Corsran Technology K200 Super Long Talking Time Bluetooth Mono Headset User Manual Manual

Shenzhen Corsran Technology Co., Ltd. Super Long Talking Time Bluetooth Mono Headset Manual

Manual

Using instruction 1、Wearing
left right 2、 Instructions： Key Function：
1） ON/OFF-----Headset with intelligent voice prompts. 2） Volume keys Long press the volume + key for the next song, long press the volume - key for the previous song. 3） Answer hang up keys A. Answer or end end calls; double-click redial recent calls. B. When listening to the music,click to pause, and then click to play C. Press 3S into a trailer two pairing mode. 2、Charge: 1）This product uses a lithium-ion polymer battery,for the first time charging needs about three hours to charge. 2）When charing appears in red light , and blue light when fully charged. 3）You can not use this product while charging . 3、Pairing: (First use must be paired with the phone to use, after use will automatically connect) 1) First, verify that your phone has Bluetooth capabilities.2) Open the phone Bluetooth function, Meanwhile Bluetooth headset boot into pairing mode. 3) Use the phone's Bluetooth feature to search for Bluetooth devices,Select the device connected to the find.
4) Headset one for two (phone) pairing: A cell phone when the headset is connected, then disconnected A cell phone or shut down, Then B cell phone is turned on and search for devices connected to the phone, then restart A cell phone for further connection , after that ,the phone will automatically connect. 5) If 10 minutes a Bluetooth headset paired device is not found, the headset automatically shut down. 4、Instructions for use: 1) Power on / off: Direct dial on (off) or dial down (on) switch button. 2) answer a call: Click on the headset to answer hang up button. 3) Hang up the phone: Press the end key on the headset to answer. 4) make a call: In standby operation, enter the number Press the phone's dial button Enter the number to make calls. 5) to end the call: A, in a call to end the call, press the answer button again to hang up to end the call. B, in a call, press the button again to hang up the phone, end the call.
6) refused to answer: When the phone rings, press and hold the end key on the headset to 1-2 seconds. 7) the volume increase / decrease: press the volume key, click to increase or decrease the volume to maximum or minimum volume,it all have intelligent prompt. 5, lack of electricity: In working condition, Bluetooth headset with intelligent voice prompt "battery low", please charge. 3、specifications 1)Bluetooth version: 4.0 2)Support profile: Headset 、HFP、A2DP、AVRCP 3)Talking Time: About 24 hours 4)Standby Time: About 30 dadys 5)Charging Time: About 3 hours 6)Music Play Time: 22 hours 7)wireless Range: 10m 8)Previous song,next song: Yes 9)Battery Status Display on IOS device: Yes 10)Support Multi—point with 2 device: Yes 11)Voice reporting incoming phone number: Yes 12)Working Temperature: -10°C—60°C
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu