Controlled Entry Distributors 318LIPW1K Models 318LIPW1K, 318DOPW1K User Manual IS TM13DCCUK
Controlled Entry Distributors, Inc. Models 318LIPW1K, 318DOPW1K IS TM13DCCUK
Exhibit 8
MONARCH 318LIPW1K ua an The Transmitter Solutions - 318R receiver which operates with this transmitter has a Wiegand 26 bit output and can operate any type of access control system equipped with the same protocol. The CR 2016 lithium batteries of the transmitter have a shelf life of about 6 months. The product fully complies with Part 15 of FCC Regulations and the European Directives 99/5/CE, 89/336/CEE, 73/23/CEE. 1B - Technical specifications Transmitter Solutions Thank you for choosing a Transmitter Solutions product . Please read this manual carefully before using the product. Made in Italy. Copyright © 2006 by Transmitter Solutions CONTENTS 1 - TRANSMITTER OVERVIEW 1A - General information 1B - Technical specifications 1C - Main components 2 - NUMBERING 3 - PROGRAMMING 4 - OPERATION Operating frequency 318 MHz Number of keys: Battery : 2 x 3V lithium batteries CR2016 Battery life: 18 ÷ 24 months Number combinations : 65,536 Protocol : Linear compatible Different Facilities codes 16 Operating temperature: -20°F÷+131°F (-20°C÷+55°C) Overall dimensions: 2.4”x1.4”x0.51” (61x36x13 mm) Weight: 0.49 oz. (14 gr.) 1C - Main components Red LED 5 - BATTERY ACCESS Blue push-button 6 - TROUBLESHOOTING 1A - General information The Transmitter Solutions - Monarch 318LIPW1K transmitter is a key chain style mini transmitter operating at 318 MHz. It has been designed for use with programmable telephone entry, security, and access control systems operating with a 318 MHz frequency receiver. The code sent by the transmitter includes a 16 bit security code which allows up to 65,536 code combinations and 4 bits of facility code which allows up to 16 facility codes . Dark grey case Fig. 2 Key ring holder 6 - TROUBLESHOOTING 2 - NUMBERING Each transmitter is manufactured and sold with a different factory-set serial number . 3 - PROGRAMMING The transmitter must be programmed into your system memory. Your own installer or reseller will provide you the necessary instructions for your system. PROBLEM SOLUTION The system does not receiver the transmitter signal. The transmitter LED will not light Replace the transmitter batteries The system does not receiver the transmitter signal. The transmitter LED is ON Check to verify the transmitter is programmed into your system The operating range is reduced Replace the transmitter batteries 4 - OPERATION A - Firmly depress the button until the small red LED illuminates. B - After the LED has illuminated, release the button. If the device you are attempting to activate does not respond, repeat steps A and B or consult section 6 ( Troubleshooting ) of this manual. Transmitter Solutions - Type : 318LIPW1K FCC ID : SU7318LIPW1K 5 - BATTERY ACCESS To access the battery open the case with a screwdriver acting on the slot between the cover and the bottom and remove the bottom, as shown in fig. 3a and 3b. Slide out the old batteries and replace them with the new ones [CR2016] respecting the polarity, with the positive (+) side upward. NOTE: Please dispose of the batteries properly according to local laws and regulations. Test proper battery installation by verifying that the red LED illuminates when the button is pushed. Fig. 3a This device complies with Part. 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. Notice Any changes or modification to Transmitter Solutions equipment not expressly approved by Transmitter Solutions could void the manufacturer’s warranty. WARRANTY The warranty period of Transmitter Solutions 318 transmitters is 24 months, beginning from the manufacturing date of the transmitter. During this period, if the product does operate correctly, due to a defective component, the product will be repaired or replaced at the sole discretion of Transmitter Solutions. The warranty does not extend to the transmitter case which can be damaged by conditions outside the control of Transmitter Solutions or to battery life. Fig. 3b TRANSMITTER SOLUTIONS 2505 Chandler Avenue, Suite, 1 Las Vegas, NV 89120 (866)975-0101 - (866) 975-0404 Fax sales@transmittersolutions.com IS-TM13LCCUK Rev. 1 del 22.03.2006 MONARCH 318DOPW1K ua an The Transmitter Solutions - 318R receiver which operates with this transmitter has a Wiegand 26 bit output and can operate any type of access