Cosonic Acoustic Technology NS-CAHBTEB01 Bluetooth in-ear Headset User Manual NS CAHBTEB01 15 0047 QSG V1 EN FINAL ai

Download:
Mirror Download [FCC.gov]
Document ID	2607726
Application ID	CnqXhIMUC9p9ociC+9aw6A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.11kB (551422 bits)
Date Submitted	2015-05-08 00:00:00
Date Available	2015-05-08 00:00:00
Creation Date	2015-03-12 15:29:30
Producing Software	Acrobat Distiller 10.1.8 (Windows)
Document Lastmod	2015-03-13 10:17:05
Document Title	NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai
Document Creator	Adobe Graphics Manager
Document Author:	Judy Bligh

Final flat size: 304.8 x 177.8 mm
Final fold size: 76.2 x 177.8 mm
V1
NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai 1 3/12/2015 3:27:50 PM
FINAL
FOR PRINT
Quick Setup Guide | NS-CAHBTEB01
Bluetooth Headset
PACKAGE CONTENTS
CHARGING YOUR HEADSET
• Bluetooth Headset
A tone sounds (every 60 seconds) and the LED
flashes red when your headset battery is low.
• Connect the USB charging cable from your
headset’s charging port to a USB port.
• USB charging cable
• Earbuds (small and large)
• Quick Setup Guide
FEATURES
High-quality stereo sound from Bluetooth 4.0 enabled devices
Battery lasts 12 hours (talk), 10 hours (music)
Inline controls easily adjust audio
Curved design fits comfortably around the neck
Rewind/Skip back
OFF/ON
Fast forward/Skip forward
PAIRING YOUR HEADSET
Play/Pause
Pairing your first Bluetooth device
1 Slide the power switch to ON. The LED blinks red
and blue and the headset enters pairing mode.
Charging port
Neck strap
Earbud (R)
Power switch
Microphone
Earbud (L)
OFF/ON
•
•
•
•
Call button/LED indicator
Volume down
Volume up
Before using your new product,
please read these instructions to prevent any damage.
OFF/ON
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
Manually pairing your Bluetooth device
1 Press and hold  (call) to enter pairing mode. The
LED blinks red and blue.
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
Pairing two devices
1 Pair your headset to your secondary Bluetooth
device first. See "Pairing your first Bluetooth
device" for instructions.
2 Press and hold  (call) on your Bluetooth headset
to enter pairing mode.
3 Connect your primary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
4 Re-pair your secondary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
Note: When connected to two phones, the
headset calling functions will work with the
primary phone.
Disconnecting and reconnecting your paired
device
Your headset remembers up to six Bluetooth devices
and will turn off after three minutes if it is not paired
to a Bluetooth device.
To disconnect…
To reconnect…
Turn off your headset
Turn on your headset .Your headset
searches for the last connected
Bluetooth device and reconnects.
NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai 2 3/12/2015 3:27:51 PM
To disconnect…
To reconnect…
Move the Bluetooth
device out of range
Make sure your Bluetooth device is
within 33 feet of your headset.
Turn off your Bluetooth
device
Turn on your Bluetooth device, then
make sure Bluetooth is on.
Turn off Bluetooth on
your Bluetooth device
Turn on Bluetooth on your Bluetooth
device.
Connect your Bluetooth
device to another
Bluetooth device
Disconnect your Bluetooth device
from the other Bluetooth device,
then set your device to pairing
mode. Select “NS-CAHBTEB01” on
your Bluetooth device.
Note: If a device does not automatically reconnect,
you may need to reselect “NS-CAHBTEB01” on your
Bluetooth device.
WEARING YOUR HEADSET
Note: Your headset vibrates when there is an
incoming call.
• To switch audio between your headset and phone,
use your phone’s controls.
• To reject an incoming call, press and hold  (call) for
two seconds.
• To end a call, press  (call) twice.
Call waiting
• To switch to an incoming call, press  (call) twice
while speaking on an active call.
• To switch between two active calls, press and hold 
(call) for one second.
• To end both calls, press  (call).
Begin playback on your Bluetooth device.
• To play audio, press .
• To skip to the next track, press .
• To skip to the previous track, press .
• To fast forward, press and hold .
• To rewind, press and hold .
SPECIFICATIONS
•
•
•
•
Average charging time: 1.5 - 2 hours
Operating time: Talk - 12 hours / Music - 10 hours
Working distance: Up to 33 ft. (10 m)
Battery: Lithium 200mAh/3.7V
SAFETY INFORMATION/CAUTION
USING YOUR HEADSET
Making phone calls
Note: When your headset is connected to two
Bluetooth devices, calling functions work with the
primary Bluetooth device (the one that is connected
second or made the last outgoing call).
• To make a call, use your phone’s controls, then
select the headset as the audio source.
• To redial the last number on your primary phone,
press  (call) twice.
• To answer an incoming call, press  (call).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, maybe cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
TROUBLESHOOTING
Issue
Solution
No sound or low volume
• Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and
“NS-CAHBTEB01” is selected.
• Turn up the volume on your headset and Bluetooth device.
• Make sure that your Bluetooth device is not muted.
• Make sure that your headset and Bluetooth device are not paired to other devices.
Cannot connect with Bluetooth
•
•
•
•
Bluetooth device keeps unpairing
• Shorten the distance between your headset and your Bluetooth device.
• Recharge your headset and Bluetooth device's batteries.
“NS-CAHBTEB01” does not appear on my
Bluetooth device
• Shorten the distance between your headset and Bluetooth device.
• Put your headset into pairing mode, then refresh your list of Bluetooth devices. For
more information, see the documentation that came with your Bluetooth device.
No Power
• Make sure your Bluetooth headset is charged.
• Make sure your Bluetooth headset is turned ON.
Shorten the distance between your headset and Bluetooth device.
Turn your devices off, then on. Re-pair your headset and Bluetooth device.
Make sure that your headset and Bluetooth device are not paired to other devices.
Make sure that your Bluetooth device supports the HSP, SFP, A2DP, or AVRCP Bluetooth
protocol.
• Make sure that you have selected “NS-CAHBTEB01” on your Bluetooth device.
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different form that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
CONTACT INSIGNIA:
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 15-0047

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Judy Bligh
Title                           : NS-CAHBTEB01_15-0047_QSG_V1_EN_FINAL.ai
Create Date                     : 2015:03:12 15:29:30-05:00
Creator Tool                    : Adobe Graphics Manager
Modify Date                     : 2015:03:13 10:17:05+08:00
Metadata Date                   : 2015:03:13 10:17:05+08:00
Producer                        : Acrobat Distiller 10.1.8 (Windows)
Document ID                     : uuid:14021bf0-84db-43ec-b948-5c43f72289a0
Instance ID                     : uuid:35b861c8-fdae-4328-802c-100d6b0a45c0
Page Count                      : 2
Author                          : Judy Bligh

EXIF Metadata provided by EXIF.tools