CoupDEN CP370 Personal Computer User Manual Part 3

CoupDEN Co.,Ltd. Personal Computer Users Manual Part 3

Contents

Users Manual Part 3

AssemblyFront panelCD-doorFront panel holderDAF Chassis5.253.5UMZUJFPSU lines holderTop chassis expension moduleTop cover (plastic)Side panel (L)Side panel (R)140mm cooling fan (air from outside to inside)120mm cooling fan (air from inside to outside)80mm cooling fan (air from inside to outside)120mm cooling fan (air from inside to outside)120mm cooling fan (air from outside to inside) - CPU120mm cooling fan (air from outside to inside) - Graphic Card
CPU Intel® Pentium D830 3.0GHzSystem memory512MB or aboveHard Disk Drive160GB or above (Serial ATA type)CD-ROM Drive- CD-ROM : Sony CDU5221 (52x reading, E-IDE type)- CD-RW/DVD Drive : Toshiba Samsung Storage TS-H492 (52x32x52 CD-RW, 16x DVD-ROM Combo.Serial connector- On-Board (9pin male, 1ea)Parallel connector - On-Board (25pin female, 1ea)Keyboard connector- On-Board (6pin PS/2 type, 1ea)Mouse connector- On-Board (6pin PS/2 type 1ea)Sound connector - Line-In, Line-Out, Mic-In, RS Out, CS Out, SPDIF Out-Optical and Coaxial Audio portFront-End connector- On-Sub Board in front bezel (Mic jack, Earphone jack and USB connector 2ea- 1394 connector, 1ea (option for buyer)USB connector- On-Board (4ea), Front-End (2ea)VGA Card - GeForce 6600 128MB for dual display(Analog+DVI-I) and TV outExpansion slot- PCI-16x slot 1ea, PCI-1x slot 2ea and PCI slot 3eaCase spec.- Dimension : 180mm(W) x 410mm(H) x 450mm(D)- Bay : 1) 3.5 inch x 7ea(hidden 6 bays included) 2) 5.25 inch x 4ea - Weight : 5.5Kg (net), 6.5Kg(gross) with packing partsCooling Solution- 120mm x 2ea for CP303 (fixed 1500rpm)- 120mm x 2ea for CP350, 370 (from 900~1600rpm) with Fan controller and 120mm Fan (fixed 1500rpm)Cable -Power cable : 1.8mPower Supply Unit (Seventeam BLP-300BLP) - 300W Maximum - AC Input Voltage : 115~230VAC,- AC Input Frequency : 50 ~ 60HzEnvironmental conditions- Operating Temperature : 5°C~35°C , Storage Temperature : -20°C~ 55°C- Operating Humidity :30% ~80%(RH) , Storage Humidity : 30% ~80%(RH)System Specification01_ 11_12_13_14_15_16_17_18_02_03_04_05_06_07_08_09_10_
FCC Compliance Statement Caution : Any changes or modifications in construction of this device, which are not expressly approved by the party responsible for compliance, could void the user’s authority to operate the equipment. Note : This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

Navigation menu