Country Mate Technology CAHBTEP01 Bluetooth Earpods User Manual NS CAHBTEP01 QSG ai

Download:
Mirror Download [FCC.gov]
Document ID	2934594
Application ID	bZYHdlnkZHhKOH+vLOfDLg==
Document Description	Users Manual - 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	81.6kB (1020026 bits)
Date Submitted	2016-03-18 00:00:00
Date Available	2016-03-18 00:00:00
Creation Date	2016-01-05 08:27:22
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-01-05 08:27:22
Document Title	NS-CAHBTEP01_QSG.ai
Document Creator	PScript5.dll Version 5.2
Document Author:	gao

NS-CAHBTEP01_15-1223_QSG_V0_EN.ai 12/23/2015 15:54:25PM
BT basic indication
Bluetooth Function Indication
Item
Operation
Power on
Long press 2 MFB more than 2s Blue LED on 1.5s
LED Indication
Power off
Long press 2 MFB more than 3s Red LED on 1.5s
"power off"
Pairing
mode
Long press 2 MFB more than 4s Blue and red LED
on power off stage
blinking alternant
2 short beeps tone
Play/Pause Short press 2 MFB button
RIGHT
BACK
NS-CAHBTEP01
Bluetooth Earpods
2 high beeps tone
for max volume
2 low beeps tone
for min volume
LEFT
Volume Up
Short press 1 + / 4 - button
/Down
Next Track/
Previous
Long press 1 +/ 4 - button
Track
Incoming
call
Blue LED blinking 3
times until pick up
Tone
"power on"
Some ring tone
Answer call Short press 2 MFB when have
a calling
1 short beeps tone
Reject call
Long press 2 MFB when have
a calling
1 long beeps tone
Redial
Double press 2 MFB
2 short beeps tone
Reset
device list
Long press 2 MFB button more All LED off then
than 10s in power off stage
power off
Charging Indication
Bluetooth Earpods
1 Volume Up
Next Track
USB charging cable
Quick Setup Guide
MFB
(Power/talk/Play/
Pause/pairing)
button
3 Indicator led
Press + to increase the volume.
Press + to Skip to Next Track.
Charging
Connected USB cable
Red LED on
Full charging
Red LED off
Blue LED blinking fast
3 times at every 1min
"battery low" at
every 1 min
Low battery
Press to turn on your stereo headphones.
If you receive a phone call, press to talk. Press
to turm off your stereo headphones .
Shows current status of the headphones.
4 Volume Down
Previous Track
Press - to decrease the volume.
Press - to Previous Track.
5 Cable clamp
The Cable clamp on the collar.
6 Micro USB port
Plug the micro USB connector into this port
to charge your headphones.
7 Microphone
Allows you to talk on the telephone.
Method of use
1. Place Headphone on the neck, insure the same of length of both sides.
2. Place clip on collar which could be keep the Headphone wouldn’t be
drop.
3. Wear the earpods, at that time the controller will nature hang front of
right shoulder.
Connect the charging cable to
your stereo headphones
6 Micro USB port, then plug
the USB connector into your
desktop computer, notebook
or Smartphone AC adapter.
The red LED stays on while
your stereo headphones are
charging and turns off when
they are fully charged.
Press and hold the 2 MFB
button for two/three
seconds . The LED blinks
blue (when turned on) or
red (when turned off), and
the voice prompt says
“Power on”, or “Power off.”
NS-CAHBTEP01_15-1223_QSG_V0_EN.ai 12/23/2015 15:54:25PM
Refer to the computer’s
FCC Statement:
Prompts you by saying “Device
Connected,” when connected.
With your stereo
headphones turned off,
press and hold 2 MFB for
four seconds. The blue
and red led blinking
alternant.
On your phone or MP3
player, select INSIGNIA
NS-CAHBTEP01 from
the list of discovered
devices, then enter the
password 0000(four zeros)
(if required) to pair your
headphones.
INSIGNIA NS-CAHBTEP01
Hands-Free Unit icon or
the INSIGNIA
NS-CAHBTEP01 Stereo
Audio icon.
With the headphones
turned off, press and hold
2 MFB for four seconds.
The LED blinks blue and red
led alternant, then pairing
mode is activated.
Double-click the INSIGNIA
NS-CAHBTEP01 icon on
the computer or
highlight the icon, then
click Next.
Note: If you are unable to
locate the INSIGNIA
NS-CAHBTEP01 icon, click
the Search Again button.
turned off, press and hold
2 MFB for four seconds.
The LED blinks blue and
red led alternant, then
pairing mode is activated.
Select INSIGNIA
NS-CAHBTEP01, then click
Continue. The computer
gathers information.
Under Input, select
INSIGNIA NS-CAHBTEP01,
then under Output, select
INSIGNIA NS-CAHBTEP01.
To reset your headphones,
With your stereo
headphones turned off,
press and hold 2 MFB for
10 seconds.
Bluetooth version:
Bluetooth 4.1+EDR
Supported profiles:
A2DP, AVRCP, HFP, HSP
Frequency spectrum:
2.4 ~ 2.4835 GHz ISM Band
Working distance:
Up to 33 ft. (10 m)
Operating temperature:
23 ~ 122° F (-5 ~ 50° C)
Operating time:
Talk: 6 hours;
music: 6 hours, playback
music track
Standby time:
200Hours
Size:
Ear shell：
0.67 x 0.68 x 1.26 inches
(1.7 x 1.72 x 3.2 cm)
Mic controller：
2.2 x 0.41 x 0.31 inches
(5.6 x 1.05 x 0.8 cm)
Overall length：
31.5 inches (80 cm)
Weight:0.423 oz(12g)
Average charging time:
2Hours
FCC ID:MV3-CAHBTEP01
FCC statement:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an
experienced radio/TV technician for
help."
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) this device may
not cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation."
(Or in manual if product too
small)
FCC Caution:
Changes or modifications not
expressly approved by the part
responsible for compliance
could void the user's authority
to operate the equipment.
Made in China
V0 ENGLISH 15-1223

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2016:01:05 08:27:22+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2016:01:05 08:27:22+08:00
Format                          : application/pdf
Creator                         : gao
Title                           : NS-CAHBTEP01_QSG.ai
Document ID                     : uuid:edba35c7-f05e-4fc3-9d72-c64d26ba5b76
Instance ID                     : uuid:67cd921b-5915-4771-99e9-a6e724afb415
Page Count                      : 2
Author                          : gao

EXIF Metadata provided by EXIF.tools