Corning Optical Communication LITENNA0LF0SB0 In Building Repeater User Manual Litenna Data Sheet
Corning Optical Communication Wireless In Building Repeater Litenna Data Sheet
Contents
- 1. Litenna Installation Guide
- 2. Litenna Data Sheet
Litenna Data Sheet
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 126444 |
| Application ID | t6B+OK6DeFaxSRClxmRJCg== |
| Document Description | Litenna Data Sheet |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.53kB (256564 bits) |
| Date Submitted | 2000-11-22 00:00:00 |
| Date Available | 2000-11-22 00:00:00 |
| Creation Date | 2000-05-02 18:59:33 |
| Producing Software | Acrobat Distiller 4.0.2 for Macintosh |
| Document Lastmod | 2000-10-01 07:09:29 |
| Document Title | Litenna Data Sheet |
Litenna™ Block Diagram Litenna™ RHU #1 Litenna™ Base Unit ©Sadna 5/2000 Fiberoptic Tx #1 RF In (Sector 2 Opt.) Fiberoptic Tx #8 Fiberoptic Rx #1 RF Fiberoptic Tx #1 RF HPA LNA In-Building RF Distribution System Filters & Diplexers Down Link RF In (Sector 1) Litenna™ RHU #8 Up Link Fiberoptic Rx #1 Fiberoptic Rx #8 RF Fiberoptic Rx #8 Fiberoptic Tx #8 RF HPA RF Out (Sector 2 Opt.) LNA Filters & Diplexers RF Out (Sector 1) Mechanical Dimensions 19” Base Unit Remote Hub Unit Base Unit Front Panel Remote Hub Unit Front Panel 11” 12” Optical In/Out Optical Out Base Unit Back Panel Optical In 8” 1U RF In Alarm RF Out Supported Standards STANDARDS Foxcom Wireless Ltd. Ofek One Center - Building B Northern Industrial Zone Lod, Israel 71293 Tel: +972-8-918-3888 Fax: +972-8-918-3844 E-mail: sales@foxcomwireless.com Foxcom Wireless Inc. Ordering Information UL/DL (MHz) CDMA 800 TDMA/AMPS 800 824-849 / 869-894 LMR 800 806-824 / 851-869 GSM 900 890-915 / 935-960 CDMA 1800 1715-1780 / 1805-1870 GSM 1800 1710-1785 / 1805-1880 CDMA 1900 TDMA 1900 GSM 1900 Compliant with all existing wireless voice and data services Product Single Band Family 9A110 = AMPS/TDMA 800 9A112= LMR 800 9A130 = CDMA 800 9A220 = GSM 900 9A320 = GSM 1800 9A330 = CDMA 1800 9A410 = TDMA 1900 9A420 = GSM 1900 9A430 = CDMA 1900 Dual Band Family 9B320 = Dual band GSM 900/1800 Supports GPRS, EDGE, CDPD and WAP technologies 9XXXX - XXX - XX Reserved Part RHU = Remote Hub Unit B4U = Base Unit Four Ports B8U = Base Unit Eight Ports 1850-1910 / 1930-1990 8150 Leesburg Pike Suite 600 Vienna, Virginia 22182 Tel: 703-848-0200 Fax: 703-848-0280 E-mail: salesna@foxcomwireless.com Website: www.foxcomwireless.com 2” Cellular Antennas Available Accessories SC/APC Jumper Local Power Supply Fully Redundant Power Supply Fully Redundant Power Supply For Indoor use only. All specifications are subject to change without prior notice. Easily upgradable from single band to multi band and future services, 3G ready Single infrastructure for multiple services/ multiple operators Built-in alarms / monitors for all channels Singlemode fiberoptic cables connect between the system units Easy to design, install and maintain Order Code 5m 25W 110/220V 100W 110/220V 300W 110/220V SC/APC-J-5 LPS-25-48 LPS2-100-48 The Litenna™, fiberoptic based distribution system, enables wireless service operators and LPS2-300-48 integrators to provide seamless coverage and enhanced cellular capacity for In-building applications. Comprised of a Base Unit that connects up to eight Remote Hub Units (driving up to four antennas each), the fiberoptic technology based system is modular and expandable to a wide variety of structure sizes and configurations. The Litenna supports wireless voice and data applications, offering a cost-effective and flexible solution for coverage enhancement. © Foxcom Wireless 2000. Doc. No. 42-13-002-20-A RF Specifications Downlink General Technical Specifications GSM CDMA LMR Optical Specifications TDMA Dual