Corbin Russwin ED5000 Series Aadss1004819

User Manual: Corbin Russwin ED5000 Series Catalog

Open the PDF directly: View PDF .
Page Count: 64

Download
Open PDF In Browser	View PDF

ED5000 Series
Pushpad Exit Devices

Overview
ED5000
Applications
Corbin Russwin’s history is rich with architectural hardware designed to meet life
safety and security requirements. That tradition continues with ED5000 Series exit
devices. Designed to allow safe and easy egress, the ED5000 is ideal for frequent use
applications such as schools, factories, hotels, theaters, office, retail complexes and
government buildings.

Quality
All exit devices manufactured by Corbin Russwin undergo rigorous testing, both in
the lab and field. Testing procedures go beyond industry standards; the ED5800
concealed vertical rod exit device was witnessed and certified to 3.25 million
successful cycles, more than 6 times the requirement. Abuse and cycle tests prove
time and again the durability of the entire ED5000 series, which is backed by a 5-year
warranty.

Aesthetics
Over the past 100 years, Corbin Russwin has been well-known for weaving pleasing
aesthetics and inventive designs into architectural door hardware, and today’s wide
stile exit device line is no exception. The ED5000 Series offers smooth lines in the exit
device bar and a full range of trim designs with visual diversity, including the Muséo®
and Vineyard™ Collections.

Vandal Resistance
Today’s door hardware must fulfill life-safety and security needs, two areas in which
ED5000 series exit devices and trim excel. The ED5200S SecureBolt® features a
deadbolt style latchbolt that significantly resists pull from the exterior, thus reducing
door and frame separation, preventing the door from being forced open. 900
series heavy-duty trim deters vandals with a thick 13/16" beveled escutcheon, Free
Wheeling lever (excluding mortise trim), and flush cylinder. High security Pyramid
cylinders offer an additional barrier against picking and drilling. These components
can all be combined for high quality, high security applications.

Electronics
If electronic access control is required, or just a simple monitoring switch, the ED5000
series offers a full range of electrified options, including a delayed egress exit device
and electrically controlled trim. All options can be tied into existing security and fire
alarm systems for easy monitoring.

ED5000.2
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Product Series Features
ED5000
As Corbin Russwin continues to offer the latest technology and architectural hardware, an additional option is also presented to
architects, distributors, and end-users. The power of choice. With a wide variety of devices, trims, lever designs, and electrified
hardware, a locking system can be designed for any building and any application. Below are some highlights of the ED5000 Series.
These are but a few of the options that can be combined to meet the aesthetic and security requirements of today.

SecureBolt® Delayed
Egress Exit Device

SecureBolt®

Delayed Egress Exit Device

• Deadbolt-style latch design provides
increased security by resisting unauthorized
entrance from credit cards, crowbars, door
rattling, etc.

• Increases security in many applications such
as retail stores and health care facilities

• Is more resistant to vector forces, which
results in less force against the frame, thus
eliminating door/frame separation

• 15 or 30-second delay available

• Features an LED indicator and a nuisance
delay
• UL and BHMA listed

• Provides increased stability of openings
with mullions

Photoluminescent Touchpad Cover

• Fire resistant and non-radioactive

The PathLite™ patent pending technology
offers a number of benefits:

• Green contrasting word “EXIT” centered on
touchbar in 1-1/4" high lettering

• Requires no wiring or maintenance

• Cost effective; especially suited for existing
buildings

• Recharges with exposure to ambient light
• Unaffected by heat or cold
• Non-toxic, will not rub or fade
• Vandal resistant

PathLite™ photoluminescent exit devices meet
New York City’s newly adopted standards for
requirement of photoluminescent signage
and stairwell markings in all office buildings in
excess of 75 feet in height.

Heavy-Duty Trim
Heavy-Duty
Trim with
Vineyard lever

• Free Wheeling levers for vandal resistance (excluding mortise trim)
• Heavy-duty threaded posts provide additional strength
• Beveled sides for increased attack resistance
• Flush cylinder when used with 6-pin applications and mortise trim functions

Heavy-Duty Trim
with Muséo® lever

Muséo® and Vineyard™ Collections
• Available in 605, 606, 611, 612, 613, 613E, 618, 619, 625, 626, 722 finishes
• Allows for design continuum when matched with the ML2000 series mortise lock Muséo and
Vineyard Collection trims
• Heavy-duty vandal-resistant escutcheon increases security
Parabolic Trim with Vineyard™ Lever

Parabolic Trim with
Vineyard™ lever
Specify M60

• Specify M60

ED5000.3
45063-8/15

Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

Applications and Listings
ED5000

UL Listing

Maximum
Opening
(W x H)

ED5200

Panic

4' x *

ED5200A

3 Hr.

4' x 8'

ED5200S

Panic

4' x *

ED5200SA

3 Hr.

4' x 8'

ED5200S x M107

Panic

4' x 8'

ED5200SA x M107

3 Hr.

4' x 8'

Panic

4' x *

ED5600A

1-1/2 Hr.

4' x 9'

ED5600A

3 Hr.

4' x 8'

Single Door

Application

Rim
Surface applied; single-point latching.

SecureBolt®
Surface applied; single-point latching.
Surface applied; single-point latching.
Used as components in swinging door
windstorm-rated assemblies (refer to local
codes).

Mortise
ED5600

Mortised in door; single-point latching.

Surface Vertical Rod
ED5400

Panic

4' x 8'

ED5470

Panic

4' x 10'

ED5470 x M55

Panic

4' x 10'

Surface applied; one-point latching.

4' x 8'

Surface applied; two-point latching.
Used as components in swinging door
windstorm-rated assemblies (refer to local
codes).

ED5470 x M107

Panic

Surface applied; two-point latching.

Concealed Vertical Rod
ED5800

Panic

4' x 8'

ED5860

Panic

4' x 10'

Rods concealed in door; two-point
latching.

ED5860 x M55

Panic

4' x 10'

Rod concealed in door; one point latching.

UL Listing

Maximum
Opening
(W x H)

Application

ED5200 x ED5200 x 900 Series

Panic

8' x 10'

ED5200A x ED5200A x 900 Series

3 Hr.

8' x 8'

ED5200S x ED5200S x 900 Series

Panic

8' x 10'

ED5200SA x ED5200SA x 900 Series

3 Hr.

8' x 8'

ED5200S x ED5200S x M107

Panic

8' x 8'

ED5200SA x ED5200SA x M107

3 Hr.

8' x 8'

Pair of Doors with
Removable Mullion
Rim x Rim

Two independent active doors with
removable mullion.

SecureBolt® x SecureBolt®
Two independent active doors with
removable mullion.
Two independent active doors with
removable mullion. Used as components in
swinging door windstorm-rated assemblies
(refer to local codes).

*UL does not set a door height limitation on panic applications.

ED5000.4
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Applications and Listings
ED5000
Pairs of Doors

UL Listing

Maximum
Opening
(W x H)

Application

Surface Vertical Rod

ED5400 x ED5400

Panic

8' x 8'

ED5400A x ED5400A

3 Hr.

8' x 8'

ED5470 x ED5470

Panic

8' x 10'

ED5470B x ED5470B

1-1/2 Hr.

8' x 10'

ED5470 x ED5470 x M107

Panic

8' x 8'

ED5470B x ED5470B x M107

1-1/2 Hr.

8' x 8'

Two independent doors with two-point
latching, swinging in the same direction.
Two independent doors with one or twopoint latching, swinging in the same direction.
Two independent doors with two-point
latching, swinging in opposite directions. Used
as components in swinging door windstormrated assemblies (refer to local codes).

Surface Vertical Rod (Double Egress)

ED5400 x ED5400

Panic

8' x 8'

ED5400A x ED5400A

3 Hr.

8' x 8'

ED5470 x ED5470

Panic

8' x 10'

ED5470B x ED5470B

1-1/2 Hr.

8' x 10'

Two independent doors with two-point
latching, swinging in opposite directions.
Overlapping astragal required for 3-hour
openings.
Two independent doors with one or
two-point latching, swinging in opposite
directions. Overlapping astragal not required.

Surface Vertical Rod x Mortise

ED5400 x ED5600

Panic

8' x 8'

ED5400A x ED5600A

3 Hr.

8' x 8'

ED5400A x ED5600A x Open Back Strike

1-1/2 Hr.

8' x 8'

ED5470 x ED5600

Panic

8' x 10'

ED5470B x ED5600A

1-1/2 Hr.

8' x 9'

Overlapping astragal required for 3-hour
openings. Coordinator required with standard
ANSI strike.
Overlapping astragal required for fire-rated
openings. Coordinator required with standard
ANSI strike.

Concealed Vertical Rod

ED5800 x ED5600

Panic

8' x 8'

ED5800 x ED5800

Panic

8' x 8'

ED5800A x ED5600A

3 Hr.

8' x 8'

ED5800A x ED5800A

3 Hr.

8' x 8'

ED5800A x ED5600A x Open Back Strike

1-1/2 Hr.

8' x 8'

ED5860 x ED5600

Panic

8' x 10'

ED5860 x ED5860

Panic

8' x 10'

ED5860B x ED5600A

1-1/2 Hr.

8' x 10'

ED5860B x ED5860B

1-1/2 Hr.

8' x 10'

Two independent metal doors with two-point
latching, swinging in the same direction.

Two independent metal or wood doors with
one or two-point latching, swinging in the
same direction.

Concealed Vertical Rod (Double Egress)

ED5800 x ED5800

Panic

8' x 8'

ED5800A x ED5800A

3 Hr.

8' x 8'

ED5860 x ED5860

Panic

8' x 10'

ED5860B x ED5860B

1-1/2 Hr.

8' x 10'

Two independent metal doors with two-point
latching, swinging in opposite directions.
Overlapping astragal required for 3-hour
openings.
Two independent metal or wood doors
with one or two-point latching, swinging in
opposite directions. Overlapping astragal not
required.

*UL does not set a door height limitation on panic applications.

ED5000.5
45063-8/15

SecureBolt® Features
ED5000
ED5200S
ED5200SA
ED5202S
ED5202SA

Panic-Listed SecureBolt® Exit Device
3-Hour Fire-Listed SecureBolt® Exit Device
Panic-Listed Listed SecureBolt® Double Cylinder Exit Device
3-Hour Fire-Listed SecureBolt® Double Cylinder Exit Device

Features
Handing
Standard device is non-handed.
Double Cylinder Device is handed.
Lever trim is handed.
Bar Length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"-48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (114mm).
Latchbolt
Full 3/4" (19mm) projection, 1" (25mm) wide,
positive deadlocking by auxiliary bolt.

Fasteners
Standard on panic devices: machine screws and
wood door fasteners.
Standard on fire-rated devices: sex nuts and
bolts.
Optional on devices: sex nuts and bolts for
use on wood, composite or unreinforced
metal doors; specify M54.
Optional wood screws for use on approved
fire-rated solid wood or wood core doors.
Specify M64.
Strike
Surface mounted 3/8"
(10mm) diameter roller
strike, complete with
positive locking plate
and shims, assuring low
friction relocking for a
long, trouble-free life.
Functions and Trims
Through-bolted
Roller Strike
lever, knob, pull and
thumbpiece trims available with wide range
of functions; see Trims and Functions, pages
20-25.
Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.

Cut Away Side View
Materials
Latchbolt: Nickel steel. Slide-action deadbolt
with positive deadlocking by auxiliary bolt. Twopiece deadbolt mechanism utilizing a roll back
lever which eliminates any contact (friction)
with the strike during relocking.
Device: Heavy duty cold forged steel chassis;
heavy gauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm) dogged.
Dogging
Standard on panic-rated devices; single-point
1/4 turn hex key dogging.
Optional: less dogging, specify M51.
Optional: cylinder dogging; specify M52.
Optional: electric dogging; specify M97.
Mechanical dogging not available on firerated devices.

ED5000.6

Any retrofit or other field modification to a
fire-rated opening can potentially impact the
fire rating of the opening, and Corbin Russwin,
Inc. makes no representations or warranties
concerning what such impact may be in any
specific situation. When retrofitting any portion
of an existing fire-rated opening, or specifying
and installing a new fire-rated opening, please
consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and
ratings.
California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to
section 13144.1 of the California Health and
Safety Code.
NFPA
All exit devices comply with NFPA 101 Life
Safety Code. All fire-rated devices comply with
NFPA 80 Fire Doors and Windows.
ADA
Exit devices, lever trims and pulls comply with
Americans with Disabilities Act.

Finishes
BHMA 605
BHMA 606

Bright Brass
Satin Brass

Removable Mullion
See Mullions, page 47.

BHMA 611

Bright Bronze

BHMA 612

Satin Bronze

Shim Kit
Optional for mounting device over raised vision
light molding; specify M58.

BHMA 613

Applications and Listings
See page 4.

613E

Oxidized Bronze, oil rubbed,
available lacquered
Dark Oxidized Satin Bronze
Equivalent

BHMA 618

Bright Nickel Plated

Warranty
Five-year limited.

BHMA 619

Satin Nickel Plated

BHMA 625

Bright Chromium Plated

Certification/Compliance

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

BHMA 629

Bright Stainless Steel

BHMA 630

Satin Stainless Steel

ANSI
Meets A156.3, Type 28, Grade 1.
Meets A117.1 Accessibility Code.
UL /cUL
All devices listed for safety as panic hardware;
devices comply with UL 305 standards for panic
hardware. Three-hour fire-rated devices listed
as fire exit hardware for A label and lesser class
4' x 8' single or 8' x 8' double doors; UL symbol
on active case cover indicates listing.

Satin Stainless Steel
with MicroShield®
Black oxidized bronze,oil
BHMA 722
rubbed
*Contact factory for devices required in
BHMA 626
630C

45063-8/15

SecureBolt® Features
ED5000
ED5200S and ED5200SA
SecureBolt Exit Devices
®

Architecturally finished brass,
bronze or stainless steel

Wrought brass or
bronze rear cover
Low profile; no pinch points,
closed on all sides

Heavy-duty chassis

3/4" (19mm) projection x 1"
wide deadbolt- style latchbolt
with positive deadlocking by
auxiliary bolt

Single point, 1/4 turn hex key
dogging
(ED5200S Series Panic Devices)

ED5202S(A)
SecureBolt® Double
Cylinder Exit Devices

In terms of an exit device, vector forces mean that pressure
applied to the door results in a force against the stop and
the frame, resulting in door/frame separation. The standard
pullman latchbolt applies 280 pounds of force against the
frame from a 400- pound pull on the door.
The SecureBolt® exit device only applies 63 pounds of force
against the frame from a 400-pound pull on the door. Less
force means the door and frame do not separate, providing a
higher level of security, as the door cannot be pulled open.

ED5000.7
45063-8/15

Rim Features
ED5000
ED5200
ED5200A
ED5202
ED5202A

Panic-Listed Rim Exit Device
3-Hour Fire-Listed Rim Exit Device
Panic-Listed Listed Rim Double Cylinder Exit Device
3-Hour Fire-Listed Rim Double Cylinder Exit Device

Features
Handing
Standard device is non-handed.
Double Cylinder Device is Handed.
Lever trim is handed.
Bar Length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"-48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (114mm).
Latchbolt
3/4" (19mm) throw, stainless steel pullmantype with stainless steel deadlocking latch.
Materials
Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm) dogged.
Dogging
Standard on panic devices; single-point 1/4
turn hex key dogging.
Optional: less dogging, specify M51.
Optional: cylinder dogging; specify M52.
Optional: electric dogging; specify M97.
Mechanical dogging not available on firerated devices.
Fasteners
Standard on panic devices: machine screws
and wood door fasteners. Standard on firerated devices: sex nuts and bolts. Optional
on panic devices: sex nuts and bolts for use
on wood, composite, or unreinforced metal
doors; specify M54. Optional wood screws for
use on approved fire-rated solid wood or wood
core doors. Specify M64.

Strike
Surface-mounted 3/8" (10mm) diameter roller
strike, complete with positive locking plate and
shims, assuring low friction relocking for a long,
trouble-free life.

California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to
section 13144.1 of the California Health and
Safety Code.

Functions and Trims
Through-bolted lever, knob, pull and
thumbpiece trims available with wide range
of functions; see Trims and Functions, pages
20-25.

NFPA
All exit devices comply with NFPA 101 Life
Safety Code. All fire-rated devices comply
with NFPA 80 Fire Doors and Windows.

Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.
Removable Mullion
See Mullions, page 47.
Shim Kit
Optional for mounting device over raised vision
light molding; specify M58.
Applications and Listings
See page 4.
Warranty
Five-year limited.

ADA
Exit devices, lever trims and pulls comply
with Americans with Disabilities Act.
Finishes
BHMA 605
BHMA 606

Bright Brass
Satin Brass

BHMA 611

Bright Bronze

BHMA 612

Satin Bronze

BHMA 613
613E

Oxidized Bronze, oil rubbed,
available lacquered
Dark Oxidized Satin Bronze
Equivalent

BHMA 618

Bright Nickel Plated

Certification/Compliance

BHMA 619

Satin Nickel Plated

ANSI
Meets A156.3, Type 1, Grade 1.
Meets A117.1 Accessibility Code.

BHMA 625

Bright Chromium Plated

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

BHMA 629

Bright Stainless Steel

BHMA 630

Satin Stainless Steel

Satin Stainless Steel
with MicroShield®
Black oxidized bronze,oil
BHMA 722
rubbed
*Contact factory for devices required in
BHMA 626
630C

ratings.

ED5000.8
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Rim Features
ED5000
ED5200 and ED5200A
Rim Exit Devices

Architecturally finished brass,
bronze or stainless steel
Wrought brass or
bronze rear cover

Heavy-duty chassis

Low profile; no pinch points —
closed on all sides

Single point, 1/4 turn hex key
dogging
(ED5200 Series Panic Devices)

3/4" (19mm) throw stainless
steel pullman-type latchbolt
with stainless steel auxiliary
deadlocking latch standard
ED5202(A) Rim
Double Cylinder
Exit Devices

ED5000.9
45063-8/15

Surface Vertical Rod Features
ED5000
ED5400
ED5400A

Panic-Listed Surface Vertical Rod Exit Device
3-Hour Fire-Listed Surface Vertical Rod Exit Device

Features
Handing
Device is handed but easily field reversible.
Lever trim is handed.
Bar Length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"-48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (114mm).
Door Height
Standard top rod for 7' door.
All rods easily field cut to size.
Optional door heights up to 8’ available; see
Quick Codes, page 54.
For door heights above 8’0” refer to
ED5470(B).
Latchbolt
Top: 3/4" (19mm) throw, stainless steel
pullman-type with automatic deadlatching.
Bottom: 5/8" (16mm) throw deadbolt, held
retracted during door swing.
Vertical Rods
1/2" O.D. tubular brass, bronze or stainless
steel with rod guides.
Materials
Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm) dogged.
Dogging
Standard on panic devices; single-point 1/4
turn hex key dogging. Optional: less dogging,
specify M51. Optional: cylinder dogging,
specify M52. Optional: electric dogging;
specify M97. Mechanical dogging not
available on fire-rated devices.

Fasteners
Standard on panic devices: machine screws
and wood door fasteners.
Standard on fire-rated devices: sex nuts and
bolts.
Optional on panic devices: sex nuts and bolts
for use on wood, composite, or unreinforced
metal doors; specify M54.
Optional wood screws for use on approved
fire-rated solid wood or wood core doors.
Specify M64.
Strike
Top: adjustable roller strike with positive locking
plate and shims.
Bottom: flush mounted.
Optional strikes available; see Options and
Accessories, page 50.
Functions and Trims
Through-bolted lever, knob pull and
thumbpiece trims available with wide range
of functions; see Trims and Functions, pages
20-25.
Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.
Shim Kit
Optional for mounting device over raised vision
light molding; specify M58.

concerning what such impact may be in any
specific situation. When retrofitting any portion
of an existing fire rated opening, or specifying
and installing a new fire-rated opening, please
consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and
ratings.
California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to section
13144.1 of the California Health and Safety
Code.
NFPA
All exit devices comply with NFPA 101 Life
Safety Code. All fire-rated devices comply with
NFPA 80 Fire Doors and Windows.
ADA
Lever trims and pulls comply with Americans
with Disabilities Act.

Finishes
BHMA 605
BHMA 606

Bright Brass
Satin Brass

BHMA 611

Bright Bronze

BHMA 612

Satin Bronze

Applications and Listings
See page 4.

BHMA 613

Warranty
Five-year limited.

613E

Certification/Compliance
ANSI
Meets A156.3, Type 2, Grade 1.
UL /cUL
All devices listed for safety as panic hardware;
devices comply with UL 305 standards for panic
hardware. Three-hour fire-rated devices listed
as fire exit hardware for A label and lesser class
8’ x 8’ double doors; UL symbol on active case
cover indicates listing.
Any retrofit or other field modification to a
fire- rated opening can potentially impact the
fire rating of the opening, and Corbin Russwin,
Inc. makes no representations or warranties

Oxidized Bronze, oil rubbed,
available lacquered
Dark Oxidized Satin Bronze
Equivalent

BHMA 618

Bright Nickel Plated

BHMA 619

Satin Nickel Plated

BHMA 625

Bright Chromium Plated

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

BHMA 629

Bright Stainless Steel

BHMA 630

Satin Stainless Steel

Satin Stainless Steel
with MicroShield®
Black oxidized bronze,oil
BHMA 722
rubbed
*Contact factory for devices required in
BHMA 626
630C

ED5000.10
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Surface Vertical Rod Features
ED5000
ED5400 and ED5400A Surface
Vertical Rod Exit Device
3/4" (19mm) throw deadlocking
stainless steel latchbolt

Architecturally finished brass,
bronze or stainless steel
Low profile; no pinch
points – closed on all
sides

Wrought brass or
bronze rear cover

Heavy-duty chassis

Single point 1/4 turn hex key
dogging
(ED5400 Series Panic Devices)

5/8" (16mm) throw
bottom deadbolt

ED5000.11
45063-8/15

Surface Vertical Rod Features
ED5000
ED5470 Panic-Listed Surface Vertical Rod Exit Device
ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device
Features
Handing
Device is handed but easily field reversible.
Lever trim is handed.
Bar length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"- 48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (14mm).
Door Height
Standard top rod for 7' door.
All top rods easily field cut to size.
Optional door heights up to 10’ available; see
Quick Codes, page 54.
Latchbolt
Top: 3/4" (19mm) throw, stainless steel,
pullman-type with automatic deadlatching.
Bottom: 5/8" (16mm) throw deadbolt, held
retracted during door swing.
Vertical Rods
1/2" O.D. tubular brass, bronze or stainless
steel with rod guides.
Less Bottom Rod
Optional on ED5470 & ED5470B devices
only; specify M55.
Heat Activated Door Bolt (Popper)
Standard on all fire-rated devices with M55
option (less bottom rod).
Materials
Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm)
dogged.

Dogging
Standard on panic devices; single-point 1/4
turn hex key dogging. Optional: less dogging,
specify M51. Optional: cylinder dogging,
specify M52. Optional: electric dogging;
specify M97. Mechanical dogging not
available on fire-rated devices.
Fasteners
Standard on panic devices: machine screws
and wood door fasteners. Standard on firerated devices: sex nuts and bolts. Optional
on panic devices: sex nuts and bolts for use
on wood, composite, or unreinforced metal
doors; specify M54. Optional wood screws
for use on approved fire-rated solid wood or
wood core doors. Specify M64.
Strike
Top: surface mounted interlocking.
Bottom: flush mounted.
Optional strikes available; see Options and
Accessories, page 50.
Functions and Trims
Through-bolted lever, knob, pull and
thumbpiece trims available with wide range
of functions; see Trims and Functions, pages
20-25.

Any retrofit or other field modification to a fire
rated opening can potentially impact the fire
rating of the opening, and Corbin Russwin,
Inc. makes no representations or warranties
concerning what such impact may be in any
specific situation. When retrofitting any portion
of an existing fire rated opening, or specifying
and installing a new fire-rated opening, please
consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and
ratings.
California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to section
13144.1 of the California Health and Safety
Code.
NFPA
All exit devices comply with NFPA 101 Life
Safety Code.
All fire-rated devices comply with NFPA 80
Fire Doors and Windows.
ADA
Exit devices with M55 option, lever trims and pulls
comply with Americans with Disabilities Act.

Finishes

Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.

BHMA 605
BHMA 606

Bright Brass
Satin Brass

BHMA 611

Bright Bronze

Shim Kit
Optional for mounting device over raised
vision light molding; specify M58.

BHMA 612

Satin Bronze

Applications and Listings
See page 4.
Warranty
Five-year limited.

BHMA 613
613E

Oxidized Bronze, oil rubbed,
available lacquered
Dark Oxidized Satin Bronze
Equivalent

BHMA 618

Bright Nickel Plated

BHMA 619

Satin Nickel Plated

BHMA 625

Bright Chromium Plated

ANSI
Meets A156.3, Type 2, Grade 1.
Meets A117.1 Accessibility Code when
ordered with M55 option only.

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

UL/cUL
All devices listed for safety as panic hardware;
devices comply with UL 305 standards for
panic hardware. 1-1/2 hour fire-rated devices
listed as fire exit hardware for B label and lesser
class 8’ x 10’ double doors; UL symbol on
active case cover indicates listings.

BHMA 629

Bright Stainless Steel

BHMA 630

Satin Stainless Steel

Certification/Compliance

Satin Stainless Steel
with MicroShield®
Black oxidized bronze,oil
BHMA 722
rubbed
*Contact factory for devices required in
BHMA 626
630C

ED5000.12
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Surface Vertical Rod Features
ED5000
ED5470 and ED5470B
Surface Vertical Rod
Exit Devices

Heat-activated door bolt
(Popper) – Used when bottom
rod is omitted from fire exit
devices (M55).

3/4" (19mm) throw deadlocking
stainless steel latchbolt

ED5470B
M55 (Less Bottom Rod)

Architecturally finished brass,
bronze or stainless steel

Low profile; no pinch
points – closed on all
sides

Wrought brass or
bronze rear cover

Heavy-duty chassis

Single point 1/4 turn hex key dogging
(ED5470 Series Panic Devices)

5/8" (16mm) throw
deadbolt
45063-8/15

ED5000.13

Concealed Vertical Rod Features
ED5000
ED5800 Panic-Listed Concealed Vertical Rod Exit Device
ED5800A 3-Hour Fire-Listed Concealed Vertical Rod Exit Device
For use with metal doors only
Features
Handing
Device is handed but easily field reversible.
Lever trim is handed.
Bar length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"-48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (114mm).
Door Height
Standard: top rod for 8' door.
Telescoping rod assembly to accommodate
various door heights. For door heights above
8’0”, refer to ED5860(B).
Latchbolt
Top: 3/4" (19mm) throw, stainless steel
pullman-type with automatic deadlatching.
Bottom: 5/8" (16mm) throw deadbolt, held
retracted during door swing.
Vertical Rods
1/2" O.D. tubing, electroplated for corrosion
resistance.
Materials
Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm)
dogged.
Dogging
Standard on panic devices; single-point 1/4
turn hex key dogging. Optional: less dogging,
specify M51. Optional: cylinder dogging,
specify M52. Optional: electric dogging;
specify M97. Mechanical dogging not
available on fire-rated devices.

Fasteners
Standard on panic devices: machine screws.
Standard on fire-rated devices: sex nuts and
bolts.
Optional on panic devices: sex nuts and bolts
for use on unreinforced metal doors; specify
M54.
Strike
Top: roller type.
Bottom: flush mounted.
Optional strikes available; see Options and
Accessories, page 50.
Functions and Trims
Through-bolted lever, knob, pull and
thumbpiece trims available with wide range
of functions; see Trims and Functions, pages
20-25.
Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.
Shim Kit
Optional for mounting device over raised
vision light molding; specify M58.

consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and
ratings.
California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to section
13144.1 of the California Health and Safety
Code.
NFPA
All exit devices comply with NFPA 101 Life
Safety Code.
All fire-rated devices comply with NFPA 80
Fire Doors and Windows.
ADA
Exit devices, lever trims and pulls comply with
Americans with Disabilities Act.

Finishes
BHMA 605
BHMA 606

Bright Brass
Satin Brass

Applications and Listings
For use on metal doors only. See page 4.

BHMA 611

Bright Bronze

BHMA 612

Satin Bronze

Warranty
Five-year limited.

BHMA 613
613E

Oxidized Bronze, oil rubbed,
available lacquered
Dark Oxidized Satin Bronze
Equivalent

Certification/Compliance

BHMA 618

Bright Nickel Plated

ANSI
Meets A156.3, Type 8, Grade 1.
Meets A117.1 Accessibility Code.

BHMA 619

Satin Nickel Plated

BHMA 625

Bright Chromium Plated

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

BHMA 629

Bright Stainless Steel

BHMA 630

Satin Stainless Steel

UL/cUL
All devices listed for safety as panic hardware;
devices comply with UL 305 standards for panic
hardware. Three-hour fire-rated devices listed
as fire exit hardware for A label and lesser class
8' x 8' double doors; UL symbol on active case
cover indicates listing.
Any retrofit or other field modification to a fire
rated opening can potentially impact the fire
rating of the opening, and Corbin Russwin,
Inc. makes no representations or warranties
concerning what such impact may be in any
specific situation. When retrofitting any portion
of an existing fire rated opening, or specifying
and installing a new fire-rated opening, please

Satin Stainless Steel
with MicroShield®
Black oxidized bronze,oil
BHMA 722
rubbed
*Contact factory for devices required in
BHMA 626
630C

ED5000.14
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Concealed Vertical Rod Features
ED5000
ED5800 and ED5800A Concealed Vertical Rod Exit Devices
For use with metal doors only

3/4" (19mm) throw deadlocking
stainless steel latchbolt

Architecturally finished brass,
bronze or stainless steel

Wrought brass or
bronze rear cover

Low profile; no pinch points –
closed on all sides
Heavy-duty chassis

Single point 1/4 turn hex key dogging
(ED5800 Series Panic Devices)

5/8" (16mm) throw
bottom deadbolt

ED5000.15
45063-8/15

Concealed Vertical Rod Features
ED5000
ED5860 Panic-Listed Concealed Vertical Rod Exit Device
ED5860B 1-1/2 Hour Fire-Listed Concealed Vertical Rod Exit Device
For use with metal or wood doors
Features
Handing
Device is handed but is easily field reversible.
Lever trim is handed.
Bar length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"-48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (14mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (114mm).
Door Height
Standard: top rod for 8' door.
Telescoping rod assembly to accommodate
various door heights.
Optional door heights up to 10' available; see
Quick Codes, page 54.
Latchbolt
Top: 3/4" (19mm) throw, stainless steel,
pullman-type with automatic deadlatching.
Bottom: 5/8" (16mm) throw deadbolt, held
retracted during door swing.
Vertical Rods
1/2" O.D. tubing, electroplated for corrosion
resistance.
Less Bottom Rod
Optional on ED5860 and ED5860B devices
only; specify M55.
Heat-Activated Door Bolt (Popper)
Standard with all fire-rated devices with M55
option (less bottom rod).
Materials
Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm)
dogged.

ED5000.16

Dogging
Standard on panic devices; single-point 1/4
turn hex key dogging.
Optional: less dogging, specify M51.
Optional: cylinder dogging, specify M52.
Optional: electric dogging; specify M97.
Mechanical dogging not available on firerated devices.
Fasteners
Standard on panic devices: machine screws
and wood door fasteners.
Standard on fire-rated devices: sex nuts and
bolts.
Optional on panic devices: sex nuts and bolts
for use on wood, composite, or unreinforced
metal doors; specify M54.
Optional wood screws for use on approved
fire-rated solid wood or wood core doors.
Specify M64.
Strike
Top: mortise. Bottom: flush mounted.
Optional strikes available; see Options and
Accessories, page 50.
Functions and Trims
Through-bolted lever, knob, pull and
thumbpiece trims available with wide
range of functions; see Trims and
Functions, pages 20-25.
Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.
Shim Kit
Optional for mounting device over raised
vision light molding; specify M58.
Applications and Listings
For use with metal or wood doors. See page 4.
Warranty
Five-year limited.

Certification/Compliance
ANSI
Meets A156.3, Type 7 and 8, Grade 1.
Meets A117.1 Accessibility Code.
UL/cUL
All devices listed for safety as panic hardware;
devices comply with UL 305 standards for
panic hardware. 1-1/2 hour fire-rated devices
listed as fire exit hardware for B label and lesser
class 8' x 10' double doors; UL symbol on
active case cover indicates listings.

Any retrofit or other field modification to a fire
rated opening can potentially impact the fire
rating of the opening, and Corbin Russwin,
Inc. makes no representations or warranties
concerning what such impact may be in any
specific situation. When retrofitting any portion
of an existing fire rated opening, or specifying
and installing a new fire-rated opening, please
consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and
ratings.
California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to section
13144.1 of the California Health and Safety
Code.
NFPA
All exit devices comply with NFPA 101 Life
Safety Code.
All fire-rated devices comply with NFPA 80
Fire Doors and Windows.
ADA
Exit devices, lever trims and pulls comply with
Americans with Disabilities Act.

Finishes
BHMA 605
BHMA 606

Bright Brass
Satin Brass

BHMA 611

Bright Bronze

BHMA 612

Satin Bronze

BHMA 613
613E

Oxidized Bronze, oil rubbed,
available lacquered
Dark Oxidized Satin Bronze
Equivalent

BHMA 618

Bright Nickel Plated

BHMA 619

Satin Nickel Plated

BHMA 625

Bright Chromium Plated

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

BHMA 629

Bright Stainless Steel

BHMA 630

Satin Stainless Steel

Satin Stainless Steel
with MicroShield®
Black oxidized bronze,oil
BHMA 722
rubbed
*Contact factory for devices required in
BHMA 626
630C

45063-8/15

Concealed Vertical Rod Features
ED5000
ED5860 and ED5860B
Concealed Vertical
Rod Exit Devices

Heat-activated door bolt
(Popper) – Used when bottom
rod is omitted from fire exit
devices (M55).

