Corbin Russwin ED3600 & ED3600A Series Mortise Exit Device FM36305 15
ED3600 & ED3600A Series Mortise Exit Device FM363 Installation Instructions
User Manual: Corbin Russwin ED3600 & ED3600A Series Mortise Exit Device Wiring Diagrams and Instructions
Open the PDF directly: View PDF 
.
Page Count: 5
| Download | |
| Open PDF In Browser | View PDF |
®
Installation Instructions
ED3600 & ED3600A Series
Mortise Exit Device
ASSA ABLOY
In U.S.:
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
www.corbinrusswin.com
In Canada:
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, Canada L4K4T9
www.assaabloy.ca
Technical Product Support: Phone: 888-607-5703
FM363 (05/15)
To view helpful video installation tips, scan the Microsoft® Tags with your
mobile phone. Download the free mobile app at http://getscanlife.com.
Inactive Case
Chassis
Inactive Case
Cover
Tools Required
1. Measuring tape
2. Power drill
3. Drill bits:
3/32",1/4",11/32", 3/8", #25
4. Taps:#10-24
5. Screwdrivers: Phillips #2 and #3
Dogging Key
Active Case
Chassis
Active Case
Cover
Plug
Locking
Screw
Mortise
Lock
Crossbar
Check Application For Proper Hand
And Function. If Required, Adjust Exit
Device As Follows:
LHR
Left Hand Reverse
Hinges Left
Open Outward
FM363 (05/15)
Locking
Screw
Plug
RHR
Right Hand Reverse
Hinges Right
Open Outward
Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
1 of 5
®
ED3600 & ED3600A Series Mortise Exit Device
ASSA ABLOY
A. Active Case Template
Vertical
CL of Inactive Case
Tape
Vertical CL of Active Case - "A"
TE
Horizontal CL
of Inactive Case
Holes
M
T3 PLA
12 TE
06
2-3/4"
38-5/8" Above
Finished Floor
TE
M
T3 PLA
12 TE
04
1. Measure 2-11/16" backset from center of door
edge and draw vertical centerline ("A").
43-1/8" Above
Finished Floor
2. Measure 43-1/8" above finished floor and draw
horizontal line for active case template.
3. Align template (T31204, LHR or T31205, RHR)
for active case with centerline and tape.
E
AT
PL
M
TE
Lo
Inside Face
of Door
ca
te
Te
m
4. Measure 38-5/8" above finished floor and draw
horizontal line for inactive case template.
pla
tes
Th
is
5. Using crossbar hole centers for measuring, draw
vertical centerline of inactive case.
Di
sta
nc
eA
pa
rt
6. Align template (T31206) for inactive case with
centerline and tape.
B. Mortise Lock
1. Slide lockbody into mortise pocket of door.
2. Fasten mortise lock in place.
Lock Mounting Screws - Actual Size
Lock Mounting Screws - Actual Size
Wood:
#12 x 1"
Phillips Flat
Head
(Total 2)
2 of 5
Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
Metal:
#12-24 x 1/2"
Phillips Flat
Under Cut
(Total 2)
FM363 (05/15)
®
ED3600 & ED3600A Series Mortise Exit Device
ASSA ABLOY
C. Active Case
4. Lift active case chassis upward until the latchbolt is
completely retracted.
1. Remove cover from active case chassis.
2. Depress arm and tighten with dogging key (provided)
until held in down position (See 2a-2b).
5. With chassis in this position, mark hole locations for the
top of the chassis.
3. Position active case chassis against door so that the
center case lever rests underneath the bottom of the
mortise lockbody (See 3).
6. Remove chassis from door then drill and tap top holes.
Active Case
Chassis
Dogging Key
Active Case
Cover
2b
Latchbolt
1
3
NOTE: Center case lever must
engage with rear lever of
lockbody for latchbolt to retract.
Center
Case
Lever
2a
7. Undog arm by loosening with dogging key (provided), until arm rotates freely.
8. Align chassis with holes on door.
9. Screw in top two holes of active case chassis and mount to door.
Dogging Key
Active Case
Chassis
10. Mark bottom hole locations on active case chassis.
11. Remove chassis from door.
12. Drill and tap bottom holes.
13. Position chassis on door and screw in top and bottom holes.
14. Verify latchbolt arm retracts.
Active Case Mounting Screws - Actual Size
Wood:
#10 x 1-1/4"
Phillips
Flat Head
(Total 4)
FM363 (05/15)
Active Case Mounting Screws - Actual Size
Metal:
#10-24 x 3/4"
Phillips Flat
Under Cut
(Total 4)
Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
3 of 5
®
ED3600 & ED3600A Series Mortise Exit Device
ASSA ABLOY
D. Inactive Case Template
Vertical
CL of Inactive Case
1. Center punch mounting holes for inactive case
on door.
2. Drill and tap holes in door.
Tape
TE
Horizontal CL
of Inactive Case
Holes
M
T3 PLA
12 TE
06
38-5/8" Above
Finished Floor
Inside Face
of Door
Lo
ca
te
Te
m
pla
tes
Th
is
Di
sta
nc
eA
pa
rt
E. Inactive Case
Inactive Chassis
1. Remove cover.
2. Mount chassis to door.
Active Case
Chassis
Inactive Case Mounting Screws - Actual Size
Wood:
#10 x 1-1/4"
Phillips
Flat Head
(Total 4)
Inactive Case Mounting Screws - Actual Size
Metal:
#10-24 x 3/4"
Phillips Flat
Under Cut
(Total 4)
4 of 5
Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
FM363 (05/15)
®
ED3600 & ED3600A Series Mortise Exit Device
ASSA ABLOY
F. Attach Outside Trim
1. Slide thrubolt screws thru inside chassis and door.
Cylinder
Set
Screw
2. Install cylinder (if applicable).
3. Align outside trim with exposed thrubolt screws and
secure.
Cylinder
4. Tighten cylinder set screw (if applicable).
Outside Trim Mounting Screws - Actual Size
1/4 -20 x
2-3/8" Phillips
Flat Head
(Total 2)
G. Covers
1. Attach covers to both chassis and secure .
Inactive Chassis
Active Chassis
Cover Mounting Screws - Actual Size
#8-32 x 7/32"
Phillips Oval
Head
(Total 8)
H. Crossbar
1. Slide crossbar into active chassis arm.
Arm
2. Slide crossbar into inactive chassis arm.
3. Insert plugs and secure to bar with locking screws.
Plug
4. Depress the crossbar to confirm the latchbolt retracts.
Crossbar Mounting Screws - Actual Size
Locking
Screw
Cross Bar
#10-24 x 3/4"
Socket Head
Cap Screw
(Total 2)
FM363 (05/15)
Copyright © 2015 Corbin Russwin Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
5 of 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 5 Create Date : 2015:05:12 14:55:06-04:00 Modify Date : 2015:05:12 14:55:06-04:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Owner Creator : CorelDRAW X6 Title : Untitled-1EXIF Metadata provided by EXIF.tools