Band Wavelength (nm) 1310±10 900/1800 Max. Optical budget (dB) 3dB Nominal Output Power At Antenna Fiber type 9/125 single mode Port Per Carrier per band(dBm) Optical loss per mated pair connectors 0.5 dB maximum ≥1.0 Link Specifications 1800 800 1900 900 1800 1900 800 1900 800 Composite 14 14 14 11 11 17 10 20 20 17 Optical output power (mW) 2 carriers 10 10 10 14 17 17 14 Other Specifications 3 carriers 12 – 15 15 12 Distance between BU and RHU (m) @18AWG(1) – – – – 10 10 DC power is supplied via composite cable 500 @ 48VDC / 250 @ 27VDC 14 10 10 10 14 14 10 DC power is supplied directly to RHU 2000 10 carrie Nominal Gain at Antenna Port (dB) Nominal Input Power 1. Distance increases with correlation to cable diameter. Per Carrier per band (dBm) Composite 2 carriers -3 3 carriers -5 -1 -1 -1 -1 – 10 carriers – – – -6 -6 -3 – -4 -4 -3 ±1.5 ±1.8 ±2.0 ±1.8 ±1.8 ±2.0 ±1.8 ±1.5 ±1.5 ±2.0 ±1.2 – ±1.4 – – ±1.4 – ±1.2 ±1.2 ±1.4 Physical Specifications Specifications Base Unit Remote Hub Unit Power 18-48VDC 18-48VDC - DC input or: 27-48VDC - fed through composite cable 8W max. when driving 8 RHUs 10 W max. Singleband 4W max. when driving 4 RHUs 15 W max. Dualband Dimensions 19” x 1U 11”W x 8”L x 2”H RF Connector N Type Female N Type Female Optical Connector SC/APC SC/APC Gain Flatness (dB) Over Band Over Block Max. Second Order Intermodulation Distortion (IMD) (dBm) – – – – -36/-30 – – -13 -36 -30 -13 Max. Intermodulation Distortion (IMD) (dBm) Composite Cable Specifications -36/-30 -13 -13 Waveform Quality ( ) at Max. Power >0.96 – – – – Specifications Spurious Emission (BW=30kHz) (dBc) >45@± 885 KHz – – – – Cable Type Single Mode Fiber 2.8 mm Tight Buffer Jacket <0.1 – – – Copper Diameter 18AWG Standard Compliance UL Listed Cable / IEC -332-33 System Group Delay (µ s) Alarm Specifications Base Unit Alarms Uplink GSM CDMA LMR TDMA The Litenna™ Base Unit alarms are Dry Contacts and Open Collector types. The Dry Contacts opens when the alarm is active. The Open Collector will sink up to 30mA under alarm condition. All alarms are connected to the Base Unit rear panel 25 pin D type connectors. Dual Band Link Specifications 800 1800 1900 900 1800 1900 900/1800 800 800 1900 Nominal Gain At Antenna Port (dB) Min. Input IP3 (dBm) -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 Max. NF (dB) 20 20 16 20 20 16 20 20 20 16 Over Band ±1.5 ±1.8 ±2.0 ±1.8 ±1.8 ±2.0 ±1.8 ±1.5 ±1.5 ±2.0 Over Block ±1.2 – ±1.4 – – ±1.4 – ±1.2 ±1.2 ±1.4 72 Gain Flatness (dB) SFDR (dB) 72 65 65 72 Waveform Quality ( ) at Max. Power >0.96 – – – – Spurious Emission (BW=30kHz) (dBc) >45@± 885 KHz – – – – <0.1 – – – – 74 System Group Delay (µ s) 74 Alarm Function Optical Link Indicates that the two direction optical link between Base Unit and Remote Hub Unit are not functioning LED Specifications Base Unit LEDs The Base Unit has three types of LEDs. One type indicates the power status. One type indicates that the lasers are functioning. One type indicates the status of link operations between the Base Unit and the RHU-one LED for every RHU. All LEDs should be on when the unit is in operation. LED Name LED Function Channel 1..8 Indicates that both directions of the optical link, between Base Unit and Remote Hub Unit, is functioning - one LED for every RHU link. Lasers 1..4 Indicates that laser circuitry for RHU 1-4 is functioning correctly. Lasers 5..8 Indicates that laser circuitry for RHU 5-8 is functioning correctly. DC Indicates that the power is on. Absolute Maximum Rating Specifications Base Unit Remote Hub Unit Remote Hub Unit LEDs Total Input RF Power (dBm) 20 10 On the Front Panel of the RHU there are two LEDs. Both LEDs should be on when the unit is in operation. Power Supply (V) 60 60 LED Name LED Function