For use with metal or
wood doors
3/4" (19mm) throw deadlocking
stainless steel latchbolt

ED5860B
M55 (Less Bottom Rod)

Architecturally finished brass,
bronze or stainless steel

Wrought brass or
bronze rear cover

Low profile; no pinch points –
closed on all sides
Heavy-duty chassis

Single point 1/4 turn
hex key dogging
(ED5860 Series Panic Devices)

5/8" (16mm) throw
deadbolt
ED5000.17
45063-8/15

Functions
ED5000
Pull and Thumbpiece Trim
Rim/
SecureBolt®
ED5200(A)
ED5200S(A)
Inside

Outside

Surface
Vertical Rod
ED5400(A)
ED5470(B)
Inside

Outside

Concealed
Vertical Rod
ED5800(A)
ED5860(B)
Inside

Type

ANSI
No.

Function Description

Exit Only

Exit only; no trim.

Dummy

Entrance by trim when actuating
bar is dogged down.

Nightlatch

Entrance by trim when latchbolt is
retracted by key.

Classroom*

Entrance by thumbpiece. Key locks
or unlocks thumbpiece.

Passage

Entrance by trim when latch
is retracted by thumbpiece.
Thumbpiece is always active, no
cylinder.

Storeroom
(Thumbpiece
Active)

Entrance by thumbpiece only when
released by key. Key removable only
when locked.

Outside

*Classroom function trims can be converted to Storeroom function by a simple field adjustment.

ED5000.18
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Functions
Overview
ED5000
Lever and Knob Trim
Rim/
SecureBolt®
ED5200(A)
ED5200S(A)
Inside

Outside

Surface
Vertical Rod
ED5400(A)
ED5470(B)
Inside

Outside

Concealed
Vertical Rod
ED5800(A)
ED5860(B)
Inside

Type

ANSI
No.

Function Description

Exit Only

Exit only; no trim.

Dummy

Entrance by trim when actuating
bar is dogged down.

Nightlatch

Entrance by trim when latchbolt is
retracted by key.

Classroom*

Entrance by knob or lever. Key locks
or unlocks knob or lever.

Passage

Entrance by trim when latchbolt is
retracted by knob or lever. Knob or
lever always active, no cylinder.

Storeroom
(Grip Active)

Entrance by knob or lever only when
released by key. Key removable only
when locked.

Outside

*Classroom function trims can be converted to Storeroom function by a simple field adjustment.

ED5000.19
45063-8/15

Heavy-Duty Trims & Functions
ED5000
Rim, SecureBolt®, Vertical Rod
Features:
• Free Wheeling vandal-resistant design
• Beveled edges

• Through-bolted to exit device
• Flush cylinder with 6-pin cylinder applications
• 5-year limited warranty

Trim/Function
Passage
ANSI No.
14

Dummy
ANSI No.
02

A910

A950

A9551

A9572

A9591

C910

C950

C9551

C9572

C9591

Dirke
D9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim
Handed: Specify RHR
or LHR

D910

D950

D9551

D9572

D9591

Essex
E9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

E910

E950

E9551

E9572

E9591

Lustra
L9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

L910

L950

L9551

L9572

L9591

Newport
N9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

N910

N950

N9551

N9572

N9591

Pull Trim Design

Armstrong
A9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

Citation
C9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

Classroom Nightlatch Storeroom
ANSI No.
ANSI No.
ANSI No.
08
03
09

1. Classroom function trims can be converted to Storeroom function by a simple field adjustment.
2. Active lever, knob or thumbpiece trim recommended for use with surface or concealed vertical rod exit devices.

ED5000.20
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Heavy-Duty Trims & Functions
ED5000
Rim, SecureBolt®, Vertical Rod
Features:
• Free Wheeling vandal-resistant design
• Beveled edges

• Through-bolted to exit device
• Flush cylinder with 6-pin cylinder applications
• 5-year limited warranty

Trim/Function
Pull Trim Design

Regis
R9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

Princeton
PR9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim

Escutcheon
F9
Escutcheon: Forged
Cylinder: Rim

Passage
ANSI No.
14

Dummy
ANSI No.
02

Classroom Nightlatch Storeroom
ANSI No.
ANSI No.
ANSI No.
08
03
09

R910

R950

R9551

R9572

R9591

PR910

PR950

PR9551

PR9572

PR9591

N/A

F950

N/A

F9572

N/A

ED5000.21
45063-8/15

Utility Trims and Functions
ED5000
Rim, SecureBolt®, Vertical Rod
Features:
• Free Wheeling vandal-resistant design
• Beveled edges

• Through-bolted to exit device
• Flush cylinder with 6-pin cylinder applications
• 5-year limited warranty

Trim/Function
Pull Trim Design

Frascati
FR9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim
Handed: Specify RHR
or LHR
Merlot
M9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim
Zinfandel
Z9
Lever: Cast
Escutcheon: Forged
Cylinder: Rim
Handed: Specify RHR
or LHR

Passage
ANSI No.
14

Dummy
ANSI No.
02

Classroom Nightlatch Storeroom
ANSI No.
ANSI No.
ANSI No.
08
03
09

FR910

FR950

FR9551

FR9572

FR959

M910

M950

M9551

M9572

M959

Z910

Z950

Z9551

Z9572

Z959

ED5000.22
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Utility Trims and Functions
ED5000
Rim, SecureBolt®, Vertical Rod
Features:

• Through-bolted to exit device
• Flush cylinder with 6-pin cylinder applications
• 5-year limited warranty

• Free Wheeling vandal-resistant design
• Beveled edges

Trim/Function
Pull Trim Design

G900 Trim
Knob: Wrought
Escutcheon: Forged
Cylinder: Rim

Passage
ANSI No.
14/15

Dummy
ANSI No.
02

Classroom
ANSI No.
05/08

Nightlatch
ANSI No.
03

Storeroom
ANSI No.
06/09

G910

G950

G9551

G9572

G9591

TH910

TH950

TH9551

TH9572

TH9591

N/A

P950

N/A

P9572

N/A

VT950

N/A

VT9572

N/A

VTL9503

N/A

VTL9572, 3

N/A

K1572

N/A

10-1/4"

3-1/2"

TH900 Trim
Pull: Extruded
Escutcheon: Forged
Cylinder: Rim
Projection: 2-11/16"

10-1/4"
16-1/2"

2-1/2"
1-5/8"

Offset Pull
P9
Pull: Extruded
Escutcheon: Forged
Cylinder: Rim
Handed. Specify RHR
or LHR
VT9 Trim
Plate: Formed
Stainless Steel
Cylinder: Rim
Handed: Specify RHR
or LHR

10-1/4"

3-3/16"
7.25"

9.26

7.94"
9.26"

Key Only
K12
Note: Available with
cylinder option only.
Ex: K157 x 6P.
1. Classroom function trims can be converted to Storeroom function by a simple field adjustment.
2. Not recommended for use on ED5400 or ED5800 series exit devices.
3. VTL has a lip that covers door gap and protects the latch.

ED5000.23
45063-8/15

Utility Trims and Functions
ED5000
Offset
P13, P14*P14
P12 Pull Trim: P12,
P13

Offset Pull
P12
Clearance: 2-1/2"

Offset Pull
P13
Clearance: 2-1/2"

P13

10-3/4"

10"

Specify Part Number, 716F51M x Finish1

Clearance

2-1/2"

10-3/4"
19"
18"

2-1/2"

10-3/4"
19"
18"

11"

Specify Part Number, 716F50M x Finish1

Clearance

P14

2-1/2"

10"

19"
18"
P14

11"
10"

Offset Pull P12
P14
4"
Clearance: 2-1/2"

11"
10"

P12

Clearance

Specify Part Number, 716F52M x Finish1

10"

1. Available in 605, 606, 612, 613, 626, 629 and 630 finishes.
*Available on 1-3/4" thick doors only.

ED5000.24
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Utility Trims and Functions
ED5000
Rim, SecureBolt®, Vertical Rod Features:
• Free Wheeling vandal-resistant design
• Beveled edges
• Through-bolted to exit device

• Flush cylinder with 6-pin cylinder applications
• 5-year limited warranty

Lever: Cast
Escutcheon: Forged
Cylinder: Rim

Functions
Lever Designs
(Choose from list below)

How to Order Example:
Trim x Function #
102910

Passage
Dummy
Classroom
Nightlatch
Storeroom
ANSI No. 14
ANSI No. 02
ANSI No. 08
ANSI No. 03
ANSI No. 09
Function #910 Function #950 Function #9551 Function #957 Function #9591

Muséo®
Georgia

101

102

103

104

1242

1252

106

107

108

109

110

1232

1282

111

112

113

114

115

116

1302

1312

117

1262

105

119

121

122

1272

21G

21L

21M

21S

21W

23M

25M

27M

133

1342

135

1362

137

1382

139

140

141

142

143

Salvador

Marc

1322

Pablo

Jackson

Piet*

Joseph

Georges

*See pages 58 for how to order the Muséo® Piet Lever Collection.
1. Classroom function trims can be converted to Storeroom function by a simple field adjustment.
2. Complies with codes requiring lever to return to within 1/2" (13mm) of door face.
3. 135-138 contain white or back polycarbonate insert

ED5000.25
45063-8/15

Mortise Features
ED5000
ED5600
ED5600A
ED5602L
ED5602AL

Panic-Listed Mortise Exit Device
3-Hour Fire-Listed Mortise Exit Device
Panic-Listed Listed Mortise Double Cylinder Exit Device
3-Hour Fire-Listed Mortise Double Cylinder Exit Device

Features
Handing
Device is non-handed.
Mortise lock body is handed, but field
reversible.
Lever trim may be handed.
Bar length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36"
(762mm-914mm) door.
Optional: 24" (610mm) bar fits 24" (610mm)
door; specify W024.
Optional: 48" (1219mm) bar fits 36"-48"
(914mm-1219mm) door; specify W048.
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Stile
Minimum width 4-1/2" (114mm).
Latchbolt
2-piece mechanical, 3/4" (19mm) throw,
stainless steel with auxiliary deadlocking
latch.
Materials
Heavy-duty cold-forged steel chassis; heavygauge steel mechanisms, electroplated
for corrosion resistance; finished parts are
brass, bronze or stainless steel; stainless steel
springs; nylon bearings.
Projection
3-1/4" (83mm) active, 2-3/4" (70mm)
dogged.
Dogging
Standard on panic devices; single-point 1/4
turn hex key dogging.
Optional: less dogging, specify M51.
Optional: cylinder dogging, specify M52.
Optional: electric dogging; specify M97.
Mechanical dogging not available on firerated devices.

Strike
Non-handed. ANSI curved lip standard.
4-7/8" x 1-1/4" x 1-1/4" lip to center.
Optional strikes available; see Options and
Accessories, page 50.

California State Reference Code
This product has been approved by the
California State Fire Marshal pursuant to section
13144.1 of the California Health and Safety
Code.

Functions and Trims
Through-bolted lever, knob, pull and
thumbpiece trims available with wide range
of functions; see Trims and Functions, pages
30-35.

NFPA
All exit devices comply with NFPA 101 Life
Safety Code.

Cylinders
Cylinder not included unless specified. See
Quick Codes, page 54.

ADA
Exit devices, lever trims and pulls comply with
Americans with Disabilities Act.

Shim Kit
Optional for mounting device over raised
vision light molding; specify M58.

Finishes

All fire-rated devices comply with NFPA 80
Fire Doors and Windows.

BHMA 605
BHMA 606
BHMA 611
BHMA 612

Bright Brass
Satin Brass
Bright Bronze
Satin Bronze

Warranty
Five-year limited.

BHMA 613

Oxidized Bronze, oil rubbed,
available lacquered

Certification/Compliance

613E

Dark Oxidized Satin Bronze
Equivalent

ANSI
Meets A156.3, Type 3, Grade 1.
Meets A117.1 Accessibility Code.

BHMA 618
BHMA 619
BHMA 625

Bright Nickel Plated
Satin Nickel Plated
Bright Chromium Plated

BHMA 626*
(Trim only)

Satin Chromium Plated

626C

Satin Chromium Plated
with MicroShield®

BHMA 629
BHMA 630

Bright Stainless Steel
Satin Stainless Steel

630C

Satin Stainless Steel
with MicroShield®

BHMA 722

Black oxidized bronze,oil
rubbed

Applications and Listings
See page 4.

*Contact factory for devices required in
BHMA 626

ED5000.26
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Mortise Features
ED5000
ED5600K, ED5657K
ED5600L, ED5602L, ED5657L,
ED5602L, ED5600T, ED5657T
Mortise Panic-Listed Exit Devices
ED5600AK, ED5657AK
ED5600AL, ED5602AL, ED5657AL,
ED5602AL, ED5600AT, ED5657AT
Mortise Fire-Listed Exit Devices

How to Order/Specify
Mortise Exit

Trim Type Functions
Passage
Knob

Classroom
Nightlatch
Dummy
Passage
Classroom

Lever or
Flat Plate

Double Cylinder
(Classroom function
Trim only)
Nightlatch

ED5602L,
ED5602AL
Mortise
Double Cylinder
Exit Devices

Dummy
Passage
Thumbpiece

Classroom
Nightlatch
Dummy

Architecturally finished brass,
bronze or stainless steel

Panic

Fire

ED5600K

ED5600AK

ED5657K

ED5657AK

ED5600L

ED5600AL

ED5602L

ED5602AL

ED5657L

ED5657AL

ED5600T

ED5600AT

ED5657T

ED5657AT

Wrought brass or
bronze rear cover

Heavy-duty chassis
2-piece mechanical 3/4" throw
deadlocking stainless steel latchbolt

Low profile; no pinch points –
closed on all sides

Single point 1/4 turn
hex key dogging
(ED5600 Series Panic Devices)

ED5000.27
45063-8/15

Mortise Functions
ED5000
Exit Only, Pull and Thumbpiece Trim
Mortise
ED5600L
ED5600AL
Inside

ANSI No.

Exit Only

Type

ANSI No.

Exit only; no trim.

Function Description

Outside

Entrance by thumbpiece. Key
locks or unlocks thumbpiece.
Specify Thumbpiece - ED5600T or
ED5600AT.

Passage

Entrance by trim when latch
is retracted by thumbpiece.
Thumbpiece always active, no
cylinder. Specify Thumbpiece ED5600T or ED5600AT.

Type

ANSI No.

Dummy

Entrance by trim when actuating
bar is dogged down. Specify
ED5657T or ED5657AT.

Entrance by trim when latchbolt
is retracted by key. Key removable
only when locked. Specify ED5657T
or ED5657AT.

Classroom

Mortise
ED5657T
ED5657AT
Inside

Function Description

Outside

Mortise
ED5600T
ED5600AT
Inside

Type

Function Description

Outside

Nightlatch

ED5000.28
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Mortise Functions
ED5000
Lever and Knob Trim
Mortise
ED5600L
ED5600AL
ED5600K
ED5600AK

Inside

ANSI No.

Classroom**

Entrance by knob or lever. Key locks
or unlocks knob or lever.

Passage*

Entrance by trim when latchbolt is
retracted by knob or lever. Knob
or lever always active, no cylinder.
Specify K, AK, L or AL.

Type

ANSI No.

Dummy*

Entrance by trim when actuating
bar is dogged down.

Entrance by trim when latchbolt
is retracted by key. Key removable
only when locked. Specify ED5657L,
ED5657AL, ED5657K, ED5657AK.

Outside

Mortise
ED5657L
ED5657AL
ED5657K
ED5657AK

Inside

Function Description

Type

Function Description

Outside

Nightlatch**

*Dummy and passage function trims are the same.
**Classroom and Nightlatch function trims are the same. Trim function must be specified when ordered with an exit to
ensure that the correct lock body is supplied with the device.

