Corbin Russwin ED3200/ED3200A Series Rim Type Exit Device FM36205 15

ED3200/ED3200A Series Rim Type Exit Device CorbinFM362 Installation Instructions

User Manual: Corbin Russwin ED3200/ED3200A Series Rim Type Exit Device Wiring Diagrams and Instructions

Open the PDF directly: View PDF .
Page Count: 6

®

ASSA ABLOY

In U.S.:

Corbin Russwin, Inc.

225 Episcopal Road

Berlin, CT 06037 USA

www.corbinrusswin.com

In Canada:

ASSA ABLOY Door Security Solutions Canada

160 Four Valley Drive

Vaughan, Ontario, Canada L4K4T9

www.assaabloy.ca

Technical Product Support: Phone: 888-607-5703

Installation Instructions

1 of 6

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

ED3200/ED3200A Series

Rim Exit Device

FM362 (05/15)

FM362 (05/15)

Inactive Case

Cover

Hex Dogging Key

Active Case

Chassis

Active Case

Cover

Crossbar

Inactive Case

Chassis

Plug

Locking

Screw

Locking

Screw

LHR

Left Hand Reverse

Hinges Left

Open Outward

RHR

Right Hand Reverse

Hinges Right

Open Outward

Check Application For Proper Hand

And Function. If Required, Adjust Exit

Device As Follows:

Tools Required

1. Measuring tape

2. Power drill

3. Drill bits:

3/32",1/4",11/32", 3/8", #25

4. Taps:#10-24

5. Screwdrivers: Phillips #2 and #3

To view helpful video installation tips, scan the Microsoft® Tags with your

mobile phone. Download the free mobile app at http://getscanlife.com.

®

ASSA ABLOY

2 of 6 Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

ED3200/ED3200A Series Rim Exit Device

To Change Hand

AUnscrew Pivot and

Remove Spring

Support Assembly

Pivot

BUnscrew Pivot - Remove Latch

Bolt and Reassemble It On

Opposite Side

CReassemble Spring Support

Assembly On Opposite Side

(Make Sure Spring Rides On

Latch Bolt Tail)

RHRB SHOWN

FM362 (05/15)

Identify type of installation to

determine location of vertical C

L

Single Door (Non-Fire Rated)

Door

Vertical reference line

(C of chassis)

L

For Standard strike Dim. “A” = 2-1/4"

For S04 strike Dim. “A” = 1-3/4"

Double Door with 900 Mullion

Door Door

Vertical reference

line (C of chassis)

L

Standard Strike

Double Doors With No Mullion

Vertical Centerline of Active Case

2-1/4"

DOOR

Use Strike S02

Identify Type of Installation

®

ASSA ABLOY

ED3200/ED3200A Series Rim Exit Device

A. Template

38-5/8" Above

Finished Floor

1. Draw vertical centerline of active case based on types of

installation.

2. Measure 37-5/8" above finished floor and draw horizontal

line for active case template.

3. Align template (T31207) for active case with centerline

and tape.

4. Using crossbar hole centers for measuring, draw vertical

centerline of inactive case.

5. Measure 38-5/8" above finished floor and draw horizontal

line for inactive case template (1" higher than the active

case).

6. Align template (T31206) for inactive case with centerline

and tape.

7. Pin punch mounting holes for active and inactive cases

on door.

8. Drill and tap holes in door, per the template (T31207).

Tape

Horizontal C

of Inactive Case

Holes

L

L

L

Inside Face

of Door

Vertical C of Inactive Case

TEMPLATE

TEMPLATE

Locate Templates This Distance Apart

37-5/8" Above

Finished Floor

Vertical C of Active Case

T31206

T31207

3 of 6

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

FM362 (05/15)

ED3200/ED3200A Series Rim Exit Device

C. Inactive Case

1. Remove cover.

2. Mount chassis to door as indicated in

Figures 3 and 4.

1. Press in latchbolt and remove cover from active

case chassis.

2. Mount chassis to door as indicated in Figures 1

and 2.

3. Depress the chassis arm to confirm the latchbolt

retracts.

B. Active Case

Chassis

Arm Figure 2

Hinge

Side

Active Case

Side

(Away from

Door Hinge)

Figure 1

Figure 4

Figure 3

Hinge

Side

Inactive Case

Side

(Near Door

Hinge)

4 of 6 Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

Active Case Mounting Screws - Actual Size

Wood:

#10 x 1-1/4"

Phillips

Flat Head

(Total 4)

Metal:

#10-24 x 3/4"

Phillips Flat

Under Cut

(Total 4)

Active Case Mounting Screws - Actual Size

Inactive Case Mounting Screws - Actual Size

Metal:

#10-24 x 3/4"

Phillips Flat

Under Cut

(Total 4)

Inactive Case Mounting Screws - Actual Size

Wood:

#10 x 1-1/4"

Phillips

Flat Head

(Total 4)

FM362 (05/15)

®

ASSA ABLOY

ED3200/ED3200A Series Rim Exit Device

1. Slide thrubolt screws thru inside chassis.

2. Thread cylinder into outside trim (if applicable).

3. Align outside trim with exposed

thrubolt screws and secure.

D. Attach Outside Trim

NOTE:

For Nightlatch function, secure cylinder to chassis.

This method allows cylinder to be removed at a later

date for rekeying without taking device off door.

1/4 -20 x

2-3/8" Phillips

Flat Head

(Total 2)

Outside Trim Mounting Screws - Actual Size

#10-24 x 2"

Phillips Oval

Head Machine

Screw

(Total 2)

Cylinder Mounting Screws - Actual Size

5 of 6

Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

FM362 (05/15)

1. Attach covers to both chassis and secure.

E. Covers

Inactive Chassis Active Chassis

#8-32 x 7/32"

Phillips Oval

Head

(Total 8)

Cover Mounting Screws - Actual Size

®

ASSA ABLOY

ED3200/ED3200A Series Rim Exit Device

1. Slide crossbar into active chassis arm.

2. Slide crossbar into inactive chassis arm.

3. Insert plugs and secure to bar with locking

screws.

4. Depress the crossbar to confirm proper

operation.

5. Test for full latch retraction when dogged. Cross Bar

Arm

Plug

Locking

Screw

Crossbar Mounting Screws - Actual Size

#10-24 x 3/4"

Socket Head

Cap Screw

(Total 2)

FM362 (05/15)

6 of 6 Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.

All rights reserved. Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

F. Crossbar

G. Strike

1. Align strike onto door frame and adjust for

proper position.

2. Center punch mounting holes.

3. Drill and tap holes in frame.

4. Secure strike in place.

5. Standing inside the room, close door and

confirm latchbolt fully engages.

Note: If latchbolt does not fully engage, review

installation measurements of active and inactive

chassis, and strike.

®

ASSA ABLOY