Coros Wearables COROS Smart Cycling Helmet User Manual

Coros Wearables Inc. Smart Cycling Helmet

User manual

OMNIQuick Start Guidewww.coros.com
OMNISmart Cycling HelmetStrapTri-glide splittersBuckleO-RingOver ear bone conduction headsetPower buttonLED lightExpanded polystyrenePaddingPolycarbonate shellWind Resistant MicrophoneList of ContentsSmart Helmet, Smart Remote and Mount, Micro-USB Charging Cable, Emergency Identification Card, COROS™ Helmet Bag, Reflective Decal, VisorPAGE 1 PAGE 2Bone Conduction Audio. The integrated open ear Bone Conduction Audio system delivers precision audio and full environmental awareness. No ear buds and no wires means you can direct your attention where it should be - on the road!Smart Communication. Precision audio for music, phone calls, ride data, and voice navigation. Voice Navigation. Allows you to set up and record turn by turn directions to your destination and receive audio instruction from start to finish.Music Player. Bluetooth connection is integrated with the mobile app.Emergency Alert System. When the helmet experiences an impact, it will send a SMS text alert to your pre-selected emergency contact.Tail Light. Tail light for safe cycling day or night. Light activation is automatic based on ambient light. Automatic feature can be disabled via smart remote.
How to Wear Your Helmet How to Wear Your Helmet, cont.PAGE 3 PAGE 4Warning: Please do not wear an improperly sized helmet even after adjusting its fastening system.Put the helmet on your head as shown in Fig.1. Slide the tri-glide splitters just below your earlobes. Next, adjust the location of the buckle to provide even tension between your neck and head. Finally, adjust the knob on the regulator for proper integration.• Fig.1 shows the correct way to wear the helmet. Always wear the helmet with the strap and buckle fastened, and with the strap pulled tight and positioned back against the throat. The leading edge of the helmet should land just above the eyebrows.• Fig. 2 illustrates the incorrect position for the helmet. Failure to wear the helmet properly may cause discomfort to the rider or even cause the helmet to shift or fall off during an accident.• The tri-glide splitter as shown in Fig. 3 is a key component for positioning the helmet. Adjust the tri-glide splitters on each side of the helmet so that the left strap and right strap come together just under the earlobes.• Fig. 4 shows how the chin strap also plays an important part role in positioning the helmet. Adjust the length of the strap and the location of the buckle to create a comfortable, yet firm tightness around your chin and head.Fig. 1. Correct Fig. 2. Incorrect Tri-glidesplittersFig. 3. Fig. 4.O-Ring
• The COROS™ helmet is equipped with an adjustable fit system which helps stabilize the helmet when worn in the correct position while riding. Fig. 5 shows where to locate the adjustable knob. Turn the knob clockwise to tighten and counter-clockwise to loosen.ChargingPlease fully charge up your OMNI helmet before using. To charge the helmet, open the Micro USB protective cover, located at the back of helmet. Next, plug the data line into the Micro USB interface, as shown in Fig. 7.Turning On/OffTo turn the helmet ON, hold the Power button for 3 seconds until you hear the word “pairing”. To turn the helmet OFF, hold the Power button for 3 seconds until the LED indicator light turns off.• Fig. 6 shows how the helmet will look from the front when adjusted correctly.How to Wear Your Helmet, cont. How to Operate Smart FunctionsPAGE 5 PAGE 6Control knobFig. 6.Fig. 5.Fig. 7.
