Corbin Russwin FM 316 12 08 09 ED4200, ED4200M, ED4200MA, ED4200S, ED4200SM, ED4200SMA Series Rim & Secure Bolt FM316

ED4200, ED4200M, ED4200MA, ED4200S, ED4200SM, ED4200SMA Series Rim & SecureBolt™ Exit Devices FM316 Installation Instructions

User Manual: Corbin Russwin ED4200, ED4200M, ED4200MA, ED4200S, ED4200SM, ED4200SMA Series Rim & SecureBolt Wiring Diagrams and Instructions

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

ED4200, ED4200M, ED4200MA
ED4200S, ED4200SM, ED4200SMA
Series Rim & SecureBolt ® Exit Devices
Installation Instructions FM 316 6/09 (617419090)
(Single Doors or Pairs with Mullion)
Note: These installation instructions cover standard product only. To install options, such as
shim kits or interlock brackets, refer to the instructions packed with the optional component.
Packed for reinforced metal doors.
Optional sex nuts required for unreinforced metal and composite wood doors and are
furnished standard with all fire-rated (A) devices.
Outside Trim: Device is packed ready for any applicable Corbin Russwin Trim.

Rim Device Shown
SecureBolt TM

(3) #10-24 PFHMS

Not a feature of Fire Rated Devices

1

General Information
ED 4200, ED4200S
For Narrow Stile Metal Doors of Either
Hand

ED 4200M, ED4200MA, ED4200S,
ED 4200SMA
For Metal, Composite and Wood Doors of
Either Hand

Shim Kit Option
697F35-8, Black Finish
Maintenance
1. Periodically remove covers and coat mechanisms with a
silicone base lubricant. This is particularly required in
corrosive environments for proper product function.
2. Check mounting fasteners periodically. Retighten if
found loose. Apply screw looking compound (available
at automotive part stores) or change part fasteners if
screws continue back up.
3. Periodic checks and adjustments of strike are required to
compensate for changes in the opening (e.g.; door
sagging, etc....).

Specify Finish

Kit consists of (2) Latch Head Shims
(Device Cover seats on shim) and (2)
End Cap Shims (End Cap Shims (End
Cap seats on shim).
Each shim is 1/8ʼ (3.2mm) thick.
More than two shim thicknesses
1/4” (6.4mm), require longer device
mounting screws (not included).

Recommended for un-reinforced metal doors.
Standard for Fire Rated Doors.

Device

Rim Qty

SecureBolt™ Qty

Size

(No Trim)

4

6

1/4 - 20

(With Trim)

2

2

1/4 - 20

Fire Mullion (Add)

4

4

10 - 24

2

ED4200 & ED4200S
Minimum Door Stile 2” (50mm)
ED4200M, ED4200MA, ED4200SM & ED4200SMA
Minimum Door Stile 3 1/2” (89mm)
Door and Frame must meet structural and
dimensional specifications on exit device
template(s) for door and frame preparation.

3

ED4200, ED4200S with 808 Mullions

ED4200M, ED4200MA, ED4200SM, ED4200SMA
with 700 & 900 Mullions with 650F308 strikes

4

A = 1 1/4” (32mm)
B = 3/4” (29mm)

ED4200M, ED4200MA
ED4200SM, ED4200SMA

Caution:
The Use of Shims
(i.e. Raised Glass)
requires shifting
location of strike
away from the
door. (See Door
Marker Template
for details).

ED4200, ED4200S

5

Soffit to Cutoff

For ED4200 & ED4200S

6

One shim Kit 697F35-8 required
for each 1/4” (6mm) of device lift
needed. Each Shim kit includes 2
1/8” (3mm) thick shims. Longer
device mounting screws needed
when more than (2) shim kits are
used. See Shim Kits Option on
page 2.

.

When resulting operation is faulty, check first for visible binding or interference. If there is no
apparent reason for the fault, remove item from the door and recheck its operation and door
preparation before assuming it is defective.

7

ED4200, ED4200S

8

ED4200M, ED4200MA, ED4200SM, ES4200SMA

(3) #10-24 PFHMS

Use 8-32 PFHMS screws (2) for Cover and (3) for End Cap.

9

In U.S.: Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037-4004
www.corbinrusswin.com

In Canada: ASSA ABLOY
Door Security Solutions Canada
160 Four Valley Drive
Vaughan, ON, L4K 4T9
www.assaabloy.ca

Technical Product Support:
Telephone: 888-607-5703
Fax: 800-659-7293

Copyright © 2008-2009 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the expressed
written permission of Corbin Russwin, Inc. is prohibited

10



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Apple Keywords                  : 
Author                          : Frank Czerwinski
Create Date                     : 2009:12:08 19:26:35Z
Modify Date                     : 2009:12:08 14:31:29-05:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Frank Czerwinski
Description                     : 
Title                           : FM 316 12 08 09
Creator Tool                    : Pages
Metadata Date                   : 2009:12:08 14:31:29-05:00
Keywords                        : 
Producer                        : Mac OS X 10.6.2 Quartz PDFContext
Document ID                     : uuid:657bce40-b02a-43e5-a0d2-4d21c828075c
Instance ID                     : uuid:4369c4c4-7aec-41b0-823d-0d7eceb61245
Page Count                      : 10

EXIF Metadata provided by EXIF.tools