Control4 WR1X22 802.11ac Dual Band Wireless Router User Manual WR 1 Quick Start Guide

Control4 Corporation 802.11ac Dual Band Wireless Router WR 1 Quick Start Guide

Contents

Users Manual.pdf

WR-1802.11ac Wireless Router with BakPakQUICK START GUIDEBakPak Enabled
22IntroductionThe Pakedge WR-1 Wireless Router gives you the convenience of a high-throughput wired router integrated with an 802.11ac Wave 2 wireless access point. The router hasadvanced features like port forwarding and static routes, while also supporting UPnP for simple compatibility with common consumer devices. The WR-1 also integrates the BakPak Management sub-agent, which means that you can access the power of BakPak to monitor your WR-1 from anywhere in the world.Key features:• BakPak built in: Manage the WR-1 from the standard BakPak interface.• 500+ Mbps WAN-to-LAN firewall throughput• Secure VPN: Support for PPTP and OpenVPN• BakPakDDNS: Free Dynamic DNS service built in• 802.11ac Wave 2 2×2 wireless• Simple-to-use web GUI
33Access Point’sPackage contents• (1) WR-1 Router• (1) Power adapter• (1) Quick Start Guide• (1) Ethernet cableUser guide• For more detailed instructions for this device and for the BakPak Management Sub-agent, refer to the WR-1 User Guide (pkdge.co/wr1-ug).Specifications• System requirements: Windows or Mac PC with an Ethernet interface.
44Overview4 3 21WANUSB 12V/1.5ARESET1 2 3 4A B CH I JGFD EFront panelBack panelA PowerB InternetC LAN port activityD 2.4 GHz activeE 5 GHz activeF RESET buttonG USB portH LAN portsI WAN (to modem/Internet) portJ Power connector
55InstallingTools required:• Computer with Ethernet interface and a web browser• Ethernet cableTo install the unit:1 Open the box and remove the WR-1.2 Ensure that the unit is physically mounted away from obstructions that could interfere with the wireless signal, such as metal racks or other wireless transmitting electronic devices.3 Connect an Ethernet cable from your ISP modem to the WAN port on the WR-1.4 Connect power to the WR-1.You are now ready to configure the unit to allow Internet access and register with BakPak.
66Logging in1 After power is connected and a computer is connected to the LAN port, enter the WR-1’s IP address into the address bar of your web browser. A login screen opens. Default settings: The IP address will be automatically set to 192.168.1.99.2 Type your user name and password, then click Login. (The default username is pakedge and the password is pakedger.)The Dashboard appears. The WR-1 Dashboard lets you navigate to all of the router’s configuration sections.3 To configure your network’s basic settings, go to Quick Setup. 4 To register the WR-1 with BakPak, click the BakPak icon in the top menu bar.
77Registering your WR-1 with BakPakYou can connect your WR-1 to your existing BakPak account or create a new account to manage all of your BakPak Management Agents.To register your WR-1 to your BakPak account:1 In the Dashboard, click BakPak. The BakPak Registration page opens. 2 Follow the on-screen instructions to complete your device registration.
Technical SupportFor technical help: www.pakedge.com/portalsupport@pakedge.com(650) 385-8703For non-technical inquires:customerservice@pakedge.com(650) 385-8701For regulatory information:www.pakedge.com/regulatoryDOC-00273-A 2017-05-11 MS11734 Election Road, Draper, UT 84020Main: (650) 385-8700 Fax: (650) 685-5520 www.pakedge.comsales@pakedge.com©2017 Pakedge Device & Software Inc. All rights reserved.

Navigation menu