Controlled Entry Distributors DOL318LI4SQ Remote Controller User Manual DOLKWP318LIP4SQ Manual

Controlled Entry Distributors, Inc. Remote Controller DOLKWP318LIP4SQ Manual

UserManual.wiki >

Controlled Entry Distributors >

DOL318LI4SQ User Manual

Users Manual

DOLKWP318LIPSQ318 MHz Keypad

1. Enter the “Master Code” (default is )2. Press the button.3. Enter for change code.4. Enter for Master Code.5. Enter the new “Master Code”6. Press the button.7. If multi-color status LED flash 3 times with green color. Meant code repeated.STEP 2: Programming the Master Code11**4320 01. Enter the “Master Code” (default is )2. Press the button3. Enter for change code4. Enter for the number of user code (eg. “03” for the third user code, etc).5. Enter the new “User Enter Code”(4 digits) 6. Press the button. 7. If multi-color status LED flash 3 times with green color. Meant code repeated.STEP 3: Programming the User Entry Code11**4320 11. Disconnect the power by remove the battery.2. Press 3 6 9 keys simultaneously.3. Power up the keypad again.4. Release 3 6 9 keys.5. Return to default Master Code 1 2 3 4 6. Clean all User Entry Code.Programming the KeypadSTEP 1: Return to Default SettingThe keypad will shut down for approx. 40 seconds if your entry code is not correct within a string of 18 digits. This will discourage an unauthorized person from trying use random numbers to access your property.

1. Enter the “Master Code” (default is )2. Press the button3. Enter 2 for delete a user code4. Enter for the number of user code (eg. “03” for the third user code, etc).5. Press the button. Delete the Programmed User Entry CodeORANGE - Key DepressedRED - Entered Correct Code and TransmittingGREEN - Programming ModeGREEN FLASHING (3 times) - Error During Programming ModeMulti-color Status LED11**4320 1User Enter Code 2 3 4 5 (Note: To reset the access code remove 9 volt battery form unit, Depress any key on the keypad and wait 10 seconds before installing battery. Preset Factory Codes 2 3 4 5 Send a signal to channel 1 of TX module: # 2 3 4 5 - 2Send a signal to channel 2 of TX module:(access code)(access code) # 2 3 4 5 - 3Send a signal to channel 3 of TX module:(access code) # 2 3 4 5 - 4Send a signal to channel 3 of TX module:(access code)