Cotton On USA 140291 TUMBLE DRONE User Manual

Cotton On USA Inc TUMBLE DRONE

User manual

TUMBLE DRONEINSTRUCTIONSFOR AGES 14+Model:140291
1PAIRING THE DEVICEENGLISH• To charge the lithium battery, plug it into the USB provided and insert USB into a charging port.• Insert the base of the charged lithium battery under the body of the drone and insert the cable into the end of the drone body• Blue & Green lights on the drone will start flashing once the lithium bat-tery is inserted. Have the blue lights facing towards you.• Before you turn on the remote control, ensure the control levers are pushed upwards or directly in the middle of the socket. • Turn on remote control. Once you hear a beeping sound, this means it is ready to pair to the drone• At the same time, hold both control levels directly downwards until flash-ing lights on the drone stop. • If unsuccessful the first time, repeat the process of pushing control le-vers up and then push directly downwards again at the same time.SAFETY GUIDELINESIndividuals flying for hobby or recreation are strongly encouraged to follow safety guidelines, which include:•Fly during the day only and keep your drone within visual line-of-sight•If you are in controlled airspace, which covers most Australian cities, you must not fly higher than 120 metres•You must keep your Drone at least 30 metres (100 feet) away from other people•You must not fly over populous areas where if your drone was to fail, it could hit someone. This could include beaches, parks, or sport ovals where there is a game in progress•Never fly near other aircraft, especially near airports.
2•Remember you must not operate your Drone in a way that creates a hazard to another aircraft, person or property•Fly at or below 400 feet (120m) & stay away from surrounding obstaclesRADIO AND TELEVISION INTERFERENCEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful in-terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To en-sure the correct waste treatment of the product and batteries, please dis-pose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment/batteries. By disposing of batteries and electrical waste correctly, you will help to conserve natural resources and improve standards of environmental protection.
31. Remove safety screw from Battery Pack Cover2. Remove & replace flat batteries. Ensure batteries are inserted with the correct polarity (+ & - )3. Refit cover & safety screwPlease read and keep these instructions for future useNon-rechargeable batteries are not to be rechargedRechargeable batteries are only to be used under adult supervisionRechargeable batteries are to be removed from the product before being chargedDifferent types of batteries or new and used batteries are not to be mixedBatteries are to be inserted with correct polarityExhausted batteries are to be removed from the productThe supply terminals are not to be short circuitedEnsure the battery is in place and covered before starting Tumble DroneDo not overexpose the battery and avoid excessive physical contactIf the battery is leaking, or broken please expose of immediatelyKeep battery away from childrenDo not use any flammable solvents to clean the chargerAvoid storing this product in extreme temperaturesWhen disposing the battery, ensure you dispose of in a special purpose container- adhere to local regulationsTo improve the life of the battery please avoid excessive dischargeIf storing this product for a long period of time (over 1 month) ensure the battery is charged at least 50% to store away. This will help with the maintenance of the product.If the product has not been used for a longer time frame, ensure you check the voltage of the battery as it is to be no less than 3VThe lithium battery is only to be charged with the USB provided.WARNING: Not suitable for children under 3 years of age. Hot surface hazard. This product is not a toy. To clean product, ensure transformer is disconnected (no batteries present) and clean with dry cloth. The toy shall LITHIUM BATTERYBATTERY REPLACEMENT
4SPECIFICATIONSCONTENTSSize: 19*19*4cmGyroscope: 6AXISFrequency: 2.4GHzWeight: 0.029kgCharge Mode: USB (Voltage:3.7V ,Electric Current:≤500mA)Battery Lithium batteryCharging Time: 3 hoursFlight time: 8 minutesDroneUSB Charging CableUser ManualRemote Control 2.4Ghz2 x landing stabilisersLithium batteryonly be charged with the USB charging stick provided. The transformer (USB stick) is not a toy.
5GET TO KNOW YOUR REMOTE CONTROL.Batteries sold seperately.Tumble Key
6HOW TO CONTROL THE AIRCRAFT
7Alignmentyou can correctIf there is flight instability put the aircraft on the ground on a level surface. Ensure the remote control and aircraft are still connected. At the same time, move the control levers in the direction as per diagram and hold for 3 seconds. Once the flashing light stops, this indicates that the aircraft is now back to original stability.it by pushing the buttonupward or downwardiesIf the aircraft falls on the ground during flight time, please do not operate the control level immediately. Wait 5-10 seconds and the gyro willl restore back to the original position automatically.When you are familiar with the basic actiions, you can now attempt tumbling. Once the aircraft is 3 metres high, keep pressing the ‘Tumeble Key’ on the right top corner of the remote control. then push the right control level in any direction to make the drone tumble. An example would be to move the control lever left to make the drone tumble left.3D TUMBLING INSTRUCTION
8This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC Statement

Navigation menu