Coulisse ABC03 Motor for drive a vertical blind by RF remote control User Manual
Coulisse B.V. Motor for drive a vertical blind by RF remote control
Coulisse >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1689949 |
| Application ID | r6rimOntASYDHmQWbrhsZQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 93.1kB (1163722 bits) |
| Date Submitted | 2012-05-04 00:00:00 |
| Date Available | 2012-05-04 00:00:00 |
| Creation Date | 2017-10-31 20:11:53 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-31 20:11:53 |
| Document Title | User Manual |
| Document Creator | Hewlett Packard MFP |
2.4 Reset & initialisation 1.2 Performances User Manual Absolute Control Vertical Motor ABC-03 New motors can be initialized directly without resetting ABC-03 - Reset to factory defaults Powersupply Rated power Nom. translating speed Max. rotating torque Max. pulling force Max. channels to pair Operating temperature 12-24V DC - 3A 36W 1,5mtr/min 680 mNm 3,6 Kg 32 channels 5 - 60°C 1 sec Set in Program mode: Shortly press program button 10 sec Program mode: Blind is stepping... Hold program button for 10 sec. untill blind stops stepping 1.3 Connectors and buttons - Reset to factory defaults & Erase all paired remotes 12-24V DC - 3A input 1 sec Set in Program mode: Shortly press program button 15 sec Program mode: Blind is stepping... Hold program button for 15 sec. untill blind stops stepping and steps once Antenna Program button - Initialisation (only possible after reset) 1. Connect the motorunit with the 12-24V DC - 3A powersupply 2. Detect endpositions: 2. Programming and operating WARNING: WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. 2.1 Programming - Pair to a channel/remote (also possible by using ‘SingleSelect’, see manual Remote control*) 1 sec Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Shortly press program button It is important that the runnertrain first moves outwards. If not, press program button to stop and press it again to change the direction. Blind moves slowly 1 sec. Program mode: Blind is stepping... Set in Program mode: Shortly press program button Choose channel by pressing the ChannelSelect button indoor use only Wait while blind is detecting the endpoints... (this process will take a while and may make some noise) 1. General information When blind is ready the runnertrain must be in. Check if all runners are aligned. If not, repeat step 1 & 2 completely. Blind is now ready for normal use. 1 sec. The ABC-03 is a complete kit to motorize Vertical Absolute systems. The motorunit is always situated on the left side of the system. The motorunit is operated with a Coulisse remote control only. The software in the motorunit is selflearning and detects its endpoints automatically. The motorunit contains a motor with a gearbox. An electronic actuator switches between sliding and rotating the slats. Sliding and rotating is possible at every position. The blinds are automatically rotated in a secure position before sliding. Pair/unpair by pressing the program button on the backside of the remote Exit Program mode: Shortly press program button 3. Tips & Troubleshooting Please check www.coulisse.nl for the latest tips and troubleshooting guide 4. Safety & Cleaning 4.1 Safety 2.2 Operating WARNING: - Control by remote (See manual Remotecontrol) - Manual Control 1.1 General dimensions 34 > 2 sec Press program button for more than 2 sec. 66,0 88,3 Blind rotates as long as button is pressed (max. 15 sec.) Exit or press program button another time for more than 2 sec. and blind moves in opposite direction Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Do not let children play with the blind and/or remote control. Only use powersupplies or batteries that comply with the specifications on the motor. In case of malfunction, unplug the device or remove the batteries and contact your dealer. Take care that the blind can move freely and is not blocked by objects. Take care that the powersupply cable is out of reach for children. Do not paint the device. Keep the device dry. 4.2 Cleaning 233,5 2.3 Additional blind settings Follow these general rules when cleaning the outside of the device and its components: Additional blind settings: Available Switch rotation direction Favorite position BatteryMode Yes Yes Yes - Make sure the device is unplugged. - Use a damp, soft, lint-free cloth. Avoid getting moisture in openings. - Don’t use aerosol sprays, solvents, alcohol, or abrasives. 5. Service & Support We refer to the manual of the Coulisse Remote control to set the additional blind settings. WARNING: Disclaimer: © Copyright Coulisse Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Online Resources For the latest information and updated manuals go to www.coulisse.nl. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. to mistakes and/or faults in this manual. Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify Obtaining Warranty Service First follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. any person or entity of such revisions or changes. The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person. We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl. Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands ABC-03-U_R0_ GB1 Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due FCC Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: ZY4ABC03 Regulatory information 1 FCC Information to User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modiications will invalidate all applicable regulatory certiications and approvals. RASDF 2 FCC Guidelines for Human Exposure Warning: In order to comply with RF exposure limits, the user is advised to maintain a distance of at least 20 cm from the antenna structure of this device while it is in use. 3 FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. 4 FCC Radio Frequency Interference statement 12.9.2011 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at his own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Create Date : 0000:01:01 00:00:00 Creation Date--Text : Modify Date : 2012:05:03 16:34:41+08:00 Subject : Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Format : application/pdf Description : Creator : Title : Creator Tool : Hewlett Packard MFP Metadata Date : 2012:05:03 16:34:41+08:00 Document ID : uuid:e11681de-4da5-49d1-9188-423e9363f916 Instance ID : uuid:d2b63817-c960-4597-b7eb-ef06d73799dd Page Count : 2EXIF Metadata provided by EXIF.tools