ED5000.29
45063-8/15

Heavy-Duty Mortise Trims & Functions
ED5000
Features:
• Beveled edges
• Rigid lever when locked
• Flush cylinder
• Through-bolted to exit device
• 5-year limited warranty
Trim/Function
Passage
ANSI No.
14

Dummy
ANSI No.
02

Armstrong
A9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02

A9M10

A9M50

A9M55

A9M57

Citation
C9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02

C9M10

C9M50

C9M55

C9M57

Dirke
D9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02
Handed: Specify RHR or
LHR

D9M10

D9M50

D9M55

D9M57

Essex
E9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02

E9M10

E9M50

E9M55

E9M57

Lustra
L9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02

L9M10

L9M50

L9M55

L9M57

Newport
N9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02

N9M10

N9M50

N9M55

N9M57

Trim Design

Classroom Nightlatch
ANSI No.
ANSI No.
08
03

ED5000.30
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Regis
R9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2"
Mortise A02
Princeton
PR9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2"
Mortise A02
Escutcheon
F9
Escutcheon: Forged
Cylinder: 1-1/2"
Mortise A02

Passage
ANSI No.
14

Dummy
ANSI No.
02

Classroom
ANSI No.
08

Nightlatch
ANSI No.
03

R9M10

R9M50

R9M55

R9M57

PR9M10

PR9M50

PR9M55

PR9M57

N/A

F950

N/A

F9M57

ED5000.31
45063-8/15

Frascati
FR9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2"
Mortise A02
Handed: Specify RHR
or LHR
Merlot
M9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2"
Mortise A02
Zinfandel
Z9M
Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2"
Mortise A02
Handed: Specify RHR
or LHR

Passage
ANSI No.
14

Dummy
ANSI No.
02

Classroom
ANSI No.
08

Nightlatch
ANSI No.
03

FR9M10

FR9M50

FR9M55

FR9M57

M9M10

M9M50

M9M55

M9M57

Z9M10

Z9M50

Z9M55

Z9M57

ED5000.32
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Mortise Utility Trims & Functions
ED5000
Mortise

• Through-bolted to exit device
• Flush cylinder with 6-pin cylinder applications
• 5-year limited warranty

Features:
• Vandal-resistant design
• Beveled edges

Trim/Function
Pull Trim Design

G9M00 Trim
Knob: Wrought
Escutcheon: Forged
Cylinder: 1-1/2" Mortise A02

Passage
ANSI No.
14/15

Dummy
ANSI No.
02

Classroom
ANSI No.
05/08

Nightlatch
ANSI No.
03

G9M10

G9M50

G9M55

G9M57

TH9M10

TH9M50

TH9M55

TH9M57

N/A

P950

N/A

P9M57
(03)

N/A

VT950

N/A

VT9M57

N/A

VTL9503

N/A

VTL9M573

N/A

K1M57

10-1/4"

3-1/2"

TH9M00 Trim
Pull: Extruded
Escutcheon: Forged
Cylinder: 1-1/2" Mortise A02
Projection: 2-11/16"

10-1/4"
16-1/2"

2-1/2"
1-5/8"

Offset Pull
P9M
Pull: Extruded
Escutcheon: Forged
Cylinder: 1-1/2" Mortise A02
Handed: Specify RHR or LHR

10-1/4"

3-3/16"

VT9M Trim
Plate: Formed Stainless
Steel
Cylinder: Mortise
Handed: Specify RHR or LHR

7.25"

9.26

7.94"
9.26"

Key Only
K1M
Note: Available with cylinder
option only.
Ex: K1M57 x 6P.
3. VTL has a lip that covers door gap and protects the latch.

ED5000.33
45063-8/15

Mortise Utility Trims & Functions
ED5000
Offset
P13, P14*P14
P12 Pull Trim: P12,
P13

Offset Pull
P12
Clearance: 2-1/2"

Offset Pull
P13
Clearance: 2-1/2"

P13

10-3/4"

10"

19"
18"

10"

Specify Part Number, 716F51M x Finish1

Clearance

2-1/2"

10-3/4"
19"
18"

2-1/2"

10-3/4"

11"

Specify Part Number, 716F50M x Finish1

Clearance

P14

2-1/2"

10"

19"
18"
P14

11"
10"

Offset Pull P12
P14
4"
Clearance: 2-1/2"

11"
10"

P12

Clearance

Specify Part Number, 716F52M x Finish1

10"

1. Available in 605, 606, 612, 613, 626, 629 and 630 finishes.
* Available on 1 3/4" thick doors only.

ED5000.34
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Mortise Utility Trims & Functions
ED5000
Mortise Features:
• Beveled edges
• Rigid lever when locked
• Through-bolted to exit device

• Flush cylinder
• 5-year limited warranty

Lever: Cast
Escutcheon: Forged
Cylinder: 1-1/2”
Mortise A02

Function
Lever Designs
(Choose from list below)

How to Order Example:
Trim x Function #
102910

Passage
ANSI No. 14
Function
#9M10

Dummy
ANSI No. 02
Function
#9M50

Classroom
ANSI No. 08
Function #08

Nightlatch
ANSI No. 03
Function
#9M57

101

102

103

104

1242

1252

106

107

108

109

110

1232

1282

111

112

113

114

115

116

1302

1312

117

1262

105

119

121

122

1272

21G

21L

21M

21S

21W

23M

25M

27M

133

1342

135

1362

137

1382

139

140

141

142

143

Muséo®
Georgia

Salvador

Marc

1322

Pablo

Jackson

Piet*

Joseph3

Georges

ED5000.35
45063-8/15

Electrified Exit Devices
ED5000
Electrified Exit Devices
The Corbin Russwin ED5000 series
electrified exit devices offer a
complete range of options that may
be integrated into the monitoring
security and alarm systems of
most buildings. The continuum of
appearance is maintained, as well
as the security and function of the
ED5000 mechanical exit device.

Exit Device
Description

List No.

Available options
M61

M91

M92

M93

M94

M97

ED5200 (A) Rim Exit Device

ED5200S (A) Rim SecureBolt Device

ED5400 (A) Surface Vertical Rod

ED5470 (B)

Surface Vertical Rod

SAF

SEC

9903 9905

ED5600 (A) Mortise Exit Device

ED5800 (A) Concealed Vertical Rod

ED5860 (B)

Concealed Vertical Rod

Electrified Hardware Option Descriptions
M61

Alarm Option

M91

Bolt Monitor

M92

Touchbar Monitor

M93

Trim Monitor

M94

Latch Retraction

M97

Electric Dogging

SAF

Fail Safe Operation

SEC

Fail Secure Operation

Delayed Egress2

9903

Fail Safe Electrified Trim

9905

Fail Secure Electrified Trim

* Add as suffix to exit device.
Example: ED5200D x 630 x RHR

Note 1: The following options cannot be ordered together on the same
device:
a) M94 or M97 & D
b) M94 x M97
c) M52 x M97
d) M97 x M107
e) M61 or M92 & D
f) M61 x M92
g) M61x M52
h) M52 & D
i) ED5600 x M91 & M93
j) ED5600 SAF or SEC x M91 or M93
k) Surface vertical rod exit devices with M61 x M91, M92 or M93.
l) M94 or M97 x W024
Note 2: When ordering a surface vertical rod exit device with the D
option, rod and latch guards (provided by other) must be used.
Note 3: M88 (NFPA30) M89 (BOCA-15) and M90 (BOCA-30) are
available only as options for suffix “D” Delayed Egress Exit
Devices.

ED5000.36
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Electrified Exit Devices
ED5000
Electric Latch Pullback M94

Continuous-duty solenoid retracts
the latch bolt(s) for momentary or
maintained periods of time. Latch
Pullback provides a remote means of
unlocking exit devices.
Application
SecureBolt® Exit Devices
Rim Exit Devices
Surface Vertical Rod Exit Devices
Concealed Vertical Rod Exit Devices
Mortise Exit Devices
Listings
UL listed for both Panic and Fire Exit
Hardware.
Electrical Specifications
Requires 782 Controller (120VAC
input, output sequencer for one or
two devices). No substitutes; using
other power sources voids warranty.
Requires a 4-wire electrical transfer
pivot or hinge. See page 43 for
controller information.
Solenoid
A dual retraction/holder-type solenoid.
6-9 Amp in rush @ 24VDC to 28VDC
(.25 Amp holding-continuous duty.)
Device bolts remain retracted for
as long as the device is energized.
Removal of power returns the
device to the life safety, self-latching
mechanical mode.

Electric Dogging M97

This electronic feature will provide
continuous dogging when power is
applied and the push bar is depressed
manually. Interruption or removal of
the power will release the pushbar
and return the exit device back to
normal operation.
Application
SecureBolt® Exit Devices
Rim Exit Devices
Surface Vertical Rod Exit Devices
Concealed Vertical Rod Exit Devices
Mortise Exit Devices
Listings
UL listed for both Panic and Fire Exit
Hardware.
Electrical Specifications
.35 Amps @ 24VDC continuous duty
(2) 36 volt holding magnets holding
force (86 lbf. total)
Note: This feature is not available
with Electric Latch Pullback (M94) or
delayed egress (D) on the same device.
How to Order

Specify Quick Code M97.

Mortise Device Trim
Control
Safe or Secure

Mortise device trim control provides
a remote means of locking and
unlocking the outside lever trim. This
feature is provided by continuous duty
solenoids in the device mortise lock.
Application
Mortise exit devices with lever trim.
Listings
UL listed for both Panic and Fire Exit
Hardware.
Electrical Specifications
24VDC 330 milliamperes
Fail Safe units maintain the door
locked as long as the device is
energized.
Fail Secure units maintain the door
unlocked as long as the device is
energized.
Regulated 24VDC power supply
required.
Note: SAF & SEC options are
only available with ED5600L and
ED5600(A)L version lock body
functions and may not be combined
with either the M91 or M93
monitoring options.
How to Order

Specify Quick Code “SAF” for Safe or
“SEC” for Secure.

Interface with central or local fire
alarm system, automatic door
operators, access control systems,
security alarm systems, and blow open
door systems.
Note: This feature is not available
with Electric Dogging (M97) or
delayed egress (D) on the same device.
How to Order

Specify Quick Code M94.

ED5000.37
45063-8/15

Electrified Exit Devices
ED5000
Delayed Egress Exit Device
The delayed egress option provides
additional security and safety in a strong
line of exit hardware. The delayed egress
exit device is an electromechanical
device used to secure interior or exterior
openings.
Operation
The exit door is normally closed and
latched. The Delayed Egress Exit Device
“D” secures the door in the locked mode
with the solid Red LED indicating locked
mode status. Depressing the pushpad
for less than 3 seconds will sound the
nuisance beep without initiating the alarm.
Depressing the pushpad for 3 seconds
or longer will initiate an irreversible local
audible beeping tone and a visual amber
indicator until the device releases. The
person depressing the exit bar is denied
egress for 15 or 30 seconds and security
personnel are alerted. After the delay time
of 15 or 30 seconds the device releases,
the LED changes to Green, and the alarm
changes to a steady tone which continues
to alarm until manually reset by key. The
remote monitoring contact outputs can be
used to alert security personnel.
Note: The 15-second time delay is
standard. 30-second time delay is optional
(may be accepted by local jurisdiction).
Applications
• For use on hollow metal, wood or
composite interior or exterior doors.
• Available for rim, SecureBolt®,
surface vertical rod, concealed
vertical rod and mortise panic and
fire-rated exit devices. For surface
vertical rod exit devices, rod and
latch guards (provided by other)
must be used.
• Complies with NFPA 101 “Code For
Safety To Life From Buildings And
Structures” by National Fire
Protection Association.
• BOCA options available to comply
with National Building Code
requirements. BOCA option is not
suitable for installations in
accordance with NFPA 101.

• 1-3/4” (45mm) door thickness
standard; 2” (51mm) and 2-1/4”
(57mm) optional; specify D200 or
D214 when ordering.
• Standard 36” device fits 36” doors
only. Device cannot be cut less than
36”.
• Option W048 fits doors 42” – 48”.
Devices cannot be cut less than 42”.
Listing
• UL/cUL Listed
– Fire Exit Hardware
(GXHX/GXHX7)
– Controlled Exit Panic Device
(FUKD/FUKD7)
– Special Locking Arrangements
(FWAX/FWAX7)
• BHMA (ANSI A156.3 and ANSI A156.24)
Directory of Certified Exit Devices
Specifications
Input Voltage: 24VDC (+/- 10%) Regulated
and filtered.
Power Consumption
• Standard Device: 500 mA
• Device with Electric Trim Control:
1.5 Amp
• Mortise Device with “Safe” or
“Secure” option: 1.5 Amp
Standard Features
Key Switch Operation:
• Normal: The system is armed by
applying power to the device (solid
Red LED). Depressing the pushpad
for more than the nuisance delay
time starts the exit delay cycle.
• Bypass: Turning the key switch
clockwise to the bypass position
allows immediate egress without
alarming. The bar functions as a
standard exit device. (Red LED
flashes slow.)

• Reset/Delay: Used to reset device
after the factory set 15 or optional
30 second delay cycle has timed
out. If the device is armed, turning
the key switch counterclockwise to
the reset mode will release the
device without alarm for egress and
will rearm after 10 seconds. (Red
LED flashes quickly.)
• Alarm Strength: 85 Db @ 10’.
Local Visual Status Indicator:
• RED: The exit device is secure and
the delayed egress circuitry is
energized.
• AMBER: The egress cycle has
started, indicated by an irreversible
local audible beeping tone.
• GREEN: Exit device is in alarm and
has released.
Nuisance Delay Time:
Depressing for 3 seconds or less sounds
an audible beep without activating the
irreversible alarm sequence. (Immediate
alarm can be selected by removing a
jumper on the control board.)
Internal Alarm Siren:
When the exit device is armed, depressing
the push pad initiates the internal 85db
alarm siren.
Remote Control Inputs:
• Remote Reset: Accepts a momentary
contact (keyswitch, pushbutton, etc.) to
reset the unit during alarm or allows
momentary egress (10 seconds) when
the unit is armed.
• Remote Bypass: Accepts a momentary
contact to put the unit in a maintained
bypass operation. The exit device
functions as a standard device.

ED5000.38
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Electrified Exit Devices
ED5000
Alarm Outputs:
Two sets of normally open and normally
closed contacts. Contacts change only
during alarm status. One set of contacts
changes when device delay cycle has started
(Alarm). One set of contacts changes when
device has released (Secure).
Door Sign:
Door sign per code included.
How to Order
Specify “D” suffix after device.
Example: ED5200SD
Options
Bolt Position Monitor M91:
SPDT (Single Pole Double Throw) switch
that monitors the position of the latchbolt
or vertical rods. To order, specify M91.
Outside Trim Monitor M93:
Used when outside trim is desired to
be used with an external door position
switch (by others) input. This switch
will allow Bypass (disarms device) when
the trim is used for ingress. The device
requires setting after entry by means of
the keyswitch on the device or a remote
switch. To order, specify M93.
Note: If an external DPS is not used,
standard trim will allow entry without
affecting the device in an armed mode.
The device will only be affected when the
touchbar is depressed.
Mortise Electric Trim Control SAF/SEC:
The mortise delayed egress exit device can
be ordered with Fail Safe or Fail Secure
outside trim operation. In a fire condition
the Fail Safe trim will release for entry.
When access control is used the Fail Secure
trim allows entry by means of a remote
card reader, keyswitch, pushbutton, etc. To
order, specify SAF or SEC.
Note: The trim will open the door without
affecting the device in an armed mode if
a door position switch (by others) is not
used.

30-Second Delay M88:
Device released after 30 seconds. The
device will provide visual and audible
indication that the delayed egress cycle has
been activated. After the device has been
released, the siren changes to a steady tone
which continues until reset by keyswitch
or remote inputs on the device. Required
signage must indicate 30 seconds for
release. To order, specify M88.
Note: 30 seconds may be accepted by
local jurisdiction.

Trims
Utilizes heavy-duty and utility trims. See Trims
and Functions, pages 20-25 and 30-35.
Cylinders
Utilizes a 1-1/8” mortise cylinder; A02
cam. Cylinder not included unless
specified. See Quick Codes, page 54.
Warranty
Exit devices and heavy-duty trim carry
a five-year limited warranty. Electronic
components carry a two-year limited
warranty.

BOCA 15-Second Delay M89:
BOCA 30-Second Delay M90:
Upon pressing the touchpad for 3 seconds
or more, the device will sound an audible
beeping tone and release for egress after
a total of 15 or 30 seconds, sounding
the alarm. When the door is re-secured,
the device will automatically rearm after
30 seconds. A door position switch (by
others) is required for this option. Required
signage must indicate 15 or 30 seconds for
release. To order, specify M89 for BOCA 15
seconds or M90 for BOCA 30 seconds.
Note: BOCA option is not suitable for
installations in accordance with NFPA 101.
Required Accessories
Power Supply:
A regulated and filtered power supply with
a Fire Alarm interface is required.
1 Amp minimum @ 24VDC per device.
Special options will require more
amperage. Consult factory.
To order, specify:
• BPS-24-1 – 1 Amp @ 24VDC power
supply (controls 1 “D” device)
• BPS-24-2 – 1.5 Amp @ 24VDC power
supply (controls 2 “D”s or 1 “D” with
SAF or SEC options)

EPTL
Power Transfer

Power Transfer:
Allows the power to make the transition
from frame to door without pinching or
removal of insulation. Optional power
transfer: EPTL – concealed transfer for up
to and over 120° swing doors. To order
specify Part No. 704F28. Consult catalog
for additional recommended power supplies
and accessories.

ED5000.39
45063-8/15

Electrified Exit Devices
ED5000
M61 Exit Alarm

surface vertical rod exit device will void the
warranties for these products.
Surface vertical rod exit devices with alarm kit
cannot be ordered with M91, M92 or M93.