Operating Temperature (ºC)1 0 to +50 0 to +50 Opt. Indicates that the Received Optical Power is functioning within specifications. Storage Temperature (ºC) -40 to +85 -40 to +85 DC Indicates that the power is on. 1. For extended temperature range (-20 to 60ºC) contact Foxcom Wireless. RF Specifications Downlink General Technical Specifications GSM CDMA LMR Optical Specifications TDMA Dual Band Wavelength (nm) 1310±10 900/1800 Max. Optical budget (dB) 3dB Nominal Output Power At Antenna Fiber type 9/125 single mode Port Per Carrier per band(dBm) Optical loss per mated pair connectors 0.5 dB maximum ≥1.0 Link Specifications 1800 800 1900 900 1800 1900 800 1900 800 Composite 14 14 14 11 11 17 10 20 20 17 Optical output power (mW) 2 carriers 10 10 10 14 17 17 14 Other Specifications 3 carriers 12 – 15 15 12 Distance between BU and RHU (m) @18AWG(1) – – – – 10 10 DC power is supplied via composite cable 500 @ 48VDC / 250 @ 27VDC 14 10 10 10 14 14 10 DC power is supplied directly to RHU 2000 10 carrie Nominal Gain at Antenna Port (dB) Nominal Input Power 1. Distance increases with correlation to cable diameter. Per Carrier per band (dBm) Composite 2 carriers -3 3 carriers -5 -1 -1 -1 -1 – 10 carriers – – – -6 -6 -3 – -4 -4 -3 ±1.5 ±1.8 ±2.0 ±1.8 ±1.8 ±2.0 ±1.8 ±1.5 ±1.5 ±2.0 ±1.2 – ±1.4 – – ±1.4 – ±1.2 ±1.2 ±1.4 Physical Specifications Specifications Base Unit Remote Hub Unit Power 18-48VDC 18-48VDC - DC input or: 27-48VDC - fed through composite cable 8W max. when driving 8 RHUs 10 W max. Singleband 4W max. when driving 4 RHUs 15 W max. Dualband Dimensions 19” x 1U 11”W x 8”L x 2”H RF Connector N Type Female N Type Female Optical Connector SC/APC SC/APC Gain Flatness (dB) Over Band Over Block Max. Second Order Intermodulation Distortion (IMD) (dBm) – – – – -36/-30 – – -13 -36 -30 -13 Max. Intermodulation Distortion (IMD) (dBm) Composite Cable Specifications -36/-30 -13 -13 Waveform Quality ( ) at Max. Power >0.96 – – – – Specifications Spurious Emission (BW=30kHz) (dBc) >45@± 885 KHz – – – – Cable Type Single Mode Fiber 2.8 mm Tight Buffer Jacket <0.1 – – – Copper Diameter 18AWG Standard Compliance UL Listed Cable / IEC -332-33 System Group Delay (µ s) Alarm Specifications Base Unit Alarms Uplink GSM CDMA LMR TDMA The Litenna™ Base Unit alarms are Dry Contacts and Open Collector types. The Dry Contacts opens when the alarm is active. The Open Collector will sink up to 30mA under alarm condition. All alarms are connected to the Base Unit rear panel 25 pin D type connectors. Dual Band Link Specifications 800 1800 1900 900 1800 1900 900/1800 800 800 1900 Nominal Gain At Antenna Port (dB) Min. Input IP3 (dBm) -2 -2 -2 -2 -2 -2 -2 -2 -2 -2 Max. NF (dB) 20 20 16 20 20 16 20 20 20 16 Over Band ±1.5 ±1.8 ±2.0 ±1.8 ±1.8 ±2.0 ±1.8 ±1.5 ±1.5 ±2.0 Over Block ±1.2 – ±1.4 – – ±1.4 – ±1.2 ±1.2 ±1.4 72 Gain Flatness (dB) SFDR (dB) 72 65 65 72 Waveform Quality ( ) at Max. Power >0.96 – – – – Spurious Emission (BW=30kHz) (dBc) >45@± 885 KHz – – – – <0.1 – – – – 74 System Group Delay (µ s) 74 Alarm Function Optical Link Indicates that the two direction optical link between Base Unit and Remote Hub Unit are not functioning LED Specifications Base Unit LEDs The Base Unit has three types of LEDs. One type indicates the power status. One type indicates that the lasers are functioning. One type indicates the status of link operations between the Base Unit and the RHU-one LED for every RHU. All LEDs should be on when the unit is in operation. LED Name LED Function Channel 1..8 Indicates that both directions of the optical link, between Base Unit and Remote Hub Unit, is functioning - one LED for every RHU link. Lasers 1..4 Indicates that laser circuitry for RHU 1-4 is functioning correctly. Lasers 5..8 Indicates that laser circuitry for RHU 5-8 is functioning correctly. DC Indicates that the power is on. Absolute Maximum Rating Specifications Base Unit Remote Hub Unit Remote Hub Unit LEDs Total Input RF Power (dBm) 20 10 On the Front Panel of the RHU there are two LEDs. Both LEDs should be on when the unit is in operation. Power Supply (V) 60 60 LED Name LED Function Operating Temperature (ºC)1 0 to +50 0 to +50 Opt. Indicates that the Received Optical Power is functioning within specifications. Storage Temperature (ºC) -40 to +85 -40 to +85 DC Indicates that the power is on. 1. For extended temperature range (-20 to 60ºC) contact Foxcom Wireless. Litenna™ Block Diagram Litenna™ RHU #1 Litenna™ Base Unit ©Sadna 5/2000 Fiberoptic Tx #1 RF In (Sector 2 Opt.) Fiberoptic Tx #8 Fiberoptic Rx #1 RF Fiberoptic Tx #1 RF HPA LNA In-Building RF Distribution System Filters & Diplexers Down Link RF In (Sector 1) Litenna™ RHU #8 Up Link Fiberoptic Rx #1 Fiberoptic Rx #8 RF Fiberoptic Rx #8 Fiberoptic Tx #8 RF HPA RF Out (Sector 2 Opt.) LNA Filters & Diplexers RF Out (Sector 1) Mechanical Dimensions 19” Base Unit Remote Hub Unit Base Unit Front Panel Remote Hub Unit Front Panel 11” 12” Optical In/Out Optical Out Base Unit Back Panel Optical In 8” 1U RF In Alarm RF Out Supported Standards STANDARDS Foxcom Wireless Ltd. Ofek One Center - Building B Northern Industrial Zone Lod, Israel 71293 Tel: +972-8-918-3888 Fax: +972-8-918-3844 E-mail: sales@foxcomwireless.com Foxcom Wireless Inc. Ordering Information UL/DL (MHz) CDMA 800 TDMA/AMPS 800 824-849 / 869-894 LMR 800 806-824 / 851-869 GSM 900 890-915 / 935-960 CDMA 1800 1715-1780 / 1805-1870 GSM 1800 1710-1785 / 1805-1880 CDMA 1900 TDMA 1900 GSM 1900 Compliant with all existing wireless voice and data services Product Single Band Family 9A110 = AMPS/TDMA 800 9A112= LMR 800 9A130 = CDMA 800 9A220 = GSM 900 9A320 = GSM 1800 9A330 = CDMA 1800 9A410 = TDMA 1900 9A420 = GSM 1900 9A430 = CDMA 1900 Dual Band Family 9B320 = Dual band GSM 900/1800 Supports GPRS, EDGE, CDPD and WAP technologies 9XXXX - XXX - XX Reserved Part RHU = Remote Hub Unit B4U = Base Unit Four Ports B8U = Base Unit Eight Ports 1850-1910 / 1930-1990 8150 Leesburg Pike Suite 600 Vienna, Virginia 22182 Tel: 703-848-0200 Fax: 703-848-0280 E-mail: salesna@foxcomwireless.com Website: www.foxcomwireless.com 2” Cellular Antennas Available Accessories SC/APC Jumper Local Power Supply Fully Redundant Power Supply Fully Redundant Power Supply For Indoor use only. All specifications are subject to change without prior notice. Easily upgradable from single band to multi band and future services, 3G ready Single infrastructure for multiple services/ multiple operators Built-in alarms / monitors for all channels Singlemode fiberoptic cables connect between the system units Easy to design, install and maintain Order Code 5m 25W 110/220V 100W 110/220V 300W 110/220V SC/APC-J-5 LPS-25-48 LPS2-100-48 The Litenna™, fiberoptic based distribution system, enables wireless service operators and LPS2-300-48 integrators to provide seamless coverage and enhanced cellular capacity for In-building applications. Comprised of a Base Unit that connects up to eight Remote Hub Units (driving up to four antennas each), the fiberoptic technology based system is modular and expandable to a wide variety of structure sizes and configurations. The Litenna supports wireless voice and data applications, offering a cost-effective and flexible solution for coverage enhancement. © Foxcom Wireless 2000. Doc. No. 42-13-002-20-A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2000:05:02 18:59:33 Producer : Acrobat Distiller 4.0.2 for Macintosh Modify Date : 2000:10:01 07:09:29-07:00 Page Count : 4EXIF Metadata provided by EXIF.tools