4. To connect to COROS™ smart devices, launch the COROS™ Helmet App. Wait for a few seconds, the App will automatically connect to the COROS Helmet. (see Fig. 10)Connecting the Smart Remote1. Pairing: Tap on Smart Remote under Device to enter the Pair interface (see Fig. 11). Click the “Match” button (see Fig. 12) and then press and hold any key on the Smart Remote until the “Successfully Paired” message appears.Pairing your COROS Helmet1. See www.coros.com for compatible IOS and Andriod devices.2. To pair your helmet to your phone, first power on the helmet. On your phone, turn Bluetooth “On”. To enter the Bluetooth Pairing interface, find OTHER DEVICES, and select “COROS™ Helmets”. (See Fig. 8)3. Download the COROS™ Helmet APP. (see Fig. 9).PAGE 7 PAGE 8Fig. 9.Fig. 8.Fig. 10. Fig. 11. Fig. 12.CorosHelmet GoOption1: Search and Download >Option 2:Scan Quick Response Code >In the App Store, search and find“Coros Helmet”. Download andsave it directly to your phone.Android / IOS - Apple
2. Mounting your Smart Remote: Your package contains the Smart Remote, plus the remote holder and 2 rubber rings. Find a spot on your bicycle handlebar to mount the holder, near your right or left hand (Fig. 14, Image 1). Position the first rubber ring at one corner of the holder and stretch the ring diagonally to catch on the opposite corner as shown in Image 2. Attach the second rubber ring to the other two corners. Image 3 shows the holder installed correctly, with the Smart Remote placed into position. Note: the orientation of the Smart Remote is flexible based upon the rider’s preference.Smart Remote FunctionsPAGE 9 PAGE 10Fig. 14.Image 1.Image 2.Image 3.Function Status Audible ReminderPlay or pause musicPick up or hang up call12345Refuse callPause cyclingResume cyclingVolume upPrevious trackVolume downNext trackLight manually onLight manually offAuto lightPress Button 1Press Button 1Press button 1 for 2 secondsPress button 2Press button 2Press button 3Press button 3 for 2 secondsPress button 4Press button 4 for 2 secondsPress Button 5Press Button 5Press Button 5One beep-two beepsone beep with voice "cycling paused"one beep with voice "cycling resumed"One beepOne beepOne beepOne beepWith voice "light on"With voice "light off"With voice "Auto light"13542
SpecificationsSafety Tail LightPAGE 11 PAGE 12VisorMICLEDBone Conduction SpeakerPCBASwitch buttonRemovable visor, interchangeable accessoryLatest silicon mic, improved call and wind resistance qualitySafety cycling light and light sensor. Light activated based on daylight and onset of darkness. 3 RGB LED per side.Improved 2nd generation bone conduction audioMain PCBA, Power controller PCBA, Power switch PCBAImproved and convenient user operationBattery 700mAh Li-thion batteryAdjust System Adjustable fit systemPadding Hot-press lining + EVA paddingHelmet/Chin StrapAdjustable strap helps properly position the helmet for safety and audio operation.LED lightFunctionSafety light for day or night cycling Red light On: 1s / Off: 1sWorking Status Green light (lowest brightness)Flash every 15s (remaining 500ms)ChargingCharging --Red light(lowest brigtness)Fully charged-- Green light(lowest brigtness)Charging -- Flash every 15sFully charged -- Flash every 15s Power on Green light Light on for 1sPower off Red light Light on for 3sBluetooth connected Blue light Light on for 1sLighting color Frequency
1. Unable to power on helmetTry charging the helmet from 1 to 2 hours.2. After power on, the helmet automatically powers off after a shortperiod of use.Perform a “hard reset” by pressing the power button for a period of 10 seconds.3. No response for remote pair and operation.After several failed attempts to pair the helmet, please contact COROS™ support at www.coros.comFor complete troubleshooting information, please visit www.coros.comTroubleshooting of Electronic FunctionsCOROS™ warrants the original purchaser of this product that the product is free of defects in material and workmanship for a period of one year(US & CA & AU)/two years(EU) from the original date of purchase. This warranty does not apply to defects of physical damage resulting from neglect, abuse, improper repair, use, or fit, alterations, or any use unintended by the manufacturer. COROS™ does not warranty any helmet damaged due to heat or contact with solvents. This warranty is in lieu of all other agreements and warranties, general or special, express or implied and no representative or person is Limited WarrantyPAGE 13 PAGE 14Music Play Time 8+ hours play / talkCharge Interface Micro USBElectrical Input DC 5V / 1ACharging Time 2 hoursStandby Time Up to 180 daysBluetooth ProfileSpeaker OutputSpeaker VolumeMic SensitivityBLE, A2DP, HFP, SPP, AVRCP, HSP0.5W*285±3dB﹣42± 3dBBluetooth Operational Distance Up to 33 feet
Model: OMNIC.P.S.C.16 CFR Part 1203United States Federal Safety Standard for Bicycle Helmets(Consumer Product Safety Commission)CE, EN1078 (Europe Safety Standard)FCC ID: YNGHA002-0001FCC Part 15B,Part 15CCE R&TTE Directive 1999/5/ECAS/NZS 2063:2008 (Australia/New Zealand Bicycle Helmet Safety Standard)Safety Certifications This manual covers important information with respect to safety, operation and maintenance of the helmet, please read it carefully before initial use.1. No helmet can protect its user from all unforeseeable accidents, including those involving bicycle-to-motor vehicle collisions. The COROS™ helmet is designed to protect the head and cannot guard against cervical, spine or other body injuries that may result from an accident.2. The helmet is designed to be retained by a strap under the lower jaw. It is not intended for motorsport, moped or other uses.3. To be