User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2810166 |
| Application ID | Wh1p0ughOIPFV1PdHV8h2Q== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.3kB (291216 bits) |
| Date Submitted | 2015-11-12 00:00:00 |
| Date Available | 2015-11-12 00:00:00 |
| Creation Date | 2015-11-04 08:55:51 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-11-04 08:55:51 |
| Document Title | User Manual.pdf |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
| Document Author: | Lai hong tao |
2. Programming Manual Absolute Control Remote control ABC-26 4. Remote Holder 1. Programming a blind Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material. Exit Program mode: Press program button on the blind, The blind stops stepping. Set in Program mode: Press program button on the motor, The blind starts stepping. Pair/unpair by pressing the program button (use pen) Action confirmed: blind stops stepping for 3 seconds Pairing a blind to the remote that is already paired with the blind, will delete the pairing. PICO-WBX-ADAPT Claro wallplate Claro wallplate 2. Set the favorite position To program a blind, the blind must be in program mode. (Press program button on the motor, when blind is not stepping.) WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. WARNING: Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Action confirmed: blind stops stepping for 3 seconds Set the blind in the desired position. 5. Tips & Troubleshooting Save your position by pressing the center button for two seconds. Please check www.coulisse.nl for the latest tips and troubleshooting guide. indoor use only 6. Safety & Cleaning 3. Switch the blind’s direction of rotation To program a blind, the blind must be in program mode. (Press program button on the motor, when blind is not stepping.) Example: when you press up on the remote and your blind moves down, you have to switch the rotation direction of the blind. 1. General information 6.1 Safety WARNING: The ABC-26 the wall switch to operate Coulisse automation blinds. Switch UP & DOWN Switch LEFT & RIGHT 1.1 Performances ABC-26 Battery Action confirmed: blind stops stepping for 3 seconds CR2430 3.0V Channels Max. blinds remote infinite Range (inside building) 2.4 GHz Weight Hold the up and down button to switch the direction of rotation 40 grams 1.2 Buttons Indicator Left Hold the left and right button to switch the direction of rotation. - Make sure the device is unplugged. - Use a damp, soft, lint-free cloth. Avoid getting moisture in openings. - Don’t use aerosol sprays, solvents, alcohol, or abrasives. 3. Operating 7. Service & Support Operate a blind Up - Do not let children play with the blind and/or remote control - Do not paint the device - Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing the battery. - Do not drop, knock, or shake the device. Rough handling can break internal circuit boards. 6.2 Cleaning Follow these general rules when cleaning the outside of the device and its components: 20m, 2 concrete walls Frequency Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. WARNING: Center button (stop - favorite) Program button Right Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Online Resources For the latest information and updated manuals go to www.coulisse.nl. Down Obtaining Warranty Service First follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. 1.3 Changing the battery Disclaimer: CR2430 3V Up / tilt Down / tilt Stop 2 sec: Favorite position Left * Right * © Copyright Coulisse * vertical motor only All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher. Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual. Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes. &OLFN The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person . We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl. ABC-26_R0_GB0 Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ǂ Reorient or relocate the receiving antenna. ǂ Increase the separation between the equipment and receiver. ǂ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ǂ Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Lai hong tao Create Date : 2015:11:04 08:55:51+08:00 Modify Date : 2015:11:04 08:55:51+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Instance ID : uuid:0706b0e3-27c2-43be-901e-2bad947dddba Original Document ID : adobe:docid:indd:793fc7a3-43b2-11de-bad3-cc9b2b2301ad Document ID : xmp.id:0c9efcaa-ccbf-564f-b327-a126da4902ac Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7a047579-bf4f-8749-9fef-b732adbe522a Derived From Document ID : xmp.did:6ef0114d-46a4-3f47-bad7-fe9df7ddc3b3 Derived From Original Document ID: adobe:docid:indd:793fc7a3-43b2-11de-bad3-cc9b2b2301ad Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2015:10:02 16:20:07+02:00 Metadata Date : 2015:11:04 08:55:36+08:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Format : application/pdf Title : User Manual.pdf Creator : Lai hong tao Producer : Acrobat Distiller 9.0.0 (Windows) Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools