Cosonic Acoustic Technology NS-CAHBTEB01 Bluetooth in-ear Headset User Manual NS CAHBTEB01 15 0047 QSG V1 EN FINAL ai

Cosonic Acoustic Technology Co., Ltd. Bluetooth in-ear Headset NS CAHBTEB01 15 0047 QSG V1 EN FINAL ai

Users Manual

OFF/ONQuick Setup Guide | NS-CAHBTEB01Bluetooth Headset PACKAGE CONTENTS• Bluetooth Headset• USB charging cable• Earbuds (small and large)• Quick Setup GuideFEATURES• High-quality stereo sound from Bluetooth 4.0 enabled devices• Battery lasts 12 hours (talk), 10 hours (music)• Inline controls easily adjust audio• Curved design ts comfortably around the neckBefore using your new product, please read these instructions to prevent any damage.CHARGING YOUR HEADSETA tone sounds (every 60 seconds) and the LED ashes red when your headset battery is low.• Connect the USB charging cable from your headset’s charging port to a USB port.PAIRING YOUR HEADSET Pairing your rst Bluetooth device1 Slide the power switch to ON. The LED blinks red and blue and the headset enters pairing mode.2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your headset.3 Turn on your Bluetooth device, turn on Bluetooth, then set your device to pairing mode. For more information, see the documentation that came with your Bluetooth device.4 On your Bluetooth device, select NS-CAHBTEB01. The LED lights blue and a tone sounds when your headset pairs to your Bluetooth device.Manually pairing your Bluetooth device1 Press and hold  (call) to enter pairing mode. The LED blinks red and blue.2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your headset.3 Turn on your Bluetooth device, turn on Bluetooth, then set your device to pairing mode. For more information, see the documentation that came with your Bluetooth device.4 On your Bluetooth device, select NS-CAHBTEB01. The LED lights blue and a tone sounds when your headset pairs to your Bluetooth device.Pairing two devices1 Pair your headset to your secondary Bluetooth device rst. See "Pairing your rst Bluetooth device" for instructions.2 Press and hold (call) on your Bluetooth headset to enter pairing mode.3 Connect your primary Bluetooth device to your Bluetooth headset. See "Manually pairing your Bluetooth device" for instructions.4 Re-pair your secondary Bluetooth device to your Bluetooth headset. See "Manually pairing your Bluetooth device" for instructions. Note: When connected to two phones, the headset calling functions will work with the primary phone.Disconnecting and reconnecting your paired deviceYour headset remembers up to six Bluetooth devices and will turn o after three minutes if it is not paired to a Bluetooth device.Earbud (L)Earbud (R)Call button/LED indicatorVolume down Volume upCharging portOFF/ONPower switchNeck strap Play/PauseRewind/Skip backFast forward/Skip forwardTo disconnect…Turn o your headsetTo reconnect…Turn on your headset .Your headset searches for the last connectedBluetooth device and reconnects.OFF/ONOMicrophoneFinal at size: 304.8 x 177.8 mm Final fold size: 76.2 x 177.8 mmNS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai 1 3/12/2015 3:27:50 PMNS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai 1 3/12/2015 3:27:50 PMV1FINALFOR PRINT
V1 ENGLISH 15-0047Note: If a device does not automatically reconnect, you may need to reselect “NS-CAHBTEB01” on your Bluetooth device.WEARING YOUR HEADSETUSING YOUR HEADSETMaking phone callsNote: When your headset is connected to two Bluetooth devices, calling functions work with the primary Bluetooth device (the one that is connected second or made the last outgoing call).• To make a call, use your phone’s controls, then select the headset as the audio source.• To redial the last number on your primary phone, press  (call) twice.• To answer an incoming call, press  (call).IssueNo sound or low volumeCannot connect with BluetoothBluetooth device keeps unpairing“NS-CAHBTEB01” does not appear on my Bluetooth deviceNo PowerSolution• Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and “NS-CAHBTEB01” is selected.• Turn up the volume on your headset and Bluetooth device.• Make sure that your Bluetooth device is not muted.• Make sure that your headset and Bluetooth device are not paired to other devices.• Shorten the distance between your headset and Bluetooth device.• Turn your devices o, then on. Re-pair your headset and Bluetooth device.• Make sure that your headset and Bluetooth device are not paired to other devices.• Make sure that your Bluetooth device supports the HSP, SFP, A2DP, or AVRCP Bluetooth protocol.• Make sure that you have selected “NS-CAHBTEB01” on your Bluetooth device.• Shorten the distance between your headset and your Bluetooth device.• Recharge your headset and Bluetooth device's batteries.• Shorten the distance between your headset and Bluetooth device.• Put your headset into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.• Make sure your Bluetooth headset is charged.• Make sure your Bluetooth headset is turned ON.TROUBLESHOOTINGTo disconnect…Move the Bluetooth device out of range Turn o your Bluetooth device Turn o Bluetooth on your Bluetooth deviceConnect your Bluetooth device to anotherBluetooth deviceTo reconnect…Make sure your Bluetooth device is within 33 feet of your headset.Turn on your Bluetooth device, then make sure Bluetooth is on.Turn on Bluetooth on your Bluetooth device.Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select “NS-CAHBTEB01” on your Bluetooth device. Note: Your headset vibrates when there is an incoming call.• To switch audio between your headset and phone, use your phone’s controls.• To reject an incoming call, press and hold  (call) for two seconds.• To end a call, press  (call) twice.Call waiting• To switch to an incoming call, press  (call) twice while speaking on an active call.• To switch between two active calls, press and hold  (call) for one second.• To end both calls, press  (call).Begin playback on your Bluetooth device.• To play audio, press .• To skip to the next track, press .• To skip to the previous track, press .• To fast forward, press and hold .• To rewind, press and hold .SPECIFICATIONS• Average charging time: 1.5 - 2 hours • Operating time: Talk - 12 hours / Music - 10 hours • Working distance: Up to 33 ft. (10 m)• Battery: Lithium 200mAh/3.7VSAFETY INFORMATION/CAUTIONFCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CautionChanges or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent form that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RSS-Gen & RSS-210 statement:This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RSS-102 Statement:This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.ONEYEAR LIMITED WARRANTYVisit www.insigniaproducts.com for details.CONTACT INSIGNIA:1-877-467-4289 (U.S. and Canada)01-800-926-3000 (Mexico)www.insigniaproducts.comINSIGNIA is a trademark of Best Buy and its aliated companies.Registered in some countries.Distributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richeld, MN 55423 U.S.A.©2015 Best Buy. All rights reserved.Made in China NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai 2 3/12/2015 3:27:51 PMNS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai 2 3/12/2015 3:27:51 PM

Navigation menu