Corbin Russwin CL3300 Parts Manual CL3300Partsmanual
User Manual: Corbin Russwin Corbin CL3300 Parts Manual Parts Manual
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
CL3300 Series Cylindrical Lockset Parts Manual CL3300 Parts Manual Table of Contents Mechanical Drawing.................................................................................................................................................................... 3 Chassis & Buttons........................................................................................................................................................................ 4 Spring Housing Assemblies.......................................................................................................................................................... 5 Roses/Liners and Misc.................................................................................................................................................................. 6 Latches........................................................................................................................................................................................ 7 Strikes.......................................................................................................................................................................................... 8 Standard Levers and Components............................................................................................................................................... 9 Cylinders.................................................................................................................................................................................... 10 Installation Instructions.............................................................................................................................................................. 11 Door Manufacturers Template................................................................................................................................................... 15 BPS Power Supply...................................................................................................................................................................... 16 ElectroLynx® Connector System................................................................................................................................................. 17 How to Order Parts 1. In order to simplify the ordering procedure and maintain regulatory compliance, parts are only available as listed 2. To order parts, provide the appropriate quantity, part number, finish, hand (when required) and description as directed and illustrated below. For example, use the following configuration to order: A) ten chassis in satin chrome B) one outside spring housing assembly in bright brass Quantity Part Number Finish Hand Description A 10 785F008 626 — Passage Function Chassis B 1 783F208 605 — Outside Spring Housing Assembly For assistance, contact your authorized Corbin Russwin distributor, sales agency or visit our website at www .corbinrusswin .com . Finishes ANSI/BHMA Code Finish Description 605 Bright Brass, Clear Coated 606 Satin Brass, Clear Coated 611 Bright Bronze, Clear Coated 612 Satin Bronze, Clear Coated 613 Dark Oxidized Satin Bronze, Oil Rubbed 613E Dark Oxidized Satin Bronze, Equivalent 613L Dark Oxidized Satin Bronze, Clear Coated 618 Bright Nickel, Clear Coated 619 Satin Nickel Plated, Clear Coated 619C Satin Nickel Plated with MicroShield® 625 Bright Chrome Plated 626 Satin Chrome Plated 626C Satin Chrome Plated with MicroShield® 722 Black Oxidized Satin Bronze, Oil Rubbed 2 CL3300 Parts Manual Mechanical Drawing Outside 7 17 13 6 16 5 1 3 2 8 4 5 17 7 9 15 11 12 Inside 10 14 Item Description Page # 1 Chassis 4 2 Liner 6 3 Spring Housing Assembly, Outside 5 4 Spring Housing Assembly, Inside 4 5 Rose 6 6 Cylinder 10 7 Lever 9 8 Button 4 9 Latch 7 10 Screw pack 6 11 Strike 8 12 Strike Box 8 13 Thru Bolt Mounting Pack 14 Thumbturn Assembly (CL3390/CL3391 only) 15 Emergency Release Tool (CL3320 only) 16 Tailpiece Packet 17 Cylinder Retainer 6 3 CL3300 Parts Manual Chassis & Buttons Half Trim Chassis (e.g. CL3380, CL3381, CL3390, CL3391) Standard Chassis Chassis Part # LFIC Part # Function Description 785F008 N/A CL3310 Passage or Closet 785F118 Fin* N/A CL3320 Privacy, Bedroom or Bathroom 785F128 Fin* N/A CL3320H Hospital Privacy 785F138 Fin* N/A CL3320TO Time Out Lock 785F078 Fin* 785F268 Fin* CL3329 Hotel or Motel 785F068 785F258 CL3332 Institutional or Utility 785F028 Fin* N/A CL3340 Patio or Privacy 785F038 N/A CL3340NT Exit Latch 785F018 Fin* 785F218 Fin* CL3351 Entrance or Office 785F048 785F238 CL3352 Classroom Intruder 785F048 785F228 CL3355 Classroom 785F018 785F218 CL3357 Storeroom or CLoset 785F148 785F308 CL3359 Barrier Free Storeroom or Public Restroom 785F118 Fin* 785F298 Fin* CL3361 Entry or Office 785F058 785F248 CL3362 Communicating 785F088 785F278 CL3372 Apartment, Exit or Public Toilet 785F158 Fin* 785F318 Fin* CL3375 Corridor 785F098 N/A CL3380 Passage x Blank 785F108 785F288 CL3381 Keyed Lever x Blank 785F098 N/A CL3390 Passage Lever x Turnpiece 785F108 785F288 CL3391 Keyed Lever x Turnpiece 785F378 Fin* 785F388 Fin* CL3393 Service Station N/A N/A CL3350 Half Dummy N/A N/A CL3370 Full Dummy 785F188 785F348 CL33903 Fail Safe - 12AD 785F168 785F328 CL33903 Fail Safe - 24AD 785F198 785F358 CL33905 Fail Secure - 12AD 785F178 785F338 CL33905 Fail Secure - 24AD * Specify Finish Buttons Part # Function 585F76 Fin* Turnbutton (CL3351) 585F77 Fin* Pushbutton (CL3320, CL3320H, CL3320TO, CL3340, CL3361, CL3375) 585F78 Fin* Hotel button (CL3329) 585F79 Fin* Slotted button (CL3393) *Specify Finish 4 CL3300 Parts Manual Spring Housing Assemblies PART No. 783F208 Spring Housing Assembly, Outside All functions except CL3380 and CL3381 Part No. 783F308 Spring Housing Assembly, Inside (1-3/4"-2" Door) All functions except CL3390 and CL3391 Spring Housing Assemblies Part # Description 783F208 Spring Housing Assembly Outside 783F308 Spring Housing Assembly Inside 1-3/4"-2" 783F408 Spring Housing Assembly Inside 2-1/4" 686F858 Dummy Housing Inside 686F868 Dummy Housing Oustside 5 Part No. 783F408 Spring Housing Assembly, Inside (over 2" - 2-1/4" doors) All functions except CL3390 and CL3391 CL3300 Parts Manual Roses/Liners and Misc Roses Part No. Description 678F25 Fin* Rose 598F59 Fin* Blank Rose 710F618 Rose Liner Inside 1-3/4" - 2" 710F628 Rose Liner Inside Over 2" 678F248 Rose Liner Outside 1-3/4" - 2" 678F498 Rose Liner Outside Over 2" 586F51 Fin* Thumbturn Assembly 1-3/4" - 2" 686F88 Fin* Thumbturn Assembly over 2" 682F788 Rose Liner CL3380, CL3381 Emergency Release Tool Part No. Description 679F818 Emergency Release Tool (CL3320) 601F829 Emergency Release Label (CL3320) Mounting Screw packs Part No. Description 710F658 1-3/4" - 2" Doors 710F668 Over 2" up to 2-1-4" Doors 682F628 CL3380, CL3381 1-3/4" - 2" Doors 682F638 CL3380, CL3381 Over 2" Doors 682F64 Fin* CL3390, CL3391 1-3/4" - 2" Phillips Head 682F67 Fin* CL3390, CL3391 1-3/4" - 2" Spanner Head 682F68 Fin* CL3390, CL3391 1-3/4" - 2" Torx Head 682F65 Fin* CL3390, CL3391 Over 2" Phillips Head 682F86 Fin* CL3390, CL3391 Over 2" Spanner Head 682F87 Fin* CL3390, CL3391 Over 2" Torx Head 684F44 Fin* CL3350 Half Dummy Trim - Phillips Head 684F45 Fin* CL3350 Half Dummy Trim - Spanner Head 684F46 Fin* CL3350 Half Dummy Trim - Torx Head 684F528 Fin* CL3370 Half Dummy Trim * Specify Finish 6 CL3300 Parts Manual Latches Plain Latch - CL3310, CL3320TO, CL3380, CL3390 Part No. Front Front Width Backset 586F16 Square Corner 1-1/8” (29mm) 2-3/4” (70mm) 596F66 Rounded Corner 1-1/8” (29mm) 2-3/4” (70mm) 586F80 Square Corner 1-1/8” (29mm) 3-3/4” (95mm) 586F86 Rounded Corner 1-1/8” (29mm) 3-3/4” (95mm) 598F20 Square Corner 1-1/8” (29mm) 5” (127mm) 601F24 Rounded Corner 1-1/8” (29mm) 5” (127mm) Plain PLAIN PLAIN Deadlocking Latch - All Other Functions Part No. Front Front Width Backset 586F17 Square Corner 1-1/8” (29mm) 2-3/4” (70mm) 596F67 Rounded Corner 1-1/8” (29mm) 2-3/4” (70mm) 586F81 Square Corner 1-1/8” (29mm) 3-3/4” (95mm) 586F87 Rounded Corner 1-1/8” (29mm) 3-3/4” (95mm) 598F21 Square Corner 1-1/8” (29mm) 5” (127mm) 601F25 Rounded Corner 1-1/8” (29mm) 5” (127mm) Deadlocking DEADLOCKING DEADLOCKING Throw-Off Latch - CL3320, CL3320H, CL3329, CL3340, CL3375, CL3393 Part No. Front Front Width Backset 586F18 Square Corner 1-1/8” (29mm) 2-3/4” (70mm) 596F68 Rounded Corner 1-1/8” (29mm) 2-3/4” (70mm) 586F82 Square Corner 1-1/8” (29mm) 3-3/4” (95mm) 586F88 Rounded Corner 1-1/8” (29mm) 3-3/4” (95mm) 598F22 Square Corner 1-1/8” (29mm) 5” (127mm) 601F26 Rounded Corner 1-1/8” (29mm) 5” (127mm) Throw Off THROW-OFF THROW-OFF 3/4” Throw Deadlocking Fire Latch Part No. Front Front Width Backset 601F69 Square Corner 1-1/8” (29mm) 2-3/4” (70mm) 3/4" Throw Deadlocking 3/4" 3/4"THROW THROW Fire Latch DEADLOCKING DEADLOCKING for pair of doors FIRE FIRELATCH LATCH for forPair Pairof ofDoors Doors When ordering latchbolt, specify Part No. x Finish (e.g., 586F16 x 626) 7 CL3300 Parts Manual Strikes ANSI Curved Lip (standard) Curved Lip "T" Strike Brass or stainless steel. 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Optional lip lengths: 1" (25mm), 1-1/8" (29mm), 1-3/8" (35mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm). To order separately, specify 217L13 x Lip Length x Finish. Brass. 2-3/4" (70mm) x 1-1/8" (29mm) x 1-1/4" (32mm) lip to center. Optional lip lengths: 1" (25mm), 1-1/8" (29mm), 1-3/8" (35mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm). To order separately, specify 586L19 x Lip Length x Finish. ANSI Wrought Strike Box Rabbeted Front and Strike To order separately, specify 120F76-8. Brass or bronze. 4" (102mm) x 5/8" (16mm) for 1/2" (13mm) rabbet. No optional lip lengths. To order separately, specify 601F28 x Finish. Strikes - 4-7/8" ANSI Curved Lip Part No. Description Strike Box Part No. Description 217L13M016 Fin* 1" Lip Length 217L13M018 Fin* 1-1/8" Lip Length 217L13M020 Fin* 1-1/4" Lip Length 217L13M022 Fin* 1-3/8" Lip Length Part No. 217L13M024 Fin* 1-1/2" Lip Length 315F93 Fin* 217L13M028 Fin* 1-3/4" Lip Length 217L13M032 Fin* 2" Lip Length 217L13M036 Fin* 2-1/4" Lip Length 217L13M040 Fin* 2-1/2" Lip Length 217L13M044 Fin* 2-3/4" Lip Length 217L13M048 Fin* 3" Lip Length Strikes - 2-3/4" T- Curved Lip Part No. 120F768 4-7/8" ANSI strike box Front Plate Rabbetted Strike Description Fin 606, 612, 619, 626, 605, 611, 613, 625 Rabbetted Strike Part No. Description 315F94 Fin* Fin 606, 612, 619, 626, 605, 611, 613, 625 601F283 Fin* Rabbetted Strike & Front Latch & Strike Screw packs Part No. Description Description 604F228 Fin* Latch & ANSI Strike (4-7/8") - Phillips Head 586L19M016 Fin* 1" Lip Length 604F238 Fin* Latch & ANSI Strike (4-7/8") - Spanner Head 586L19M018 Fin* 1-1/8" Lip Length 604F248 Fin* Latch & ANSI Strike (4-7/8") - Torx Head 586L19M020 Fin* 1-1/4" Lip Length 604F268 Fin* Latch & T-Strike (2-3/4") - Phillips Head 586L19M022 Fin* 1-3/8" Lip Length 604F278 Fin* Latch & T-Strike (2-3/4") - Spanner Head 586L19M024 Fin* 1-1/2" Lip Length 604F288 Fin* Latch & T-Strike (2-3/4") - Torx Head 586L19M028 Fin* 1-3/4" Lip Length 480F688 Fin* Rabbetted Front & Strike - Phillips Head 586L19M032 Fin* 2" Lip Length 596F618 Fin* Rabbetted Front & Strike - Spanner Head 586L19M036 Fin* 2-1/4" Lip Length 596F628 Fin* Rabbetted Front & Strike - Torx Head 586L19M040 Fin* 2-1/2" Lip Length 586L19M044 Fin* 2-3/4" Lip Length 586L19M048 Fin* 3" Lip Length *Specify finish 8 CL3300 Parts Manual Standard Levers and Components Newport Armstrong Princeton Frascati NZD AZD PZD FZD Lever: Die cast zinc Rose: Wrought brass Lever: Die cast zinc Rose: Wrought brass 1 3 /2” 31/2” 1 3 /2” Lever: Die cast zinc Rose: Wrought brass 9 2 /16” ” ” ” 51 /4” 5 /8 6 13 /1 53 /4” 2 2 6 13 /1 ” 1 6” 41 /1 2 6 13 /1 2 5” Lever: Die cast zinc Rose: Wrought brass Levers for Doors 1-3/4" - 2" Doors* Application NZD AZD PZD FZD x RH FZD x LH Plain 563F945 563F885 799F505 712F505 712F205 Cylinder or Button 563F955 563F895 799F515 712F515 712F215 Intruder 714F065 714F005 799F535 712F685 712F385 Emergency Key Hole 563F965 563F905 799F525 712F525 712F225 LFIC Cylinder - 6 Pin 585F715 585F705 799F565 712F545 712F245 LFIC Cylinder - 6 Pin Intruder 714F365 714F305 799F575 712F705 712F405 LFIC Cylinder - 7 Pin 600F415 600F425 799F585 712F555 712F255 LFIC Cylinder - 7 Pin Intruder 714F375 714F315 799F595 712F715 712F415 SFIC Cylinder Cutout 596F825 NA 799F805 712F565 712F265 SFIC Cylinder Cutout Intruder 714F425 NA 799F815 712F725 712F425 Schlage LFIC Cylinder Cutout 690F975 NA 799F825 712F575 712F275 Schlage LFIC Cylinder Cutout - Intruder 714F455 NA 799F835 712F735 712F435 Sargent Cylinder Cutout 578F435 695F075 799F545 712F535 712F235 Sargent® Cylinder Cutout - Intruder 714F125 714F035 799F555 712F695 712F395 Application NZD AZD PZD FZD x RH FZD x LH Plain 684F825 684F775 799F605 712F605 712F305 ® ® ® Levers for Doors 2" - 2-1/4" Doors* Cylinder or Button 684F835 684F785 799F615 712F615 712F315 Intruder 714F215 714F155 799F635 712F745 712F445 Emergency Key Hole 684F845 684F795 799F625 712F625 712F325 LFIC Cylinder - 6 Pin 684F865 684F805 799F665 712F645 712F345 LFIC Cylinder - 6 Pin Intruder 714F545 714F485 799F675 712F765 712F465 LFIC Cylinder - 7 Pin 684F875 684F815 799F685 712F655 712F355 LFIC Cylinder - 7 Pin Intruder 714F555 714F495 799F695 712F775 712F475 SFIC Cylinder Cutout 684F885 NA 799F845 712F665 712F365 SFIC Cylinder Cutout Intruder 714F605 NA 799F855 712F785 712F485 Schlage LFIC Cylinder Cutout 690F985 NA 799F865 712F675 712F375 Schlage LFIC Cylinder Cutout - Intruder 714F635 NA 799F875 712F795 712F495 Sargent Cylinder Cutout 684F855 697F995 799F645 712F635 712F335 Sargent® Cylinder Cutout - Intruder 714F275 714F185 799F655 712F755 712F455 ® ® ® *Specify Finish 9 CL3300 Parts Manual Cylinders â â Access 3® - .510” plug diameter Pyramid - .496" plug diameter Conventional - .509" plug diameter Security - .552" plug diameter Brass, 6-pin 2 nickel silver keys Finishes: 606, 626 Access 3® - .510" plug diameter Pyramid - .496" plug diameter Conventional - .509" plug diameter Security - .552" plug diameter Brass, 6-pin 2 nickel silver keys Finishes: 605, 606, 611, 612, 613, 613E, 613L, 618, 619, 625, 626, 722 Standard Cylinder Interchangeable Core Cylinder Parts Conventional 6-Pin 2000-033 (Std.) 8000 Part # Description Conventional 7-Pin 2000-033-7 8000-7 622F308 Tailpiece 6-pin Emhart Security 2010-033 8010 682F298 Tailpiece 7-pin Hotel 6-Pin 2001-034 8001-034 631F248 Corbin Russwin LFIC core kit Hotel 7-Pin 2001-034-7 8001-034-7 682F958 SFIC tailpiece kit Access 3 - AP Type 2500-033 8500 682F969 Sargent® tailpiece kit Access 3® - AS Type 2600-033 8600 697F942 Schlage® LFIC tailpiece kit Access 3 - AHS Type 2700-033 8700 682F398 Schlage® tailpiece kit Pyramid Security 2027-033 8027 Pyramid High Security 2020-033 8020 Schlage C Keyway (0-Bitted) 2400-033-C NA Schlage C Keyway (Keyed Random) 2400-033-C-KR NA Sargent® LA Keyway (0-Bitted) 2400-033-LA NA ® ® ® ® Compatibility with Competitive Cylinders Competitive Cylinders Parts Required for Installation Schlage® conventional 21-002, 23-001 or 23-013 (Quick Code M06) 682F39-8 Tailpiece included with M06 options. Schlage® Primus 20-548, 20-78 or 20-750 (Quick Code M06) 682F39-8 Tailpiece included with M06 options. SFIC style core, 6 or 7 Pin (Quick Code M08) 682F95-8 specify option M08 Accommodates 6 and 7 pin cores Sargent® 13-3268 (Quick Code M09) 682F96-9 Tailpiece Kit and Special Lever specify option M09 Schlage® LFIC Core (Quick Code M69) 697F942 Tailpiece and Special Lever specify option M69 Corbin Russwin LFIC Tailpiece 631F248 10 CL3300 Parts Manual Installation Instructions Installation Instructions ® Grade 1 Key-In-Lever Cylindrical Lockset CL3300 Series In U.S.: Corbin Russwin, Inc. 225 Episcopal Road Berlin, CT 06037 USA www.corbinrusswin.com ASSA ABLOY In Canada: ASSA ABLOY Door Security Solutions Canada 160 Four Valley Drive Vaughan, Ontario, Canada L4K4T9 www.assaabloy.ca Technical Product Support: Phone: 888-607-5703 IMPORTANT: The accuracy of the door preparation is critical for the proper functioning and security of this lever handle lock. Misalignment can cause premature wear and a lessening of security. *Standard Installation for 1-3/4" doors. See page 2 to adjust for other door thicknesses. Attention Installer Please read these instructions carefully to prevent missing important steps. Please note: Improper installation may result in damage to the lock and void the factory warranty. A Install Latchbolt 1 B C Install Lockbody Install Inside Trim 3 4 5 6 2 7 OR 4 A 1 C 5 2 6 OR DO GE ED LOCK OR LATCH B 3 mlw - 07/25/08 OR DO GE ED SINGLE POINT 7 Lin e-u pN otc SINGLE POINT LOCK OR LATCH hes TEST OPERATION: Rotate levers to see that latchbolt moves freely. DO NOT FORCE. If lockset does not operate properly, remove lockset from door and check door preparation. Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written Permission of Corbin Russwin, Inc. is prohibited. FM533 (07/12) 11 1 of 4 CL3300 Parts Manual Installation Instructions ® Adjust Lock for Door Thickness Door & Frame Preparation Mark door ASSA ABLOY Adjust lock to door thickness if other than 1-3/4” (44mm) doors *. (Lock pre-set from factory for 1-3/4” door). Locate and mark horizontal center line at desired height above floor. Fold template over edge of door, centering on horizontal line. Mark centers of holes at proper backset. Mark both sides of the door. A. Remove outside lever (see page 4) B. Slide off outside cassette assembly. C. Rotate rose liner to adjust lock to fit door thickness, so that the distance (Dim. “A”) from the inside of the liner to the centerline of the retractor is one half of the thickness of the door (see chart). D. Re-assemble outside cassette assembly onto chassis assembly (except CL3380 and CL3381 functions). *Note: For doors more than 2”, verify lock package is labeled with “D214” option. Note: Be sure to verify backset before marking & drilling door. Outside Rose Liner Drill door A. 2-1/8” (54mm) hole thru door. Cut ANSI tab notches as shown on template (except CL3350 and CL3370). B. Drill 1” (25mm) hole in edge of door. Cut out for latch front 5/32” (4mm) deep. 1-1/8” (29mm) wide x 2-1/4” (57mm) high. Check latch unit for proper width front and square or round corners (except CL3350 and CL3370). C. Chassis Assembly Outside Cassette Assembly Drill two (2) 11/32” (8mm) Dia. holes through door for all functions. Lever Catch Caution: To avoid splintering wood doors, drill holes from both sides. Install Strike 2 of 4 Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. Door Thickness* “A” 1-3/4” (44) 7/8” (22) 2” (50) 1” (25) 2-1/4” (57) 1-1/8” (29) FM533 (07/12) 12 CL3300 Parts Manual Installation Instructions ® Cylinder Installation To Install Interchangeable Core (With lever already installed on lock) To Remove Interchangeable Core A. Install Tailpiece ASSA ABLOY A. Insert key marked CONTROL and turn clockwise approximately 15 degrees. See Figure 4. Tailpiece Tailpiece Security Disc** B. Pull core and tailpiece completely out of lever. Figure 4 Corbin Russwin Core Spacer (Used with 6 Pin Cylinder Only) ** Verify that security disc is installed for either 6 or 7 pin Corbin Russwin or small format cores. Install Standard Cylinder Make sure lock is unlocked. A. Make sure cylinder tailpiece is aligned in same direction as cylinder bible. Slide cylinder all the way into lever. • For 6-pin cylinder: Fold retainer at hinge and press fit retainer halves together as shown. Schlage® Core Tailpiece set for all Schlage cores except Primus Tailpiece Set for Primus B. Insert key marked • For 7-pin cylinder: Break retainer at hinge and discard spacer section. Also remove black cylinder spacer from inside of chassis rollback for clearance. Figure 2 CONTROL and turn clockwise approximately 15 degrees. See Figure 2. C. Insert core into lever and return key to its original horizontal position locking core in place. See Figure 3. Standard Cylinder Tailpieces D. Withdraw key. Test lockset for correct function with operating key. ACTUAL SIZE SHOWN E. Control key has no further use in lockset installation and must be safeguarded for return to Security personnel when installation is complete. 7/8" (22) 6 PIN 11/16" (17) 7 PIN Figure 3 CL3355 Classroom or CL3352 Intruder (outside cylinder) Function Timing Before installing cylinder: Corbin Russwin conversion kit for Schlage ® cylinders with CL3300 lockset. 1. Remove threaded collar and Schlage ® tailpiece. • Turn Cam so points are up and down, 6 o’clock and 12 o’clock (See Below) Cam Lever Catch After installing cylinder, test operation: 12 9 12 3 6 • Key should rotate 180° both ways CORRECT • If cylinder rotates 360°, remove cylinder and check cam orientation. 