Corbin Russwin ED3200/ED3200A Series Rim Type Exit Device FM36205 15

ED3200/ED3200A Series Rim Type Exit Device CorbinFM362 Installation Instructions

User Manual: Corbin Russwin ED3200/ED3200A Series Rim Type Exit Device Wiring Diagrams and Instructions

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

®

Installation Instructions
ED3200/ED3200A Series
Rim Exit Device

In U.S.:
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
www.corbinrusswin.com

ASSA ABLOY

In Canada:
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, Canada L4K4T9
www.assaabloy.ca

Technical Product Support: Phone: 888-607-5703

FM362 (05/15)

To view helpful video installation tips, scan the Microsoft® Tags with your
mobile phone. Download the free mobile app at http://getscanlife.com.

Inactive Case
Chassis
Inactive Case
Cover
Tools Required
1. Measuring tape
2. Power drill
3. Drill bits:
3/32",1/4",11/32", 3/8", #25
4. Taps:#10-24
5. Screwdrivers: Phillips #2 and #3

Active Case
Chassis
Hex Dogging Key

Plug

Active Case
Cover

Locking
Screw
Crossbar

Check Application For Proper Hand
And Function. If Required, Adjust Exit
Device As Follows:

LHR
Left Hand Reverse
Hinges Left
Open Outward

FM362 (05/15)

Locking
Screw

RHR
Right Hand Reverse
Hinges Right
Open Outward
Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.

1 of 6

®

ED3200/ED3200A Series Rim Exit Device
ASSA ABLOY
To Change Hand

Pivot

A

Unscrew Pivot and
Remove Spring
Support Assembly

B

Unscrew Pivot - Remove Latch
Bolt and Reassemble It On
Opposite Side

C

Reassemble Spring Support
Assembly On Opposite Side
(Make Sure Spring Rides On
Latch Bolt Tail)

RHRB SHOWN

Identify Type of Installation
Identify type of installation to
determine location of vertical C
L
Single Door (Non-Fire Rated)

Door

For Standard strike Dim. “A” = 2-1/4"
For S04 strike Dim. “A” = 1-3/4"

Vertical reference line
(CL of chassis)

Double Door with 900 Mullion

Door

Double Doors With No Mullion
Vertical Centerline of Active Case

Door
DOOR

Standard Strike

Vertical reference
line (CL of chassis)

2-1/4"

2 of 6

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.

Use Strike S02

FM362 (05/15)

®

ED3200/ED3200A Series Rim Exit Device
ASSA ABLOY
A. Template
Vertical CL of Inactive Case
Horizontal CL
of Inactive Case
Holes

TE

MP
T3 LAT
12 E
06

Tape

Vertical CL of Active Case

38-5/8" Above
Finished Floor

TE

M
T3 PLA
12 TE
07

37-5/8" Above
Finished Floor
Lo

ca

te

Inside Face
of Door
Te
m

pla

tes

Th

is

Di

sta

nc

eA

pa

rt

1. Draw vertical centerline of active case based on types of
installation.
2. Measure 37-5/8" above finished floor and draw horizontal
line for active case template.
3. Align template (T31207) for active case with centerline
and tape.
4. Using crossbar hole centers for measuring, draw vertical
centerline of inactive case.

FM362 (05/15)

5. Measure 38-5/8" above finished floor and draw horizontal
line for inactive case template (1" higher than the active
case).
6. Align template (T31206) for inactive case with centerline
and tape.
7. Pin punch mounting holes for active and inactive cases
on door.
8. Drill and tap holes in door, per the template (T31207).

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.

3 of 6

®

ED3200/ED3200A Series Rim Exit Device
ASSA ABLOY
B. Active Case

1. Press in latchbolt and remove cover from active
case chassis.
2. Mount chassis to door as indicated in Figures 1
and 2.
3. Depress the chassis arm to confirm the latchbolt
retracts.

Active Case
Side
(Away from
Door Hinge)

Hinge
Side

Figure 1

Active Case Mounting Screws - Actual Size
Wood:
#10 x 1-1/4"
Phillips
Flat Head
(Total 4)

Active Case Mounting Screws - Actual Size
Metal:
#10-24 x 3/4"
Phillips Flat
Under Cut
(Total 4)

Chassis
Arm

Figure 2

C. Inactive Case

Inactive Case
Side
(Near Door
Hinge)

1. Remove cover.
2. Mount chassis to door as indicated in
Figures 3 and 4.

Hinge
Side

Figure 3

Inactive Case Mounting Screws - Actual Size
Wood:
#10 x 1-1/4"
Phillips
Flat Head
(Total 4)

Inactive Case Mounting Screws - Actual Size
Metal:
#10-24 x 3/4"
Phillips Flat
Under Cut
(Total 4)

4 of 6

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.

Figure 4

FM362 (05/15)

®

ED3200/ED3200A Series Rim Exit Device
ASSA ABLOY
D. Attach Outside Trim

1. Slide thrubolt screws thru inside chassis.
2. Thread cylinder into outside trim (if applicable).
3. Align outside trim with exposed
thrubolt screws and secure.

NOTE:
For Nightlatch function, secure cylinder to chassis.
This method allows cylinder to be removed at a later
date for rekeying without taking device off door.

Outside Trim Mounting Screws - Actual Size

Cylinder Mounting Screws - Actual Size

#10-24 x 2"
Phillips Oval
Head Machine
Screw
(Total 2)

1/4 -20 x
2-3/8" Phillips
Flat Head
(Total 2)

E. Covers

1. Attach covers to both chassis and secure.

Inactive Chassis

Active Chassis

Cover Mounting Screws - Actual Size
#8-32 x 7/32"
Phillips Oval
Head
(Total 8)

FM362 (05/15)

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.

5 of 6

®

ED3200/ED3200A Series Rim Exit Device
ASSA ABLOY
F. Crossbar

1. Slide crossbar into active chassis arm.
2. Slide crossbar into inactive chassis arm.
Arm

3. Insert plugs and secure to bar with locking
screws.
4. Depress the crossbar to confirm proper
operation.

Plug

5. Test for full latch retraction when dogged.
Crossbar Mounting Screws - Actual Size

Locking
Screw

Cross Bar

#10-24 x 3/4"
Socket Head
Cap Screw
(Total 2)

G. Strike
1. Align strike onto door frame and adjust for
proper position.
2. Center punch mounting holes.
3. Drill and tap holes in frame.
4. Secure strike in place.
5. Standing inside the room, close door and
confirm latchbolt fully engages.
Note: If latchbolt does not fully engage, review
installation measurements of active and inactive
chassis, and strike.

6 of 6

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.

FM362 (05/15)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 6
Create Date                     : 2015:05:12 15:51:10-04:00
Modify Date                     : 2015:05:12 15:51:10-04:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : Owner
Creator                         : CorelDRAW X6
Title                           : Untitled-1

EXIF Metadata provided by EXIF.tools