control system equipped with the same protocol. The CR 2016 lithium batteries of the transmitter have a shelf life of about 6 months. The product fully complies with Part 15 of FCC Regulations and the European Directives 99/5/CE, 89/336/CEE, 73/23/CEE. 1B - Technical specifications Transmitter Solutions Thank you for choosing a Transmitter Solutions product . Please read this manual carefully before using the product. Made in Italy. Copyright © 2006 by Transmitter Solutions CONTENTS 1 - TRANSMITTER OVERVIEW 1A - General information 1B - Technical specifications 1C - Main components 2 - NUMBERING 3 - PROGRAMMING 4 - OPERATION Operating frequency 318 MHz Number of keys: Battery : 2 x 3V lithium batteries CR2016 Battery life: 18 ÷ 24 months Number combinations : 16,384 Protocol : MicroCLIK® compatible Different Facilities codes 64 Operating temperature: -20°F÷+131°F (-20°C÷+55°C) Overall dimensions: 2.4”x1.4”x0.51” (61x36x13 mm) Weight: 0.49 oz. (14 gr.) 1C - Main components Red LED 5 - BATTERY ACCESS Red push-button 6 - TROUBLESHOOTING 1A - General information The Transmitter Solutions - Monarch 318DOPW1K transmitter is a key chain style mini transmitter operating at 318 MHz. It has been designed for use with programmable telephone entry, security, and access control systems operating with a 318 MHz frequency receiver. The protocol is MicroCLIK® compatible and the code sent by the transmitter includes a 14 bit security code which allows up to 16384 code combinations and 6 bits of facility code, which allows up to 64 facility codes . Dark grey case Fig. 2 Key ring holder 6 - TROUBLESHOOTING 2 - NUMBERING Each transmitter is manufactured and sold with a different factory-set serial number . 3 - PROGRAMMING The transmitter must be programmed into your system memory. Your own installer or reseller will provide you the necessary instructions for your system. PROBLEM SOLUTION The system does not receiver the transmitter signal. The transmitter LED will not light Replace the transmitter batteries The system does not receiver the transmitter signal. The transmitter LED is ON Check to verify the transmitter is programmed into your system The operating range is reduced Replace the transmitter batteries 4 - OPERATION A - Firmly depress the button until the small red LED illuminates. B - After the LED has illuminated, release the button. If the device you are attempting to activate does not respond, repeat steps A and B or consult section 6 ( Troubleshooting ) of this manual. Transmitter Solutions - Type : 318DOPW1K FCC ID : SU7318LIPW1K 5 - BATTERY ACCESS To access the battery open the case with a screwdriver acting on the slot between the cover and the bottom and remove the bottom, as shown in fig. 3a and 3b. Slide out the old batteries and replace them with the new ones [CR2016] respecting the polarity, with the positive (+) side upward. NOTE: Please dispose of the batteries properly according to local laws and regulations. Test proper battery installation by verifying that the red LED illuminates when the button is pushed. Fig. 3a This device complies with Part. 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. Notice Any changes or modification to Transmitter Solutions equipment not expressly approved by Transmitter Solutions could void the manufacturer’s warranty. ® : “Doorking” and “MicroCLIK” are registered trademarks of Doorking, Inc." WARRANTY The warranty period of Transmitter Solutions 318 transmitters is 24 months, beginning from the manufacturing date of the transmitter. During this period, if the product does operate correctly, due to a defective component, the product will be repaired or replaced at the sole discretion of Transmitter Solutions. The warranty does not extend to the transmitter case which can be damaged by conditions outside the control of Transmitter Solutions or to battery life. Fig. 3b TRANSMITTER SOLUTIONS 2505 Chandler Avenue, Suite, 1 Las Vegas, NV 89120 (866) 975-0101 - (866) 975-0404 Fax sales@transmittersolutions.com IS-TM13DCCUK Rev. 4 del 06.06.2006
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2006:06:20 07:06:38Z Modify Date : 2006:06:20 10:16:50-06:00 Page Count : 4 Creation Date : 2006:06:20 07:06:38Z Mod Date : 2006:06:20 10:16:50-06:00 Producer : Acrobat Distiller 5.0 (Windows) Author : product_mgr Metadata Date : 2006:06:20 10:16:50-06:00 Creator : product_mgr Title : IS-TM13DCCUK.cdrEXIF Metadata provided by EXIF.tools