effective, the helmet must fit properly and be worn correctly. Securely fasten retention system as shown on page 3-5. Grasp the helmet and try to rotate it to front and rear. A correctly fitted helmet should be comfortable and should not move forward to obscure vision or rearward to expose the forehead.4. No attachments should be made to the helmet except those recommended by the helmet manufacturer.5. The helmet is designed to absorb shock by partial destruction of the shell and liner. This damage may not be visible. Therefore, if subjected to a severe blow, the helmet should be returned to coros under the impact replacement program. visit www.coros.com for more information.General Safety, Use and CarePAGE 15 PAGE 16authorized to assume liability on behalf of COROS™ in connection with the sale or use of this product. This warranty program covers all parts of your COROS™ product and applies to all types of defects or failure, except for loss. If your COROS™ helmet is found to be defective in materials or workmanship within one year(US & CA & AU)/two years(EU) from the date of purchase, COROS™ or the country distributor will at its sole option either repair or replace the helmet free of charge.6. The helmet may be damaged and rendered ineffective by petroleum and petroleum products, cleaning agents, paints, adhesives, etc., without the damage being visible to the user.7. A helmet has a limited lifespan and should be replaced when it shows obvious signs of wear.8. This helmet should not be used by children while climbing or doing other activities where there is a risk of hanging or strangulation should the child become trapped Please keep the helmet out of reach from children under fi ve.9. Please exercise care and good judgment whenever you ride. Comply with all traffic laws and regulations and do your part to avoid accidents of any kind.10. Do not modify or remove any original components of your helmet, other than as recommended by COROS™. Doing so will void all COROS™ warranties.11. Keep your helmet charged with the USB charging adapter.12. Please mount the Smart Remote into the holder before each use.13. The product can be upgraded online through the COROS™ Application. Do not terminate power or force the helmet to turn off in the course of upgrading; this could lead to booting failures.14. The COROS™ helmet is water resistant.
Clean the helmet with mild soapy water. Avoid use of specific solvents such as ammonia, bleach, paints, abrasives or hydrocarbons which may damage the helmet and cause it to fail to protect the head in the accident.COROS™ Wearables Inc.3310 Noble Pond Way, Suite 207 Woodbridge, VA 22193 USAinfo@coros.comFor updated product and mobile app information, please visit www.coros.comMaintenance1. Keep the helmet far away from high temperatures over 65.5C or 149.9F, as it may cause damage to the helmet. Do not place the helmet into dark colored vehicles or store it in tightly sealed containers or bags where high heat can accumulate and causedamage to the helmet. Do not use the helmet if it has been deformed by heat.2. Make sure the helmet is clean and dry after each use. Store the helmet in a dry and ventilated location.StorageContactPAGE 17 PAGE 18This manual covers important information with respect to safety, operation and maintenance of the helmet, please read it carefully before initial use.1. No helmet can protect its user from all unforeseeable accidents, including those involving bicycle-to-motor vehicle collisions. The COROS™ helmet is designed to protect the head and cannot guard against cervical, spine or other body injuries that may result from an accident.2. The helmet is designed to be retained by a strap under the lower jaw. It is not intended for motorsport, moped or other uses.3. To be effective, the helmet must fit properly and be worn correctly. Securely fasten retention system as shown on page 3-5. Grasp the helmet and try to rotate it to front and rear. A correctly fitted helmet should be comfortable and should not move forward to obscure vision or rearward to expose the forehead.4. No attachments should be made to the helmet except those recommended by the helmet manufacturer.5. The helmet is designed to absorb shock by partial destruction of the shell and liner. This damage may not be visible. Therefore, if subjected to a severe blow, the helmet should be returned to coros under the impact replacement program. visit www.coros.com for more information.6. The helmet may be damaged and rendered ineffective by petroleum and petroleum products, cleaning agents, paints, adhesives, etc., without the damage being visible to the user.7. A helmet has a limited lifespan and should be replaced when it shows obvious signs of wear.8. This helmet should not be used by children while climbing or doing other activities where there is a risk of hanging or strangulation should the child become trapped Please keep the helmet out of reach from children under fi ve.9. Please exercise care and good judgment whenever you ride. Comply with all traffic laws and regulations and do your part to avoid accidents of any kind.10. Do not modify or remove any original components of your helmet, other than as recommended by COROS™. Doing so will void all COROS™ warranties.11. Keep your helmet charged with the USB charging adapter.12. Please mount the Smart Remote into the holder before each use.13. The product can be upgraded online through the COROS™ Application. Do not terminate power or force the helmet to turn off in the course of upgrading; this could lead to booting failures.14. The COROS™ helmet is water resistant.
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu