3UHVVWKHÄCH SEL³-button until your desired CH is aktive
In this case: Tx-mode with CH 1 (433,47 MHz)
Tx-mode with CH 2 (434,37 MHz)
A. Stuffer / CEE
Tx-mode with CH 3 (433,92 MHz)
30.06.2015
Product information radio frequency transmitter
Taiwan NCC Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase
the power, or change the characteristics and functions of the original design of the
certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the
navigation safety nor interfere a legal communication, if an interference is found, the
service will be suspended until improvement is made and the interference no longer
exists.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2015:09:01 15:38:40+08:00 Modify Date : 2016:01:20 13:33:27+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 6.0.1 (Windows) Metadata Date : 2016:01:20 13:33:27+08:00 Document ID : uuid:2c74fd11-c012-4c94-8049-eba75bbc711d Instance ID : uuid:5c888828-5dcd-467c-8832-3465ee1b40f6 Format : application/pdf Title : untitled Page Count : 10EXIF Metadata provided by EXIF.tools