Corbin Russwin Key Systems Aadss1004918

User Manual: Corbin Russwin Key Systems Catalog

Open the PDF directly: View PDF .
Page Count: 54

Download
Open PDF In Browser	View PDF

Key Systems
Cylinders and Keys

Applications

Overview
Key Systems

Key Systems
Table of Contents
Designing Master Key Systems....... 3
Key Wizard®............................. 4
How to Order Cylinders............ 5
Cylinder and Key Stamping....... 6
Temporary Access..................... 7
Conventional Cylinders............. 8
Interchangeable Core.............. 14
Security................................... 17
Master Ring............................ 19
Pyramid.................................. 21
Bump Resistant Cylinders........ 28
Key Blanks.............................. 29
Keyways................................. 31
Mortise Cylinder Cams............ 40
Cylinder Accessories................ 41
Plug Diameters/Quick Codes... 44
Service Equipment.................. 46
Policies and Procedures........... 50

Applications
To provide the desired level of security, even the finest architectural hardware requires a
properly designed and maintained master key system.
The keying system is the “software” of a building's security. As shown in the schematic
below, it turns each hardware product into an access control device.
The choice of cylinder mechanism must be planned together with the keying system.
The variety of mechanisms available from Corbin Russwin offers the right balance of
security, convenience and expansion capability for every job.

A
Grand Master

How to Establish Key Systems... 51

www.corbinrusswin.com

AA
Master
Maintenance

AB
Master
Perimeter

AC
Master
Administrator

AD
Master
Doctors’ Offices

AE
Master
Nursing

AF
Master
Food Service

AA1
Electrical
Closets

AB1
Building
Entrances

AC1
Chief of
Staff

AD1
101

AE1
2nd Floor

AF1
Kitchen

AA2
Phone
Closets

AB2
Exit Alarms

AC2
Personnel

AD2
102

AE2
3rd Floor

AF2
Cafeteria

AA3
Heating and
Air Cond.

AB3
Gates

AC3
Accounting

AD3
103

AE3
4th Floor

AA4
Janitor
Supplies

AB4
Parking

AC3
Accounting

AD4
104

AE4
5th Floor

AA5
Janitor closets
Restrooms

AF3
Food Storage

AE5
6th Floor

SKD1
Pharmacy

2
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Designing Master Key Systems

Cylinders and Keys
Key Systems

Step 1
Determine the type of locking system
• Conventional “open & restricted keyways”
- Not contract controlled
• Patented locking system
- A notice of acceptance will be
required between Corbin Russwin
and Owner
- Factory-based system
- Key blank distribution restrictions are
in place
• Security (secondary locking mechanisms,
example; Pyramid Security)
• High security (same as Security plus
UL437 – example; Pyramid High
Security)
• Standalone access control locking
devices (at door wiring, example;
Access 800)
- To facilitate multiple users through
common doors
• Integrated locking systems (hard wired
into access control systems)
Step 2
Establish the level of the master key
system. The higher the level the less
secure.
• Level two – “Simple Master Key system”
- Change key, and master key only
• Level three – “Grand Master Key system”
- Change key, master key, and Grand
Master Key
• Level four – “Great Grand Master Key
system”
- Change key, master key, Grand
Master Key, and Great Grand
Master Key
• Levels higher than four are not
recommended for security reasons
- With more levels, additional master
pins in each chamber of the cylinder
would be required, and with the
additional master pins the possibility
of unauthorized key interchanges
could occur
*See pages 50-52 on How to Establish Key
Systems.*
Step 3
Establish key hierarchy, key issuing
policies and procedures, and
administrative disciplines.
• Who, if anyone is authorized to carry
the top master key?
• Who carries master keys and change keys?
- Does every employee receive a key?

• What disciplinary action(s) is being put
in place for violations?
- Fines or Deposits
> Lost keys
> Keys not returned
- Will there be a key receipt required?
> Where will that be kept?
• Who is the systems administrator?
- Authorized to purchase
- Responsible for Key Control
Administration
• Who is the Key Control Administrator?
- Maintain key control software &
all transactions
Step 4
System Layout
• Helpful Hints
- KISS “Keep It Simple System”
> Do not use the term sub-master
(not unless it’s level 6 and higher)
• Lowest level possible
• Key to the building security objectives
NOT to the people
- Determine if the system is to be
designed for Security or Convenience
• No cross keying, especially with patented
locking systems and higher
• Key alike within master key groups as
much as possible
- Avoid top-heavy systems (example;
few change keys used under masters)
• Has the right function of lockset been
selected?
- Storeroom vs. Classroom vs. Entry
- Single cylinder vs. double cylinder
> If double cylinder, how is the
inside cylinder to be keyed?
• Provide adequate quantity of keys
- Top Master keys “limit the number of
these to only a few”
- Master keys “also limit the number
these”
- Change keys per key set and/or per
keyed alike sets
- Special operating keys
> Control keys “limit the number
of these”
Separate the internal departments
into sectors, example are:
• Perimeter
- Including all exterior doors, roof
surfaces, gates and fences, and
adjacent buildings.
• Operations
- Sensitive areas crucial to daily
operations, such as plant engineering,
security and mechanical operations.

• Management
- Areas that are vital for daily business
activities, primarily human resources,
administration, executive offices, IT,
sales, and accounting.
• Services
- Areas that provide employees and
visitors with services, such as
restrooms, medical treatment areas,
housekeeping, food service, retail
(unless it's a leased outside source).
• Unique Applications
- Door openings requiring access
control hardware where key override
is required, or any other special
application which would be unique.
• Tenants
- Any tenants that are not part of the
building.
Step 5
Servicing & Maintenance
• In-house or outside locksmith
- Ensure proper training
- Establish key cutting log
- Establish service request procedures
• Service equipment
- Key kit
- Code cutter that complies with
systems depths & spacing
specifications
- Locksmithing tools, fixtures &
accessories
• Establish stock levels & requirements to
avoid misuse of multi-section key blanks
- Additional cylinders ready for
emergencies
- Additional key blanks (of all keyways)
• Who or where are the key blanks going
to be kept?
• Who is authorized to cut keys?
- What form of work order will be used
to authorize cutting of keys?
- Who will sign the work order?
- What records will be kept & where?
• What type of reports will be required?
- Overdue keys
- Miss-cut keys
> Who receives the reports?
• Once a key has been cut, what
instructions are given to the recipient?
- Key receipt recommended
• Ensure that all transactions are recorded
by the Key Control Administrator
• ENFORCEMENT FROM THE START!
SUPPORT AND BACK THOSE WHO
ARE RESPONSIBLE FOR MAINTAINING
AND SERVICING THE SYSTEM.
3

45078-9/15

Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

Key Wizard®
Key Systems
Key Management Software
Advantages

Outlook® type of layout.

A key management software program
is essential for any type of organization.
Keeping track of the key holders in
a master key system is critical for
maintaining key control and ensuring the
security and integrity of the system.
Key Wizard by Corbin Russwin was
designed to provide a user-friendly tool
for facility end users to track detailed
information concerning their keying
system. It offers improvements over
existing key management software by
utilizing clutter-free and easily navigated
screens. This system uses a Microsoft®

Key control for a facility is maintained
by adopting a complete system of
policies, procedures, record keeping and
specialized products. A comprehensive
key management software program is one
aspect of a complete key control system.
Key Wizard by Corbin Russwin provides
the facility with accurate information
concerning keys, key holders, hardware
locations, master key systems, overdue
keys and maintenance service schedules,
all of which can be customized.

Features:
• Free technical support and free software upgrades for one year
• Customized query, report and search capability
• Comprehensive hardware listings for door locations
• Displays key holder photos and signatures for verification
• Clear, easy to read screens
• Automatic reminders for maintenance, back-ups and overdue
keys
• Network and standalone versions available
• Accurate key symbol sorting
• Audit trail tracks changes made to keyholders
• Printing of door number labels to ensure proper cylinder
installation
• Key authorization tracking

•
•
•
•

Computer System Requirements:

How to Order:

• 500 MHz processor or greater
• Windows 98, 2000, ME, NT, XP, Vista or 7
• 64 MB RAM
• CD Drive
• Mouse pointing device
• 70 MB hard disk space

All Key Wizard programs are licensed specifically to each facility
end user. Special online ordering procedures apply. The following
information is required for each system:

Demo Version
Demo versions are available. Demos can be downloaded from the
Corbin Russwin website at http://www.corbinrusswin.com or
www.keywizard.net

•
•
•
•
•
•

Customized key receipts and authorization forms
Tracking of loaned keys and key deposits
Stores maintenance service history records
Can manage multiple end users and multiple key systems for
most manufacturers
Importing of key systems, keyholders and locations
Exporting of key systems and locations
Global key search across multiple master key systems
Multi-level password protection
Download of key bittings to ITL9700 Code machine
Pinning Calculators

End User Facility Name
End User Contact Individual
Mailing Address
Phone Number
Key Wizard Technical Support:
1-800-610-1706

4
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Numbering Scheme Overview

How to Order Cylinders

Key Systems
10

Cylinder Type
10
11
12
13
14
15
16
17
20
21
22
23
24
25
26
27
28
29
30
33
35
36
37
42
44
45
46
47
80
85
86

Mortise
Flex Head Mortise
Concealed Shell
Mortise
Thumbturn Mortise
Dummy Mortise
Access 3 Mortise - AP
Access 3 Mortise - AS
Access 3 Mortise - AHS
Knob/Lever
Continental Knob
Competitor Knob/Lever
Access 3 Competitor
Knob/Lever
Competitor Keyways
Access 3 KIK/KIL - AP
Access 3 KIK/KIL - AS
Access 3 KIK/KIL - AHS
Access 3 Competitor
KIL - AS
Access 3 Competitor
KIL - AHS
Rim
Thumbturn Rim
Access 3 Rim - AP
Access 3 Rim - AS
Access 3 Rim - AHS
Special Application
DL2200, DL3200
Access 3 DL2200/
DL3200 - AP
Access 3 DL2200/
DL3200 - AS
Access 3 DL2200/
DL3200 - AHS
IC-Core Only (LFIC)
Access 3 IC Core - AP
Access 3 IC Core - AS

–

118

Mechanism
0
1
2
3
4
6
7
8
9

Standard
Security
Pyramid
IC Pyramid
Cylinder (LFIC)
SFIC Housing
Master Ring
LFIC Housing
IC Complete
Cylinder (LFIC)
IC Security
Cylinder (LFIC)

Function
0
1
2
3
4
5
6

Standard
Hotel
Blockout
Classroom
Brink CW
Brink CCW
Obsolete
Crossbar ED6200
7 Pyramid Security
8 UL IC Housing
Access 3

–

A01

–

Length
(Mortise Cylinder) Non-IC
100 1" (25mm)
118 1-1/8" (29 mm)
114 1-1/4" (32 mm)
138 1-3/8" (35 mm)
112 1-1/2" (38 mm)
134 1-3/4" (44mm)
200 2" (51 mm)
214 2-1/4" (57 mm)
212 2-1/2" (64 mm)
234 2-3/4" (70 mm)
300 3" (76 mm)
314 3-1/4" (83 mm)
312 3-1/2" (89 mm)
334 3-3/4" (95 mm)
(Mortise Cylinders) IC
114 1-1/4" (32 mm)
138 1-3/8" (35 mm)
112 1-1/2" (38 mm)
134 1-3/4" (44mm)
200 2" (51 mm)
214 2-1/4" (57 mm)
212 2-1/2" (64 mm)

–

Finish x Options*

Cam
A01
A02
A03
A04
A05
A06
A07
A61
A62
A63
A64
A65
A92
A93

Cloverleaf
Straight
Adams Rite® MS
DL4000 Series
Adams Rite 4070
Schlage® Cloverleaf
DL4100 Series
New MR Cloverleaflocks made after 5/93
MR Straight
Large MR Short
Large MR Long
Old MR Cloverleaf locks made prior to
5/93
Exit Grip Trim 01, 02
Obsolete Deadlocks:
Corbin® 610 Series and
Russwin® 1403 Series

Pins

Keyway

6 Standard
7

752
852
981
A
DH
N
X
Z
Access 3
Pyramid

(Rim Tailpiece)
058 5/8" (16 mm)
114 1-1/4" (32 mm) IC
138 1-3/8" (35 mm)
178 1-7/8" (48 mm) IC
178V 1-7/8" (48 mm) vertical IC
200 2" (51 mm)
200V 2" (51 mm) vertical
318 3-1/8" (78 mm) IC
312 3-1/2" (89 mm)
312V 3-1/2" (89 mm) vertical

87
Access 3 IC Core - AHS
2300 RFC Padlock
*For cylinder options, see pages 43-44
Finish
Description
Bright Brass
Satin Brass
Bright Bronze
Satin Bronze
Dark Oxidized Satin Bronze, Oil Rubbed
Dark Oxidized Satin Bronze, Equivalent
Bright Nickel Plated
Satin Nickel Plated
Flat Black Coated
Bright Chromium Plated
Satin Chromium Plated
Bright Stainless Steel
Satin Stainless Steel
Black Oxidized Bronze, Oil Rubbed

Specify
605
606
611
612
613
613E
618
619
622
625
626
629
630
722

5
45078-9/15

Cylinder and Key Stamping

VKC and CKC

Key Systems
Visual Key Control (VKC)
For Greater Convenience
The key symbol is stamped on the plug
face or other visible portion of the front of
the cylinder. (VKC is available on all keys,
but not available on Security, CK4400
Series Lockset or Pyramid cylinders.)

Visual and Concealed Key Control
With these options, keys and/or cylinders
are stamped with their respective keyset
symbol, so lock mix-ups during installation
or key mix-ups afterwards are less likely
to happen – and easier to straighten out
if they do. Lost keys are also easier to
replace. The coded information on the
cylinder tells you how the cylinder is keyed,
thereby eliminating trial and error.
For example, the symbol AA1 shown in
the illustration identifies the lock to be
operated by grand master key A, master
key AA and change key AA1. Upon
written authorization from the building
owner to an authorized Corbin Russwin
Distributor, a bitting list can be furnished
for each job to translate the symbols into
key bittings.

Concealed Key Control (CKC)
For Greater Security
For greater security, specify CKC on the
cylinders. The key symbol is stamped in
a concealed location, such as the rear of
the cylinder. It is not visible to the general
occupants of the building but can be
accessed by authorized personnel upon
removing the cylinder from the lockset.

AA1

If a key is lost, it can easily be replaced by
referring to the symbol on the cylinder and
the bitting on the bitting list. VKC is not
available on Security or Pyramid cylinders.

The following codes and definitions have been established for specifying cylinder and key stamping:
Quick Code

Definition

VKC0

No keyset, registry number, keyway, nor bitting stamping on any keys. Includes master keys and change keys. (Keys will be tagged.)

VKC1

Master keys stamped with their keyset symbol and registry number. Change keys stamped with their keyset symbol and keyway.*
(Standard for high security and security cylinders.)

VKC2

Master Keys stamped with their keyset symbol and registry number. Change keys stamped with their keyset symbol and keyway.*
Cylinders stamped with their keyset symbol on the face of the plug. (Not available for high security or security cylinders.)

VKC3

Master Keys stamped with their registry number. Change keys stamped with their bitting, keyway* and system. Cylinders stamped with
their keyset symbol on the face of the plug. (Not available for high security or security cylinders.

CKC2

Master keys stamped with their keyset symbol and registry number. Change keys stamped with their keyset symbol and keyway.*
Cylinders stamped with their keyset symbol in a concealed location.

CKC3

Master keys stamped with their registry number. Change keys stamped with their bitting, keyway* and system. Cylinders stamped with
their keyset symbol in a concealed location. (Not available for high security, or security cylinders.)

*Keyway will NOT be stamped on the keys for security or high security cylinders, nor restricted or protected keyways unless specifically requested as per the
purchase order. (KB18, KB19, KB28 or KB90 series)

6
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Temporary Access

Construction Keying
Key Systems

CONSTRUCTION
MASTER

Construction Master Keying
Construction Master Keying (CMK) is a Corbin
Russwin keying option that provides the extra
security needed in the transition from construction
of a building or complex to completion.
The construction master key operates all Corbin
Russwin cylinders while the building is under
construction. Upon completion of the construction
phase, it can be voided without removing the
cylinders from the locks, simply by turning the
change key in each cylinder. Interchangeable
core jobs with construction master keying further
require a construction control key to install and
remove cores during the construction phase.
The permanent master and change keys for the
system are always packed and shipped separately,
and the order must include the names and
addresses of individuals to whom the construction,
permanent master and change keys should be
sent.
This feature is NOT available on Security or
Pyramid cylinders.
SKD Caution
Unless otherwise specified, SKD sets will be
construction master keyed. When construction
master keying is established for SKD sets, Corbin
Russwin issues a separate SKD CMK key as well as
an SKD CMK Control key if required.
How to Order CMK
To order locksets and/or cylinders with the
construction master key feature, the quick code
CMK should be indicated as an option.
Temporary Construction Cores
Lockable
A more secure method of construction keying
for interchangeable core hardware is the use of
temporary construction cores. Corbin Russwin
recommends this method of construction keying
for IC jobs.
Hardware is furnished with construction cores
that are keyed alike to a combination unrelated
to the permanent system’s master key. When
the building is turned over to the owner, the
permanent cores are installed and the temporary
construction cores can be returned to Corbin
Russwin for credit.

The IC temporary construction cores are available
in red, blue and green. The color options
enhance the user's ability to easily control access
to different locations on a construction site, or
identify different locations for specific keying
applications.
How to Order Lockable
For 6-pin, use quick code CT6
IC 6-pin with Red temporary construction core (Red),
CT6R
IC 6-pin with temporary construction core (Blue), CT6B
IC 6-pin with temporary construction core (Green), CT6G
For 7-pin, use quick code, CT7
IC 7-pin with temporary construction core (Red), CT7R
IC 7-pin with temporary construction core (Blue), CT7B
IC 7-pin with temporary construction core (Green), CT7G
For Pyramid, use quick code CTP.
Note: Orders specifying only CT6 or CT7 without
the color designation will receive the Red IC
temporary construction core by default.
Examples:
ML2051 x LSA x 626 x RH x CT6
1080 x 114 x A01 x 626 x CTP
CL3355 x NZD x 626 x CT6B
1080-114-A01 x 626 x CT6G
Permanent cores must be ordered separately.
Disposable
Corbin Russwin offers two formats of disposable
temporary cores. These cores do not require keys
for their operation and no returns or credits are allowed.
Disposable cores are available for Corbin Russwin
large format interchangeable core (LFIC) housings
or for small format interchangeable core (SFIC)
housings. Please note that Corbin Russwin does
not provide permanently keyed SFIC cores.
How to Order Disposable
LFIC
For 6-pin, use quick code CT6D
For 7-pin, use quick code CT7D
For Pyramid, use quick code CTPD
Examples:
ML2051 x LSA x 626 x RH x CT6D
1080 x 114 x A01 x 626 x CTPD
Permanent cores must be ordered separately.
SFIC - Key-in-lever/knob locksets
For 6- and 7-pin, use quick code CTSD
SFIC - Mortise Locks and Exit Devices-Rim Cylinders
For 6-pin housing, use quick code CLS6
For 7-pin housing, use quick code CLS7

7
45078-9/15

Conventional

Mortise

Key Systems
Mortise Cylinders

Type

For use with all mortise locks and
DL3000 Deadlocks. IC: page 15.
Security: page 17. Master Ring: page 20.
Pyramid: page 24.

100 1"
1000
(5 pin only)
118 1-1/8"
(standard)

Length

Cam

Pins

Keyway

(see page 40)

5 (1" length only)

(see pages
31-39)

A01 Cloverleaf

6 (standard)

606

114 1-1/4"

A02 Straight

7 (available for
1-1/4"-3")

611

138
112
134
200
214
212

300 3"

A03 Adams Rite MS and
DL3000 Deadlock
A04 DL4000 Deadlock
A05 Adams Rite 4070
A06 Schlage® Cloverleaf
A07 DL4100
A62 MR Straight / 900 Series
Mullion
A92 Exit Grip Trim 01 & 02

314 3-1/4"

A93 Obsolete deadlocks:

312 3-1/2"

Corbin® 610 Series and
Russwin® 1403 Series

1-3/8"
1-1/2"
1-3/4"
2"
2-1/4"
1-1/2"

612
613
622
625
626
629

234 2-3/4"

Finish
605

630
722

334 3-3/4"

Flexible Head Mortise Cylinders

Type

Length

Cam

Pins

Keyway

Use Flexible Head mortise cylinders
only with sectional trim mortise locks.
The head is spring-loaded to adjust for
minor variations in door thickness. See
page 20 for Master Ring

1100

100 1" (6-pin std.)

(see page 40)

(see pages 31-39)

118 1-1/8"

A01 Cloverleaf

6 (standard)
7 (available for
1-1/4"- 1-1/2")

114 1-1/4"

A02 Straight

Finish
605
606
611
612
613
618
619
625
626
722

Concealed Shell Mortise Cylinders
Concealed shell cylinders are for
mortise locks using “Plug Only to
Show” escutcheon trim.

Type

Length

1200

100 1" (6-pin std.)

(see page 40)

118 1-1/8"

A01 Cloverleaf

6 (standard)

A02 Straight

7 (available only for
1-1/4"- 1-1/2")

114 1-1/4"

Cam

Pins

5 (1" length only)

Keyway

Finish

(see pages 31-39)

606
626

138 1-3/8"
112 1-1/2"

Length

Length is measured from behind the cylinder head to the
end of the cam.
For cam illustrations and applications, see page 40.

8
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Conventional

Mortise

Key Systems
Hotel Function Cylinders
Guest Key and all normal master keys
have limited rotation to retract
latchbolt only. Emergency Master Key
(EMK) and display key turn 360° to
operate deadbolt as well.
Brink Function Cylinders
The change key turns in only one
direction while the master key turns
in both directions. While it was
developed for the detention market,
the cylinder can provide a creative
solution to other security needs
when used in conventional mortise
locks. 6-pin only. Integration of these
cylinders must be planned from the
inception of a keying system.

Type

Number

Standard

1001-114-A01

Flexible Head

1101-118-A01

Concealed Shell

1201-114-A01

Remarks
Cylinders are 6-pin. Display and
Emergency Master Keys are cut
on 7-pin blanks

Not available with D1, D2, L1, L2, 752, 852 or A Class keyways. Order with A91 cam to accept discontinued Russwin®
“G” type long EMK.
Finishes: see Standard, Flexible Head and Concealed Shell Cylinder sections, page 8.
Application

Number

Remarks

Folger Adam NS400 Series x LEK

1004-118-A02

Clockwise

Folger Adam NS400 Series x LEK

1005-118-A02

Counterclockwise

Brink “CKS”

1004-118-A05

Clockwise

Brink “CKS”

1005-118-A05

Counterclockwise

Finishes: 605, 606, 611, 612, 613, 625, 626, 629, 630, 722

Cylinder for Obsolete Exit Device
For inside of obsolete Corbin® 3726
1/2 and 3727 1/2 and Russwin® 736
1/2 and 737 1/2 only. Cam rotation is
limited by steel pins on back of shell.

1006-118-A02 (6-pin only)
Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 629, 630, 722

Thumbturn Cylinders

Suffix cam number to basic cylinder number.
Example: 1300-118-A03
Function

Standard

Classroom function cylinders have a
pin to block cam rotation in the locking
direction. The pin may be installed on
either side of the cam, depending on
the hand of the door.

Classroom

Length

Basic Number

A02
(147F77)

A03
(111F55)

A93
(281F27)
N/A

1300-100-

•

1-1/8"

1300-118-

•

1-1/4"

1300-114-

•

N/A

1-3/8"

1300-138-

•

N/A

1303-100-

N/A

•

N/A

1-1/8"

1303-118-

N/A

•

N/A

1-1/4"

1303-114-

N/A

•

N/A

1-3/8"

1303-138-

N/A

•

N/A

Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 629, 630, 722

Dummy Cylinders

These cylinders may be used to fill an opening
left when mortise cylinder operation is no
longer desired.

Number

Length

1400-118

1-1/8"

1400-114

1-1/4"

1400-138

1-3/8"

Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 629, 630

9
45078-9/15

Conventional

Component (Key-in-Lever/Knob)

Key Systems
Component Cylinders
Finishes 606, 626

2000-031, 033, 034 or 037

Type

Tailpiece
031
031H
033

2000

2000-038

2000-052

2000-044

Lever
(Plug diameter)

Series
CL3100 Lever Trim
CL3300, CL3500, CL3800, CL3600 (June
2000 and after) Lever Trim - A6/N6/PR6

Tailpiece Part Number
(Length) 6-Pin

Tailpiece Part Number
(Length) 7-Pin

778F778 (.692")

778F768 (.536")

(.509”)

778F778 (.692”)

622F308 (.950")

682F298 (.794")

622F308 (.950")

682F298 (.794")

622F298 (1.106")

622F308 (.950")

682F298 (.794")

(.509")

G1055 ED Trim (Horizontal Tailpiece)

034

CL3400 (Lockset Series Obsolete)
CL3600 (Prior to June 2000), A5/N5

(.509")

CL3700

(.509")

CK4700

2000-031H

Knob
(Plug diameter)

(.509")

CK4300

033H

037

2000-051

(.509")

038

CL3800 (Obsolete 1993-1997 model)

(.509")

596F898 (1.056")

039

CL3900

(.509")

680F608 (1.700")

039L

CL3900 (2", 2-1/4" Thick Doors)

(.509")

681F068 (1.950")

044

CK4400

(.509")

NA Separately

051

B2/G2/G3 ED Trim

(.552")

489F028 (.890")

052

UT5200/CK4200

(.552")

No Tailpiece

(.552")

Note #1= For 7-pin version, suffix -7 i.e. 2000-033-7

2001-052

Type

2001

2001-044

Tailpiece

Series

2001-066
Lever
(Plug
diameter)

Knob
(Plug
diameter)

Tailpiece Part
Number
(Length) 6-Pin

Tailpiece Part
Number
(Length) 7-Pin

Remarks

031

CL3129

(.509")

775F958 (.808")

775F968 (.652")

Use 2001-031-E8 for EMK Blank

034

CL3329/CL3629
CL3429 (Lockset Series Obsolete)

(.509")

585F338 (1.046")

585F358 (.890")

Use 2001-034-E8 for EMK Blank

044

CK4429 (Straight Tailpiece)

564F508 (.764")

Use 2001-044-E4 for EMK Blank

(.552")

No Tailpiece

Use 2001-052-E4 for EMK Blank

(.509")

574F128 (.835")

Use 2001-066-E4 for EMK Blank

052

CK4229

066

CK4429 (Twisted Tailpiece)

(.509")
(.552")

Note #1= For 7-pin version, suffix -7, i.e. 2000-033-7
Note #2= 2003-044 used for CK4455 & CK4482 prior to August 1993

Type

Tailpiece

2100-052
2100

052

Series
Ronde and
Continental Knob
(Obsolete)

Lever (Plug Knob (Plug
diameter)
diameter)

(.552")

Tailpiece Part
Number
(Length) 6-Pin
No Tailpiece

Tailpiece Part
Number
(Length) 7-Pin
NA

Remarks
Finishes 605, 606,
611, 612, 613, 625,
626

10
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Conventional

Component (Key-in-Lever/Knob)

Key Systems

2200-001

2200-002

2200-008

2200-076

2200-054

2200-003

Cylinders for Other Manufacturer’s Products - 6-pin
Type

Tailpiece

Series

Lever (Plug
diameter)

Knob (Plug
diameter)

Tailpiece Part Number
(Length)

Tailpiece
Orientation

(.552")

444F748 (.813")

Vertical

Alarm Lock DL2500 Series
Arrow® H Series Knobs and Levers
001-A21

Arrow Q Series Levers
Sargent® 10 Line (Enlarge Lever Hole)
Schlage® D Series Levers

2200

001-A22

Schlage AL and ND Series Levers

002-A21

Schlage D Series Knobs

(.552")
(.552")

461F108 (1.078")

Vertical

444F748 (.813")

Horizontal

002-A22

Schlage A Series Knobs (PLY, etc.)

(.552")

461F108 (1.078")

Horizontal

002-A23

Schlage A Series Knobs (ORB, only)

(.552")

520F358 (1.328")

Horizontal

003-A24

Lockwood® H Series Knobs (Enlarge Knob Hole)

(.552")

444F748 (.813")

Vertical

008

Sargent 7,8,9 Line (Enlarge Knob Hole)

(.552")

054

Yale® 5400, 6200 Knobs Only (Enlarge Knob Hole)

(.552")

076

Sargent 7600 Integralock (Enlarge Knob Hole)

(.552")

Cylinders with Other Manufacturer’s Keyways - 6-pin
Type

2400

Tailpiece /
Keyway

Series

Lever (Plug diameter) Knob (Plug diameter) Tailpiece Part Number

Remarks

031-C

CL3100

(.509")

778F788 (.710")

Schlage C Keyway

031-LA

CL3100

(.509")

778F788 (.710")

Schlage LA Keyway

033-C

CL3300/CL3600 (June 2000 and after)
ED8200/ED8400

(.509")

622F328 (1.106")

Schlage C Keyway

033-LA

CL3300/CL3600 (June 2000 and after)
ED8200/ED8400

(.509")

622F328 (1.106")

Sargent LA Keyway

034-C

CL3400 (Lockset Series Obsolete)
CL3600 (Prior to June 2000)

(.509")

682F398 (0.950")

Schlage C Keyway

034-LA

CL3400 (Lockset Series Obsolete)
CL3600 (Prior to June 2000)

(.509")

682F398 (0.950")

Sargent LA Keyway

CL3700

(.509")

685F098 (0.794")

Schlage C Keyway

037-C

CK4700

(.509")

039-C

CL3900

(.509")

616F208 (1.700")

Schlage C Keyway

039-LA

CL3900

(.509")

616F208 (1.700")

Sargent LA Keyway

11
45078-9/15

Conventional

Component (Key-in-Lever/Knob/Dead Bolt)

Key Systems
Cylinders for Other Manufacturers' Products (.552" Plug Diameter) - 6-pin
Type

Tailpiece

Series

Plug
Diameter

Tailpiece Part Number
(Length)

Remarks

002-A47

Adams Rite®
4025 Pull

(.552")

146F788 (0.968")

Cylinder Only

003-A47

Adams Rite
4025 Pull

(.552")

146F788 (0.968")

Cylinder and
Housing

4200

4200-003-A47

4200-002-A47

DL2200/DL3200 Deadbolts Cylinder (.509 Plug Diameter)
Cylinder Type

6-Pin

7-Pin

Function
11, 13, 17

1-3/8" or 1-3/4" (Standard)

2" or 2-1/4"

Cylinder

Tailpiece

Cylinder

Tailpiece

4400-134-A51

753F768

4400-134-A51

753F768

4400-134-A52

753F778

4400-214-A52

753F788

11, 13, 17

4400-134-A51-7

753F768

4400-134-A51-7

753F768

4400-134-A52-7

753F778

4400-214-A52-7

753F788

12
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Conventional

Rim

Key Systems
Rim Cylinders
For use with exit devices and exit device trim.

Type

Tailpiece Length
058
138

3000

200
200N
200V
312
312V

5/8" 955 and 959 Trims
1-3/8" M61 & M62 option for ED8200 and
obsolete ED9200 exit device alarms
2" (std. door)
2" ED4000/ED5000 Night Latch Function
2" vertical tailpiece
3-1/2" (thick door)
3-1/2" vertical tailpiece

Pins

Keyway

Finish

6 (standard)
7

(see pages 31-39)

605
606
611
612
613
622
625
626
629
630
722

Pins

Keyway

Finish

Tailpiece Orientation
std. = Horizontal
V = Vertical

Rim Thumbturn

Type

3300

Tailpiece Length

138
200

1-3/8"
2" (std. door)

N/A

605
606
611
612
613
622
625
626
629
630
722

13
45078-9/15

Interchangeable Core
Key Systems
Fast changeover - new security in seconds!
Options:
• 7-Pin

• Construction Master Keying

• VKC (Visual Key Control)

• Restricted/Protected Keyways

• CKC (Concealed Key Control)

• Pyramid
Interchangeable Core

Advantages
Rekeying can be done by non-technical
personnel without removing hardware
from the door. When used systemwide, IC provides tremendous rekeying
convenience.
When planned from the inception of a
system, IC cylinders can be integrated with
conventional cylinders.
Applications
IC is recommended for virtually all types of
keying systems, such as office buildings,
hotels, schools, hospitals and universities.
When used in exit devices and other
installations which are labor intensive to
rekey, IC saves time and money over the
life of the building.

Operations
All operating keys (change, master, grand
master) operate the lock normally. To
rekey, use the special control key. The
control key operates at a separate shear
line in certain chambers within the core.
Only the control key is required to remove
and install a core.
Cores
6-pin standard; 7-pin, security and Pyramid
optional. Two nickel silver change keys
furnished standard per core. Control keys
only furnished when ordered.
Key Control
Corbin Russwin cores are available
with protected and restricted keyways,
patented keyways, security and Pyramid
to deter unauthorized key duplication.
No orders for patented protected keys,
security or Pyramid keys will be shipped
for a keying system without a letter of
authorization from the end user.

Construction Keying
Corbin Russwin recommends temporary
construction cores for greater security.
Special construction master keying is
also available, when planned from the
inception of the keying system. See page 7
for details.
Core Marking
Concealed Key Control (CKC) is available
for all Corbin Russwin cores. Visual Key
Control (VKC) is available for conventional
cores, but not for security or Pyramid
cores.
Ordering IC Locksets and Exit Devices
For specific product availability and Quick
Codes for cylinder options, see “How to
Order” in each catalog section.

14
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Interchangeable Core

How to Order

Key Systems
Interchangeable Core Mortise
10

3
4
8
9
7

Core

Function

Pyramid
SFIC Housing
Only (No Core)
Standard
Security
(6-Pin only)
LFIC Housing
only (no core)

0 Standard
1 Uses - E1suffix
for EMK blank
Hotel 1-3/8"
with A01 cam
only.
7 Pyramid Security

–

114

–

A01

Length
114
138
112
134
200
214
212

1-1/4"
1-3/8"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"

–

Cam

–

Pins

(see page 40)
A01 Cloverleaf
A02 Straight
A03 Adams Rite® MS and
DL3000 Deadlock
A04 DL4000
A05 Adams Rite 4070
A06 Schlage® Cloverleaf
A07 DL4100
A62 MR Straight / 900 Series
Mullion
A92 Exit GripTrim 01 & 02
A93 Obsolete deadlocks:
Corbin® 610 Series and
Russwin® 1403 Series

6
7

(standard)
(Not available for
1-1/4", 1-3/8"
LFIC and 1-1/4"
SFIC housings)

Finish

Keyway

Finish

(see
pages
31-39)

605
606
611
612
613
613E
622
625
626
629
630
722

Option

Temporary
Construction Core
CT6
CT7
CT6D

6-pin LFIC
7-pin LFIC
6-pin LFIC
Disposable
CT7D 7-pin LFIC
Disposable
CTP
Pyramid LFIC
CTPD
Pyramid LFIC
Disposable
CT6SD 6-pin SFIC
Disposable
CT7SD 7-pin SFIC
Disposable

Interchangeable
Core Rim

Core
3
4
8
9
7

Pyramid
SFIC Housing Only (No
Core)
Standard
Security (6-Pin only)
Housing only (no core)

Standard
Pyramid Security

178

–

Tailpiece Length

Function
0
7

–

058
114

5/8"
1-1/4" M61 & M62
option for ED8200
and obsolete ED9200 exit
device alarms
178 1-7/8" (std. door)
178V 1-7/8" vertical
tailpiece
318 3-1/8" (thick door)
Tailpiece Orientation
std Horizontal
V
Vertical (Not Available for
114 length)

–

Pins
6
7

(standard)

Finish

Keyway

Finish

(see pages
31-39)

605
606
611
612
613
622
625
626
629
630
722

Option

Temporary
Construction Core
CT6
CT7
CT6D

6-pin LFIC
7-pin LFIC
6-pin LFIC
Disposable
CT7D 7-pin LFIC
Disposable
CTP
Pyramid LFIC
CTPD Pyramid LFIC
Disposable
CT6SD 6-pin SFIC
Disposable
CT7SD 7-pin SFIC
Disposable

15
45078-9/15

Interchangeable Core

How to Order

Key Systems
Core Only
Description

Number

Remarks

EMK Blank

6-pin for CL3129

8001-031

Hotel indicator pin

E8 Suffix

7-pin for CL3129

8001-031-7

Hotel indicator pin

E8 Suffix

6-pin standard

8000

Set to hotel mortise EMK

N/A

6-pin standard

8000EMK

-E1 suffix

Security

8010EMK

Set to hotel mortise EMK

Security

8010

7-pin

8000-7

Hotel indicator pin

N/A

6-pin for CL3329, CL3629

8001-034

Hotel indicator pin

-E8 suffix

7-pin for CL3329, CL3629

8001-034-7

Hotel indicator pin

-E8 suffix

6-pin for CK4229

8001-042

Hotel indicator pin

-E4 suffix

Security for CK4229

8011-042

-E4 suffix

Pyramid High Security

8020

N/A

Pyramid Security

8027

N/A

N/A
-E1 suffix

Specify Keyway
Finishes: 605, 606, 611, 612, 613, 622, 625, 626
Uncombinated cores: Specify “UC”. Not applicable for 8000EMK, 8010EMK

16
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Mortise

Security Cylinders (Inactive - For Existing Systems only)
Key Systems

Standard Function
Security Mortise
10

Mechanism
1 Standard
9 IC (available)
1-1/4"
1-3/8"
1-1/2"
1-3/4"
2"
2-1/4"

–

Function
0
1
2
4
5

Standard
Hotel
Blockout (No IC)
Brink CW (No IC)
Brink CCW (No IC)

118

–

A01

Length
118
114
138
112
134
200
214
212
234

1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
2-3/4"

–

Cam (see page 40)
A01
A02
A03
A04
A05
A06
A07
A62
A92
A93

Cloverleaf
Straight
Adams Rite® MS and DL3000 Deadlock
DL4000 Deadlock
Adams Rite 4070
Schlage® Cloverleaf
DL4100
MR Straight / 900 Series Mullion
Exit GripTrim 01 & 02
Obsolete deadlocks: Corbin® 610 Series
and Russwin® 1403 Series

–

Finish

Option

Pins

Keyway

Finish

Uncombinated

6 -pin only

(see
pages
31-39)

605
606
611
612
613
613E
622
625
626
629
630
722

Special Function Security Mortise
Hotel Function Security Mortise

Blockout Function Security Mortise

Brink Function Security Mortise

Change key and all normal master keys
have limited rotation to retract latchbolt
only. Emergency Master Key (EMK) and
display key turn 360° for additional
operation of deadbolt. EMK and display
key requires 7-pin key blank for standard
cylinders and -E1 suffix blank for IC
cylinders.

This is an access control feature used in
applications where temporary blockage of
all keys (master, change, etc.) is required.
A simple turn of the Blockout Key to
the 11 o’clock position blocks normal
operation for as long as necessary. When
normal access is again desired, insert
the Blockout Key and turn it back to
the 12 o’clock position. Integration of
these cylinders must be planned from
the inception of a keying system. Also
available in rim version (see page 19).

This function was developed for the
minimum security detention market. The
change key turns only one direction while
the master key turns both directions.
Integration of these cylinders must be
planned from the inception of a keying
system.

Cylinder
Number
1011-114-A01*

Description
1-1/4" Cloverleaf cam
only

1091-138-A01

IC version 1-3/8"

1071-138-A01

IC housing only

*1011 cylinder not available with D1, D2, L1 or
L2 keyways

Cylinder
Number
1012-114-A01

Cam
Cloverleaf cam

Cylinder
Number

Change Key

Cam

1014-118-A02

Clockwise

Straight
Straight

1012-114-A02

Straight cam

1015-118-A02

CounterClockwise

1012-114-A03

DL 3000 Series
Adams Rite® MS cam

1014-118-A05

Clockwise

Brink “CKS”

1015-118-A05

CounterClockwise

Brink “CKS”

1012-114-A04

DL4000 Series Deadlock

1012-114-A05

Adams Rite 4070

1012-114-A93

Obsolete 610/1403
Deadlock

Folger Adam® NS400 Series x LEK uses
A02 cam version.

17
45078-9/15

Security Cylinders (Inactive - For Existing Systems only)

Other

Key Systems
Security Rim

Mechanism

–

200

Function

1 Standard
9 IC

Standard

–

Tailpiece Length
For 3010 Only

0 Standard
2 Blockout
(no IC)

Interchangeable Core

For IC

138

1-3/8" M61& M62
option for ED8200
and obsolete
ED9200 exit device
alarms

114

1-1/4" M61 & M62
option for ED8200 and
obsolete ED9200 exit
device alarms

200

2" (Std. door)

178

1-7/8" (Std. door

200V 2" vertical tailpiece

178V 1-7/8" vertical tailpiece

312

318

3-1/2" (thick door)

Finish

Pins

Keyway

6-pin
only

(see pages
28-36)

3-1/8" (thick door)

Option

Finish Uncombinated
605
606
611
612
613
613E
622
625
626
629
630

312V 3-1/2" vertical
tailpiece

Security Cores Only

Description

Core Number

Remarks

EMK Blank

Standard
For 1091

8010
8010

EMK Set to hotel mortise EMK

N/A
-E1 suffix

For CK4229
8011-042
Hotel indicator pin
Specify Keyway. Available uncombinated, except 8010EMK.
Finishes: 605, 606, 611, 612, 613, 622, 625, 626, 690

Key-in-Knob/Key-in-Lever

-E4 suffix

Lockset

Cylinder Number

CL3100
CL3300, CL3500, CL3800, CL3600 Series (June 2000 and after)
G1055 exit device knob trims
CL3300, CL3600 Series (Prior to June 2000)

2010-031
2010-033
2010-033H
2010-034

CL3800 Series (obsolete 1993-1997 model)

2010-038

CL3900 Series

2010-039

CL3900 Series (2", 2-1/4" Thick Door)

2010-039L

B2, G2 Exit Device Knob Trim
CK4200 and UT5200 Series
CK4229 Hotel Function
CK4300 Series
Specify Keyway. Available uncombinated.
Use -E4 suffix for EMK blank. Finishes: 606, 626

2010-051
2010-052
2011-052
2010-031H

DL2200/DL3200 Deadbolts Cylinder
1-3/8" or 1-3/4" (Standard)

Function

2" or 2-1/4"

Cylinder

Tailpiece

Cylinder

Tailpiece

11, 13, 17

4410-134-A51

753F768

4410-134-A51

753F768

4410-134-A52

753F778

4410-214-A52

753F788

Other Manufacturers’
Products

Vertical Tailpiece

Horizontal Tailpiece

Alarm Lock DL2500 Series

2210-001-A21

Arrow® H Series Knobs & Levers

2210-001-A21

Arrow Q Series Levers
Sargent® 10 line (Enlarge lever hole)
Schlage® D Series Levers

2210-001-A21
2210-001-A21
2210-001-A21

Schlage AL and ND Series Levers
Lockwood H Series Knobs
(enlarge knob hole)

2210-001-A22
2210-003-A24

Schlage D Series Knobs

2210-002-A21 Sargent 7, 8, 9 Line
2210-002-A22 (enlarge knob hole)
Schlage A Series Knobs (ORB, only) 2210-002-A23 2210-008
Available Uncombinated. Finishes: 606, 626
Schlage A Series Knobs (PLY, etc.)

Yale® 5400, 6200 Knobs
(enlarge knob hole)
2210-054

18
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Master Ring

Features and Benefits

Key Systems
• Greater master keying capacity
• Superior keying flexibility

Springs
Top Pins
Plug Shear Line
Plug

Spring Cover
Shell
Build-up Pins
Master Ring

• Greater security in each cylinder

Ring
Shear
Line

Change Key Aligns Pins at Plug

Advantages

Applications

6-pin Master Ring keying systems
offer keying capacity similar to 7-pin
conventional cylinder systems.

Corbin Russwin Master Ring cylinders are
especially recommended for installations
which require large and complicated
keying systems, such as hospitals and
universities.

There is, however, far greater flexibility
for asymmetrical keying systems, because
change key combinations do not require
any direct relationship to those of
master keys. In conventional systems,
combinations not needed under a given
master key cannot be used elsewhere in
the system. In master ring, they can. This
frees thousands of combinations for use
anywhere within a master ring system.
Since the master keys all have their own
shear line, fewer master pins are used,
increasing cylinder security. This security
enhancement reduces the chances of
cylinders being manipulated by stray
keys. It also hinders surreptitious entry by
picking and impressioning.
When planned from the inception of a
keying system, conventional cylinders
may be integrated into specific parts of a
Master Ring system for areas where the
required hardware does not accommodate
the large Master Ring cylinders.

Master Key Aligns Pins at Ring

Master Key
Operation
Change Key
Operation

Field Serviceability
Corbin Russwin Master Ring cylinders are
fully field serviceable.
Key Control

Operation

Restricted and protected keyways are
available.

The change key rotates the cylinder plug
only. Master keys operate at the master
ring, which is a sleeve around the plug.

Construction Master Keying
When planned from the inception of a
keying system, construction master keying
is available.

Cylinder Marking
Visual Key Control (VKC) and Concealed
Key Control (CKC) are available for Master
Ring cylinders.
Ordering Locksets and Exit Devices
with Master Ring Cylinders
For specific product availability and Quick
Codes for cylinder options, see “How to
Order” in each catalog section.

19
45078-9/15

Master Ring

How to Order

Key Systems
Standard Master Ring Mortise

Type

(1-1/2" diameter; .552" diameter plug)

1060

Pins

Keyway

100 1" (5-pin only)

Length

(see page 40)

5 (1" length only)

(see pages 31-39)

118 1-1/8"

A61 Cloverleaf*

6 (standard)

114 1-1/4"

A62 Straight

138 1-3/8"

A63 Large Short

112 1-1/2"

A64 Large Long

134 1-3/4"

A65 Cloverleaf
(formerly 11A)

200 2"

Cam

234 2-3/4"
300 3"

605
606
611

7 (Available
1-3/8" only)

612
613
613E
618

214 2-1/4"
212 2-1/2"

Finish

619
*A61 is for locks made
after 5/93; requires
thumbturn hub
562F41-2

622
625
626
722

Flexible Head Master Ring Mortise
(1-1/2" diameter; .552" diameter plug)

Type
1160

Length

Cam

Pins
6 (standard)

Keyway
(see pages 31-39)

Finish

100 1" (6-pin only)

(see page 40)

118 1-1/8"

A61 Cloverleaf*

606

605

114 1-1/4"

A62 Straight

611

A63 Large Short

612

A64 Large Long

613

A65 Cloverleaf
(formerly 11A)

613E
618
619

*A61 is for locks made
after 5/93; requires
thumbturn hub
562F41-2

Dummy Master Ring Mortise

626

Cylinder Number

Length

1460-118

1-1/8"

1460-114

1-1/4"

1460-138

1-3/8"

1460-112

1-1/2"
618, 619, 622, 625, 626, 722

Cylinder Number

(1-1/2" diameter; .552" diameter plug)

625
722

Finishes: 605, 606, 611, 612, 613,

Master Ring Rim

622

Description

3060-200

Standard horizontal tailpiece

3060-312

Thick door, horizontal tailpiece

3060-200V

Vertical tailpiece

3060-312V

Thick door, vertical tailpiece

Finishes: 605, 606, 611, 612, 613, 618, 619, 622, 625, 626, 722

CK4200 & UT5200 Series Lockset

Exit Device Operators

Specify keyway (.552" diameter plug)

Standard Cylinder
2060-052
Finishes: 606, 626

With Indicator Pin
for CK4229 Hotel
2061-042

Discount. Ronde &
Continental Knob
2160-052

For ED6800 x B5 or B6
For ED7400 x 03 or 04
4266-001-A02

For ED6800 x 01 or 02
4266-001-A92

Finishes: 606, 626

20
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Pyramid

Applications

Key Systems
Description
Pyramid, Corbin Russwin’s patented
security cylinder, is the most secure locking
system available. Pyramid cylinders are
available in both high security and security
versions. The high security version in
certified by Underwriters Laboratories to
UL437 standards.

Features
• Utility patent 6,125,674 (expiring 2018)

• The ultimate protection against unauthorized key
duplication

• Available with high-security protection
(UL437)

• Underwriters Laboratory listing for resistance to
picking & drilling

• 7-pin

• Greater master keying capabilities
• Uses existing 6-pin interchangeable core housings
• 1-1/4" (32mm) length for mortise cylinders

• Available with stainless steel pins

• Drill and pick resistant

• Large key bow

• Easy handling & special stamping options

• Thicker and stronger nickel silver keys

• Ideally suited for high usage & abusive applications

• User friendly

• No expensive dedicated equipment necessary for key
cutting

Applications
Especially recommended for installations
requiring superior protection against
picking, drilling and other surreptitious
entry. Ideally suited for Educational and
Healthcare facilities, Industrial and
Commercial buildings.
System Administration & Key Control
Key control will be maintained through
compliance with Corbin Russwin’s
Security Policy: for a copy contact Key
Systems Administration or visit our web
site at www.corbinrusswin.com.
A Pyramid owner’s binder will be
forwarded directly to the designated
systems administrator with each new
system. Included in this binder are
catalogs as well as system-specific,
sequentially coded registration
certificates. A registration certificate must
accompany each order that is submitted
to Corbin Russwin.
Product Specification
All cylinders shall employ a patented
locking mechanism that requires the use
of a patented key and is furnished with
a minimum of 7 pins. High Security
cylinders shall meet the requirements of
UL437. Interchangeable cores shall meet
the drill resistance and pick resistance of
UL437.
Keys shall be nickel silver and furnished
with a large bow.
Certifications
BHMA A156.5 Grade-1
E09211A* (Mortise)
E09221A* (Rim)

Benefits

E09231A* (Bored Lock Cylinders)
*A (suffix) refers to cylinders of pick and
drill resistance.
UL Underwriters Laboratories Inc.
(UL437)BP8976
1020, 2020, 3020 Fixed Core (FC)
series only
Finishes
Pyramid cylinders are available in all Corbin
Russwin standard finishes.

Construction Master Keying
Pyramid cylinders are not available
construction master keyed. Interchangeable
core jobs can be furnished with temporary
construction cores. Temporary construction
cores will be unrelated to the permanent
system’s master key. When the permanent
cores are installed, the temporary
construction cores are returned to Corbin
Russwin for credit.

Keys shipped separately for master keyed
cylinders.

How to Order Example
1. Mortise lock with temporary
construction core
Qty. - ML2051 - LSA - 626 - RHR - CTP
2. Mortise cylinder with temporary
construction core
Qty. - 1080-114-A01-626-CTP
3. Permanent core ordered separately
Qty. - AA1 - 8020 - 626

System Specifications

Pyramid Quick Codes2

• Pyramid systems are independent
and cannot be keyed into existing
and/or conventional systems.
• Pyramid cylinders are to be keyed
to factory-generated bittings only.
• Cross keying is not available.

PS
PCS

Keying
7 pin with two nickel silver change keys
per cylinder. Pyramid cylinders may be
uncombinated (specify UC)1, master or
grand master keyed to a specific facility.

Key Discard Policy & Warranty
See page 49.

PHS
PCHS
CTP3
CLP3

Pyramid Security Fixed Core
Pyramid Security
Interchangeable Core
Pyramid High Security Fixed Core
Pyramid High Security
Interchangeable Core
Pyramid with Temporary
Construction Core
Pyramid Less Core

1. UC cylinders are supplied, less keys, pins, springs and pin covers.
2. When cylinders are ordered with locks.
3. Pyramid cores to be ordered as a separate line item.

21
45078-9/15

Pyramid

Operation

Key Systems
Performance Features
Shell
• Locking pin mechanism
• Hard metal inserts
Key
• Control pin
Plug
• Blocking plate
• Hard metal inserts
Pins & Springs
• Hardened stainless steel pick-resistant
bottom pins*
• Hardened stainless steel pick-resistant
top pins*
• Hardened stainless steel pick-resistant
master pins (if required)*
• Hardened stainless steel pick-resistant
build-up pins (if interchangeable core)*
• Springs

P6 Keyway (with side pins)

Collar
• Solid recessed (mortise)
* Hardened stainless steel pins used for UL437
High Security versions only.
Pyramid Security version uses nickel silver
bottom pins and brass master, build-up
and top pins.

Operation

SPECIALLY
MILLED SIDE
PIN GROOVE

Side Pins

CONTROL
PIN

Shell
plug
SIDE PINS

Without Key
Locking pin mechanism
engages blocking plate
and prevents the plug
from turning.

With Key
Key’s control pin
depresses the locking
pin mechanism and
allows the plug to
turn.

22
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Pyramid

Operation

Key Systems
Keys
• Nickel silver
• Key Bow Type 28
• Ordering example: 7PIN-28-XXXX
Keyway

Front Side

Back Side

KEY SET
SYMBOL

• Ordering example P6 Keyway:
7PIN-28-XXXX-SPCXX
Side Pin Code
Keyway
Back Side Stamping & Options

SYSTEM
REGISTRY
NUMBER

• Key set (VKC1), standard – unless otherwise indicated
• System registry number will be stamped on upperCONTROL
level keys unless otherwise indicated
PIN
• Concealed key control (CKC2) available on cylinders
• Visual key control (VKC2 and VKC3) not available on
cylinders. CKC3 also not available.
Note: Refer to Corbin Russwin’s general catalog and
price book for complete detailed information.
Keyway Security
Pyramid keyways will be determined by the supervisor of
Key Systems Administration. Assignment will be based
on the overall system requirements and geographic
location to provide maximum protection to the owner.
For security reasons, the keyway profiles are not shown.

23
45078-9/15

Pyramid

Mortise

Key Systems
Mortise Cylinders
Mortise Locks/Deadlocks
Mortise Locks/Deadlocks
For use with all Corbin Russwin ML2000,
ML2000HS and ML2200 (discontinued)
mortise locks. DL4000 & DL3000 Series
Deadlocks.
Mortise Exit Devices
For use with ED7600 and ED6600 devices.
Type

Conventional
Fixed Core
(FC)

Interchangeable Core
(IC)

Length

1020 - High Security Mortise
1027 - Security Mortise
1030 - High Security IC Mortise complete
1037 - Security IC Mortise complete
1070 - Housing only

Cam

1020/1027 - Non-IC (Fixed Core)
114 - 1-1/4" (32mm)
112 - 1-1/2" (38mm)
*See note #3

Finish

A01 - Cloverleaf

605 606 611 612 613 -

Bright Brass
Satin Brass
Bright Bronze
Satin Bronze
Dark Oxidized Satin
Bronze - oil rubbed
613E - Dark Oxidized Satin
Bronze - Equivalent
618 - Bright Nickel Plated
619 - Satin Nickel Plated
622 - Flat Black Coated
625 - Bright Chromium Plated
626 - Satin Chromium Plated
629 - Bright Stainless Steel
630 - Satin Stainless Steel
722 - Black oxidized bronze,
oil rubbed

A02 - Straight
A03 - Adams Rite® MS

1030/1037/1070 IC
114 - 1-1/4" (32mm)
138 - 1-3/8" (35mm)
112 - 1-1/2" (38mm
134 - 1-3/4" (44mm)
200 - 2" (51mm)
214 - 2-1/4" (57mm)
212 - 2-1/2" (64mm)

A04 - DL4000 Series
A05 - Adams Rite® 4070
A06 - Schlage® Cloverleaf
A07 - DL4100
A62 - 900 KRM Straight
A92 - See note #1
A93 - See note #2

Note #1 - Not available IC
Note #2 - For obsolete Corbin® 610 and Russwin® 1403 series deadlocks
Note #3 - For ML2000 applications with door thickness exceeding 2-1/2" up to 3" in thickness, use IC cylinders.

How to Order Examples
High Security Mortise Cylinder Ordered Separately
Quantity

Keyset

Cylinder

Length

Cam

Finish

Keyway

AA1

1020

114

A01

605

P3A1

Mortise Cylinder with a Pyramid Security Interchangeable Core
Quantity

Keyset

Cylinder

Length

Cam

Finish

Keyway

AA1

1037

114

A01

605

P3A1

Mortise Lock with a Pyramid Fixed Core High Security Cylinder
Quantity

Keyset

Series/Function

Trim

Finish

Hand

Pyramid Quick Code

Keyway

AA1

ML2051

LSA

626

RHR

PHS (PS for Security version)

P3A1

Mortise Lock with a Pyramid Interchangeable Core High Security Cylinder
Quantity

Keyset

Series/Function

Trim

Finish

Hand

Pyramid Quick Code

Keyway

AA1

ML2051

626

RHR

PCHS (PCS for Security version)

P3A1

Exceptions

Pyramid cylinders are not available for the following: ML2029, ML2029HS, ML2029VR, ED7600 - applications over 2-1/4" thick, ED6600 - applications over 1-3/4" thick.
24
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Pyramid

Rim

Key Systems
Rim Cylinders
For use with exit devices and exit
device trims.

Conventional
Fixed Core
(FC)

Type

Interchangeable Core
(IC)
Availability

Length
058-5/8" (16mm) Tailpiece

114 - 1-1/4" (32mm) M61 & M62 option for ED8200 and ED9200 exit
device alarms
3020 - High Security

138 - 1-3/8" (35mm) M61 & M62 option for ED8200 and Obsolete
ED9200 exit device alarms

Rim Cylinder
3027 - Security
Rim Cylinder
3030 - High Security IC
Rim Cylinder
3037 - Security IC
Rim Cylinder
3070 - Housing only

178 - 1-7/8" (48mm) (Std. Door)

178V - 1-7/8" (48mm) vertical

200 - 2" (51mm)

200N - 2" (51mm) ED4000/ED5000 Night Latch Function

200V - 2" (51mm) vertical

312 - 3-1/2" (89mm)

312V - 3-1/2" (89mm) vertical

318 - 3-1/8" (79mm)

Finish

605 606 611 612 613 -

Bright Brass
Satin Brass
Bright Bronze
Satin Bronze
Dark Oxidized Satin Bronze oil rubbed
613E - Dark Oxidized Satin
Bronze - Equivalent
618 - Bright Nickel Plated
619 - Satin Nickel Plated
622 - Flat Black Coated
625 - Bright Chromium Plated
626 - Satin Chromium Plated
629 - Bright Stainless Steel
630 - Satin Stainless Steel
722 - Black oxidized bronze,
oil rubbed

How to Order Examples
High Security Rim Cylinder Ordered Separately
Quantity

Keyset

Cylinder

Length

Finish

Keyway

AA1

3020

200

605

P3A1

Rim Cylinder with a Pyramid Security Interchangeable Core
Quantity

Keyset

Cylinder

Length

Finish

Keyway

AA1

3037

178

605

P3A1

Exit Device with a Pyramid Fixed Core High Security Cylinder
Quantity
50

Keyset
AA1

Series/Function
ED5200

Trim
L955

Finish
630

Hand

Pyramid Quick Code

Keyway

RHR

PHS (PS for Security
version)

P3A1

Hand

Pyramid Quick Code

Keyway

RHR

PCHS (PCS for Security
version)

P3A1

Exit Device with a Pyramid Interchangeable Core High Security Cylinder
Quantity
50

Keyset
AA1

Series/Function
ED5200

Trim
L955

Finish
630

25
45078-9/15

Pyramid

Component (Key-in-Lever/Knob)

Key Systems
Key-in-Lever / Knob Cylinder
For use with Corbin Russwin CL3100,
CL3300, CL3500, CL3700, and CL3800
lever locks, CK4200 and CK4700 knob
locks and UT5200 unit locks. 2020/2027
series cylinders can also be used on
CL3400, CL3600, CL3800 and CL3900
(discontinued) locks.
Conventional
Fixed Core
(FC)
Type

Interchangeable Core
(IC)

Lockset Series
031 -

Finish

CL3100 Lever

031H - CK4300 Knob
2020 - High Security
Key-in-Lever/Knob

2027 - Security
Key-in-Lever/Knob

033 -

CL3300, CL3500, CL3600 (June 2000 and after) and CL3800 Lever

033H - G10 Exit Device Knob Trim
034 -

CL3400 Lever - CL3600 Lever (Before June 2000) A5, N5 Obsolete ED8000 Trims

037 -

CL3700 Lever - CK4700 Knob

038 -

CL3800 Lever (Manufactured 1993-1997)

039 -

CL3900 Lever (1-3/8" - 1-3/4" door)

606 - Satin Brass
626 - Satin Chromium Plated

039L - CL3900 Lever (2" - 2-1/4" door)
051 -

G3 Exit Device Knob Trim

052 -

CK4200 Knob - UT5200 Knob and Lever

Key-in-Lever/Knob for other Manufacturers’ Products
Cylinder Descriptions
High Security (PHS)

Security (PS)

Tailpiece Orientation

Used for:

2220-001-P21

2227-001-P21

Vertical

Schlage® D Series Levers
Arrow H® Series Knobs and Levers
Sargent® 10 line (Enlarge Lever Hole)

2220-002-P21

2227-002-P21

Horizontal

Schlage® D Series Knobs

2220-001-P22

2227-001-P22

Vertical

Schlage® AL and ND Series Levers

2220-002-P22

2227-002-P22

Horizontal

Schlage® A Series Knobs (Ply, etc.)

2220-002-P23

2227-002-P23

Horizontal

Schlage® A Series Knobs (ORB only)

DL2200/DL3200 Deadbolts Cylinder
Cylinder Type
High Security (PHS)
Security (PS)

1-3/8" or 1-3/4" (Standard)
Cylinder
Tailpiece
4420-134-A51
753F768
4420-134-A52
753F778
4420-134-A51-7
753F768
4420-134-A52-7
753F778

Function
11, 13, 17
12
11, 13, 17
12

2" or 2-1/4"
Cylinder
4420-134-A51
4420-214-A52
4420-134-A51-7
4420-214-A52-7

Tailpiece
753F768
753F788
753F768
753F788

How to Order Examples
High Security Component Cylinder Ordered Separately
Quantity

Keyset

Cylinder

Lockset Series

Finish

Keyway

AA1

2020

033

626

P3A1

Cylindrical Lock with a Pyramid Fixed Core High Security Cylinder
Quantity
50

Keyset
AA1

Series/Function
CL3357

Trim
PZD

Finish
626

Pyramid Quick Code
PHS (PS for Security version)

Keyway
P3A1

Cylindrical Lock with a Pyramid Interchangeable Core High Security Cylinder
Quantity
50

Keyset
AA1

Series/Function
CL3357

Trim
PZD

Finish
626

Pyramid Quick Code
PCHS (PCS for Security version)

Keyway
P3A1

Exceptions
Pyramid cylinders are not available for the following: CL3329, CL3629, CK4229, CK4451, CK4455, CK4457, CK4429, CK4482, DL2100 series, DL3100 series.

26
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Pyramid

Interchangeable Core

Key Systems
Interchangeable Core

Type

For use with Corbin Russwin's 6-pin
Interchangeable Core housings & shells.*

8020-

High
Security
IC core*

Finish
605
606
611
612
613
613E

8027-

Security
IC core*

622
625
626
722

* Note: Corbin Russwin 6-pin Interchangeable Core
housings 1070 (mortise) & 3070 (rim)
will accept 8020/8027 cores.

How to Order Examples
Security Interchangeable Core Ordered Separately
Quantity

Keyset

Cylinder

Finish

Keyway

AA1

8027

605

P3A1

Padlocks
Used with Pyramid Interchangeable Cores.
PL5030, PL5130, PL5230, PL5037, PL5137, PL5237

How to Order Examples
Padlock with a Pyramid High Security(8020) Interchangeable Core Cylinder
Quantity

Keyset

Series/Function

Shackle Length

Keyway

AA1

PL5030

258

P3A1

*Refer to general catalog for miscellaneous options.

Padlock with a Pyramid Security(8027) Interchangeable Core Cylinder
Quantity

Keyset

Series/Function

Shackle Length*

Keyway

AA1

PL5037

258

P3A1

Deadlocks
Used with Pyramid mortise cylinders. (DL3000 and DL4100)
Available in all standard finishes.

How to Order Examples
Deadlock with a Pyramid Fixed Core High Security Cylinder
Quantity
50

Keyset
AA1

Series/Function
DL4113

Finish
626

Hand

Pyramid Quick Code

Keyway

RHR

PHS (PS for Security
version)

P3A1

Deadlock with a Pyramid Interchangeable Core High Security Cylinder
Quantity

Keyset

Series/Function

Finish

Pyramid Quick Code

Keyway

AA1

DL4113

626

PCHS (PCS for Security version)

P3A1

27
45078-9/15

Bump Resistant Cylinders
Key Systems
Protect your building from unwanted entry with Corbin Russwin bump-resistant cylinders. Our
bump-resistant cylinders deter bumping without compromising the cylinder’s structural integrity
and strength. This option is available with Corbin Russwin conventional and Pyramid patented
security and high-security cylinders on our mortise, cylindrical and exit device hardware.
Recently, a lot of information has been circulating about bumping, a technique used to defeat
cylinders. Although this method has been around for a number of years, the internet has
increased public awareness. Bumping is when a “bump key” is inserted into the cylinder and
struck using a mallet or hammer type object. The bump key is specifically designed to transfer
the energy from the force of the blow to create a separation in the cylinder’s pins which
compromises the lock allowing it to open.
Although BHMA has yet to establish bump-resistance standards, Corbin Russwin Bump Resistant
Cylinders were tested and verified by an independent testing lab. They conclusively resisted
bumping attack and did not allow entry. Verification and testing data is available upon request.

BRP pinned mortise cylinder

Bump-Resistant Cylinders:
• Specify “BRP”
Retrofit:
• Convert existing cylinders with Bump-Resistant Top Spool Pins
Features
Bump-resistant cylinders are designed for use with all Corbin Russwin locking hardware:
• Cylindrical locks
• Mortise locks
• Exit devices
• Access control locks
• Unit locks
• Auxiliary locks

BRP pinned rim cylinder

Factory bitted, a symbol BRP is stamped onto pin cover/slides. Interchangeable core cylinders are
not available with bump-resistant pinning.

BRP pinned key-in-lever cylinder

Bump-Resistant Top Spool Pins
Description

Part Number

Qty

Conventional

628F10-7-171

Vials of 100 pcs.

Pyramid A

628F10 - 7 - 142

Vials of 100 pcs.

Pyramid C

628F10 - 7 - 236

Vials of 100 pcs.

28
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Key Blanks

How to Order

Key Systems
L4

–

6-Pin

–

Key Sections

Length

Bow Shape

(see pages 31-40)

Indicate
5-, 6-, 7-pin

1 Standard
5 Large
9 Security

Bow Marking
0 Coined Logo
1 Plain
2 DND
3 US property DND
9 Restricted DND

Standard Bows
Protected and
Restricted Keys

The standard bow
furnished for all
non-restricted keyways
unless otherwise
specified. The other side
is blank.
Example: L4-6PIN-10.

Blank both sides, for
use when more area is
required for stamping,
such as custom die
stamps. Not for use
with restricted keyways.
Example: L4-6PIN-11.

This bow enhances
key control for nonrestricted Corbin
Russwin keyways. Other
side blank. Example:
L4-6PIN-12.

For use only on U.S.
Government projects.
Example: L4-6PIN-13.

Large Bows

10, 50 and 90 bow
shapes are designated
as 19, 59 and 99 for
protected and restricted
keyways. They are
stamped this way on
the thumb side. Other
side blank.
RESTRICTED
DO NOT
DUPLICATE
This stamp is not
available for keys which
are not protected and
or restricted. Protected
keyway keys will be
stamped restricted.

DO NOT
DUPLICATE

Blank both sides.
Recommended for
special die stamps
or large amounts of
stamping, and for
Control and Emergency
Master Keys. Not
available for 752, 852
or A Class keyways.
Example: L4-6PIN-51.

Recommended for nonrestricted keys which
need extra space for
special stamping. This
bow also enhances
key control for other
Corbin Russwin keys.
Not available for 752,
852 or A Class keyways.
Example: L4-6PIN-52.

For use only on U.S.
Government projects.
Recommended for use
when a large amount
of stamping is required.
Not available for 752,
852 or A Class keyways.
Example: L4-6PIN-53.

29
45078-9/15

Key Blanks

How to Order

Key Systems
Security Bows (Inactive - for Existing Systems Only)
90

Standard bow for
security keys. Example:
L4-6PIN-90.

Blank both sides for
security keys where
extra stamping is
required. Not for use
with restricted keyways.
Example: L4-6PIN-91.

This bow enhances
key control for nonrestricted security keys.
Other side blank.
Example: L4-6PIN-92.

For use only on
security keys for U.S.
Government projects.
Example: L4-6PIN-93.

DO NOT
DUPLICATE

Hotel Security Key Blanks

Standard hotel function mortise cylinders 1001 and 1011 use 7-pin Emergency Key blanks. The 51 bow is suggested e.g., L4-7PIN-51.
All other Corbin Russwin hotel function cylinders require keys with a special undercut tip. The four variations are shown below.

-E1 Suffix

-E8 Suffix

-E4 Suffix

-E5 Suffix

For interchangeable core
mortise cylinder 1081
(conventional) and 1091
(security). Available 6-pin only.
Examples: L4-6PIN-51-E1 or
L4-6PIN-90-E1.

For CL3329 and CL3629
and obsolete CL3429 key-inlever locksets, fixed core and
IC. Available 6- and 7-pin.
Example: L4-6PIN-51-E8.

For CK4229 locksets, fixed
core and IC, conventional
and security. Also for CK4429.
Available 5- or 6-pin.
Examples: L4-6PIN-51-E4
or L4-6PIN-90-E4.

For obsolete 1429, 3333EM,
4333EM and 5629 key-inknob locksets. Available
5- and 6-pin. Example:
L4-6PIN-51-E5.

Pyramid Bow
Front Side

Ordering Example
Back Side

PXXX - 7 - 28

KEY SET
SYMBOL

SYSTEM
REGISTRY
NUMBER

28
Standard bow furnished for all Pyramid keys.

Bow Shape

Key Sections
(see page 43)

Length
7-pin

30
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Keyways

Keyway Types

Key Systems
Multiplex/Simplex Keyways

Inactive Keyways

Pyramid Keyways

Multiplex keyways can be used together to
expand a keying system. A simplex keyway
is independent, stands alone and cannot
be tied into any other keyway to expand a
keying system.

Many older Corbin Russwin keyways are
designated inactive. No new systems
shall be established on these keyways.
However, they continue to be available to
support existing keying systems.

All/Multi-Section/Single Section Keys

Restricted Keyways

All/Multi-section keys can be used on more
than one cylinder with different sections.
For example: a key cut on the L41 multisection keyblank will pass cylinder in the
L1, L2, L3 and L4 keyways. Single section
keys can be used with cylinders of the
same section. For example: a key cut on
the L4 single section keyblank will only
pass a cylinder in the L4 keyway.

For security reasons, these keyway profiles
are not shown.

Pyramid keyways are only available
for Pyramid cylinders and separate
specifications are used from conventional
Corbin Russwin keying systems. New
systems for Pyramid require a Notice of
Acceptance document to be on file with
Key Systems Administration. All orders
for Pyramid must have a system specific
Registration Certificate attached and all
products must ship directly to the end
user unless a quantity - specific Letter of
Authorization accompanies the purchase
order. For security reasons, these keyway
profiles are not shown.

Active Keyways
Keyways which are available for new
Corbin Russwin keying systems are
considered active. In the case of new
master key systems, the factory reserves
the right to select the keyway from a range
of standard keyways, based on usage in a
particular geographical area.

Protected Keyways
Key Systems Administration reserves
the final decision as to which protected
keyway family will be selected. A notice
of acceptance showing the facilities
name, address and contact information is
required before orders can be processed
For security reasons, these keyway profiles
are not shown.

L Series (Corbin Russwin)
4 keyway multiplex system.
Available 5-, 6- and 7-pin.
Z Class bitting.
Reverse of D Series.
Security

Bitting Classes
Corbin Russwin has several sets of
dimensional standards for bitting (cutting)
keys. If the wrong specifications are used
when making keys on code machines
in the field, they will not operate in
conjunction with factory supplied cylinders
and keys. The bitting class is given for each
group of keyways. All bitting specs are
available in the Corbin Russwin cylinder
manual.

L41

All-Section Key
L12

Multi-Section Key

L34

Cylinder Keyway and
Single Section Key

STOCK

Available

31
45078-9/15

Keyways

Z and DH Class Keyways

Key Systems
D Series (Russwin®)

All-Section Key

4 keyway multiplex system.
Available 5-, 6- and 7-pin.
DH Class bitting.
Reverse of L Series.
Security

D41
D12

Multi-Section Key

D34

Cylinder Keyway and Single
Section Key

Available

59 Series (Corbin®)
9 keyway
multiplex system.
Available 5-, 6and 7-pin.
Z Class bitting.

All-Section Key

59AD

Multi-Section Key

59AB
59A

Multi-Section Key
Security

59CD
59B

59C

59D

Cylinder Keyway and
Single Section Key
59A1

Available

59A2

59B1

59B2

59C1

59C2

59D1

59D2

H Series (Russwin)
8 keyway
multiplex system.
Available 5-, 6and 7-pin.
DH Class bitting.

All-Section Key

H81

Multi-Section Key
Multi-Section Key

Security

H85

H41
H12

H34

H78

H56

Cylinder Keyway and
Single Section Key
H1

Available

70 Series (Corbin)
Simplex Keyway.
Z Class bitting.
Reverse of 60.
Security
70
Available
32
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Keyways

Restricted

Key Systems
62 Series (Restricted)
Keyway profiles not shown
for security reasons.
8 keyway multiplex system.
Available 5-, 6- and 7-pin.
Z Class bitting.

62AD

All-Section Key

Multi-Section Key
Cylinder Keyway and
Single Section Key

Security

62AB

Multi-Section Key

62CD

62A

62AD

62B

62D

62AB
62A1
62A2
62B1
62B2
62A
62B

62CD
62C1
62C2
62D1
62D2
62C
62D

62A1

62C1

62A2

62B1

62B2

Available

62C2

62D1

62D2

HO81
HO41

HO Series (Restricted)
Keyway profiles not shown
for security reasons.
8 keyway multiplex system.
Available 5-, 6- and 7-pin.
DH Class bitting.
Security

62C

HO12

All-Section Key
Multi-Section Key
Multi-Section Key
Cylinder Keyway and
Single Section Key

HO85
HO81

HO34

HO41
HO1
HO2
HO3
HO4
HO12
HO34
HO1

HO2

HO3

HO56

HO85
HO5
HO6
HO7
HO8
HO56
HO78

HO4
HO5
93AD

HO6

93AB

Available

HO78

HO7

HO8

93CD

93A

93AD

93B

93C

93D

93AB
93A1
93A2
93B1
93B2
93A
93B

93CD
93C1
93C2
93D1
93D2
93C
93D

93A1

93C1

93A2

93B1

93B2

93C2

93D1

93D2

39AD
39AB

39CD

39A

39AD

39B

39C

39D

39AB
39A1
39A2
39B1
39B2
39A
39B

39CD
39C1
39C2
39D1
39D2
39C
39D

39A1

39C1

39A2

39B1

39B2

39C2

39D1

F41
F12

F34

J12

J34

F41
F1

F12

39D2

J41

F34

J12

J34

33
45078-9/15

62A

62B

62C

62D

62AB
62A1

62A2

62B1
62A

62CD

62B2

62C1
62B

62C2

62D1
62C

62D2

62D

HO81
62A1
62A2
HO41

Keyways

HO12

Key Systems

HO1

62B1
HO81

HO34

HO2
HO12

62B2

HO41
HO3
HO4
HO34

62C1
HO85

62C2

HO56

Keyway profiles not shown
for security reasons.
8 keyway multiplex system.
Available 5-, 6- and 7-pin.
Z Class bitting.
Security

62AD HO2
HO1

HO3
HO12

All-Section Key
62AB

Multi-Section Key

62A

62B

93A

Multi-Section Key
62A1

62A2

62B1

Cylinder Keyway and
Single Section Key

62B2
93A1

93AB
HO1
62C

HO5 HO81
HO6
HO56

HO85
HO7

HO8
HO78
HO85

HO4
HO5
HO34
93AD

62CD
HO2

HO3
62D
93AD

93B

62C1 93AB
62C2
62D1
93A2
93B1
93B2
93A
93B

HO4

HO6

HO7
HO56

93CD
HO5

Available
HO41

39 Series (Protected)
HO12
Keyway profiles not shown
for security reasons.
8 keyway multiplex system.
Available 5-, 6- and 7-pin.
Z Class bitting.
Security

HO1

93A1
39AB
HO56

HO34

93C

HO3

HO4

Multi-Section Key

39A1

Multi-Section Key

93A

Available

93C1
93B

39AD
93B1

39B

HO78
39AD

HO5 39AB
HO6
HO7
39A2
39B1
39B2
39A
39B

93B2

93C2

93C1
39CD

F12

F34
39A2

39A1
93C

93A2

F Series (Protected)
Keyway profiles not shown
for security reasons.
4 keyway multiplex system.
Available 5-, 6- and 7-pin.
Z Class bitting

F2
93C1
F12

39AD

39D

HO8

39CD
39C1 39AD
39C2
39D1
39D2
39C
39D

39C1
39B

39B1
93D

F4
93D1
F34

F3
F12

39A
39A1

39B
39A2

39B1

39C2

39C1

39D

39C2 J3439D1

39D2

J12

J34

F34
F3

J3
J12
J1

J34
J3

39D
39C2

F41

39D1

39D2

J41

F34

J12

Multi-Section Key

F1CylinderF2
F3
Keyway and

39D2

J41

F2
39CD

All-Section Key
F12

39D1
39C
J41

39B2 J1239C1

93D2 J1

39C
39B2

93D2

J41

F3
93C2

39AB

93D

93D1

F41

Cylinder Keyway and
Single Section Key

J Series (Protected)
Keyway profiles not shown
for security reasons.
4 keyway multiplex system.
Available 5-, 6- and 7-pin.
Z Class bitting.

F1
93B2

All-Section Key
Multi-Section Key

Security

Available

93B1

93D2

93C2

39C

F41
93A1

93D1
93C

39CD

39B1
39B2
39A
F41
93CD

93B

HO8

93D

39AB

93AB

HO7

93CD

93B2

93AD 39A2
39A1

Cylinder Keyway and
Single Section Key

HO78

93CD
62D2
93C1 93AD
93C2
93D1
93D2
93C
93D

HO85
93A2

39A

All-Section Key
HO2

93B1
93A

HO8

HO6

93AB
93A1
93A2
HO81

62D2

HO78

HO41

93 Series (Protected)

62D1

J34
J2

Single Section Key

Security

Available
34
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Keyways

Corbin® X Class

Key Systems
57 Series

All-Section Key
8 keyway multiplex system.
Available 5-, 6-, and 7-pin.
X Class bitting.
Multi-Section Key
Reverses
57A1
57A2
57B1
57B2

57AD
57ABC
57A

Multi-Section Key

27B2
27B1
27A2
27A1

57C

57B

57D

Cyl. Keyway and
Single Section Key
57A1

Security

57A2

57B1

57B2

57C1

57C2

57D1

57D2

Not Available

Simplex Keyways
6 independent keyways.
Available 5-, 6- and 7-pin.
X Class bitting.

Security

Not Available

35
45078-9/15

Keyways

Corbin® X Class

Key Systems
27 Series

Multi-Section Key

Reverses

Multi-Section Key

27A1
27A2
27B1
27B2

57B2
57B1
57A2
57A1

27AB

All-Section Key

7 keyways total (5 active).
Available 5-, 6- and 7-pin.
X Class bitting.

027
27A

Cylinder Keyway and
Single Section Key

27A1

27A2

27B1

Not Available

27B2

All-Section Key

7 keyways total (5 active).
Available 5-, 6- and 7-pin.
X Class bitting.
Reverse of 77 Series.

27B

Inactive.
Not used
for new
systems.

Cylinder Keyway and
Single Section Key

67 Series

Security

67AB

Multi-Section Key

Security

067

Multi-Section Key

67A

67B
Not Available

Cylinder Keyway and
Single Section Key
67

67A1

67A2

All-Section Key
7 keyways total (5 active).
Available 5-, 6- and 7-pin.
X Class bitting.
Reverse of 67 Series.

67B2

Inactive.
Not used
for new
systems.

Cylinder Keyway
and Single Section
Key

77 Series

67B1

Security

77AB

Multi-Section Key

077

Multi-Section Key

77A

77B

Not Available

Cylinder Keyway and
Single Section Key
77

77A1

77A2

77B1

77B2

Inactive.
Not used
for new
systems.

Cylinder Keyway
and Single Section
Key
78

36
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Keyways

Russwin® Inactive

Key Systems
981 Series

3 keyway multiplex system.
Available 5-, 6- and 7-pin.
981 Class bitting.

9812

All-Section Key
Cylinder Keyway and
Single Section Key

Security

981

Former 6-pin Designations
Former 7-pin Designations

Not Available

N Series (Obverse)
14 keyways total: N1- N14.
Available 5-, 6- and 7-pin.
N Class bitting.

982

961
971

983

962
972

963
973

All-Section Key

N1x13M

Multi-Section Key

N1-3-9-12M
N1-12M

Multi-Section Key

N2-7-8-10M

N3-9M

N7-10M

N2-8M

Cylinder Keyway and
Single Section Key

Former Designations
6-pin: 1N-14N
5- and 7-pin: 1K-14K

N12

All-Section Key

Security

N10

N1x13M

Simplex Keyway
not entered by
N1x13M.

Cylinder Keyway and
Single Section Key
Not Available

N5*

N11*

N13*

N14

*NOTE: Do not use these pairs in the same keying system with
each other: N1 with N13; N3 with N5; N7 with N11

N Series (Reverse)
14 keyways total: N15- N28.
Available 5-, 6- and 7-pin.
N Class bitting.
Former Designations
6-pin: 15N-28N
5- and 7-pin: 15K-28K
Security

Not Available

All-Section Key

N15x27M

Multi-Section Key

N16-21-22-24M

N15-17-23-26M

Multi-Section Key

N15-26M

N17-23M

N21-24M

N16-22M

N26

N23

N24

N22

Cylinder Keyway and
Single Section Key
N15

N17

N21

N15x27M

All-Section Key

N16
Simplex Keyway
not entered by
N15x27M.

Cylinder Keyway and
Single Section Key
N18

N19*

N20

N25*

N27*

N28

*NOTE: Do not use these pairs in the same keying system with each other:
N15 with N27; N17 with N19; N21 with N25

37
45078-9/15

Keyways

Russwin® Inactive

Key Systems
852 Series

2852

2 keyway multiplex system.
5-pin standard, 6-pin special.
Available with 10 Series
bows only.
No hotel function cylinders.

Simplex Keyways
5-pin only

252

752 uses 752 Class bitting
G uses 852 Class bitting
Available with 10 Series bows only.
No hotel function cylinders.

852

752

Security

Not Available

A Series (Obverse)
12 keyways: A1-A12.
5-pin standard, 6-pin special.
Available with 10 Series
bows only.
A Class bitting.
No hotel function cylinders.
Former Designations
5-pin: 1A-12A
6-pin: 1Z-12Z

All-Section Key

A1x12M

Multi-Section Key

A1-3-9-12M

Multi-Section Key

A1-12M

A4-6-7-10M

A3-9M

A4-7M

A6-10M

Cylinder Keyway and
Single Section Key
A1

A12

All-Section Key

Security

A3
A1x12M

Cylinder Keyway and
Single Section Key
Not Available

A2*

A5*

A11

A10

* NOTE: Do not use these
pairs in the same keying
system with each other: A1
with A2; A4 with A5.

A Series (Reverse)

12 keyways: A13-A24.
5-pin standard, 6-pin special.
Available with 10 Series
bows only.
A Class bitting.
No hotel function
Cylinder Keyway and
Single Section Key
cylinders.
Former Designations
5-pin: 13A-24A
6-pin: 13Z-24Z

Security

A13

A14*

A15

A16

A17*

A18

A19

A20

A21

A22

A23

A24

* NOTE: Do not use these pairs in the same
keying system with each other: A13 with A14;
A16 with A17.

Not Available
38
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Pyramid

Keyways

P3C

Key Systems

P3C
P3C1

Pyramid (Patented)
P3C Series
Keyway profiles not shown
for security reasons.
4 keyway multiplex

P3AB Series

P4EF Series

P3C4

P3C3

P3C4

Multi-Section Key

P3C1

P3C
P3C2
P3C3
P3AB P3C4

Cylinder Keyway and
Single Section Key

P3C1

P3A
P3B
P3AB P3C4
P3C2
P3C3
P3A P3A2
P3A1
P3AB
P3A1
P3A

Multi-Section Key

P3B P3B2
P3B1

P3A2

P3B1
P3B

P3B2

P3AB

Cylinder Keyway and
Single Section Key

All-Section Key

Keyway profiles not shown
for security reasons.
8 keyway multiplex

P3C3

P3C
P3C2

P3C1

All-Section Key

Keyway profiles not shown
for security reasons.
4 keyway multiplex

P3C2

Multi-Section Key
Cylinder Keyway and
Single Section Key

P3A1P3A P3A2

P3B1P3B P3B2
P4EF

P3A1P4E P3A2

P3B1
P4EF P3B2

P4E
P4E2
P4E3 P4EF
P4E4

P4E1

P4E
P4E2

P4E1

P4E3 P4EF
P4E4

P4F
P4F
P4F2
P4F3

P4F1

P4F
P4F2

P4F1

P4F3

P4F4
P4F4

P5AD

P4AD Series

P4E1
All-Section Key

Keyway profiles not shown
for security reasons.
8 keyway multiplex

P5AD Series
Keyway profiles not shown
for security reasons.
8 keyway multiplex

Multi-Section Key
P4E1
Multi-Section Key

Cylinder Keyway and
Single Section Key

All-Section Key

Keyway profiles not shown
for security reasons.
8 keyway multiplex

Multi-Section Key

P5AB P4B2
P4B1
P4B

P5A
P4A2
P5A1

P5A2

P4B2
P5B1

P5C
P4C1
P5B2

P4C2
P5C1

P5D
P4D1

P5C2

P4D2
P5D1

P5D2

P6AD

All-Section Key

Cylinder Keyway and
Single Section Key

P5CD P4D2
P4D1
P4D

P4C1P4C P4C2

P5B
P4B1

Multi-Section Key
Multi-Section Key

P4F
P4AD P4F2
P4F1
P4F3
P5CDP4F4

P4AB
P5A
P5B P4AD
P5C P4CD
P5D
P4E2
P4E3
P4E4
P4F1
P4F2
P4F3
P4F4
P4A
P4B
P4C
P4D
P4AB
P4CD
P5A1
P5A2
P5B1
P5B2
P5C1
P5C2
P5D1
P5D2
P4AD
P4A P4A2
P4B P4B2
P4C P4C2
P4D P4D2
P4A1
P4B1
P4C1
P4D1
P4AB
P4CD
P4AD
P4A1
P4A2
P4B1
P4B2
P4C1
P4C2
P4D1
P4D2
P4A
P4B
P4C
P4D
P5AD
P4AB
P4CD

Multi-Section Key
P4A1P4A P4A2
Cylinder Keyway and
P4A1
Single Section Key

P6AD Series

P4E
P4E2
P4E3
P5ABP4E4

P6AB
P6A
P6A1

P6CD
P6B

P6A2

P6B1

P6C
P6B2

P6C1

P6D

P6C2

P6D1

P6D2

*Note: Each P6 keyway will have its own unique side pin code locations to be assigned by Key Systems Administration. The side pin code is not available
with the other Pyramid keyway families.

P6AD

45078-9/15

P6AB

P6CD

Mortise Cylinder Cams

Lockset Applications

Key Systems
Cams for current products or models
Type

Part Number

Model/Description
Corbin Russwin

A01

Reg.
IC

756F50
Arrow®,
Marks 5000, PDQ
Corbin Russwin

A02

Reg.
IC

756F51

A03

Reg.
IC

756F52

A04

Reg.
IC

756F53

A05

Reg.
IC

756F54

A06

Reg.
IC

756F55

A07

Reg.
IC

756F56

A61

Reg.

562F40

A62

Reg.
IC

756F58

A65

Reg.

025F72

A92

Reg.
IC

756F62

Steel case mortise locks except classroom and institutional privacy functions. Deadbolt
functions of green cast iron case mortise locks. NOT for master ring mortise cylinders.
All mortise functions using Cloverleaf cam.

Baldwin
R. R. Brink
Marks

Steel case mortise lock classroom (55), inside of vestibule (42) and institutional privacy
(69) functions. Most exit device trims. NOT for master ring mortise cylinders.
All mortise locks.
All except CKS.
7000, 9000 and most brands of older black cast iron locks.

Corbin Russwin
Adams Rite®
Lori

DL3000 Series Cylindrical Deadlocks only.
1800 Series, 4015 Deadlocks; 4500 and 4700 Series Latch Locks.
4500, 4600 Series Deadlocks.

Corbin Russwin
Adams Rite
R. R. Brink

Schlage®

Corbin Russwin

DL4000 Series Mortise Deadlocks only.

4070 Series Deadlocks.
“CKS” Control Key Switch.

L9000 Series (Cloverleaf only).

DL4100 Series Deadbolts

Mortise Series deadbolt function master ring locks manufactured since June 10, 1993
(silver case). Adapt earlier (gold case) model to use this cam by installing thumbturn hub
562F41-2.

Corbin Russwin

Mortise Series Master Ring classroom (55) function and inside of vestibule (42) function
mortise locksets.

Corbin Russwin
DORMA

900 Series Mullion, WS700 Series Mullion (Both KRM)
Mortise Locks

Corbin Russwin

Mortise Series: required for master ring deadbolt functions manufactured before
June 10, 1993 (gold case) and for outside of current vestibule (42) function. Optional
for current non-deadbolt functions except classroom (55) and inside of vestibule (42)
function.

Corbin Russwin

Concealed vertical rod exit device outside grip handle operators 01 and 02.

Cams for obsolete Corbin Russwin products or models
A63

121F01

Corbin Russwin

Black cast iron case master ring mortise locks, except models with 1" throw deadbolt.

A64

135F19

Corbin Russwin

Black cast iron case master ring mortise locks with 1" throw deadbolt.

A93

Reg.
IC

Corbin Russwin

610 and 1403 Series Cylindrical Deadlocks.

281F27
362F43

40
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Collars and Master Ring Adapter

Cylinder Accessories
Key Systems

Standard Collars +
Spacers for Flexible Head Cylinders

Spring
253F97

.150" (5/32")

370F29

.125" (1/8")

249F43

.096" (3/32")

370F31

.250" (1/4")

549F51

.156" (5/32") - Ring only

252F82

.315" (5/16")

416F39*

.172" (11/64") security collar; total
projection 13/32"

686F98*

.172" (11/64") security collar; total projection
13/32" (3 wave washers)

303F25

.312" (5/16") for 1-1/8" cylinder on
aluminum door

255F53

Rim cylinder, flush mount

422F88

Rim cylinder, surface mount

197F34

Wave washer

Other Solid Collars
549F52

605F43

428F66

.219" (7/32") - Ring Only

.350" (11/32")

Packet: 549F52 + 253F97
Miscellaneous

429F43

Packet: 549F51 + 249F43

Solid, Recessed for Cylinder Head
700F53

261F54

.090" (3/32") VR trim, double
cylinder 1-1/4"

.094" (3/32") x 2-1/4" O.D. for ED6000 with
T5, T6, T9, T9M, T10, T10M, T11M trim

270F15

.156" (5/32"); total projection 9/32"

598F89*

.156" (5/32"); total projection 9/32"

447F41*

.031" (1/32"); total projection 1/4"

447F42*

.172" (11/64"); total projection 25/64"

610FO1*

.221" (7/32"); total projection 7/16"

610F02*

.289" (9/32"); total projection 1/2"

654F07

.350" (11/32"); total projection 15/32"

447F43*

.375" (3/8"); total projection 19/32"

609F36*

.500" (1/2"); total projection 23/32"

609F37*

.650" (21/32"); total projection 7/8"

609F38*

.850" (27/32"); total projection 1-1/16"

134F05

.510" (1/2") for ED6800 x B5 or G6 and all
ED7400, ED7800 with 1-1/8" cylinder

267F97

.635" (5/8") for ED6800 x O1 or O2 with
1-1/8" and ED6800 x B5 or G6 and all
ED7400, ED7800 with 1-1/4" cylinder

399F48

.750" (3/4") for ED6800 x O1 or O2 with
1-1/4" cylinder

654F08

.550" (9/16"); total projection 11/16"

* Number includes wave washer in packet
+ Refer to corresponding parts and service manuals for correct cylinder collar applications and selection guide

41
45078-9/15

Cylinder Accessories

Collars and Master Ring Adapter

Key Systems
Master Ring Collars +
Solid, Recessed for Cylinder Head
447F44*

.031" (1/32"); total projection 1/4"

447F45*

.172" (11/64"); total projection 25/64"

447F46*

.375" (3/8"); total projection 19/32"

699F81*

.505" (1/2"); total projection 23/32"

261F55

.094" (3/32") X 2-1/4" O.D. for ED6000 with T5,
T6, T9, T9M, T10, T10M, T11M trim

Master Ring Adapter
For installing standard diameter mortise cylinder
in master ring lockset.
Specify 522F93-2.
Order cam separately. See page 40.

Spacers for Flexible Head Cylinders

366F70

.090" (3/32") tapered

370F33

.094" (3/32")

370F35

.281" (9/32")

255F54

Rim cylinder, flush mount

197F35

Wave washer

Miscellaneous

* Number includes wave washer in packet
+ Refer to corresponding parts and service manuals for correct cylinder
collar applications and selection guide

42
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Cylinder Accessories

Pyramid Collars

Key Systems
Collars
• 1-3/4" (44mm) thick door. For other
door thicknesses and trim
considerations, contact Corbin Russwin
Technical Product Support.
• Mortise Cylinders – 1-1/4" (32mm) length

Spring
605F43
(.350)
Mortise Cylinder
High Security Separately (1020, 1030)
Security Separately (1027, 1037)
Mortise Lock
Single Cylinder
Sectional
N Escutcheon
P Escutcheon
M Escutcheon
L & R Escutcheon
T Escutcheon (no collar required)
Double Cylinder
Sectional
N Escutcheon
P Escutcheon
M Escutcheon
L & R Escutcheon
T Escutcheon
V Escutcheon
Auxiliary Locks
DL4011, 4013, 4017
DL4012
Rim Cylinder
High Security Separately (3020, 3030)
Security Separately (3027, 3037)
Exit Devices
ED4000-5000 Series
700 Trim, F2, F3, T13, P9
K1
700M Trim, F2M, F3M, T13M
900 Trim
Cylinder Dogging
ED6000 Series
N3, G4, T3
N4M, G5M
T7M, T9M
ED7000 Series
P4, P6, P7
C4, 03, 05
T11
ED8000 Series
KO
F1, P1, P2 (no collar required)

447F41
(.030)

700F53
(.090)

270F15
(.156)

598F89
(.156)

Solid
447F42
(.172)

610F02
(.289)

447F43
(.375)

654F07
(.350)

267F97
(.635)

Surface Mount
422F88
(.000)

XX
X

X
X
X
X
X

X
X
X
X
X
X
X
X
X
X
X

X
X
X
X
X
X
X
X
X
X
X
X

43
45078-9/15

Plug Diameters/Quick Codes
Key Systems
Corbin Russwin Cylinder Plug Diameters
When combinating Corbin Russwin cylinders, the diameter of the plug determines the set of bottom pin and build-up pin lengths
to use. The plug diameter is either .509" or .552". All Pyramid cylinders have a plug diameter of .496" and have their own pin kit.
Current Corbin Russwin cylinder plug diameters are listed below by product series. Before 1983, however, all Corbin® X Class cylinders
used .509" diameter plugs.
CL3200 Series*
CL3100, CL3300 CL3500, CL3800 Series

Security Bolt
Cylindrical

.509"
.509"

CL3400 & CL3600 Series*

Cylindrical

.509"

CL3700 Series*
CL3900 Series*
CK4200* CL3500, CL3800 Series
CK4300 & CK4400 Series
CK4700 Series
UT5200 Series
DL2200 Series
DL3000 Series
DL3200 Series

Cylindrical
Cylindrical
Cylindrical
Cylindrical
Cylindrical
Unit Lock
Deadlock
Deadlock
Deadlock

.509"
.509"
.552"
.509"
.509"
.552"
.509"
.552"
.509"

IC 6-pin with temporary construction core
IC 6-pin with temporary construction core (Red)
IC 6-pin with temporary construction core (Blue)
IC 6-pin with temporary construction core (Green)
IC 6-pin with disposable temporary core
IC 6-pin with SFIC disposable temporary core1 (Mortise)
IC 6-pin with small format temporary disposable core
IC 7-pin with temporary construction core
IC 7-pin with temporary construction core (Red)
IC 7-pin with temporary construction core (Blue)
IC 7-pin with temporary construction core (Green)
IC 7-pin with disposable temporary core
IC 7-pin with SFIC disposable temporary core1 (Mortise)
Pyramid with temporary construction core

Cylindrical
All

Mortise Cylinders
Rim Cylinders
Interchangeable Cores
Padlocks
Competitors’ Key-in-Lever/Knob
Security, all cylinders
Exit Devices, except IC
A6/N6/PR6 trim and obsolete
NS/AS trim

.552"
.496"
.552"
.552"
.509"
.509"
.552"
.552"
.552"
.509"
.509"

Collar Options - Mortise and Rim Cylinders Only

Cylinder Options
Description

1400/4300 Series (obsolete)
Pyramid Series

Quick Code
CT6
CT6R
CT6B
CT6G
CT6D
CT6SD1
CTSD
CT7
CT7R
CT7B
CT7G
CT7D
CT7SD1
CTP

Description

Quick Code

Collar packet (549F52 + 253F97)

428F66

Rim collar, flush mount

255F53

Rim collar, flush mount (master ring)

255F54

Rim collar, surface mount (standard for rim cylinders)

422F88

Solid collar - .030

447F41

Solid collar - .031 (master ring)

447F44

Solid collar - .090 (VR trim only)

700F53

Solid collar - .094

261F54

Solid collar - .094 (master ring)

261F55

Solid collar - .156

270F15

Solid collar - .156

598F89

Solid collar - .172 (tapered security collar)

416F39

Solid collar - .172

447F42

Pyramid with disposable temporary core

CTPD

Solid collar - .172 (master ring- standard for MR 118 cylinders)

447F45

SFIC 6-pin with less core (rim and mortise)

CLS6

Solid collar - .221

610F01

SFIC 7-pin with less core (rim and mortise)

CLS7

Solid collar - .289

610F02

Bump-resistant cylinders

BRP

Solid collar - .312

303F25

Solid collar - .350

654F07

Solid collar - .375

447F43

Solid collar - .375 (master ring)

447F46

Solid collar - .500

609F36

Solid collar - .510

134F05

Solid collar - .550

654F08

Solid collar - .635

267F97

Solid collar - .650

609F37

Solid collar - .749

399F47

Solid collar - .850

609F38

Spacer for flexible head cylinders - .125

370F29

Spacer for flexible head cylinders - .250

370F31

Spacer for flexible head cylinders - .315

252F82

Spacer for flexible head master ring cylinders - .094

370F33

Spacer for flexible head master ring cylinders - .281

370F35

Spacer for flexible head master ring cylinders (tapered) - .090

366F70

Spring collar - .150 (standard for 118 cylinders)

253F97

Spring collar - .219

549F52

Spring collar - .350 (standard for 114 cylinders)

605F43

Keying Options
Description
0-bitted with 2 blank keys (except HS, CHS)
Keyed random
Keyed alike
Keyed to specific bitting (specify bitting)
Uncombinated
Construction master keyed

Quick Code
(standard)
KR
KA
KS
UC
CMK

Key Quantity Options
(standard)2
2 change keys per cylinder2
Other than 2 change keys per cylinder
KY#
(i.e. customer requests 6 change keys per cylinder)
(i.e., KY6)
No change keys
KY0
Master keys (if required)3
Specify Qty.
Specify Qty.
Control keys (if required)3
Specify Qty.
CMK keys (if required)3
CMK control keys (if required)3
Specify Qty.
Specify Qty.
SKD control keys (if required)3
Specify Qty.
Special purpose keys, i.e., ENG (if required)3
1
Corbin Russwin does not furnish permanent SFIC cores
2
Keys shipped separately for security and Pyramid master keyed cylinders
3
Order as cut keys
*Discontinued

44
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Quick Codes/How to Order
Key Systems
KeyBow Options

Stamping Options*
Description

Quick Code

Keys stamped with bitting number

(standard)

No keyset or bitting stamping on keys

VKC0

Keys only stamped with keyset (standard for HS, CHS,
PS, PHS, PCS, PCHS)

VKC1

Keys stamped with keyset, cylinders stamped with
keyset on face of plug - not available for HS, CHS, PS,
PHS, PCS, PCHS

VKC2

Keys stamped with bitting, cylinders stamped with
keyset on face of plug - not available for HS, CHS, PS,
PHS, PCS, PCHS

VKC3

Keys stamped with keyset, cylinders stamped with
keyset in concealed location

CKC2

Keys stamped with bitting, cylinders stamped with
keyset in concealed location- not available for HS, CHS,
PS, PHS, PCS, PCHS

CKC3

Less Trade Mark (No Corbin Russwin logo on cylinders)

LTM

*see page 6 for detailed descriptions

Description

Quick Code

Corbin Russwin logo

(standard)

Plain both sides

KB11

Do Not Duplicate

KB12

US Property Do Not Duplicate

KB13

Protected Do Not Duplicate (only for protected keyways)

KB19

Restricted Do Not Duplicate (only for restricted keyways)

KB19

Pyramid (only for Pyramid keys)

KB28

Large bow, plain both sides

KB51

Large bow, Do Not Duplicate

KB52

Large bow, US Property Do Not Duplicate

KB53

Large bow, protected Do Not Duplicate
(only for protected keyways)

KB19

Large bow, Restricted Do Not Duplicate
(only for restricted keyways)

KB59

Security bow Corbin Russwin logo (only for security keys)

KB90

Security bow plain both sides (only for security keys)

KB91

Security bow, Do Not Duplicate (only for security keys)

KB92

Security bow, US Property Do Not Duplicate
(only for security keys)

KB93

Security bow, protected Do Not Duplicate
(only for security keys, protected keyways)

KB99

Security bow, Restricted Do Not Duplicate
(only for security, restricted keyways)

KB99

How to Order Cylinders
Mortise Separately
Keyset

Cylinder

Length

Cam

Pins

Keyway

Finish

AA1

1000

118

A01

626

Rim Separately
Keyset

Cylinder

Length

Pins

Keyway

Finish

AA1

3000

058

626

Key-in-Lever/Knob Separately
Keyset

Cylinder

Lockset Series

Pins

Keyway

Finish

AA1

2000

033

626

IC Cores Separately
Keyset

Cylinder

Pins

Keyway

Finish

AA1

8000

626

45
45078-9/15

Service Equipment

Pin Kits

Key Systems
Single System Pin Kits
For the end user with one Corbin Russwin System 70 keying
system to maintain. Each kit has all pins necessary to combinate
interchangeable core and master ring cylinders, as well as
conventional cylinders (both .509" and .552" plug diameters).
Furnished in a handsomely finished hardwood case with
combinating instructions on the inside of the lid. Includes key
gauge, tweezers and both diameter plug followers.
PK-70-ZDH
For pinning all types of cylinders (except security) with Z Class
keyways: 59, D, H and L Series, plus 60, 70 and restricted/
protected keyways using System 70 depths (1-6).

PK-70-ZDH
PK-70-X
PK-70-N

PK-70-X
For pinning all types of cylinders with X Class keyways: 27, 57,
67 and 77 Series, plus AR, BR, BL, 97 and 99 using System 70
depths (1-6).
PK-70-N
For pinning all types of cylinders with N Class keyways: N1-N28
using System 70 depths (1-6).
Security Pin Kit
PK-70-HS
For security cylinders, including interchangeable core, Brink
and blockout function. Furnished in a handsomely finished
hardwood case with combinating instructions on the inside of
the lid. Includes tweezers.
Deluxe Pin Kit
PK-1070
Ideal for locksmiths and distributor service personnel who must
service a variety of Corbin Russwin keying systems. Also for end
users with Pre-System 70 keying systems.
Contains all pins required to combinate standard, IC and master
ring cylinders. Accommodates System 70 and non-System
70 for both plug diameters and all key classes. Furnished in a
reinforced steel case with combinating instructions on the inside
of the lid. A separate, removable, two-sided chart contains pin
lengths for all modern key classes. Includes tweezers and both
diameter plug followers.

PK-70-HS

PK-1070

PK-20-HS
Each pin kit has all the pins necessary to combinate standard
and interchangeable core Pyramid High Security cylinders.
Includes tweezers, plug follower, key gauge and combinating
instructions.
PK-20-PS
Each pin kit has all the pins necessary to combinate standard
and interchangeable core Pyramid Security Cylinders.
Includes tweezers, plug follower, key gauge and combinating
instructions.

PK-20-HS

Pyramid Sample Display Case
S-20-DC
Contains sample Master Keyed Cylinders and information
materials.
46
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Replacement Pin for Kits

Service Equipment
Key Systems

For a complete listing of all Cylinder Components, refer to Cylinder/Owner’s Manuals.

How to Order Conventional Pins

Suffix 3-digit length in thousandths of an inch to base number.
Example: .160" bottom pin is 553F484-160.
Description

Number

Specify quantity of vials (100 pins/vial):
Bottom Pins (L Series)

553F48-4 + length

Master/Top/Build-up Pins

553F49-2 + length

TOP PIN (M)
(J) Spool Pin

(M Series)
Spool Top Pins (J Series)

553F50-2 + length

Specify quantity of vials (1500 balls/vial):
Construction Balls

MASTER PIN (M)

546F97-8

• Pins are packaged in a secure, spill-proof plastic vial with hinged top.
• 12 vials per master carton.

How to Order Security Pins

BOTTOM PIN (L)

Replace the “x” in the part number with the pin's skew number.
Bottom pins use skews L (1) and R (2).
Master pins use skews L (1), R (2) and S (3).
Example: #2 master pin with S skew is 407T334-097.
Description
Specify quantity of pins (must be multiple of 20):
Bottom Pin, #2
Bottom Pin, #3
Bottom Pin, #4
Bottom Pin, #5
Bottom Pin, #6
Master Pin, #2
Master Pin, #3
Master Pin, #4
Top Pin #1 (long)
Top Pin #2 (short)

Number
407T4x4-242
407T4x4-270
407T4x4-298
407T4x4-326
407T4x4-354
407T3x4-097
407T3x4-125
407T3x4-153
407T43-4193
407T43-4158

How to Order Pyramid Security Pins

Suffix 3-digit length in thousandths of an inch to base number.
Description
Specify quantity of vials (100 pins/vial):
Bottom Pins (Nickel Silver)
Master/Build-up Pins/Top
(Brass)

BOTTOM PIN

695F244 + length
695F252 + length

Suffix 3-digit length in thousandths of an inch to base number.

TOP PIN

Number
695F247 + length
695F257 + length

How to Order Pyramid Bump Resistant Pins
Description
Specify quantity of vials (100 pins/vial):
Size A
Size C

MASTER PIN

Number

How to Order Pyramid High Security Pins
Description
Specify quantity of vials (100 pins/vial):
Bottom Pins (Stainless Steel)
Master/Build-up Pins/Top
(Stainless Steel)

TOP PIN

MASTER PIN

Number
628F107142
628F107236

How to Order Pyramid P6 Side Pins
Description
Specify quantity of vials (20 pins/vial):
P6 Side Pin

Number

BOTTOM PIN

630F494

47
45078-9/15

Service Equipment

Replacement Pin for Kits

Key Systems
Cylinder Tool Kit No. CT-93
Kit No. CT-93 contains the following items (also available separately):
CT-4

Follower for 509" diameter plugs

CT-11

Key gauge for Corbin® X and Z Class System 70 and pre-System 70

CT-19

Tweezers

CT-21

Key gauge for Russwin® N Class System 70 and pre-System 70

CT-22

Key gauge for Russwin DH Class System 70 and pre-System 70

CT-23

Key gauge for Russwin 981 and 852 Classes

CT-26

Waldes Tru-Arc pliers (see below for full description)

CT-54

Follower for .552" diameter plugs

Other Tools

Pyramid Tools
CT-20

Pyramid plug follower (.495" diameter)

CT-5

Pin Chamber Reamer

CT-20K

Key Gauge for Pyramid

CT-7

Pin Chamber Burring Tool

CT-10

Loading tool for CK4400 Series and IC cylinder shells

Cylinder Installation Wrench No. CT-80
CT-80 is for interchangeable core mortise cylinders. It is used to:
• Install and remove Corbin Russwin interchangeable core mortise
cylinder housing without marring cylinder scalp finish.
• Test cam operation before fastening the mortise cylinder set screw.
• Align the pins of the throw member before installing the core.

CT-80

Waldes Tru-Arc Pliers

No. CT-25

No. CT-26

No. CT-27

When rekeying or exchanging cylinders
in CK4200 and UT5200 Series knobs,
this tool is used to remove the large knob
shank retaining ring to gain access to the
cylinder.

When rekeying CK4200 and UT5200
Series cylinders, this tool is used to remove
the plug retainer.

When rekeying or exchanging cylinders
in UT5200 Series Unit Lock lever handles,
this tool removes and installs the cylinder
retaining ring.

48
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

Other Cylinder Parts

Service Equipment
Key Systems
Screws
438F41 -8
Cam screw, mortise cylinder and RFC padlocks
438F42-8
Cam screw, IC mortise cylinder
488F08-8
Mortise cylinder set screw packet (1 screw), standard cylinder size
488F10-8
Mortise cylinder set screw packet (1 screw), master ring
021F68-8
Rim cylinder mounting screw, 2-9/32" long for 1-3/8" - 2-1/2" doors
021F71-8
Rim cylinder mounting screw, 3-1/8" long for 2-3/4" - 3-1/2" doors
Disposable Core 10 Packs
627F00-9
Corbin Russwin LFIC
707F21-9
Corbin Russwin SFIC
Tailpieces
655F00-8
5/8" horizontal for rim cylinder 3000-058
655F01-8
5/8" horizontal for IC rim cylinder 3080-058
582F29-8
1-1/4" horizontal for IC rim cylinder 3080-114
490F55-8
1-3/8" horizontal for rim cylinder 3000-138
253F85-8
1-7/8" horizontal for IC rim cylinder 3080-178
483F09-8
1-7/8" vertical for IC rim cylinder 3080-178V
253F76-8
2" horizontal for rim cylinder 3000-200
413F48-8
2" vertical for rim cylinder 3000-200V
284F13-8
3-1/8" horizontal for IC rim cylinder 3080-318
253F77-8
3-1/2" horizontal for rim cylinder 3000-312
413F49-8
3-1/2" vertical for rim cylinder 3000-312V
778F778
For 2000-031 & 2000-031H cylinders
778F768
For 2000-031-7 & 2000-031H-7 cylinders
622F30-8
For 2000-033 & 2000-034-7 cylinders
622F29-8
For 2000-034-6 cylinder
682F29-8
For 2000-037 & 2000-033-7 cylinders
596F89-8
For 2000-038 cylinder
489F02-8
For 2000-051 cylinder
680F60-8
For 2000-039 cylinder
681F60-8
For 2000-039L cylinder
Rim Cylinder Back Plates
253F75-8
For standard and Pyramid rim cylinders
135F10-8
For master ring rim cylinders
Retainers
173F79-8
.020" thick for 2001 -051 cylinder
368F91-8
.030" thick for rim, 2200, 2210 & 3000 Series cylinders
488F92-8
.032" thick for CK4200 and 1400/4300 Series locks
333F99-7
For CK4400 Series Locks, 4300 Series Cylinders, 8000 cores and Pyramid
655F41-5
For 3080 IC rim cylinder
680F64-5
Threaded cap for 2000-033, 034, 037, 039, Security & Pyramid KIL cylinders
585F31-2
Cap pin for above
Springs (Ordered in multiples of 100)
585F32-7
For 2000-033, 034, 037, 039, Security & Pyramid KIL cap pin)
172F21-7
IC Conventional & Security
603F20-7
Fixed Core Conventional & Security
026F75-7
Hotel Mortise blocking pin
697F50-7
All Pyramid Cylinders
314F98-7
For 2001-034 indicator
Spring Covers
217F42-2
5-pin brass (Rim/Mortise/IC)
217F44-2
6-pin brass (Rim/Mortise/IC/Pyramid IC)
314F88-7
6-pin stainless (2000 Series Knob/Lever)
217F43-2
7-pin brass (Rim/Mortise/IC/Pyramid Rim & Mortise)
585F39-7
7-pin stainless (2000 Series Lever/Pyramid KIL/KIK)
411F092
Pyramid KIL/KIK for other manufacturers products (2200 Series)
Padlock Parts
362F15-3
Throw member for IC & RFC padlocks (A)
793F592 (606 finish)
Cylinder sleeve for RFC padlocks (B)
438F41-8
Mounting screw for RFC padlocks (C)

49
45078-9/15

Policies and Procedures
Key Systems
Procedures

Corbin Russwin keying systems utilize the
Standard Key Coding System illustrated
on the following pages. To ensure prompt
and accurate processing, purchase orders
should be written using these key symbols
to describe each master keyed item.
In addition to the key symbol, Corbin
Russwin requires the following information
on the keying system for ALL orders:
• End User (job) Name
• City, State, Zip Code
• Special key bows or key stamping
• VKC/CKC requirements (see page 6)
New Systems or New Branches of
Existing Systems
Indicate system expansion in terms of
estimated numbers of key combinations,
not doors. All of this information is
essential at the inception of a keying
system in order for Corbin Russwin to
ensure accommodation of the end user’s
present and future needs. Advise as
follows:
• How many levels of keying?
• Plan for a construction master key?
• Any selective master keys, such as ENG?
• How many changes for each master?
• How many masters for each grand
master? If mixing Corbin Russwin
cylinder types, indicate clearly where
each type of cylinder will be used within
the expansion parameters:
• Which masters or grands have
security cylinders under them?
• Which have interchangeable cores?
• Which have master ring?
• Which have conventional cylinders?
Existing System Add-Ons
For prompt processing, orders must
include a positive identification for the
keying system in addition to the job name,
city, state and zip code. Any ONE of the
following is positive ID:
• Registry number stamped on any existing
factory master key
• Previous factory order number together
with the year of that order

Letters of Authorization

XYZ Corporation

No letter is needed when the items are to
be drop shipped directly to the end user.
In all other cases, to preserve the security
of the end user’s keying system, Corbin
Russwin requires a letter of authorization
on the end user’s letterhead to obtain the
following:

1 Main St.
Anytown, USA 00001
(203) 555-5555
(Current Date)
Corbin Russwin Architectural Hardware
Key Systems Dept.

• Bitting lists
• Security blanks and cut keys
• Master level cut keys
• Protected key blanks, cylinders and plugs
• Pyramid key blanks, cylinders, and plugs
The letter of authorization can be brief
but should include a specific description of
what is being authorized for release, and a
positive key system identification.

Pyramid Key Discard Policy
U.S. Utility Patent number 6,125,674
protects Pyramid keys from unauthorized
duplication until the year 2018.
It is essential that cut keys and key blank
distribution policies and procedures be
maintained and enforced for all Pyramid
products.
Authorized Pyramid Distributors
Pyramid is a system-based product. An
authorized distributor can stock Pyramid
upon specific written authorization from
the primary systems administrator of the
facility. Authorized distributors have the
ability to receive product, key product,
cut keys and distribute the product to the
facility.
Authorized Pyramid distributors who
carry inventory for a specific system must
provide valid receipts and disbursements
of all Pyramid products, specifically key
blanks/cut keys. All Pyramid key blanks
to be maintained in the possession of an
authorized Pyramid distributor must be
accounted for. Any defective, incorrectly
cut or damaged Pyramid key blanks
must be retained in the distributor’s
possession to be reviewed and collected
by a representative of ASSA ABLOY Door
Security Solutions.

We authorize Acme Distributors to obtain a
copy of the bitting list for our keying system
GGMX5555. We also authorize them to order
the quantities of master keys on our attached
purchase order 1234AB.

Sincerely,

Gordon Morris
Security Director

Pyramid Primary System
Administrators
Any defective, incorrectly cut or damaged
Pyramid key blank must be destroyed.
Pyramid Key Warranty
Pyramid key blanks are covered by a
5-year warranty as outlined in the current
list price book.

Pyramid Registration Certificates
For each Pyramid system established
the designated owner’s representative
will receive a Pyramid Owner’s binder
containing registration certificates specific
to their system. Registration
certificates will contain the facility
registration number along with the
facility name and location and must be
signed by an authorized representative
for the facility. Each order submitted for
Pyramid product must be accompanied
by a registration certificate. Additional
certificates will be obtainable through
Key Systems Administration.
Facility Registration

Facility Name
Address #1
Address #2
City
State
Authorized Representative

m
a
S

System Registry + Zip Code
+ Certificate Number

e
l
p
Zip

Print
Distributor

PO#

50
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

2- and 3-Level Systems

How to Establish Key Systems
Key Systems

To Specify a Simple Master Key System
(2 Levels of Keying)
The master key symbol consists of TWO
letters, such as AA. The change key
numbers are added to the master key
letters. The numbers come FIRST: 1AA,
2AA, 3AA, etc.

1AA

To Specify a Grand Master Key System
(3 Levels of Keying)
The grand master is assigned any ONE
letter, such as A. The master keys under
this grand are assigned TWO letters, the
first of which must be the same as the
grand: AA, AB, AC, etc. are all masters
under grand A. Masters BA, BB, BC, etc.,
are all under grand B. Caution: Do not use
the letters I, O or Q because of possible
confusion with the numerals 1 and 0,
respectively. Also do not use the letter
X due to confusion with cross keying.
Change key numbers come after the
letters.

2AA

3AA

SKD1

For master keys beyond AZ, insert a
numeral between the letters to designate
which pass through the alphabet they
represent. A2A through A2Z represents
the second pass of masters under grand
A. A3A through A3Z would be the third.
Change keys under these masters have the
numbers suffixed in the usual way: A2A1,
A2A50, etc.
If the cylinder is to be operated by its
change key and nothing lower than the
single lettered GMK, the change number
is added to the GMK symbol. This is
illustrated by the example A1 in the
schematic shown.

When locks are required which are not
operated by ANY master keys or other
change keys in the system, they are
referred to as “single keyed” and given
symbols SKD1, SKD2, etc.
When all higher levels of master keys are
to be disallowed, suffix (NMK) to the
symbol of the key which is to operate. This
means “not master keyed” and can be
applied to any level in the system. Cylinder
AA1 (NMK) is operated by AA1 only. The
AA master and A grand are blocked from
operation. Cylinder AA (NMK) would be
operated by the AA master only. Grand A
does not operate.

Grand Master Key

Master Key

Change Keys

“not master keyed.” Cylinder 1AA(NMK)
is operated by 1AA only. The AA master is
blocked from operation.

Master Key

Change Keys

When locks are required which are not
operated by the master key or other
change keys in the system, they are
referred to as “single keyed” and given
symbols SKD1, SKD2, etc. When all
higher levels of master keys are to be
disallowed, suffix (NMK) to the symbol of
the key which is to operate. This means

AA1

AA2

AA3

AB1

AB2

SKD1

51
45078-9/15

How to Establish Key Systems

4-Level Systems

Key Systems
To Specify a Great Grand Master Key
System (4 Levels of Keying)

under the grand (A1, B1, etc.) and masters
beyond AZ are handled exactly as in the
3-level system already described.

The great grand master key is assigned
the symbol GGM. The rest of the symbols
are the same as those in 3-level systems:
The GMKs are assigned single letters, e.g.,
A, B, C, D, etc. Caution: Never use X for
a grand master key due to the confusion
which will result with cross keying symbols
presented on page 52.

Changes directly under a grand are also
handled as illustrated in the 3-level system.
For changes directly under the GGM
with no intermediate level masters, the
change number is added directly to GGM
as shown by the example GGM1 in the
schematic.

Masters under each GMK are assigned two
letters, the first of which is the same as its
respective grand master key. Change key
numbers come after the letters. Changes

When locks are required which are not
operated by ANY master keys or other
change keys in the system, they are
referred to as “single keyed” and given

symbols SKD1, SKD2, etc.
When all higher levels of master keys are
to be disallowed, suffix (NMK) to the
symbol of the key which is to operate. This
means “not master keyed” and can be
applied to any level in the system. Cylinder
AA1 (NMK) is operated by AA1 only.
The AA master, A grand and GGM are
all blocked from operation. Cylinder AA
(NMK) is operated by the AA master only.
Grand A and the GGM do not operate.
Cylinder A (NMK) would be operated by
the A grand only, without the GGM.

GGM

Great Grand Master
Key

Grand Master Key

Change Keys

Master Key
AA1

AA2

AA3

Selective Master Keys
It is often useful in large keying systems
to issue a high level master key to
maintenance personnel which allows
access across all master and grand master
key boundaries of a keying system. A
selective master key is usually very close
to the system's top master key, both
physically and through its realm of access.
Nevertheless, it must be blocked from
operating in many areas.
The most common names and symbols for
selective master keys are:
ENG
ATT
JAN
HKP
GRD
MAIN

Engineer’s key
Attendant’s key
Janitor’s key
Housekeeper’s key
Guard’s key
Maintenance

AB1

AB2

BA1

GGM1

To designate that a lock be operated by
a selective master key, suffix the symbol
in parentheses to the standard symbol.
Example: AA1 (ENG). This must be added
every time the selective key is to operate
and left off whenever the selective key is
NOT to operate. For instance, you may
lay out a system in which key AA1 is to
operate two different offices. Inside one
of them is an electrical cabinet which must
be accessible to maintenance personnel
carrying the ENG

BB2

SKD1

I.ike cross keying, a selective master key
is a convenience feature which decreases
the security of the cylinders it operates and
limits the expansion and flexibility of the
overall keying system.

GGM
ENG
B

AA2

BB1

key. That lock must be specified as AA1
(ENG) while the lock for the other office
must be specified as AA1. Change keys
directly under the selective key, such as
ENG1, are operated by all higher level
keys, such as GGM.

AA1

AA3

AB1

AB2

BA1

BA2

BB1

BB2

BB3

52
Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

45078-9/15

How to Establish Key Systems
Key Systems
Convenience May Reduce Cylinder
Security and Hinder System Expansion
Whenever two or more different keys such
as AA1 and AA2 are both required to
operate the same cylinder, the cylinder's
security is reduced. This is called cross
keying. When the cross keying occurs
under all the same higher level keys, such
as AA1 and AA2, it is known as controlled
cross keying. When it combines keys under
different higher level keys, such as AA1
and AB1, it is known as uncontrolled cross
keying.
In addition to reducing the security of
the cylinder, cross keying usually imposes
limits on the flexibility and expansion of
the overall keying system. This is especially
true of uncontrolled cross keying. For
these reasons, it is strongly recommended
to allow personnel to carry more than one
key. Cross keying should be discouraged
whenever possible. However, when
cross keying is required, it is specified as
follows, and should be summarized at the
beginning of each order.

Case #1
Cylinder requires its own change key.
The illustration depicts part of a small
medical building where two doctors share
a common receptionist. The receptionist
gets the AA3 key. Each doctor carries a
key which operates only one office, but
is also cross keyed into the entrance from
the corridor.

XAA3
Receptionist

AA2
Office 1

Determine the symbol of the change key
(example: AA3). Then prefix the letter X
(example: XAA3). Then list all keys which
are to operate in an “operated by . . .”
phrase. Example: “XAA3 operated by
AA1, AA2, AA and A”. Note that X is a
cylinder specification only. The keys for
cylinder XAA3 are designated AA3.

AA1
Office 2

XAA3 operated by AA1, AA2, AA and A.

Case #2
Cylinder does NOT require
its own change key. This
illustration depicts a section
of a floor in a dormitory.
Each student's bedroom key
operates the hall door lock.
There is no need to construct
a key which operates only
the hall door.

AA1

AA2

AA3

AA4

AA5

AA6

X1X

In this case, place an X at
both the beginning and end
of the symbol and a number
X1X operated by AA1 through AA6, AA and A.
between them. Example:
X1X, X2X, etc. Again, always
include the “operated by . . .” phrase
with a complete listing of key symbols to
operate.

53
45078-9/15

In U.S.
Corbin Russwin
Architectural Hardware
225 Episcopal Road
Berlin, CT 06037
Phone: 800-543-3658
Fax: 800-447-6714
www.corbinrusswin.com
In Canada
ASSA ABLOY Door
Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario
Canada L4K 4T9
Phone: 800-461-3007
Fax: 905-738-2478
www.assaabloy.ca

For more information regarding Corbin Russwin Locksets,
Exit Devices, Door Controls and Key Systems, contact your
authorized Corbin Russwin Distributor or Sales Representative.

Corbin Russwin and Design® is a registered trademark of Corbin Russwin, Inc., an ASSA ABLOY Group company. Other products’ brand names may be trademarks or
registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under US copyright laws. All contents current at
time of publication. Corbin Russwin, Inc., an ASSA ABLOY Group company reserves the right to change availability of any item in this catalog, its design, construction, and/or
its materials. Copyright © 2001-2015 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
45078-9/15

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Instance ID                     : uuid:fc130032-aa5c-1042-b32c-b9b3e09f72c6
Document ID                     : xmp.did:1348E9E38D2068118C14BA74778A598C
Original Document ID            : adobe:docid:indd:f7fb708e-ff97-11df-8890-d09ce346676e
Rendition Class                 : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:54847AEC0F2068118C14BF6BDD6F4A01, xmp.iid:55847AEC0F2068118C14BF6BDD6F4A01, xmp.iid:FF9915F0102068118C14BF6BDD6F4A01, xmp.iid:B94295BC112068118C14BF6BDD6F4A01, xmp.iid:C5508088132068118C14BF6BDD6F4A01, xmp.iid:2BA6DADF142068118C14BF6BDD6F4A01, xmp.iid:0FD4CB961A2068118C14BF6BDD6F4A01, xmp.iid:A1F746011B2068118C14BF6BDD6F4A01, xmp.iid:D38763031C2068118C14BF6BDD6F4A01, xmp.iid:8BFBF0B61D2068118C14BF6BDD6F4A01, xmp.iid:6B5C2B091E2068118C14BF6BDD6F4A01, xmp.iid:FF9561752B2068118C14BF6BDD6F4A01, xmp.iid:7672EE1E2D2068118C14BF6BDD6F4A01, xmp.iid:F13F66DA2D2068118C14BF6BDD6F4A01, xmp.iid:8E56CEEA982168118C14BAF615BB2166, xmp.iid:B50191389C2168118C14BAF615BB2166, xmp.iid:6E57DC049D2168118C14BAF615BB2166, xmp.iid:0B0F2C779E2168118C14BAF615BB2166, xmp.iid:6C604EE79E2168118C14BAF615BB2166, xmp.iid:EF0BEA55002168118083F83CA2CC9C1A, xmp.iid:1F6B2B9A7D2068118C14FA820B81FAD4, xmp.iid:BA8D75E2C02168118C14FA820B81FAD4, xmp.iid:120EA2017221681180838537BBD293F2, xmp.iid:C100DE5CB42168118A6DE437780123D5, xmp.iid:E0CE2967B62168118A6DE437780123D5, xmp.iid:1AC03974072068118C14B9C4B104D4FB, xmp.iid:C55C5298092068118C14B9C4B104D4FB, xmp.iid:88C8CE130A2068118C14B9C4B104D4FB, xmp.iid:C1F148270A2068118C14B9C4B104D4FB, xmp.iid:D489FA190D2068118C14B9C4B104D4FB, xmp.iid:80A0C3E1A52068118C14B9C4B104D4FB, xmp.iid:A94C1D9AA72068118C14B9C4B104D4FB, xmp.iid:681877B7A72068118C14B9C4B104D4FB, xmp.iid:691877B7A72068118C14B9C4B104D4FB, xmp.iid:4CBF279BA92068118C14B9C4B104D4FB, xmp.iid:1FBCA252182068118C14A486350C2E37, xmp.iid:64A842EC182068118C14A486350C2E37, xmp.iid:6B9DB7D63F2268118C14A486350C2E37, xmp.iid:218B2D55412268118C14A486350C2E37, xmp.iid:4C5636FC212068118C14BA74778A598C, xmp.iid:2471A2E28D2068118C14BA74778A598C, xmp.iid:1348E9E38D2068118C14BA74778A598C, xmp.iid:E95E16B18E2068118C14BA74778A598C, xmp.iid:1097C8CE9A2068118C14BA74778A598C, xmp.iid:734352760C2068118A6D897A0E4C6DC5, xmp.iid:CAA04970A92068118A6D897A0E4C6DC5, xmp.iid:310BA18FFC2268118A6D897A0E4C6DC5, xmp.iid:88CF65B0742068118C14A63A9AC46102, xmp.iid:709F4CB10E2068118A6D88EB4C1F3997, xmp.iid:627C49AA102068118A6D88EB4C1F3997, xmp.iid:919EFF5C122068118A6D88EB4C1F3997, xmp.iid:90CF4CBE492068118DBB925A0D0B205D, xmp.iid:C2686C7F2A20681188C682C7F7E40B58, xmp.iid:F834539F2E20681188C682C7F7E40B58, xmp.iid:93A39918182068118C14F35A41817C15, xmp.iid:10A10BF0192068118C14F35A41817C15, xmp.iid:58663C7F2E20681188C6F2C83FB8570A, xmp.iid:F8C0AA113820681188C6F2C83FB8570A, xmp.iid:A2A9B9A34E2068118A6DFB5E317BE335, xmp.iid:64CBF2FAB82068118A6DFB5E317BE335, xmp.iid:66D4D41A132068118C149A6DD2B7AAC0, xmp.iid:18F010AF462068118C149A6DD2B7AAC0, xmp.iid:66A8902A6D2068118C149A6DD2B7AAC0, xmp.iid:3685DA59232068118C14E313E6108DD9, xmp.iid:3A36EC75072068118C1487B6E051F04A, xmp.iid:568F83D95E2068118A6DB88793B9798D, xmp.iid:B9C4A6A2DF2068118083AF29EF312C26, xmp.iid:09C60B84CB21681188C6DD69AA33EE1B, xmp.iid:62AE40EDD021681188C6DD69AA33EE1B, xmp.iid:6CEE3F7D742068118FD3C672B7A7F045, xmp.iid:A70A4DCD752068118FD3C672B7A7F045, xmp.iid:05FC1862792068118FD3C672B7A7F045, xmp.iid:0CB3D9DC7F2068118FD3C672B7A7F045, xmp.iid:E63A0A8F6820681188C6CA80FE7DB6C3, xmp.iid:F837F5112B21681188C6CA80FE7DB6C3, xmp.iid:7A0ACB487B21681188C6CA80FE7DB6C3, xmp.iid:5DA776DCAD21681188C6CA80FE7DB6C3, xmp.iid:6DCE1535B321681188C6CA80FE7DB6C3, xmp.iid:FDA04698B621681188C6CA80FE7DB6C3, xmp.iid:A4E11075072068118083F8C7DBD7EB11, xmp.iid:EF56380C0B2068118083F8C7DBD7EB11, xmp.iid:027E1EA40E2068118083F8C7DBD7EB11, xmp.iid:FF04A846102068118083F8C7DBD7EB11, xmp.iid:67E5EA74072068118C14E9AC1FBAB710, xmp.iid:4A45EF0DEE20681180839011206EB6EC, xmp.iid:6C514588F320681180839011206EB6EC, xmp.iid:2C67BF5BC72068118083EB84393E8D12, xmp.iid:7C1C8364E42068118083EB84393E8D12, xmp.iid:5C588FE69A2068118C14DA9028C5746B, xmp.iid:7E8AFE0AA02068118C14DA9028C5746B, xmp.iid:BBE1B9B1A12068118C14DA9028C5746B, xmp.iid:A23490AEB52068118C14DA9028C5746B, xmp.iid:1BCBCA74072068118C149BE8457E7891
History When                    : 2010:12:02 11:19:13-05:00, 2010:12:02 11:19:14-05:00, 2010:12:02 11:26:29-05:00, 2010:12:02 11:32:12-05:00, 2010:12:02 11:45:04-05:00, 2010:12:02 11:54:40-05:00, 2010:12:02 12:35:34-05:00, 2010:12:02 12:38:33-05:00, 2010:12:02 12:45:46-05:00, 2010:12:02 12:57:56-05:00, 2010:12:02 13:00:14-05:00, 2010:12:02 15:51:24-05:00, 2010:12:02 16:03:18-05:00, 2010:12:02 16:08:32-05:00, 2010:12:12 08:41:03-05:00, 2010:12:12 09:04:41-05:00, 2010:12:12 09:10:24-05:00, 2010:12:12 09:20:45-05:00, 2010:12:12 09:23:53-05:00, 2010:12:17 14:25:31-05:00, 2010:12:21 12:19:07-05:00, 2010:12:27 08:14:57-05:00, 2011:01:08 08:20:11-05:00, 2011:01:22 10:42:22-05:00, 2011:01:22 10:56:58-05:00, 2011:01:22 11:13:17-05:00, 2011:01:22 11:28:36-05:00, 2011:01:22 11:32:03-05:00, 2011:01:22 11:32:36-05:00, 2011:01:22 11:53:42-05:00, 2011:01:25 13:41:27-05:00, 2011:01:25 13:53:46-05:00, 2011:01:25 13:54:35-05:00, 2011:01:25 14:02:49-05:00, 2011:01:25 14:08:06-05:00, 2011:01:29 12:07:19-05:00, 2011:01:29 12:11:37-05:00, 2011:02:04 10:36:47-05:00, 2011:02:04 10:47:28-05:00, 2011:02:10 11:08:42-05:00, 2011:02:11 09:18:52-05:00, 2011:02:11 09:18:55-05:00, 2011:02:11 09:24:39-05:00, 2011:02:11 10:51:23-05:00, 2011:02:11 13:58:49-05:00, 2011:02:12 08:42:33-05:00, 2011:02:18 10:31:18-05:00, 2011:04:08 08:57:38-04:00, 2011:06:09 18:33:48-04:00, 2011:06:09 18:47:55-04:00, 2011:06:09 19:00:04-04:00, 2011:09:10 10:08:12-04:00, 2011:11:21 10:16:38-05:00, 2011:11:21 10:46:10-05:00, 2012:01:28 11:25-05:00, 2012:01:28 11:38:11-05:00, 2012:01:30 12:24:24-05:00, 2012:01:30 13:32:55-05:00, 2012:02:28 19:16:13-05:00, 2012:03:01 12:16:24-05:00, 2012:09:25 14:25:46-04:00, 2012:09:26 06:50-04:00, 2012:09:26 11:25:28-04:00, 2012:10:25 10:52:04-04:00, 2013:07:01 13:57:14-04:00, 2013:11:23 11:11:05-05:00, 2013:11:28 08:48:56-05:00, 2013:12:17 15:47:45-05:00, 2013:12:17 16:26:29-05:00, 2014:03:14 13:42:10-04:00, 2014:03:14 13:51:34-04:00, 2014:03:14 14:17:13-04:00, 2014:03:14 15:03:35-04:00, 2014:03:17 11:34:18-04:00, 2014:03:18 10:46:40-04:00, 2014:03:19 11:44:03-04:00, 2014:03:20 09:11:18-04:00, 2014:03:20 09:49:34-04:00, 2014:03:20 10:13:49-04:00, 2015:09:07 09:34:42-04:00, 2015:09:07 10:00:24-04:00, 2015:09:07 10:26:07-04:00, 2015:09:07 10:37:49-04:00, 2015:09:08 09:29:54-04:00, 2015:09:09 15:41:20-04:00, 2015:09:09 16:20:33-04:00, 2015:09:22 11:37:34-04:00, 2015:09:22 15:05:22-04:00, 2015:09:24 10:28:45-04:00, 2015:09:24 11:05:33-04:00, 2015:09:24 14:13:47-04:00, 2015:09:25 08:11:50-04:00, 2015:09:25 14:48:33-04:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:2471A2E28D2068118C14BA74778A598C
Derived From Document ID        : adobe:docid:indd:f7fb708e-ff97-11df-8890-d09ce346676e
Derived From Original Document ID: adobe:docid:indd:f7fb708e-ff97-11df-8890-d09ce346676e
Derived From Rendition Class    : default
Create Date                     : 2015:10:02 17:52:13-04:00
Modify Date                     : 2015:10:02 17:52:57-04:00
Metadata Date                   : 2015:10:02 17:52:57-04:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9370 bytes, use -b option to extract), (Binary data 12024 bytes, use -b option to extract)
Doc Change Count                : 6288
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 54
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools

Corbin Russwin Key Systems Aadss1004918

Navigation menu

Versions of this User Manual:

Views

Navigation