Activation
Alarm is armed by turning key clockwise.
Low audible chirp indicates alarm has
been activated. Alarm will sound when the
exit device pushpad is depressed. Factory
preset for standard alarm mode which
automatically resets after 5 minutes.
Continuous Alarm Mode
Alarm sounds continuously when the exit
device pushpad is depressed. Alarm must be
manually reset by keyswitch. (This feature is
selected by a switch on the circuit board.)
Low Battery Warning
Audible chirp. Every 30 seconds.
Warning Decal
“EMERGENCY EXIT-ALARM WILL SOUND”
provided.
Nuisance Alarm
Units are factory preset for instant alarm.
Selectable feature for alarm to sound when
exit device touchbar is depressed for more
than 2 seconds. (This feature is selected by a
switch on the circuit board.)
Kit
Available in kit form for field retrofit except
surface vertical rods. Order ED50AK.
Arming Delay/Authorized Egress
A 10-second delay (after arming) permits
egress (by turning key clockwise).
Alarm Shunt
Ingress shunt alarm input for devices with
signal & outside trim monitors (M91 & M93).
Power Requirements
One 9-volt battery (included).
Alarm Strength
90db @ 10 feet.
Arm/Disarm
Requires one 1-1/8" A02 cam mortise
cylinder. Clockwise turn arms the alarm,
counterclockwise turn disarms or silences
the alarm. Low audible chirp indicates alarm
has been activated.
ED5000.40

Device Status
A Red LED indicator will illuminate every 30
seconds when the alarm is armed.
Tamper Resistant
Built-in safety monitor sounds alarm when
tampering occurs.
Cylinders
Mortise 1-1/8” A02 Cam. Cylinder not
included unless specified. See Quick Codes,
page 54.
Door Width
Available for 36”-48” devices only. Not
available with devices less than 36”.
48" device can be cut to fit 42"-48" door.
Quick Code
M61
Alarm Kit
ED50AK
ED50AK x W048 (48” devices) optional
Hard Wired Option
A hard wired option is available by using a
9VDC output power supply and a remote
power harness. Specify 784 to order the
9VDC output power supply. See page
44 for 784 power supply information.
Specify 709F989 to order the remote
power harness for a 36" device and specify
709F999 to order the remote power
harness for a 48" device.

How to Order
Ordering example for Exit Device
ED5400

626

M61

Device
Finish

Quick Code
for Alarm Option
(Cylinder Not

Included)
Ordering Example for Alarm Kit Only
ED50AK

626

Alarm
Finish
Kit

W048

Door
Width
(Cylinder Not
Included)

NOTE: Dogging not available with M61
option and ED50AK alarm kit.

Exceptions
The ED50AK for the ED5000 series exit
devices cannot be retrofitted in the field to
the ED5400/5470 series surface vertical rod
exit devices.
The alarm option is available for the surface
vertical rod devices by factory order only. To
order, add the quick code suffix M61 to the
device number; for example, ED5470 x M61.
Please note, in accordance with Corbin
Russwin’s standard limited warranty, any
attempt to retrofit the ED50AK to a

45063-8/15

Electrified Exit Devices
ED5000
Electrically Controlled
Heavy-Duty Trim

Electrically controlled trim provides electric locking and
unlocking of the 900 Series heavy-duty lever trim. It easily
retrofits into existing applications and is ideal for door
control.
Advantages
• Available in Fail Safe or Fail Secure operation
• 24VAC/VDC
• Internal rectifier accepts AC or DC voltage
• Free Wheeling lever when locked
• Key override (specify cylinder)
• Plug connector with 4' wire lead (Exit device can be used
as the wire raceway)
Applications
• ED5200(A) Rim
• ED5200S(A) SecureBolt®
• ED5400(A) Surface Vertical Rod
• ED5470(B) Surface Vertical Rod
• ED5800(A) CVR
• ED5860(B) CVR

Electrical Specifications
• Solenoid: 330 mA @ 24 volts continuous duty
• Security Monitor Switch (M98): 4 AMP @ 250VAC
Door Thickness
1-3/4" (44mm) standard.
Optional: 2" (51mm); specify D200.
Optional: 2-1/4" (57mm); specify D214.
Options
• M98 – Security Monitor. A SPDT switch that monitors
the position of the solenoid (lock and unlock status).
• M99 – Trim gasket for
exterior applications.
Cylinder
Cylinder not included unless
specified. See Quick Codes,
page 54.
How to Order
N9903 626 RHR M98, 6P

Electrically Controlled
Heavy-Duty Trim

Trim
Utilizes all 900 series trim lever designs including the
Muséo® and Vineyard™ Collections

Functions
Fail Safe
The x9903 trim is locked when power is on and
unlocked when power is off.

Fail Secure
The x9905 trim is locked when power is off and
unlocked when power is on.

Function Description
• Lever is locked when power is on (Free
Wheeling)
• Power off allows entry from trim
x9903
(Fail Safe)

• Inside device is always active for
egress
• Mechanical key override (09
Function – Key allows lever to retract
latch bolt. Key can only be removed
in locked position.)

Function Description
• Lever is locked when power is off (Free
Wheeling)
• Power on allows lever activation for
entry
x9905
(Fail Secure) • Inside device is always active for egress
• Mechanical key override (09 Function –
Key allows lever to retract latch bolt.
Key can only be removed in locked
position.)

x = Lever trim design - Standard, Vineyard™ and Muséo®
ED5000.41
45063-8/15

Electrified Exit Devices
ED5000
782 Controller

Operation
Designed to control one or two electric
latch pullback M94 exit devices. Equipped
with two 20-second timers which can
operate the exit devices together or
independently. Requires a momentary
or timed, dry contact input and can be
interfaced with access control systems,
automatic door operators, “blow open”
type scenarios and has provisions for N/C
fire alarm systems.
Features
• 2 control inputs. Accepts normally
closed dry contacts for device activation
from a key switch, push button, access
control or fire alarm system.
• 2 normally open control outputs for
automatic door operators
• 2 M94 device outputs
• Fire Alarm Interface input
• 24VDC output for audible or LEDS
.25 AMP

Wiring
Up to 40 feet: 16 AWG wire
Up to 60 feet: 14 AWG wire
Up to 100 feet: 12 AWG wire
Electrical Specifications
• 120VAC 60 Hz 750mA (Max)
• 9 Amp inrush for 100 milliseconds

EPTL

Concealed power transfer for over 120°
swing doors. Installs in door and frame
edges. Supports wires up to .25” (6mm)
thick, and works with doors hung with
butt hinges, continuous hinges and pivots.
To order, specify Part No. 704F288.

Listings
UL294
UL Class 2 Outputs

782 Controller

Note: The 782 is the only power source to
be used with the M94 option. Using any
other power supply will void the warranty
and cause possible damage to the exit
device.
Ordering
782 Controller

EPTL

Monitors - M91, M92, M93
Operation
Monitors are used to indicate the authorized and unauthorized use of an opening or to signal and control other opening hardware,
such as magnetic locks. Each monitoring device is equipped with one internal single-pole double-throw (SPDT) switch per monitor.
Bolt Position Monitoring - M91
Provides indication of the position of the
latch bolt. Used with security systems
to monitor the latch bolt; also used to
activate automatic door operators upon
latch retraction.

Touchbar Monitoring - M92
Request to Exit - REX
Provides indication of the pushpad
being depressed. Used as a request to
exit to shunt alarm systems, release
electromagnetic locks or monitor egress.

Application
See chart on page 36.

Listings
UL listed for both Panic and Fire Exit
Hardware.

Electrical Specifications
5 Amps @ 28VDC SPDT contacts

Electrical Specifications
4 Amps @ 250 VAC contacts

Ordering
Specify Quick Code M91.

Ordering
Specify Quick Code M92.

Outside Monitoring or Signaling - M93
Provides indication of the device being
operated from the outside. Used as a
request to enter signal switch to shunt
alarms; also used to monitor entry.
Application
See chart on page 36.
Listings
UL listed for both Panic and Fire Exit
Hardware.
Electrical Specifications
5 Amps @ 28VDC SPDT contacts
Ordering
Specify Quick Code M93.

Orange

Yellow

Tan

White

COM

Blue

COM

Gray

COM

Green

Brown

Pink

ED5000.42
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Electrified Options & Accessories
ED5000
BPS Power Supply

Operation
Power supplies are designed to provide
reliable filtered and regulated power for
long life to a variety of electrified hardware
components. Recommended for the SAF,
SEC, M97, delayed egress exit devices and
electric trim.
Features
• Individual output circuit breakers
• Regulated and filtered fuse protected
outputs
• LEDs monitor zone status (voltage or no
voltage)
• Slide switches connect or disconnect
load from power (Not available on 1
Amp supplies)
• Internal Back-Up battery charging circuit
• Rugged steel enclosure
• Fire alarm interface
Model

Electrical Specifications
• Inputs: 120VAC
• Outputs: 12/24 VDC @ 1 Amp, 2 Amp or
4 Amp, Filtered and regulated outputs
Listings
• UL-cUL CLASS 2
- Signal Appliances
- Access Control System Units
- Special Locking Arrangements Component
• CE
Applications
• D – Delayed Egress
• M97 – Electric Dogging
• SAF – Fail Safe mortise device trim
control
• SEC – Fail Secure mortise device trim
control
Note: Batteries are not included with the BPS power
supply.
Input

Output

BPS-24-1

12" (304mm) x 9” (229mm) x 4” (102mm)

Enclosure

120VAC

1.0 Amp @ 24 VDC

BPS-24-2

14" (356mm) x 14” (356mm) x 4” (102mm)

120VAC

2.0 Amp @ 24 VDC

BPS-24-4

15" (381mm) x 18” (457mm) x 6” (152mm)

120VAC

4.0 Amp @ 24 VDC

BPS-12-1

12" (304mm) x 9" (229mm) x 4" (102mm)

120VAC

1.0 amp @ 12 VDC

BPS-12-3

14" (356mm) x 14" (356mm) x 4" (102mm)

120VAC

3.0 amp @ 12 VDC

784 Power Supply

Features
• Provides a filtered and regulated 9 VDC
remote power
• Requires raceway through the door*
• Optional 12 VDC gel cell battery.
Provides continuous operation of in
the event of a power failure. To order,
specify 793F089.
Includes:
• Plug-In Wall Transformer with
approximately12' (3.6m) of shielded wire
that provides input power to the power
supply
• Includes 12' (3.6m) of shielded wire for
connection between power transfer and
power supply
• To order separately, specify 793F039
*Recommended for new opening. Retrofit application
may require surface mounted wire mold and transfer
loop by others.

Exit Controls and Switches
Key Switches

Push Buttons

MKA

PB2

MKA - (1) SPDT Maintained
MK - (1) SPDT Momentary
MKN - (1) SPDT Momentary NS
MK2 - (1) DPDT Momentary
MKPZ x MKS - (1) SPDT Momentary with
audio Double Gang x Additional Switch
Note: All key switches come standard with
12/24 VDC bi-color LED.

PB2 - (1) SPDT Momentary
PB2 - (1) DPST Remote Momentary
PB3 - (1) DPST Momentary
PB3A - (1) DPST Maintained (Alt. Action)
PB3EA - (1) DPST Alternate

Specifications
• Keyswitch for operation using a
standard 1-1/8" mortise cylinder (A02
cam) (cylinder not included).
• Contact Rating 5 Amps @ 12-24VDC
• SPDT 3-position.

Audible/Visual Annunciators

PB3

Specifications
• 3 Amps @ 12-24 VDC

PZ1
PZ1 - Sonalert 90db @ 2ft. 12-24VDC.
Mounted on one gang stainless steel plate.
Digital Entry
DK-12 - Digital Keypad - 4 User
DK-26SS - Digital Keypad NS - 59 User - SS
Finish
DK-26BK - Digital Keypad NS - 59 User Black Finish
Power Transfers
TSB B-C - Door Cord

ED5000.43
45063-8/15

Electrified Applications
ED5000
Requirements for Electrical and Data Transfer
To answer the demand for “smart” electronic access control and
locking solutions that require fast, easy, and cost-effective installation,
ASSA ABLOY Group brands use the ElectroLynx® standardized plug-in
connectors and color-coded wiring system.
With ElectroLynx, doorway components come pre-wired for easy hookup
to the power source. Key to the system is the transfer device hinge that
carries power from the frame to the locking hardware.

Latch Pullback - M94 Option

782
6000

Features of ElectroLynx:
• Makes it easy to bring power to the locking hardware
• Wires have connectors that snap together, like plugging a telephone
into a jack
To connect an electrified ED5000 series exit device to the electronic
access control system, the following items are required:
• Electrified ED5000 series exit device
• ASSA ABLOY Door Group pre-wired door, or ElectroLynx retrofit cable
(order from McKinney)
• Electronic transfer device (ElectroLynx electronic transfer hinge or
Electrical Power Transfer with standard hinge, from McKinney)
• ElectroLynx cable from the hinge to above the ceiling (order from
McKinney)
Information regarding cable selection, hinge requirements and order
strings can be found in the McKinney Transfer Device Solutions
catalog. Consult 800-810-WIRE (9473) with questions on application
specifications and requirements.
The McKinney QC8 ElectroLynx Hinge is recommended for
the 9903 function, the 9905 function and all options with the
exception of M61 and M93. The McKinney QC12 ElectroLynx Hinge is
recommended for the M61 and M93 options.

501
501

Components
ED5200 x M94 Latch Retraction Exit
Device - Corbin Russwin
782 Controller - Corbin Russwin
6000 Operator - Norton
501 Push Pads - Norton
Power Transfer Hinge
Operation
Operation of Push Pads from either side
of door will activate the 782 Controller
for the Latch Retraction Exit Device.
An internal timer on the 6000 will also
provide length of time door is open
and latch being retracted. Door
operator also acts like standard closer
when opened manually.

ED5000.44
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Electrified Applications
ED5000
Electric Dogging & Touchbar
Monitoring Switch - M97 & M92

BPS

Rim Device with Electric Strike

Latch Pullback - M94 Option
with Norton® 6000 Door
Operator

BPS
6000
782
6000

6000

DK-12

MKA
501
501

501 9232
501

Components
ED5800 x M92 x M97 with Cyl. + Bar
Monitor & Elect. Dogging - Corbin
Russwin
6000 Operator - Norton
501 Push Pads - Norton
Power Transfer Hinge
BPS Power Supply - Corbin Russwin
Key Switch - Corbin Russwin
Operation
Operation of Electric Dogging combined
with the Door Monitor Switch will
enable Push Pads for operation of the
6000. A maintained keyswitch will
control the activation of the electric
dogging which is powered by the Power
supply. A Fire Alarm Tie-In, if required,
will release the dogging and let the
operator work in manual mode when
activated. (NOTE: Electric Dogging is
not automatic like Latch Retraction.
It requires the bar to be pushed in
manually the first time after
applying power.)

Components
ED5200 Exit Device - Corbin Russwin
Digital Keypad
310-4 Electric Strike
BPS Power Supply - Corbin Russwin
Operation
Operation of DK-12 Digital Keypad
will allow keyless entry from the nonprotected side of opening. Free exit using
the exit device from the protected side of
the door.

Components
ED5400 x M94 Latch Retraction Exit Device
- Corbin Russwin
782 Controller - Corbin Russwin
6000 Operator - Norton
501 Push Pads - Norton
Power Transfer Hinge
Keyswitch - Corbin Russwin
Operation
Activation and operation of Push
Pads from either side of door will be
controlled by the Maintained Keyswitch.
The Push Pads will in turn activate the
782 Controller for the Latch Retraction
Exit Device. An internal timer on the 6000
will coordinate and prevent the door from
being opened before latch retraction takes
place. Standard timers on the 6000 will
also provide length of time door is open
and latch being retracted. Door operator
also acts like standard closer when opened
manually.

ED5000.45
45063-8/15

Electrified Applications
ED5000
Rim Exit Device with Delayed
Egress Option on “Exit Only”
Door

Electric Trim

Rim Exit Device High-Security Application
M91, M92 and M93 Monitoring
Switch Options With Door
Position Switch

Rim Exit Device with
Electrified Trim

BPS

DPS

DK-12
M91, M92, M93

Components
ED5200D - Delayed Egress Exit Device Corbin Russwin
Power Transfer Hinge
BPS Power Supply - Corbin Russwin
Surface Door Closer - Corbin Russwin
Operation
Operation of the ED5200 D Exit Device
will sound an alarm and activate either a
15- or 30-second alarm sequence inside of
the exit device. After this time period, the
device will release the push bar, making
it active, and egress is possible. When
the fire alarm is activated, power to the
exit device will be interrupted, allowing
free egress and mechanical latching.
Authorized alarm bypass and reset is done
through the built-in keyswitch located in
the exit device.

Components
ED5200 - A957 Nightlatch Trim - Corbin
Russwin
M91 Bolt Monitor Switch
M92 Touchbar Monitor Switch
M93 Trim Monitor Switch
Door Position Switch
Power Transfer Hinge
Surface Door Closer - Corbin Russwin
Operation
Operation of the ED5200 Exit Device with
the M91, M92, M93 and a door position
switch can be used together or individually
to sound an alarm, shunt an alarm, monitor
the door’s security or as a “Request to Exit”
in conjunction with a magnetic lock.

Components
9905 Electrified Trim - Corbin Russwin
ED5200 Rim Exit Device - Corbin Russwin
DK-12 Digital Keypad by Corbin Russwin
Electrified Hinge
BPS-24-1 Power Supply - Corbin Russwin
Operation
Operation of the 917 Digital Keypad
will allow keyless entry from the nonprotected side of the opening. When a
valid code is entered into the keypad,
voltage will be applied to the trim,
making the lever active and allowing
ingress. Free exit is allowed by using the
exit device from the protected side of
the door.

ED5000.46
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Mullions and Surface Bolt Kit
ED5000
Mullions

Options

Used to install two Rim Exit Devices in
a double door opening. May be quickly
and easily removed when a full double
door opening is temporarily required.
Materials and Finish
Steel mullions, 2" x 3" with malleable
iron top and bottom retainers; furnished
with zinc-plated fasteners for metal
frames and concrete floors. May be
cut, drilled and tapped in the field for
Rim Exit Devices. Mullion and Mullion
retainers are prime coat red paint.

How to Order

Spacer Block
Recommended for double rabbeted frames where the stop face
width is less than the mounting hole spacing and also for door
frames 5-3/4" (176mm) or less. To order with a mullion, specify
M95. To order separately, specify Part No 744F328.
Angle Bracket
Recommended for any header configuration with less than 3"
(76mm) of mounting surface. To order with a mullion, specify
M96. To order separately, specify
Part No 744F338.
Mullion Stabilizer Kit
Controls the movement of the mullion. Recommended for
openings over 7’ high, or whenever door movement must
be minimized. To order with mullion, specify M57. To order
separately, specify Part No. 653F11-1 x 628 (aluminum).
Surface Bolt Kit
Designed for severe windload (Hurricane Code) environments
where surface bolts are required (e.g., on
inactive doors). To order separately, specify
Part No 988CR.

Removable Mullions
Up to 7'0"

Steel Mullion - Panic Rated

Specify
Quick Code
907

Up to 8'0"

Steel Mullion - Panic Rated

908

Up to 10'0" (ED5200, ED5200S only)

Steel Mullion - Panic Rated

910

Up to 7'0"

Steel Mullion - 3 Hour Fire Rated

907A

Up to 8'0"

Steel Mullion - 3 Hour Fire Rated

908A

Up to 7'0"

Steel Mullion - 3 Hour Fire Rated, Windstorm Certified

FE707A1

Up to 8'0"

Steel Mullion - 3 Hour Fire Rated, Windstorm Certified

FE708A1

Door Height

Description

Key Removable Mullions

Up to 7'0"

Steel Mullion - 1-1/2 Hour Fire Rated

Specify
Quick Code
907BKM2

Up to 8'0"

Steel Mullion - 1-1/2 Hour Fire Rated

908BKM2

Up to 10'0" (ED5200, ED5200S only)

Steel Mullion - Panic Rated

910KM2

Up to 7'0"

Steel Mullion - 3 Hour Fire Rated, Windstorm Certified

WS707AKM2

Up to 8'0"

Steel Mullion - 3 Hour Fire Rated, Windstorm Certified

WS708AKM2

Door Height

Description

Notes:
1. For use with UL listed door assemblies that comply to FEMA 361 and FEMA 320 guidelines.
For the latest listings on compliant door assemblies visit our website at corbinrusswin.com
2. Cylinder and collars not included, specify separately. See page 54.

Parts - Key Removable Mullion
Top Retainer and Screw Packet and Bottom Retainer and
Screw Packet
Mullion
Series

Top Retainer and
Screw Packet

Bottom Retainer
and Screw Packet

Locking
Mechanism Packet

907BKM
908BKM
910KM

713F948

713F988

744F258

WS707AKM
WS708AKM

713F958

713F908

744F208

Parts - Removable Mullion
Top Retainer and Screw Packet and Bottom Retainer and
Screw Packet
Mullion
Series

Top Retainer and
Screw Packet

Bottom Retainer
and Screw Packet

907
908
910
907A
908A

713F518

713F528

FE707A
FE708A

713F938

713F998

ED5000.47
45063-8/15

Options & Accessories
ED5000
Shim Kits
Designed for mounting an exit device over raised vision light molding.
Each kit contains two sets of 1/8" thick shims to shim a device 1/8"
(3mm) or 1/4" (6mm). Black finish. To order with exit device, specify
M58. To order separately, specify Part No.
Exit Device Type

Shim Kit Part No.

ED5200 (A)
ED5200S(A)

697F33-8

ED5600 (A)
ED5800 (A)
ED5860(B)
ED5400 (A)

697F34-8

ED5470(B)

Cylinder Dogging

Cylinder Dogging Kit

To order Cylinder Dogging with exit device, specify M52. Cylinder
not included unless specified. Cylinder dogging not available for
fire-rated devices. See Quick Codes, page 54.

Designed to convert a panic device from hex key dogging to
cylinder dogging. To order Cylinder Dogging Kit, specify Part
Number x Finish below. Cylinder not included.
697F862
Cylinder nut
650F959
Cylinder spacer

Surface and Concealed Vertical Rod
Extension Kits
Used to extend the height of standard length rods supplied with
vertical rod exit devices. Available in 2", 6" and 12" sizes. To order
with exit device, see Quick Codes, page 54. To order separately,
specify Part No. x Finish.
Rod Extension

Rod Extension Kit
Part No.

2" (50mm)

655F15 x Finish

6" (152mm)

655F16 x Finish

Bar Length

Cylinder Dogging Kit
Part No.

12" (305mm)

655F17 x Finish

Standard (W036)

653F12 x Finish

24" (610mm)

684F42 x Finish

W048

653F14 x Finish

1000-118-A02
Cylinder

Note: Cylinder dogging not available for fire-rated devices.

ED5000DB Inactive Bar
Non-operating dummy pushpad available for doors up to 48" wide. May be
field cut for narrower doors. To order, specify ED5000DB x Finish.

46” (117cm)

ED5000.48
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Options & Accessories
ED5000
End Cap
Reinforcement**
A solid steel plate,
welded to the end
bracket, evenly
distributes impact
forces over a larger
surface area,
eliminating point loading.
To order with an exit
device, specify
M109. To order separately
specify 705F09 x finish.
Flush End Cap
Durable heavy-duty cast
steel or stainless steel, sits
flush on the
exit device rail and has
a low profile which
eliminates catch points.
To order with a device,
specify M110. To order
separately specify
710F00M x finish.
11/16"
(18mm)

3-1/2"
(99mm)

1-1/4"
(32mm)

SecureBolt® and FireRated Rim Strike and
Rim Strike
ED5200S, ED5200SA and
ED5200A devices. Supplied
with locking plate and two
1/16" (1.6mm) shims. For
doors with 1/2" (13mm)
or 5/8" (16mm) stop.
Adjustable to compensate
for shrinkage and swelling
of door. 3-1/2" x
1-1/4" (89mm x 32mm).
Black finish only. To order
separately specify 650F308 ED5200(A) or 730F77-8
ED5200S(A).
Rim x Vertical Rod Strike
Required for ED5200 and
ED5200S devices when
used on pair of doors with
vertical rod devices. Black
finish only. To order with
device, specify S02.
To order separately, specify
655F71-8.

Surface and Concealed Vertical Rod Strikes
(Screws Included)
Top Strike
Standard on ED5400(A)
and ED5800(A) devices.
Supplied with two 1/16"
(1.6mm) shims and
one 1/16" (1.6mm)
locking plate. Adjustable
to compensate for
shrinkage and swelling
of door. 1-9/16" x
15/16" (40mm x 24mm).
Black finish only. To
order separately, specify
650F54-8.

Bottom Strike
Standard on ED5400(A)
and ED5800(A) devices.
1-1/16" (27mm)
diameter x 1/16"
(1.6mm) lip x 11/16"
(17mm) high. Black
finish only.
Both top and bottom
strikes are included in
the vertical rod parts
packet. To order parts
packet, specify 650F57-8.
Top Strike
Standard for ED5470 and
ED5470B devices. Supplied
with one 1/16" (27mm)
shim. Adjustable to
compensate for shrinkage
and swelling of door. 2"
x 1" (51mm x 25mm).
Black finish only. Top strike
is included in SVR parts
packet. To order parts
packet, specify 654F158
(M55) or 697F978. To
order strike separately,
specify 681F70-8.

Top Strike
Standard for ED5860
and ED5860B devices.
Recessed strike. 2" x
1-5/8" (51mm x 41mm).
Black finish only. Top strike
is included in CVR parts
packet. To order parts
packet, specify 698F058
or 698F048 (M55). To
order separately, specify
681F77-8.
Flush Transom Top
Strike Bracket
Optional for use with
ED5400 and ED5400A
devices. Used to mount
top strike on openings
with flush transom.
2-1/2" x 1-5/8" (64mm
x 41mm). Black finish
only. To order with exit
device, specify M67. To
order separately, specify
650F87-8.
Bottom Strike for 1/2"
Thresholds
Recommended for use
with vertical rod devices.
Required in fire-rated
openings with 1/2"
(13mm) threshold or for
flush mount. 2-5/8" x
1-1/16" (67mm x 27mm).
Black finish only. To order
with exit device, specify
S09. To order separately,
specify 650F88-8.

**Note: Six 1/4 x 20 screws come standard with either M109 option or 705F09 kit. Only two screws required to fasten end cap assembly to door for retrofit. Other four screws are used
with SecureBolt® Latch Head if ordered as an M109 option with complete device. When the kit is ordered a new end cap is also supplied.

ED5000.49
45063-8/15

Options & Accessories
ED5000
Mortise Strikes

Filler Plates

Mortise Strike
Standard on ED5600 and
ED5600A. Non-handed,
ANSI curved lip, 4-7/8" x
1-1/4" x 1-1/4" (124mm
x 32mm x 32mm) lip to
center. Black finish. To
order separately, specify
650L657020.

Mortise Strike for Pairs of
Doors with Astragal
Optional for use with
ED5600 and ED5600A
devices where an astragal is
to be installed. Non-handed,
ANSI straight lip, 4-7/8" x
1-1/4" x 7/8" (124mm x
32mm x 22mm) lip to center.
Black finish. To order with
exit device, specify SS078.
To order separately, specify
653L157014.
Open Back Strike
Optional for use with
ED5600 x vertical rod devices
on a pair of doors. Nonhanded, 4-7/8" x 1-1/4"
(124mm x 32mm). Black
finish. To order with exit
device, specify SB134 for
1-3/4" doors, SB214 for
2-1/4" doors. To order
separately, specify Part No.
Door
Thickness
1-3/4"
(44mm)
2-1/4"
(57mm)

Type

Part No.

Curved lip

653L183016

Straight lip

653L163016

Curved lip

653L183020

Straight lip

653L163020

Mortise Strike
Standard on ED5600
and ED5600A devices
on 2" (51mm) (D200)
and 2-1/4" (57mm)
(D214) thick doors.
Handed ANSI curved
lip, 4-7/8" x 1-1/4"
x 1-1/2" (124mm x
32mm x 38mm) lip to
center. Black finish.
To order separately,
specify 656L677024
for LHR doors,
656L687024 for RHR
doors.

ANSI Wrought
Strike Box
Optional for use
with ED5600 and
ED5600A devices. To
order with exit device,
specify M17. To order
separately, specify
120F76-8.

Optional for use on
stock metal doors when
required. To order,
specify 334F99-8 600.

Optional for use on
stock metal doors when
required. To order, specify
236L708018 x Fin.

Optional for use on
stock metal doors when
required. To order,
specify 077F19-8 600.

ED5000.50
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Facts & Figures
ED5000
ED5000 Series
(all variables)
Series

“A”

“B”

ED5000
ED5000A

32-7/8"
(835mm)

18"
(457mm)

ED5000 x W048
ED5000A x W048

44-7/8"
(1140mm)

24"
(610mm)

ED5000 x W024
ED5000A x W024

20-7/8"
(530mm)

12"
(305mm)

ED5000.51
45063-8/15

Cylinders
ED5000
700 Series KRM* &
Cylinder Dogging
Mortise cylinders

Description

Part Number

6-pin
7-pin
6-pin, IC
7-pin, IC
6-pin, IC, less core
7-pin, IC, less core
6-pin, Security
6-pin, Security IC
7-pin, Pyramid Security
7-pin, Pyramid Security IC
7-pin, Pyramid High Security
7-pin, Pyramid IC High Security

1000-118-A02
1000-114-A02-7
1080-114-A02
1080-112-A02-7
1070-114-A02
1070-112-A02-7
1010-118-A02
1090-114-A02
1027-114-A02
1037-114-A02
1020-114-A02
1030-114-A02

Cylinder
Dogging
Collars
N/A
270F15
270F15
654F07
270F07
654F07
N/A
270F15
270F15
270F15
270F15
270F15

Key Removable Mullions*
Part Number

Cylinder Collar

1000-118-A02
1000-114-A02-7
1080-114-A02
1080-112-A02-7
1070-114-A02
1070-112-A02-7
1010-118-A02
1090-114-A02
1027-114-A02
1037-114-A02
1020-114-A02
1030-114-A02

None Required
None Required
None Required
447F42
None Required
447F42
None Required
None Required
None Required
None Required
None Required
None Required

*The 700 series key removable mullion was discontinued on January 1, 2010. The cylinders and cylinder rings are listed for reference only.

900 Series Trim
Rim cylinders

Description
6-pin
7-pin
6-pin, IC
7-pin, IC
6-pin, IC, less core
7-pin, IC, less core
6-pin, Security
6-pin, Security IC
7-pin, Pyramid
7-pin, Pyramid IC
7-pin, Pyramid Security
7-pin, Pyramid Security

Part Number
3000-058
3000-058-7
3080-058
3080-058-7
3070-058
3070-058-7
3010-058
3090-058
3020-058
3030-058
3027-058
3037-058

Cylinder Collar
None Required
422F88
422F88
686F98
422F88
686F98
None Required
422F88
422F88
422F88
422F88
422F88

57 Function Part Number
3000-200N*
3000-200-7
3080-178
3080-178-7
3070-178
3070-178-7
3010-200
3090-178
3020-200N
3030-178
3027-200N
3037-178

Cylinder Collar**
None Required
422F88
422F88
686F98
422F88
686F98
422F88
422F88
422F88
422F88
422F88
422F88

*For K157, substitute -200
**K157 uses the 270F15 cylinder ring

900 Series KRM
Mortise cylinders

900 Series Cylinder Collar
Description
6-Pin
7-Pin
6-Pin, IC
7-Pin, IC
7-pin, Pyramid High Security
7-pin, Pyramid Security
7-pin, Pyramid High Security IC
7-pin, Pyramid Security IC
Security
Security IC
6-pin, IC, less core
7-pin, IC, less core

Part Number
1000-118-A62
1000-114-A62-7
1080-114-A62
1080-112-A62-7
1020-114-A62
1027-114-A62
1030-114-A62
1037-114-A62
1010-118-A62
1090-114-A62
1070-114-A62
1070-112-A62-7

Quick Code
6P
7P
C6
C7
PHS
PS
PCHS
PCS
HS
CHS
CL6
CL7

WS700 Series Cylinder Collar

1-1/8"

1-1/4" or
1-1/4" IC

1-1/2" IC

1-1/8"

610F01*

447F43*

609F37*

447F42*

1-1/4" or
1-1/2" IC
1-1/4" IC

610F01*

609F36*

*Specify Finish

900 Series Mortise
Trim
Mortise cylinders

Description
6-pin
7-pin
6-pin, IC
7-pin, IC
6-pin, IC, less core
7-pin, IC, less core
6-pin, Security
6-pin, Security IC
7-pin, Pyramid High Security
7-pin, Pyramid IC High Security
7-pin, Pyramid Security
7-pin, Pyramid Security IC

Part Number
1000-112-A02
1000-112-A02-7
1080-112-A02
1080-112-A02-7
1070-112-A02
1070-112-A02-7
1010-112-A02
1090-112-A02
1020-112-A02
1030-112-A02
1027-112-A02
1037-112-A02

Cylinder Collar
None Required
None Required
None Required
None Required
None Required
None Required
None Required
None Required
None Required
None Required
None Required
None Required

ED5000.52
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Cylinders
ED5000

Inside Cylinder For
ED5602 Double Cylinder
Exit Device
Rim cylinders

ED5602 Double Cylinder Exit Device
Rim cylinders

Description

Part Number

ED5202 Double Cylinder
Exit Device
Rim cylinders

Cylinder Collar

Description

ED5202 Double Cylinder Exit Device
Rim cylinders

Part Number

Cylinder Collar

6-pin

3000-200

270F15

6-pin

3000-138

270F15

7-pin

3000-200-7

654F07

7-pin

3000-138-7

654F07

6-pin, IC

3080-178

654F07

6-pin, IC

3080-114

654F07

7-pin, IC

3080-178-7

654F08

7-pin, IC

3080-114-7

654F08

6-pin, IC, less core

3070-178

654F07

6-pin, IC, less core

3070-114

654F07

7-pin, IC, less core

3070-178-7

654F08

7-pin, IC, less core

3070-114-7

654F08

6-pin, Security

3010-200

654F07

6-pin, Security

3010-138

654F07

6-pin, Security IC

3090-178

654F07

6-pin, Security IC

3090-114

654F07

7-pin, Pyramid

3020-200

654F07

7-pin, Pyramid

3020-138

654F07

7-pin, Pyramid IC

3030-178

654F07

7-pin, Pyramid IC

3030-114

654F07

7-pin, Pyramid Security

3027-200

654F07

7-pin, Pyramid Security

3027-138

654F07

7-pin, Pyramid Security

3037-178

654F07

7-pin, Pyramid Security

3037-114

654F07

900 Series
KRM Cylinder
Collar Packet

Rim Thumbturn
Description

Part Number

Rim Thumbturn - 1-3/8"

3300 -138

Rim Thumbturn - 1-3/8" - Ergonomic

3300-138-M34

Rim Thumbturn - 2"

3300-200

Rim Thumbturn - 2" - Ergonomic

3300-200-M34

Mullion Series

Cylinder Length and Type
1-1/8"

1-1/4"

1-1/4" IC

1-1/2" IC

WS707AKM
WS708AKM

447F42*

610F01*

609F36*

907BKM
908BKM
910KM

610F01*

447F43*

609F37*

Note: Cylinder collar packets contain a collar and spring washer.
*Specify finish when ordering packets.

ED5000.53
45063-8/15

Quick Codes
ED5000
Cylinder and Keying
Description
Less cylinder(s)

Cylinder and Keying (cont)
Description

Specify
(standard)

Specify

Visual key control (VKC)

Conventional 6-pin

No keying data stamped on key or cylinder

VKC0

Conventional 7-pin

Keys only

VKC1

Security

Cylinders and keys (not for HS or CHS)

VKC2

Cylinders only (not for HS or CHS)

VKC3

Security interchangeable core (IC)
IC 6-pin
IC 6-pin with temporary construction core
(Red)
IC 6-pin with temporary construction core
(Blue)
IC 6-pin with temporary construction core
(Green)
IC 6-pin with temporary construction core
IC 6-Pin with temporary disposable core

CHS
C6

Concealed key control (CKC)

CT6R

CKC cylinders with VKC keys
CKC cylinders only

CKC3

CT6B

2 keys per cylinder

(standard with cylinder)

Other than 2 keys

KY# (e.g., KY6)

CT6G
CT6
CT6D

IC 6-pin less core

CL6

SFIC 6-pin with less core
SFIC 6-pin with SFIC disposable temporary
core
IC 7-pin (rim only)

CLS6

IC 7-pin with temporary construction core
(Red)
IC 7-pin with temporary construction core
(Blue)
IC 7-pin with temporary construction core
(Green)
IC 7-pin with temporary construction core
IC 7-Pin with temporary disposable core

CT6SD
C7
CT7R
CT7B
CT7G
CT7
CT7D

IC 7-pin less core (rim only)

CL7

SFIC 7-pin with less core

CLS7

SFIC 7-pin with SFIC disposable temporary
core3

CKC2

Strikes
Description

Specify

Rim x vertical rod on pairs of doors

S02

Surface and concealed vertical rod
Bottom strike for 1/2" thresholds or flush
mount

S09

Mortise ANSI strike for pairs of doors with
astragal

SS078

Open back strike for 1-3/4" doors

SB134

Open back strike for 2-1/4" doors

SB214

Door Height
Door Height

Specify

ED5400(A) and ED5470(B) devices

CT7SD

7'0"

(standard)

7'2"

H0702

Pyramid Security IC

PCS

7'6"

H0706

Pyramid Fixed Core

PHS

8'0"

H0800

Pyramid Security fixed core

Pyramid IC

PCHS

Pyramid with temporary construction core

CTP

Pyramid less core

CLP

Blockout function

0-bitted with 2 blank keys
Keyed random
Construction master keyed

(standard)
KR
CMK

ED5800(A) devices
8'0"

(standard)

ED5470(B), ED5860(B) devices only
9'0"

H0900

10'0"

H1000

Door Width
Door Width

Specify

24" (610mm)

W024

36" (914mm)

(standard)

48" (1219mm)

W048

ED5000.54
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Quick Codes
ED5000
Door Thickness
Door

Miscellaneous Options
Description

Specify

Torx® head screws

M04

1-3/4" (44mm)

(standard)
D200

ANSI wrought strike box (mortise)
Knurling outside and inside (embossed touchbar device side)1

M17

2" (51mm)
2-1/4" (57mm)

D214

Knurling outside only (trim side)

M21

Knurling inside only (embossed touchbar device side)

M22

Finish
Description

M20

Abrasive coat outside and inside (trim and device)

M23

Specify

Abrasive coat inside only (device side)

M24

US3

Bright Brass

605

Abrasive coat outside only (trim side)

M25

US4

Satin Brass

606

US9

Bright Bronze

611

24", 36" and 48" PathLite™ Photoluminescent
Touchbar Cover

M49

US10

Satin Bronze

612

Less dogging

M51

US10B

Dark Oxidized Satin Bronze,
oil rubbed

613

Cylinder dogging

M52

Sex nuts and bolts (SNBs)

M54

10BE

Dark Oxidized Satin Bronze Equivalent

613E

US14

Bright Nickel Plated

618

Less bottom vertical rod (ED5470(B)/ED5860(B) Only)

M55

US15

Satin Nickel Plated

619

Narrow Stile Cover

M56

US26

Bright Chromium Plated

625

Mullion stabilizer

M57

US26D

Satin Chromium Plated

626* (Trim only)

Shim kit (for vision light)

M58

Satin Chromium Plated
with MicroShield®

626C

Parabolic escutcheon

M60

Wood screws for use on fire-rated solid wood or
wood core doors

M64

Flush transom top strike bracket (ED5400 and
ED5400A only)

M67

Door frame filler block for double rabetted frames

M95

Door frame angle bracket for aluminum frames

M96

Windstorm Certified products for ED5200S(A) and
ED5470(B) Only2, 3, 4, 5

M107

High Impact End Clamp

M109

Flush End Cap

M110

US32

Bright Stainless Steel

629

US32D

Stain Stainless Steel

630

Stain Stainless Steel
with MicroShield®

630C

—

Black oxidized bronze,oil rubbed

722

*Contact factory for devices required in BHMA 626

Handing
Hand

Specify

Right Hand Reverse

RHR

Left Hand Reverse

LHR

Notes:
1. Not available with VT9, VTL9, VT9M and VTL9M trim.
2. ED5200S(A) x M107 requires through bolts.
3. ED5470(B) maximum opening height is 8'0".
4. Contact Ceco, Curries® or Fleming for detailed frame/door requirements and limitations.
5. Not available with electric dogging (M97).

ED5000.55
45063-8/15

Quick Codes
ED5000
Key Removable Mullions
Description

Removable Mullions
Specify

Description

Specify

Up to 7'0" Steel Mullion - 1-1/2 Hour Fire Rated 907BKM1

Up to 7'0" Steel Mullion - Panic Rated 907

Up to 8'0" Steel Mullion - 1-1/2 Hour Fire Rated 908BKM1

Up to 8'0" Steel Mullion - Panic Rated 908

Up to 10'0" (ED5200, ED5200S only) Steel Mullion
- Panic Rated

910KM1

Up to 10’0” (ED5200, ED5200S only) Steel Mullion
- Panic Rated

Up to 7'0" Steel Mullion - 3 Hour Fire Rated,
Windstorm Certified

WS707AKM1

Up to 7'0" Steel Mullion - 3 Hour Fire Rated 907A

Up to 8'0" Steel Mullion - 3 Hour Fire Rated,
Windstorm Certified

WS708AKM1

Note:
1. For use with UL listed door assemblies that comply to FEMA 361 and FEMA 320 guidelines.
For the latest listings on compliant door assemblies visit our website at corbinrusswin.com

910

Up to 8'0" Steel Mullion - 3 Hour Fire Rated 908A
Up to 7'0" Steel Mullion - 3 Hour Fire Rated,
Windstorm Certified

FE707A1

Up to 8'0" Steel Mullion - 3 Hour Fire Rated,
Windstorm Certified

FE708A1

Note:
1. Cylinder and collars not included, specify separately. See page 54.

Electrified Options for Exit Devices
Description

Specify

BPS-12-1

M92

Power supply 3.0 Amp @ 12 VDC output

BPS-12-3

Power Supply 1 Amp @ 24 VDC Output

BPS-24-1

Power Supply 2 Amp @ 24 VDC Output

BPS-24-2

Power Supply 4 Amp @ 24 VDC Output

BPS-24-4

Bolt Position Monitoring
Request to Exit/Touchbar Monitoring or Signaling
Outside Trim Monitoring or Signaling

M93

Electric Latch Pullback

M94

Electric Dogging

M97

Mortise Device Lock with Outside Trim Control (Fail
Safe)

SAF*

SPDT Maintained Switch
SPDT Momentary Switch
SPDT Momentary NS Switch

SEC*

Delayed Egress (15 second delay standard)

30 second delay (may be accepted by local
jurisdiction) (with “D” option only)

M88

BOCA 15-second delay (with “D” option only)

M89

BOCA 30-second delay (with “D” option only)

M90

Trim Gasket

Part Number

M91

M61

Security Monitor

Description
Controller (Required for Electric Latch
Pullback(M94))
Power supply 1.0 Amp @ 12 VDC output

Exit Alarm Device (cylinder not included)

Mortise Device Lock with Outside Trim Control (Fail
Secure)

Electrified Accessories

DPDT Momentary Switch
DPST Maintained (Al. Action) Switch
Sonalert 90lbs. @ 2 ft. 12-24VDC mounted on one
gang stainless steel plate
Alarm Kit (cylinder is not included)*
Concealed transfer for over 120° swing doors

782

MKA
MK
MKN
MK2
PB3EA
PZ1
ED50AK
EPTL

M98^
M99

*Only available with ED5600L and 5600(A)L
^9903/9905 trims only.

ED5000.56
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

How to Order
ED5000
Where to find ordering
information and Quick Codes

Ordering Examples
Exit Device Only*
Quantity

Series/
Function

Finish

Hand

Misc.
Options

ED5200S

626

RHR

M51

Functions and Trims
Rim and
Vertical Rod............ Pg 20
Mortise....................... Pg 30
Cylinders and Keying... Pg 55
Door Height................ Pg 55
Door Width................. Pg 55

*To order mortise exit device only, see Mortise Exit Only below.

Trim Only

Strike.......................... Pg 55
Finish.......................... Pg 56
Door Thickness............ Pg 56
Handing...................... Pg 56
Miscellaneous
Options....................... Pg 56
Removable Mullion..... Pg 57

LHR

Quantity

Trim/
Function

Finish

Hand

Door
Thickness

N955

625

RHR

D214

RHR

LHR

Left Hand Reverse

Note: Arrow (

RHR

Right Hand Reverse

) indicates secure side of door.

Exit Device with Trim

Left Hand Reverse

Right Hand Reverse

Quantity

Exit Device

Trim/
Function

Finish

Hand

Door Thickness

Optional Strike

Door Width

Misc. Options

ED5600L

N9M55

605

LHR

D214

SB214

W048

M51-M54

Contract/Detailed Order – Surface Vertical Rod Exit Device with Trim
Quantity

Keyset

Exit Device

Trim/
Function

Finish

Hand

Door Height

Door Width

Misc. Options

Cylinder
Option

AA1

ED5470

C955

626

LHR

H1000

W048

M52-M54

Removable Mullion

Mortise Exit Only
Trim Type

Functions
Passage

Knob

Lever or Flat
Plate

Classroom
Nightlatch
Dummy
Passage
Classroom
Double Cylinder
(Classroom function lever
Trim only)
Nightlatch

Panic

Fire

ED5600K

ED5600AK

ED5657K

ED5657AK

ED5600L

ED5600AL

ED5602L

ED5602AL

ED5657L

ED5657AL

ED5600T

ED5600AT

ED5657T

ED5657AT

Quantity

Mullion

Misc. Options

908A

M96

Dummy
Passage
Thumbpiece

Classroom
Nightlatch
Dummy

ED5000.57
45063-8/15

How to Order the Muséo® Piet Levers
ED5000
Muséo® Piet Lever Collection Trim and Finish Options

Grooved Insert
21G

Leather Insert
21L

Polished with
Satin Insert
21M

Santoprene™
Insert
21S

Wood Insert
21W

With Raised
Band
23M

Plain
25M

Plain with Two
Grooves
27M

Piet Finish Codes
BHMA Finish

Piet Code*

Description

630

Satin Stainless Steel

629

Bright Stainless Steel

N/A

Wood insert

N/A

Black (Santoprene™ or leather insert)

N/A

Brown (leather insert)

N/A

No Insert

*Code used to specify Piet Collection finishes only. Use available finishes list to specify desired finish when ordering.

Piet Lever Descriptions & Available Finishes
Lever Designation

Lever Description

Available Finishes (as ordered)

21G

Grooved Insert

292929 or 303030

21L

Leather Insert

29BK29, 29BN29 or 30BK30, 30BN30

21M

Metallic Insert

293029** only

21S

Santoprene Insert

29BK29 or 30BK30

21W

Wood Insert

29BH29 or 30BH30

23M

Raised Band

290029, 300030 or 290030**

25M

Plain

290029 or 300030

27M

Two Grooves

290029 or 300030

**Two-tone finish - grip of lever is 630, balance of lever is 629. Escutcheon finish will be 618.

Ordering Examples
Trim Only
Quantity
2

Trim/Function
21M910

Lever Finish
293029

Hand
RHR

In this example the escutcheon finish will be supplied in 618.

Exit Device with Trim
Quantity

Exit Device

Trim/Function

Lever
Finish

Exit Bar
Finish

Hand

Cylinder
Option

Door
Thickness

Optional
Strike

Door Width

ED5600LN

21W9M10

30BH30

630

LHR

D200

SB214

W048

ED5000.58
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Helpful Terms
ED5000
Abrasive Coat
Hard granular material applied to
provide a non-slip tactile surface for
the visually impaired.

Inactive Door
In a pair of doors, the door that is
inoperable from the trim side.

Active Door
In a pair of doors, the door that is
operable from the trim side.

Latchbolt
A lock component that has a beveled
end and projects into a strike, holding
the door in a closed position.

Astragal
A vertical member applied to one or
both sides of a pair of doors at the
meeting edges. The astragal closes the
gap between the two doors.

Mullion
A fixed or removable vertical member
that divides a door opening and
provides a latch surface for a pair of
rim exit devices.

Coordinator
A device used on a pair of doors to
ensure that the inactive door closes
before the active door.

Open Back Strike
For mortise exit devices, used on the
inactive door (usually the vertical rod
door) of a pair of doors that swing
in the same direction. It permits
the inactive door to open or close
independently.

Deadlocking Latch
A supplemental latch that
automatically deadlocks the latchbolt
when pressure is applied to it.
Dogging
A mechanism that allows the latchbolt
to remain retracted, permitting the
door to operate as if it were a pushpull; it cannot be used on fire-rated
exit devices.
Double Egress
A pair of doors of the same hand
that swing in opposite directions,
commonly found in corridors.
Dummy Trim
Trim only. Usually used on the inactive
door of a pair of doors for design
balance.
Exit Device (Panic Hardware)
A door locking device with a pushpad
or crossbar which, when pressed,
allows instant exit (egress).
Fire Exit Hardware
An exit device listed by an
independent testing laboratory as
meeting panic, fire and hose stream
test standards; used on fire-rated
openings.
Hand
The direction a door swings.

Reversible
Pertains to a product that may be
changed in the field to accommodate
any hand of the door.
Shim Kit
Pieces of metal that permit mounting
of an exit device on a door that has
a surface projecting vision light (glass
bead) molding.
Split Astragal
An astragal that is split through the
middle on a pair of doors, allowing
both doors to operate independently.
Threshold
A strip fastened to the floor beneath a
door. It serves as a stop, prevents heat
loss, and provides a strike location for
latching the bottom rod of a vertical
rod exit device.
Trim
A knob, lever, pull, or thumbpiece
used on the outside of an exit device
door to control access to an area.
Universal Exit Device
An exit device that may be used on
doors of either hand without any
modifications.

Keying and Cylinder Terms
Blockout Cylinder
A cylinder which allows all keys to be
temporarily blocked from operating. It
is set by a blockout key.
Concealed Key Control (CKC)
The marking of standard key symbols
on a cylinder in a location that is not
visible once the cylinder is installed.
Construction Master Keying (CMK)
A cylinder preparation that allows
temporary access by construction
personnel.
Control Key
A key used to remove and install
interchangeable cores.
Cylinder
A lock component containing the
combination that determines which
keys will operate.
Security Cylinder
A cylinder which provides extra
resistance to picking and unauthorized
duplication of keys.
Interchangeable Core (IC)
A cylinder which can be removed and
installed quickly with a control key by
non-skilled personnel when rekeying is
required.
Key Symbol
A letter/number combination in
standard industry format (e.g., 1AA,
AA1, etc.) which indicates exactly how
a key or cylinder fits into a keying
system.
Keyway
The opening in a cylinder plug through
which the key enters.
Master Keying
Preparation of a cylinder to operate
with keys of different levels of access.
Visual Key Control (VKC)
The marking of standard key symbols
on keys and on the visible portion of
the front of a cylinder.