9 3 6 WRONG 2. Install CL3300 tailpiece with threaded collar. (adjust collar for proper end play of plug.) Other product brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference only. Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written Permission of Corbin Russwin, Inc. is prohibited. FM533 (07/12) 13 3 of 4 CL3300 Parts Manual Installation Instructions ® Lever Removal and Installation ASSA ABLOY LEVER STYLE REMOVAL INSTALL Hold in button, push release tool into release hole, remove lever Push button in, slide lever on. Push / Turn Button RELEASE TOOL Make sure lever will not pull off Plain Lever Push release tool into release hole, remove lever RELEASE TOOL Cylinder Lever Rotate key 45° clockwise (from shed position), Push in release tool into release hole, remove lever RELEASE TOOL Slide lever over lever catch. Make sure lever will not pull off Insert key and rotate 45° (from shed position), slide lever on. Make sure lever will not pull off Interchangeable Core Lever LEVER CATCH (Move in direction of arrow) ROSE LEVER Remove cylinder and tailpiece, (see page 3) Use flat blade screwdriver to pull back lever catch, remove lever Slide lever over lever catch Make sure lever will not pull off Optional Installations For CL3380 & CL3381 Function Only. For CL3390 & CL3391 Function Only. 45° FRONT VIEW OF TURNPIECE 45° #8-32 SELF TAPPING SCREWS 4 of 4 Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. FM533 (07/12) 14 CL3300Parts PartsManual Manual CL3300 DoorManufacturer’s ManufacturersTemplate Template Door Notes: TEMPLATE CROSS REFERENCE 1. Backset is measured from centerline of bevel which is centerpoint DESCRIPTION TEMPLATE of door thickness. CL3350 & CL3370 Dummy Trim T30685 2. Door prep with 2-3/4” (69.9) backset meets ANSI/BHMA A156.115 T30476 for steel doors and A156.115W for wood doors plus through bolt holes shown. 586L19 Optional Strike M16 3/4" Latch T30528 3. Dimensions given in inches and (MM). 601F28 Rabbeted Front & Strike 4. 1-1/4” strike lip suits frame for 1-3/4” thick door. Lip will vary for other T30640 door thickness. 5. Door prep will vary for 3/4” (19) latch assembly. Refer to template T30528 for details. SQUARE EDGE BEVELED EDGE 5/32 (4) +/-.005 5/32 +/-.005 (4) Door Thickness CL Strike/Loc k/Door CAUTION: DOOR AND FRAME MANUFACTURERS When door gasketing or silencers are used, proper allowances must be made for strike location to maintain a common centerline with lock and door as shown so that bolt will freely enter strike. 1 Min (25.4) 3/32 (2.4) 1-1/4 Min (31.8) Plaster Guard by Fr ame Manuf acturer 1-1/4 +.015 -.000 (31.8) 9/32 R. (7.1) (4 Places) CL BEVEL 1/8" in 2" (3. 2) (50.8) A Backset (See Note 1) Profile of optional rounded corner front 1-1/4 (See Note 4) (31.8) CL Strike/Lock 5/8 (15.9) 3-1/2 Dia. (89) CL Loc k/Door 2-1/8 Dia. thru (54) 5/16 (7.9) Max Min 9/16 (14.3) 4-7/8 (123.8) +.015 -.000 3-3/8 (85.7) +/-.005 4-1/8 (104.8) RESPONSIBILITY Door and Frame Manuf acturers are responsible for providing adequate construction or reinforcements for proper installation of hardware shown. All architectural builders hardware must be installed on proper ly reinforced doors and frames , regardless of the type, material, or method of construction. 1-3/8 (35)2-3/4 1-5/8 (41.3) +/-.005 CL Strike/ Lock/ Prep (70) +.015 2-1/4 -.000 (57.2) #12-24 Tap for 1/2 Min Combination Screw (2 Places) (13) FRAME DETAIL ANSI Strike 217L13 and Box 120F76 (Regularly Furnished) Optional 2-15/32 (62.7) +.015 -.000 1-13/16 (46) 3-1/2 1-1/4 (88.9) (31.8) Min Regular CL Loc k/Prep 1-1/8 +.015 -.000 (28.6) 3/4 3/8 (19) (9.5) BA CKSET "A" 2-3/4 (69.9) 3-3/4 (95.3) 5 (127) #8-32 Tap for Combination Scre w (2 Places) 5/32 (4) 5/16 Dia. thru (8) (2 Places) 1" (25.4) Dia. or 1" (25.4) Square to prep hole CL3300 Series Cylindrical Lever Lockset All Functions And Trims Except Dummy Trim, and M16 latch (3/4") 1514 TOLERENCES INCHES .005 .015 DOOR DETAIL www.corbinrusswin.com Supersedes Date 2-00 Do Not Scale Drawing Dr. Template Number App. T30684 (mm) (.127) (.381) CL3300 Parts Manual BPS Power Supply Power supplies are designed to provide reliable filtered and regulated power for long life to a variety of electrified hardware components. All modular power supplies are voltage specific and are designed to meet UL 1481 Standards. Features • Fire panel emergency release input • PC Board mounted system LED indicator • Voltage specific 12 or 24VDC • Regulated and filtered with input and output protection • Battery charging is provided from a separate output terminal Model BPS-12-1 BPS-12-3 BPS-24-1 BPS-24-2 Input 115VAC @ 50/60 Hz 115VAC @ 50/60 Hz Output 1 Amp @ 12VDC 3 Amp @ 12VDC 1 Amp @ 24VDC 2 Amp @ 24VDC 16 CL3300 Parts Manual ElectroLynx® Connector System ElectroLynx® Connector System For ASSA ABLOY Group Doors and Hinges with ElectroLynx® Connector System • Plug 8-pin lock connector into 8-pin door connector (4-pin door connector not used for this application). For non ElectroLynx Connector System, door install available retrofit harness and use with ElectroLynx hinge. Follow installation instructions for ElectroLynx Connector System. For non ElectroLynx Connector System door and hinge, remove connector on lock (warranty void if rectifier module is removed). Use proper crimp splices or wire nuts in accordance with local code for terminating connections. No polarity of wires is required. • • Use template T30971 for door preparation Install lock per instruction sheet provided Plug 8-pin door connector into 8-pin hinge connector (4-pin door connector not used for this application). • Electrical Specifications 24 Volts AC/DC +/-10% Operating Current .150 AMP 12 Volts AC/DC +/- 10% Operating current .250 AMP Not Used X • Wire hinge to power source 12 or 24VDC Power Supply (Recommended Securitron BPS series) Normally Closed Fire Alarm Contact (If Required) Pigtail harness (Supplied with McKinney Hinge) (2 wires with 8-pin connector) Red (+), 2 C NC Switch or relay contacts Input LN 120VAC GND 60HZ +- 12 or 24VDC Black (-), 1 Plug into 8-pin hinge connector at door 120VAC L/N/G ElectroLynx® As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group companies offer ElectroLynx®, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx® is a registered trademark of ASSA ABLOY Inc. 17 CL3300 Parts Manual Notes 18 CL3300 Parts Manual Notes 19 In U.S. Corbin Russwin Architectural Hardware 225 Episcopal Road Berlin, CT 06037 Phone: 800-543-3658 Fax: 800-447-6714 corbinrusswin.com In Canada ASSA ABLOY Door Security Solutions Canada 160 Four Valley Drive Vaughan, Ontario Canada L4K 4T9 Phone: 800-461-3007 Fax: 905-738-2478 www.assaabloy.ca For more information regarding Corbin Russwin Locksets, Exit Devices, Door Controls and Key Systems, contact your authorized Corbin Russwin Distributor or Sales Representative. ElectroLynx® As part of their promise to provide innovative, fast and effective high security solutions to their customers, certain ASSA ABLOY Group brands offer ElectroLynx®, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx® is a registered trademark of ASSA ABLOY Inc. Corbin Russwin and Design® is a registered trademark of Corbin Russwin, Inc, an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under US copyright laws. All contents current at time of publication. Corbin Russwin, Inc., an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2000-2016 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45260-3/16R
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:956fce97-3f04-924f-8b40-ba00c7123402 Original Document ID : adobe:docid:indd:aecbc60f-ac08-11de-9ef6-fd7a0311df56 Document ID : xmp.did:DF69CF83892168118C14E4CAC64DA1C7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:D853DE14322168118C14E4CAC64DA1C7 Derived From Document ID : xmp.did:018011740720681192B0DF7434A78925 Derived From Original Document ID: adobe:docid:indd:aecbc60f-ac08-11de-9ef6-fd7a0311df56 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:73A3A8F5152068118083F83CA2CC9C1A, xmp.iid:74A3A8F5152068118083F83CA2CC9C1A, xmp.iid:C376CACC412068118083F83CA2CC9C1A, xmp.iid:820D1A2BFC2068118083F83CA2CC9C1A, xmp.iid:22E759BF5420681188C6AC9CFFC5F7F4, xmp.iid:BC3259505B20681188C6AC9CFFC5F7F4, xmp.iid:99C017A87020681188C6AC9CFFC5F7F4, xmp.iid:0266B486162068118083AF29EF312C26, xmp.iid:38C78D9BD52068118083AF29EF312C26, xmp.iid:45A14674072068118083DDF7FBCE813F, xmp.iid:46A14674072068118083DDF7FBCE813F, xmp.iid:6C44B58A082068118083DDF7FBCE813F, xmp.iid:C8FCA910102068118083DDF7FBCE813F, xmp.iid:E9148B6A202068118083DDF7FBCE813F, xmp.iid:2856071A212068118083DDF7FBCE813F, xmp.iid:4865F605092068118083B192F6BDAD8F, xmp.iid:1115B641092068118083B192F6BDAD8F, xmp.iid:12F00455092068118083B192F6BDAD8F, xmp.iid:4CD9CDAE10206811822AFB433577BB88, xmp.iid:0F9218B32D2068118A6D88D80D6E057F, xmp.iid:630495E33A2068118A6D88D80D6E057F, xmp.iid:FB4174281E206811822A8A36A5D19D71, xmp.iid:FC4174281E206811822A8A36A5D19D71, xmp.iid:222A0A841E206811822A8A36A5D19D71, xmp.iid:B816D06844206811822A8A36A5D19D71, xmp.iid:B916D06844206811822A8A36A5D19D71, xmp.iid:079984360820681192B0DF7434A78925, xmp.iid:089984360820681192B0DF7434A78925, xmp.iid:38D6E3091320681192B0DF7434A78925, xmp.iid:774820F28520681192B0DF7434A78925, xmp.iid:83029D7F2621681188C6CA80FE7DB6C3, xmp.iid:193CB5433121681188C6CA80FE7DB6C3, xmp.iid:65CDFBC03A21681188C6CA80FE7DB6C3, xmp.iid:05BDD56C3B21681188C6CA80FE7DB6C3, xmp.iid:D62FD28C972268118C14D1BF712C6FFE, xmp.iid:D2F492099D2268118C14D1BF712C6FFE, xmp.iid:7072A46C5F2068118C14ACF46F73B678, xmp.iid:8AB32274072068118A6DA2C3087B8999, xmp.iid:CA73331C0E2068118A6DA2C3087B8999, xmp.iid:24C80610122068118A6DA2C3087B8999, xmp.iid:38441C3E372068118A6DA2C3087B8999, xmp.iid:21877EF6682068118A6D981AF8C955C9, xmp.iid:42F2DFB6A12168118A6D981AF8C955C9, xmp.iid:8CC4772C5D20681188C6F90EA438E77A, xmp.iid:D853DE14322168118C14E4CAC64DA1C7, xmp.iid:DF69CF83892168118C14E4CAC64DA1C7, xmp.iid:A13EC93D8A2168118C14E4CAC64DA1C7, xmp.iid:C87EB4AA972168118C14E4CAC64DA1C7, xmp.iid:F04B0050AC2168118C14E4CAC64DA1C7, xmp.iid:3892EBFAFD2068118A6DF44310581A72, xmp.iid:07E5ABDEFE2068118A6DF44310581A72, xmp.iid:BAFC615E0D20681188C69018425C4DE3, xmp.iid:5E29FF21C12068118C14E77C6DBDA7C5, xmp.iid:4B116DA81F20681188C692D7DF46AAB2, xmp.iid:8D33AD132320681188C692D7DF46AAB2, xmp.iid:80966F722420681188C692D7DF46AAB2, xmp.iid:B424046D1820681188C69ECB255FB0F8, xmp.iid:4184FEA8312068118C14C682AA324CBC, xmp.iid:D8AF9A35342068118C14C682AA324CBC, xmp.iid:56F36EAC9D2168118C14AB459C62E0E8, xmp.iid:5BC732C70C2068118C14CD5B8E5518A3 History When : 2010:12:14 20:05:49-05:00, 2010:12:14 20:05:49-05:00, 2010:12:15 17:54:24-05:00, 2010:12:17 13:55:41-05:00, 2013:11:25 16:01:03-05:00, 2013:11:25 16:48:03-05:00, 2013:11:26 08:20:04-05:00, 2013:11:26 14:03-05:00, 2013:11:27 12:50:49-05:00, 2014:01:21 08:51:01-05:00, 2014:01:21 08:51:01-05:00, 2014:01:21 08:58:48-05:00, 2014:01:21 09:52:39-05:00, 2014:01:21 11:54:35-05:00, 2014:01:21 11:54:35-05:00, 2014:01:28 10:06-05:00, 2014:01:28 10:08:13-05:00, 2014:01:28 10:08:13-05:00, 2014:01:31 16:11:44-05:00, 2014:02:06 15:03:41-05:00, 2014:02:06 15:03:41-05:00, 2014:02:17 14:54:28-05:00, 2014:02:17 14:57:01-05:00, 2014:02:17 14:57:01-05:00, 2014:02:18 09:18:37-05:00, 2014:02:18 09:18:37-05:00, 2014:02:18 10:09:41-05:00, 2014:02:18 10:09:41-05:00, 2014:02:18 11:27:11-05:00, 2014:02:19 14:45:32-05:00, 2014:03:18 10:13:56-04:00, 2014:03:18 11:31-04:00, 2014:03:18 12:38:56-04:00, 2014:03:18 12:43:44-04:00, 2014:05:13 13:24:08-04:00, 2014:05:13 14:03:25-04:00, 2014:05:15 12:17:42-04:00, 2014:05:16 11:17:38-04:00, 2014:05:16 12:05:17-04:00, 2014:05:16 12:33:35-04:00, 2014:05:16 16:59:44-04:00, 2014:06:06 09:32:19-04:00, 2014:06:09 14:47:35-04:00, 2014:06:15 10:34:53-04:00, 2014:06:20 08:48:30-04:00, 2014:06:20 08:48:33-04:00, 2014:06:20 08:53:45-04:00, 2014:06:20 10:29:52-04:00, 2014:06:20 12:57:38-04:00, 2014:06:28 09:18:23-04:00, 2014:06:28 09:24:45-04:00, 2014:06:30 11:24:42-04:00, 2014:07:12 10:18:12-04:00, 2014:07:24 12:59:44-04:00, 2014:07:24 13:24:13-04:00, 2014:07:24 13:34:01-04:00, 2014:07:29 09:46:48-04:00, 2015:11:23 14:05:41-05:00, 2015:11:23 14:23:55-05:00, 2016:03:11 10:58:10-05:00, 2016:03:14 11:25:48-04:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2016:03:16 16:34:56-04:00 Modify Date : 2016:03:16 16:36:07-04:00 Metadata Date : 2016:03:16 16:36:07-04:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 4938 bytes, use -b option to extract), (Binary data 9634 bytes, use -b option to extract) Doc Change Count : 2417 Key Stamp Mp : AAAAAA== Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 20 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools