Cooper Lighting HWB1BLE40 HALO Home Internet Access Bridge User Manual

Cooper Lighting LLC HALO Home Internet Access Bridge

User manual

eaton.com/halohomeEaton1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lightingCanada Sales 5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172© 2017 EatonAll Rights ReservedPrinted in ChinaPublication No. IB518105EN October 12, 2017 4:07 PMEaton is a registered trademark.All trademarks are property of their respective owners.Product availability, specifications, and compliances are subject to change without notice.HWB1BLE40AWHSimple. Secure.SMART INTERNET ACCESS BRIDGE*Note: For the wireless downlight to communicate with the app the fixture will need constant power.internet access bridgeSee more products at eaton.com/halohomeMix and match Halo Home productsto personalize your lighting.Halo LED modules*App FeaturesOn/Off/DimSchedulingAdjustable Color Temperature (2700K - 5000K)GroupingSearch for “Halo Home” in your app store.Note: System limits user to 10 groups, 10 scenes and 10 schedules.anyplace bluetooth dimmer switch5-YEAR LIMITED WARRANTYTHE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.Eaton warrants to customers that, for a period of five years from the date of purchase, Eaton products will be free from defects in materials and workmanship. The obligation of Eaton under this warranty is expressly limited to the provision of replacement products. This warranty is extended only to the original purchaser of the product. A purchaser’s receipt or other proof of date of original purchase acceptable to Eaton. This is required before warranty performance shall be rendered. This warranty does not apply to Eaton products that have been altered or repaired that have been subjected to neglect, abuse, misuse or accident (including shipping damages). This warranty does not apply to products not manufactured by Eaton which have been supplied, installed, and/or used in conjunction with Eaton products. Damage to the product caused by replacement bulbs or corrosion or discoloration of brass components are not covered by this warranty.LIMITATION OF LIABILITY:IN NO EVENT SHALL EATON BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS; NOR SHALL THE LIABILITY OF EATON FOR ANY CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF EATON PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF EATON PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.To obtain warranty service, please contact Eaton, at 1-800-334-6871, press option 2 for Customer Service, or via e-mail ConsumerProducts@eaton.com and include the following information: • Name, address and telephone number• Date and place of purchase• Catalog and quantity purchase• Detailed description of problemAll returned products must be accompanied by a Return Goods Authorization Number issued by the Company and must be returned freight prepaid. Any product received without a Return Goods Authorization Number from the Company will be refused. Eaton is not responsible for merchandise damaged in transit. Repaired or replaced products shall be subject to the terms of this warranty and are inspected when packed. Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed with them. Reproductions of this document without prior written approval of Eaton are strictly prohibited.
2Add to the app:Launch the HALO HOME app, go to the “Add device” screen and tap the “+” icon to scan available devices.Important: You will need to have at least one Halo Home compatible device already set up and powered on before you try to connect the Bridge.3Control your lights from anywhere in the world.Simple. Secure.SMART INTERNET ACCESS BRIDGE4What does the Bridge do?The Bridge creates a secure private connection to your local Halo Home network and the Halo Home cloud service using your Wi-Fi router. With the Bridge you will be able to control and manage your local Halo Home devices from anywhere using your mobile device or web browser and the voice control assistant Alexa.+ +Having trouble?There are two ways to refresh your Bridge. You can either reboot it or factory reset it.Reboot:Press the button on the Bridge for one second to reboot the Bridge. This will refresh the Bridge’s connection with the internet.Factory Reset:Having trouble and want to start over? Press the reset button for 12 seconds to reset your Bridge back to factory settings.Light must be installed and paired before starting.1Setup: Unbox the Internet Access Bridge and plug it in to a 110V/277V socket making sure the Bridge is within 50 feet of your Wi-Fi router and 30-70 feet of the nearest Halo Home compatible device.50feet30 - 70feetSelect your Bridge from the list of scanned devices and press “Done”.Choose your preferred Wi-Fi network from the list populated on the app, then enter the Wi-Fi network password to complete the setup.Note: Your wifi network password and your Halo Home password may be different.eaton.com/halohome110/220v compatibleManual resetBluetooth and Wi-Fi indicatorsFCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Eaton is under license. Other trademarks and trade names are those of their respective owners.Industry CanadaThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

Navigation menu