ED5000.59
45063-8/15

How to Specify
ED5000
Suggested Specification for Panic and Fire-Rated Exit Devices
Exit devices shall be ED5000 Series Pushpad Exit Devices as manufactured by Corbin Russwin Architectural Hardware.
The exit device chassis shall be cold forged steel, electroplated for corrosion resistance, and shall be architecturally finished
brass, bronze or stainless steel. The pushpad mechanism shall be constructed of extruded aluminum and shall be scalped with
architecturally finished brass, bronze or stainless steel. The maximum projection shall be 3-1/4" when the pushpad is active and
2-3/4" when the pushpad is dogged down. Nylon bearings and stainless steel springs shall be used for long life and durability; only
torsion springs are acceptable. Rear and active case covers shall be wrought brass or bronze and shall be plated to match the exit bar.
Plastic or painted covers are not acceptable. Latchbolts shall be steel and shall incorporate a deadlocking latch for increased security.
Devices without deadlocking latches are not acceptable. Mounting screws shall be concealed to deter tampering. Devices shall be
closed on all sides with no pinch points. All exit devices shall be easily field sized to accommodate various door widths.
Panic-listed exit devices shall have single-point, one quarter turn hex key dogging standard. Optional cylinder dogging shall be
available on panic listed devices only. Devices with hex key dogging shall be easily field converted to cylinder dogging. Panic-listed
devices shall be available less dogging.
Trims shall be through-bolted with concealed fasteners. Escutcheon and pull type trims shall be constructed of brass or bronze. All
lever trims shall use cast or forged levers. On trims with cylinders, the mechanism that locks and unlocks the trim shall be housed in
the trim and not in the active case of the exit device. Rim and vertical rod lever trims shall be Free Wheeling with clutch mechanism
allowing lever to rotate 60° when locked to prevent vandalism. Lever trims shall match those on Corbin Russwin Mortise and
Cylindrical Locksets.
Exit devices and trims shall be furnished in BHMA standard architectural finishes.
Exit devices shall be listed by Underwriters Laboratories (UL) for safety as panic hardware. Fire-rated devices shall be listed for A label
and lesser class doors.
Certification:
ANSI A156.3, Grade 1
Devices, trims and cylinders shall be from one manufacturer.
Devices and 900 series trim shall carry a five-year limited warranty.
Electronic components shall carry a two-year limited warranty.

ED5000.60
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

How to Specify
ED5000
Suggested Specification for Delayed Egress Exit Devices
Delayed egress exit devices shall be ED4000/ED5000 series (rim, SecureBolt®, mortise or concealed vertical rod) with the “D” suffix,
manufactured by Corbin Russwin Architectural Hardware.
The delayed egress exit device secures the door in the locked mode. Depressing the pushpad for less than three seconds will sound the
device nuisance beep without initiating the alarm. Depressing the pushpad longer than three seconds will initiate an irreversible local
audible beeping tone and allow the device to release for egress after 15 seconds (or 30 seconds may be accepted by local jurisdiction)
and sound the alarm. The alarm will continue until reset by the mechanical key switch located on the device.
Devices shall be 24 volts DC.
The exit device chassis shall be cold forged steel, electroplated for corrosion resistance, and shall be architecturally finished brass,
bronze or stainless steel. The pushpad mechanism shall be constructed of extruded aluminum and shall be scalped with architecturally
finished brass, bronze or stainless steel. The maximum projection shall be 3-1/4" when the push pad is active and 2-3/4" when the
push pad is depressed. Nylon bearings and steel springs shall be used for long life and durability. Active case and alarm end cover
shall be wrought brass, bronze or stainless steel and shall be plated to match the exit bar. Painted or plastic covers or end caps are
not acceptable. Latch bolts shall be steel and shall incorporate a deadlocking latch for increased security. Devices without deadlocking
latches are not acceptable. Mounting screws shall be concealed to deter tampering. Devices shall be closed on all sides with no pinch
points. Device active cover and end cap attaching screws shall be security Torx® pin.
Trims shall be through-bolted with concealed fasteners. Escutcheon and pull-type trims shall be constructed of brass, bronze or
stainless steel. All lever trims shall use cast or forged levers. On trims with cylinders, the mechanism that locks and unlocks the trim
shall be housed in the trim and not in the active head of the Exit Device. Rim and vertical rod lever trims shall be Free Wheeling with
clutch mechanism allowing lever to rotate 60° when locked to prevent vandalism. Lever trims shall match those on Corbin Russwin
mortise and cylindrical locksets.
Devices shall be listed by UL/cUL as Controlled Exit Panic Devices or Special Locking Arrangement and meet all requirements for
NFPA 101.
Certification:
ANSI 156.3, Grade 1/ANSI 156.24
UL/cUL FUKD/FUKD7 - Controlled Panic Device
UL/cUL FWAX/FWAX7 - Special Locking Arrangements
Exit devices, trims and cylinders must be from one manufacturer.
Exit devices and heavy-duty trims shall have a five-year warranty. Electronics shall have a two-year warranty.

ED5000.61
45063-8/15

Notes
ED5000

ED5000.62
Copyright © 2000-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45063-8/15

Notes
ED5000

ED5000.63
45063-8/15

In U.S.
Corbin Russwin
Architectural Hardware
225 Episcopal Road
Berlin, CT 06037
Phone: 800-543-3658
Fax: 800-447-6714
corbinrusswin.com
In Canada
ASSA ABLOY Door
Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario
Canada L4K 4T9
Phone: 800-461-3007
Fax: 905-738-2478
www.assaabloy.ca

For more information regarding Corbin Russwin Locksets,
Exit Devices, Door Controls and Key Systems, contact your
authorized Corbin Russwin Distributor or Sales Representative.

ElectroLynx®
As part of their promise to provide innovative, fast and effective high security solutions to their customers, certain ASSA ABLOY Group brands
offer ElectroLynx®, a universal quick-connect system that simplifies the electrification of the door opening.
ElectroLynx® is a registered trademark of ASSA ABLOY Inc.
MicroShield®
As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the MicroShield® technology,
a silver-based antimicrobial coating designed to inhibit the growth of bacteria. MicroShield® is a registered trademark of Yale Security Inc.,
an ASSA ABLOY Group company.

Corbin Russwin and Design®, SecureBolt® and Muséo®are registered trademarks of Corbin Russwin, Inc., an ASSA ABLOY Group company. PathLite™ and Vineyard™ are
trademarks of Corbin Russwin, Inc., an ASSA ABLOY Group company. Other products’ brand names may be trademarks or registered trademarks of their respective owners
and are mentioned for reference purposes only. These materials are protected under US c opyright laws. All contents current at time of publication. Corbin Russwin, Inc.,
an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2000, 2014
Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is
prohibited.

45063-8/15

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Instance ID                     : uuid:d31b7cfb-5408-c840-a737-ea04b04b97ce
Document ID                     : xmp.did:8B2F87EF2E2068118C14820511C8DDB9
Original Document ID            : adobe:docid:indd:91dc23f0-47af-11df-87eb-821b305f9bbd
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:C7DE6674072068118C14820511C8DDB9
Derived From Document ID        : xmp.did:ABA6B577072068118C14A2591E474C96
Derived From Original Document ID: adobe:docid:indd:91dc23f0-47af-11df-87eb-821b305f9bbd
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:B621DDD59F2068118C14CD9C50330A97, xmp.iid:B721DDD59F2068118C14CD9C50330A97, xmp.iid:FA071DF7912168118A6D9ADFC217801D, xmp.iid:F2E66C91932168118A6D9ADFC217801D, xmp.iid:BF70A6B3952168118A6D9ADFC217801D, xmp.iid:61EDAD5ED22068118C14F87DBA7EBF10, xmp.iid:DDE1B138092068118083A3180D439947, xmp.iid:92C6260ABD2168118083A3180D439947, xmp.iid:A7AD0445C02168118083A3180D439947, xmp.iid:0660BA0DC12168118083A3180D439947, xmp.iid:D557ED64C42168118083A3180D439947, xmp.iid:38308FD5C52168118083A3180D439947, xmp.iid:F77F1174072068118C14C50F6E3D77B0, xmp.iid:F9777674072068118C14C50F6E3D77B0, xmp.iid:3FEDD319082068118C14C50F6E3D77B0, xmp.iid:EB0CC24A092068118C14C50F6E3D77B0, xmp.iid:F6B93CD5092068118C14C50F6E3D77B0, xmp.iid:CA4089D8092068118C14C50F6E3D77B0, xmp.iid:C2CA8B210A2068118C14C50F6E3D77B0, xmp.iid:40442D38D22068118C14950948317A34, xmp.iid:08835EAED32068118C14950948317A34, xmp.iid:E5AD71DDD32068118C14950948317A34, xmp.iid:E29F117AD62068118C14950948317A34, xmp.iid:F8373862D72068118C14950948317A34, xmp.iid:7BEB2881D72068118C14950948317A34, xmp.iid:702061DB622068118C1489BA1318BF65, xmp.iid:F58AE920642068118C1489BA1318BF65, xmp.iid:CEC860A13B2068118A6DF0D1BB30A29A, xmp.iid:74613FC0082068118083BEF00459E7FC, xmp.iid:2D349161092068118083BEF00459E7FC, xmp.iid:E6E644E4092068118083BEF00459E7FC, xmp.iid:0ED4968E092068118C14B45509025D6E, xmp.iid:4C3489D5BE2268118C14B45509025D6E, xmp.iid:C3906B87382368118C14B45509025D6E, xmp.iid:AE8B5C364D2368118C14B45509025D6E, xmp.iid:69FE4EF64120681188C6DA3047E4B33A, xmp.iid:F02216384320681188C6DA3047E4B33A, xmp.iid:89CDFBBE4320681188C6DA3047E4B33A, xmp.iid:C747CD98492068118C14F9835D28D9A5, xmp.iid:F0328C8A592068118C14ACFE273561B3, xmp.iid:7D52ED8C072168118C14ACFE273561B3, xmp.iid:06D97815082168118C14ACFE273561B3, xmp.iid:458B94B0122068118C14FF17C01123BB, xmp.iid:A6C9BF47712068118083EA8B34CECFBA, xmp.iid:CDBE9649722068118083EA8B34CECFBA, xmp.iid:5D8BF673082068118083BB707E84FC74, xmp.iid:D22A2C9F872068118A6D9D5A117C9232, xmp.iid:5F8A9F70882068118A6D9D5A117C9232, xmp.iid:0D7533FB0F2068118C14BD07E612B845, xmp.iid:FCF6B380B22068118C14BD07E612B845, xmp.iid:2DBC9482072068118A6DC2A3A56445D2, xmp.iid:F45BD563402068118C14A63A9AC46102, xmp.iid:72CF0820662068118C14A63A9AC46102, xmp.iid:78B99DC3762068118C14A63A9AC46102, xmp.iid:7D0C493EA72068118C14A63A9AC46102, xmp.iid:1F7FADE4172068118A6D88EB4C1F3997, xmp.iid:4F27BAE6312068118A6DB048790117D5, xmp.iid:FEC631D60D206811958DAAEC0E9C9B24, xmp.iid:DF8016DD4C2068118A6DFB5E317BE335, xmp.iid:F5F99F0AC82068118A6DFB5E317BE335, xmp.iid:468F0243CE2068118A6DFB5E317BE335, xmp.iid:66450B7AD52068118A6DFB5E317BE335, xmp.iid:7FA8E724322068118A6DA30853B3F465, xmp.iid:A55210FA79226811808390656DAB46A4, xmp.iid:B5A0B8830720681188C6DB25CD606A8D, xmp.iid:B15457B1DA2168118A6DD2256E5173B8, xmp.iid:64F4BA51DE2168118A6DD2256E5173B8, xmp.iid:C20F22A9E92068118C14AE2B13C11816, xmp.iid:B853AAC4F32068118C14AE2B13C11816, xmp.iid:F00EFC8D862068118A6DB34391BDF184, xmp.iid:886A2EA81A2068118C148647B1BAC837, xmp.iid:1AE9C29E82206811994C8D15F9FC2AAC, xmp.iid:646D9B669A206811994C8D15F9FC2AAC, xmp.iid:91AD0BFCBF20681188C6D031CD261EB5, xmp.iid:C767BBF2C320681188C6D031CD261EB5, xmp.iid:24C7A7336A20681188C692CF42AB09B1, xmp.iid:653C6EFF842168118A6DDDBA11317D20, xmp.iid:DB5E469FFC2168118A6DDDBA11317D20, xmp.iid:4B73AB9A212068118A6DA856AFDC2195, xmp.iid:80856B00582068118C14B86832359512, xmp.iid:8AF35144782068118C14B86832359512, xmp.iid:C9AC7836932068118C14B86832359512, xmp.iid:ED7F1174072068118C14A2591E474C96, xmp.iid:ABA6B577072068118C14A2591E474C96, xmp.iid:4BC0E39E072068118C14A2591E474C96, xmp.iid:C7DE6674072068118C14820511C8DDB9, xmp.iid:8B2F87EF2E2068118C14820511C8DDB9, xmp.iid:CD9C90C6D420681180839D03B83E3B3C, xmp.iid:D24694E2F520681180839D03B83E3B3C, xmp.iid:746AA176732268118C14C6BFD6AD89D6
History When                    : 2010:07:29 12:23:59-04:00, 2010:07:29 12:23:59-04:00, 2010:08:07 08:39:08-04:00, 2010:08:07 08:50:37-04:00, 2010:08:07 09:05:56-04:00, 2010:08:10 12:44:44-04:00, 2010:09:07 15:07:26-04:00, 2010:09:11 12:57:12-04:00, 2010:09:11 13:20:19-04:00, 2010:09:11 13:25:56-04:00, 2010:09:11 13:49:50-04:00, 2010:09:11 14:00:09-04:00, 2010:09:11 15:10:24-04:00, 2010:09:11 15:10:25-04:00, 2010:09:11 15:15:03-04:00, 2010:09:11 15:23:34-04:00, 2010:09:11 15:27:26-04:00, 2010:09:11 15:27:32-04:00, 2010:09:11 15:29:34-04:00, 2010:09:29 09:15:58-04:00, 2010:09:29 09:26:26-04:00, 2010:09:29 09:27:45-04:00, 2010:09:29 09:46:27-04:00, 2010:09:29 09:52:56-04:00, 2010:09:29 09:53:48-04:00, 2010:10:04 13:32:32-04:00, 2010:10:04 13:41:38-04:00, 2010:10:06 11:42:57-04:00, 2010:10:07 12:14:17-04:00, 2010:10:07 12:18:48-04:00, 2010:10:07 12:22:27-04:00, 2010:10:08 16:28:23-04:00, 2010:10:13 14:44:14-04:00, 2010:10:14 09:11:50-04:00, 2010:10:14 11:39:53-04:00, 2010:10:16 09:41:28-04:00, 2010:10:16 09:50:28-04:00, 2010:10:16 09:54:14-04:00, 2010:10:19 08:57-04:00, 2010:10:28 12:33:33-04:00, 2010:10:29 10:30:28-04:00, 2010:10:29 10:34:17-04:00, 2011:01:08 12:34:35-05:00, 2011:01:13 13:34:08-05:00, 2011:01:13 13:41:20-05:00, 2011:01:15 08:29:38-05:00, 2011:03:15 19:43:36-04:00, 2011:03:15 19:49:28-04:00, 2011:03:21 13:00:48-04:00, 2011:03:23 15:09:38-04:00, 2011:04:06 07:57:03-04:00, 2011:04:07 10:54:27-04:00, 2011:04:07 15:24:33-04:00, 2011:04:08 09:12:29-04:00, 2011:04:08 14:59:30-04:00, 2011:06:09 19:39:39-04:00, 2011:07:15 13:46:41-04:00, 2011:08:09 17:52:11-04:00, 2012:02:28 19:03:30-05:00, 2012:03:01 14:04:13-05:00, 2012:03:01 14:48:44-05:00, 2012:03:01 15:40:23-05:00, 2012:03:13 16:51:21-04:00, 2012:04:11 13:08:09-04:00, 2012:04:16 11:10:45-04:00, 2012:12:22 09:18:56-05:00, 2012:12:22 12:18:04-05:00, 2013:01:02 10:18:49-05:00, 2013:01:02 11:31:10-05:00, 2013:02:16 10:42:33-05:00, 2013:03:15 11:49:25-04:00, 2013:03:18 14:54:53-04:00, 2013:03:18 17:45:07-04:00, 2013:04:02 11:56:01-04:00, 2013:04:02 12:24:24-04:00, 2013:07:02 21:35:12-04:00, 2013:07:29 20:35:45-04:00, 2013:07:30 10:52:02-04:00, 2014:08:05 15:17:44-04:00, 2014:08:06 18:38:15-04:00, 2014:08:07 11:38:29-04:00, 2014:08:07 14:51:21-04:00, 2015:06:01 11:12:42-04:00, 2015:06:01 11:12:48-04:00, 2015:06:01 11:13:54-04:00, 2015:07:27 14:50:33-04:00, 2015:07:27 14:50:35-04:00, 2015:07:30 12:19:34-04:00, 2015:07:30 16:16:34-04:00, 2015:08:17 12:58:57-04:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Create Date                     : 2015:08:20 09:29:30-04:00
Modify Date                     : 2015:08:20 09:35:37-04:00
Metadata Date                   : 2015:08:20 09:35:37-04:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 8779 bytes, use -b option to extract), (Binary data 10061 bytes, use -b option to extract)
Doc Change Count                : 4810
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 64
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools

Corbin Russwin ED5000 Series Aadss1004819

Navigation menu

Versions of this User Manual:

Views

Navigation