Craftsman 113177620 User Manual WET/DRY VAC Manuals And Guides L0309045

CRAFTSMAN Wet/Dry Vacuum Manual L0309045 CRAFTSMAN Wet/Dry Vacuum Owner's Manual, CRAFTSMAN Wet/Dry Vacuum installation guides

User Manual: Craftsman 113177620 113177620 CRAFTSMAN WET/DRY VAC - Manuals and Guides View the owners manual for your CRAFTSMAN WET/DRY VAC #113177620. Home:Vacuums & Floor Care Parts:Craftsman Parts:Craftsman WET/DRY VAC Manual

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

.SP6503

Gallon

4/8/03

9:29

P_l

Save This Manual
For Future Reference

owner's
manual

MODEL

NO.

113.17762(]

CRRFTSMRN®

Serial
Number
Model and serial
numbers may be
found on the handle.
You should record
both model and serial
numbers in a safe
)lace for future use,

FOR YOUR
SAFETY

20 GALLON
WET/DRY VAC
• assembly
• operating
• repair parts

READ ALL
INSTRUCTIONS
CAREFULLY
J
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Part No, SP6503

Printed in U,S.A,

.SP6503

Gallon

4/8/03

9:29

P_2

FULL ONE YEAR WARRANTY
ON CRAFTSMAN
WET/DRY VACS
If within one year from the date of purchase, this Craftsman Wet/Dry Vac
fails due to a defect in material or workmanship, Sears will repair it, free
of charge.
If this Craftsman Wet/Dry Vac is used for commercial or rental purposes,
this warranty coverage applies for only 90 days from date of purchase.
Warranty Service Is Available By Simply Contacting The Nearest Sears
Service Center/Department Throughout The United States.
This warranty applies only while this product is used in the United States.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Roebuck and Co., D817 WA,

, IL. 60179

IMPORTANT SAFETY INSTRUCTIONS
Safety is a combination of common sense,
staying alert and knowing how your vac
works. Read this manual to understand
the vac.

Safety

Signal

cleaners, oil- based paints, natural gas,
hydrogen, coal dust, magnesium dust,
grain dust, or gun powder.
• Do not use Wet/Dry Vac as a sprayer.

Words

Do not vacuum anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes.

DANGER: means if the safety information
is not followed someone will be seriously
injured or killed.

Do not vacuum fireplace soot or ash. This
is a very fine dust which will not be
captured by the filter and may cause
damage.
To reduce the risk of health hazards from

WARNING:
means
if
the
safety
information
is not followed
someone
could be seriously injured or killed.
CAUTION: means if the safety information
is not followed someone may be injured.
When using
basic safety
following.

vapors or dusts,
materials.

your Wet/Dry Vac, follow
precautions
including the

WARNING.

Toreduce

Do not use
materials.

do not vacuum

or store

near

toxic

hazardous

To reduce the risk of electric shock, do not
expose to rain. Store indoors.

the

risk of fire, electric shock, or injury:
Read and understand this owner's manual
and all labels on the Wet/Dry Vac before
operating. Use only as described in this
manual. To reduce the risk of personal
injury or damage to Wet/Dry Vac, use only
Sears
Craftsman
recommended
accessories.

Do not allow Wet/Dry Vac to be used as a
toy. Close attention is necessary when
used by or near children.
Do not use this Wet/Dry Vac with a torn
filter or without the filter installed except
when vacuuming liquids as described in
the operation section of this manual.
Do not leave Wet/Dry Vac when plugged
in. Unplug from outlet when not in use and
before servicing. Turn off Wet/Dry Vac
before unplugging.

Sparks
inside the motor can ignite
flammable vapors or dust. To reduce the
risk of fire or explosion:
• Do not vacuum, or use this Wet/Dry
Vac, near flammable or combustible
liquids, gases, or explosive dusts, such
as gasoline or other fuels, lighter fluid,

WARNING:To_duce
or electric shock,
una_ended.
2

the risk offire
do not run vac

.SP6503

Gallon

4/8/03

To reduce

the risk of injury

starting,

unplug

changing
Do

unplug

unplug,
Do

grasp

not

other
working
has

P_3

cord

before

filter.

pulling

cord.

damaged

If your

cord,

Wet/Dry

as it should,
been

has

dropped,

plug

Vac

Do not pull or carry
close

missing

parts,

damaged,

around

sharp

by cord,

left

not

openings.
ventilation

put

plug

any
Do

Keep

or the

object
not

openings

dust, lint, hair or anything
air flow.
Keep

hair, loose

parts

moving

body

clothing,
away

into

blocked;

from

Do not run
cord

away

Wet/Dry

vacuum

or pull cord

edges or corners.

Do not handle
with wet hands.

it to

use cord

a door on cord,

Wet/Dry
Vac over cord.
from heated surfaces.

is not

outdoors, or dropped into water, return
a Sears Service Center.

handle,

the plug, not the cord.

use with
parts.

from accidental

power

or cleaning

not

9:29

Vac

ventilation
with

that may reduce

openings

and

This Wet/Dry Vac is double-insulated,
eliminating
the need for a separate
grounding
system. Use only identical
replacement parts. Read the instructions
for Servicing Double-insulated
Wet/Dry
Vacs before servicing.
Observe the following
warnings
that
appear on the motor housing of your
Wet/Dry Vac.
DOUBLE INSULATED -GROUND NOT REQUIRED
WHEN SERVICING USE ONLY
IDENTICAL REPLACEMENT PARTS
WARNING:
To reduce the risk of
electric shock * do not expose to rain
- store indoors.

any

keep free of

fingers,

To reduce the risk of falls, use extra care
when cleaning on stairs.

all
and

parts.

WARNING: For your own safety, read
and understand owner's manual. Do
not pick up hot ashes, coals, toxic,
flammable
or other
hazardous
materials.
Do not use
around
explosive liquids or vapors.

SAVE THESE INSTRUCTIONS
The operation of any utility vac or blower
can result in foreign objects being blown
into the eyes, which can result in severe
eye damage. Always wear safety goggles
complying with ANSI Z87.1 (or in Canada
CSA Z94.3-99)
shown on package.
Everyday eyeglasses have only impact
resistant lenses. They are not safety
glasses. Safety Goggles are available at
Sears retail stores. Glasses or goggles not
in compliance with ANSI or CSA could
seriously hurt you when they break.
WEARYOUR

To reduce the risk of hearing damage,
wear ear protectors when using the vac for
extended hours or when using it in a noisy
area.
For dusty operations, wear dust mask.
Use only extension cords that are rated for
outdoor use. Extension cords in poor
condition or that are too small in wire size
can pose fire and shock hazards. When
using an extension cord, be sure it is in
good condition. Using any extension cord
will cause some loss of power. To keep the
loss to a minimum, use the following table
to choose
the minimum
wire size
extension cord.
Extension Cord Length _ Gauge A.W.G.
0-50 Ft.
|
14
50-100 Ft.
|
12

.SP6503

Gallon

4/8/03

9:29

P_4

Introduction
Owner's

This Wet/Dry Vac is intended for household use only,
IMPORTANT
Please

NOTE

Read

Carefully

Static Shocks Are Common - In dry
areas or when the relative humidity of the
air is low, To reduce the frequency of static
shocks in your home the best remedy is to
add moisture to the air with a console
humidifier.

Unpacking

and Checking

Remove entire contents of carton. Check
each item against the Carton Contents
List, Notify your Sears Store immediately if

Key

Contents

Description

............

Qty.

Vac Assembly .............
Pos-I-Lock Hose Assembly
Utility Nozzle ..............
Wet Nozzle ...............
Car Nozzle ...............
Crevice Tool ..............
Filter Nut .................
Filter Plate ................

J*
K*
L*
M

Filter (Red Stripe) ..........
Filter Cage ...............
Float ....................
Extension Wands ...........

N
P
Q

Caster Foot For Storage
Caster ...................
Diffuser ..................

1
., ,1
1
1
1
1
1
1

R
S

Disposable Filter Bag ........
Owners Manual ............

1
1
1
2
.....

Page
2
2
4
4
5
8
10
12

Carton Contents
_G

List

A
B
C
D
E
F
G*
H*

Contents

any parts are damaged or missing,

Carton

Manual

Item
Warranty Information ..............
Safety Instructions ................
Introduction
.....................
Unpacking and Checking
Carton Contents ...............
Assembly .......................
Operation .......................
Maintenance
...................
Repair Parts ....................

4
4
1
1
1

* These items may come preassembled,
If they are not present in the carton check
the vac power head to see if they are
preassembled.

.SP6503

Gallon

4/8/03

Replacement

9:29

P_5

Filter Assembly

WARNING:
For your own safety,
never connect plug to power source
outlet until all assembly steps are
complete and you have read and
understood the safety and operation
instructions. Do not operate vac with
any parts damaged or missing.

WARNING: To avoid personal injury
or damage to vac be sure to keep
hands, fingers, or any other foreign
objects out of the center opening
when assembling the float.
NOTE: If filter cage needs to be removed,
or replaced, use a flat blade screwdriver
and insert the blade near one of the tabs

1.Carefully slide the filter over the filter
cage, sliding it over the center ring
covering the 3 slots until the filter stops
against the lid.

between the filter cage and the center ring
of the lid. Pry the tab out of the slot. Tilt the
cage and lift away from the lid. Replace in
the following manor:

2. Place the hole in the filter plate over
threaded stud of the filter cage.

5. Place the float over the opening in the
center of the lid with the words "This

3. Gently push on the filter plate to seat the
rubber ring of the filter inside the circular
channel of the filter plate.

Side Towards Lid" laying face down over
the hole.

4. Place filter nut onto threaded stud and
tighten it down. Finger tighten only.

6. Line up filter cage tabs with slots in the
center ring of the lid.

NOTE: Lever of filter nut should be away
from plate as shown.

7. Push on the filter cage until the tabs
snap into slots for a secure fit.

IMPORTANT: Do not overtighten as this
may deform or crack the filter plate, filter
cage, or filter.

Filter Cage _._

NOTE: Your filter has a red stripe that
matches an in-store displayer. When you
visit your local Sears store, just remember
the color of your stripe for the correct
size filter.

Filter Nut_
Lever

Power
Assembly
f

Solid

_
Filter Nut
" "_ Filter Plate
Filter

Slots (3)

Red Stripe
_

Threaded Stud
_:ilter

Cage

ots (3)

Tabs (3)

Slots (3)

.SP6503

Gallon

4/8/03

Caster/Caster

9:29

P_6

Foot Assembly

1. Remove the power assembly
dust drum and set aside.

from the

2. Turn the dust drum upside down on the
floor.
3. Insert the caster feet into the bottom of
drum, as shown (4 places).
4. Push on the caster foot until the foot is
flush with bottom of the dust drum.

r Ball

5. Insert the caster stem into the socket of
the caster foot, as shown (4 places).

Foot

6. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will hear the ball snap
into the socket and the caster will swivel
easily when positioning is correct.
7. Turn the drum upright.

Drum

Vac Assembly
1, Line up front (label and switch side) of
power assembly with drain cap and vac
port located on the front of the drum.

4. Upon releasing flexible latches, the
power assembly will attach to the drum.
5. To remove the power assembly, lift up
on the flexible latches and remove from
drum.

Note: Power assembly must be aligned
with drum for proper attachment.
2. Place power assembly on top of drum.
3. Be sure power assembly completely
covers the top of the drum so leakage
does not occun

Power
Assembly

_Vacuum
Po_
Flexible
Latch

Drain

.SP6503

Gallon

4/8/03

Vac Assembly

9:29

P_7

(continued)

Cord Wrap
Release P_ess

The wet/dry vac has a convenient cord
wrap area designed on the rear of the vac,
Simply, wrap the power cord around the
push/pun handle and cord wrap, then snap
the connector on the plug to a wrap of the
cord, The cord is now wrapped for storage,

Push/PullHandle
\

Po[t

On-Off
Switch
Vaccum
/ Port

Pull
Handle
\ Cord
Wrap

Insert

Hose

Release
Button
Swivel
End

Drum

Handle

Insert the hose locking end of the "Pos-ILock" hose into the inlet of the vac. The
hose should snap into place, To remove
the hose from the vac, press the release
button in the hose assembly and pull the
hose out of the vac inlet, as shown,

Accessory

Drum
Drain/

Utility Nozzle

and Hose Storage

Your accessories may be stored in the
caster feet or in the storage locations on
the lid, The hose may be stored by

wrapping it around the unit and plugging
he open end into one of the storage
locations on the caster feet,
/

Hose
Power

Assembly

Location
Open End
Of Hose
Push Button
End Of Hose

.SP6503

Gallon

4/8/03

9:29

P_8

Operation
WARNING
To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to; lighter fluid, solvent type cleaners, oilbase paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to; coal, magnesium, grain or gun powder. Do not vacuum
explosive dust, flammable or combustible liquids or hot ashes. Do not use this
vac as a sprayer. To reduce the risk of health hazards from vapors or dusts, do
not vacuum toxic materials.
NOTE: A dry filter is necessary to pick up
dry material, if you use your vac to pick up
dust when the filter is wet, the filter will
clog quickly and be very difficult to clean.

CAUTION: To reduce risk of hearing
damage, wear ear protectors when
using the vac for extended hours or
when using it in a noisy area. The
operation of any utility vac can result
in foreign objects being blown into
the eyes, which can result in severe
eye damage. Always wear safety
goggles complying with ANSI Z87.1
(or in Canada, CSA A94.3-99) shown
on Package
before commencing
operation.
Safety
Goggles
are
available at many local retail stores.

3. If your filter is wet but you need to use
the vac to pick up dry material, you can
quickly dry the filter by running the vac
without
hose
attached
for about
10 minutes. The clean air rushing
through the vac will help dry the filter.
The optional Craftsman
HEPA Rated
Material Filter, stock number 9-17912 will
do a better job stopping the very fine
particles than the 9-17816 filter.

To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. if the plug
does not fit fully in the outlet, reverse the
plug. if it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any way.

Vacuuming

2. When picking up large amounts of liquid
we recommend
that the filter be
removed. If the filter is not removed, it
will become saturated and misting may
appear in the exhaust.

After you plug the power cord into the outlet,
turn the unit on by pushing the switch from
position "0" to position 'T'. The symbols
used on the switch actuator are international
"On & Off" symbols. "0" is the symbol for
"OFF" and 'T' is the symbol for "ON".

0
Vacuuming

3. After using the vac to pick up liquids, the
filter must be dried to reduce the risk of
possible mildew and damage to the filter.
4. When the liquid in the drum reaches a
predetermined level, the float mechanism
will rise automatically to cut off air-flow.
When this happens, turn off the vac,
unplug the power cord, and empty the
drum. You will know that the float has
risen because vac airflow ceases and the
motor noise will become higher in pitch,
due to increased motor speed,
IMPORTANT:
To reduce the risk of

I =ON
Dry Materials

1.The filter must always be in correct
position to reduce the risk of leaks and
possible damage to vac.
2. When using your vac to pick up very fine
dust, it will be necessary for you to
empty the drum and clean the filter at
more frequent intervals to maintain peak
vac performance.

Liquids

1. When picking up small amounts of liquid
the filter may be left in place.

damage to the vac do not run motor with
float in raised position,

.SP6503

Gallon

4/8/03

Operation
Emptying

9:29

P_9

(continued)

the Drum

WARNING:
To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.

WARNING:
To reduce the risk of
injury
from
accidental
starting,
unplug power cord before emptying
the drum.

1. Locate blowing port of your vac.
2. Insert the locking end of the "Pos-ILock" hose into the blowing port of the
vac. The hose should snap into place.
To remove the hose from the vac, press
the release button in the hose assembly
and pull the hose out of the vac inlet.

1.The vac comes equipped with a drain
for easy emptying of liquids. Simply
unscrew the drain cap and lift the
opposite side slightly to empty the drum.
2. Another option is to remove the power
assembly.

3. (Optional) Attach extension wand to
opposite end of hose, then place the car
nozzle on the wand.

3. Lay power assembly aside on a clean
area while emptying drum.

4. Turn vac on and you are ready to use
your vac as a blower.
Sears recommended
accessories
are
available at Sears retail stores. The Sears
Blower Nozzle Stock No. 9-16933 is
recommended for blowing debris.

4. Dump the drum contents into the proper
waste disposal container.
WARNING:
To reduce the risk of
back injury or falls, do not lift a vac
heavy with liquid or debris. Scoop or
drain enough contents out to make
the
vac
light
enough
to
lift

Push/Pull Handle
\

comfortably.

Moving

the

Vac

Should it become necessary to pick the
vac up to move it, the handle on the sides
of the dust drum are used to lift. To
maneuver the vac, the push/pull handle in
the rear of the unit should be used.

Blowing Feature
Your vac features a blowing port, It can
blow sawdust and other debris, Follow the
steps below to use your vac as a blower,
WARNING:
Always
wear
safety
goggles complying with ANSI Z87.1
(or in Canada, CSA Z94.3_99) before
us ng as a b ower.

Car Nozzle Wand (Optional)
(Optional)

.SP6503

Gallon

4/8/03

9:29

Maintenance
IMPORTANT:
To reduce the risk of
damage to the blower wheel and motor,
always reinstall the filter before using the
vac for dry material pickup.

Filter
WARNING:
To reduce the risk of
injury
from
accidental
starting,
unplug power cord before changing

Dry Filter

or cleaning filter.

Some removal of dry debris can be
accomplishedwithout removing the filterfrom
the vac. Slap your hand on top of the power
assembly while the vac is turned off.

NOTE: This filter is made of high quality
paper designed
to stop very small
particles of dust. The filter can be used for
wet or dry pick up. Handle the filter
carefully
when removing
to clean or
installing it. Creases in the filter pleats may
occur from installation but creases will not
affect the performance of the filter.

For best
cleaning
results
due
to
accumulated dust, clean the filter in an
open area. Cleaning SHOULD be done
outdoors and not in the living quarters.
After filter removal from vac, remove the
dry debris by gently tapping the filter
against the inside wall of your dust drum.
The debris will loosen and fall.

Cleaning
Your filter should

be cleaned

often

maintain peak vac performance.

For thorough cleaning of dry filter with fine
dust (no debris), run water through it as
described under "Wet Filter".

Be sure to dry the filter before storing or
picking up dry debris.
IMPORTANT: After cleaning, check the
filter for tears or small holes. Do not use a
filter with holes or tears in it. Even a small
hole can cause a lot of dust to come out of

Wet Filter
After filter is removed, run water through the
filter from a hose or spigot. Take care that
water pressure from the hose is not strong
enough to damage filter. Remember: To dry
a filter quickly, reinstall the filter on the vac
and allow the unit to run for approximately
10 minutes. The clean air rushing through
the filter will dry it.

your vac. Replace it immediately.
Removal
To remove the filter for cleaning
or
replacement, unscrew the filter nut from
the filter cage, remove filter plate and lift
off filter.

Installation
WARNING: Do not remove the filter
cage. It is there to help prevent your
fingers from getting into the blower
whee.

Wet/Dry

Refer to "Filter Assembly"
manual.

Section of this

Allow the filter to dry before storing the
vac,

Vac

To keep your Wet/Dry Vac looking its best,
clean the outside with a cloth dampened
with warm water and mild soap.

WARNING:
To
assure
product
SAFETY and RELIABILITY, repairs
and adjustment should be performed
by Sears Service Centers, always
using Sears replacement parts.

To clean the drum:
1. Dump debris out.
2. Wash drum thoroughly with warm water
and mild soap.
3. Wipe out with dry cloth,

NOTE: if your casters are noisy, you may
put a drop of oil on the roller shaft to make
them quieter.
10

.SP6503

Gallon

4/8/03

Maintenance

9:29

(continued)

Wet Nozzle

with the pins fitting through the matching
holes in the squeegee. (Make sure the new
working edge is located farthest from you.)

To pick up liquids off a smooth surface,
use the 2-1/2" wet nozzle accessory
supplied with your wet/dry vac. To use this
nozzle, simply attach the nozzle to the end
of an extension wand.
Connect a second extension wand to the
first, and connect the 2-1/2" x 7' hose to
the extension wand.

2. Using both hands, lower the nozzle body
onto the insert and squeegee with the
round opening of the nozzle closest to you.
With fingers on the far side and thumbs
holding the latches of the removable
insert, flip the nozzle over so the latches
are on the top and the round inlet opening
is facing away from you. Make sure the
squeegee stays on the insert pins.

Liquids may be picked up by dragging the
nozzle across the surface. The squeegee
will dry the surface as you vacuum.
Replacement
rubber for the squeegee
nozzle may be obtained through Sears
Parts. If the rubber becomes worn, it may
be flipped over for use on the opposite
side or replaced. (Replacement service
part #822256). To reverse or replace the
squeegee:
1. Lay the wet nozzle on a flat surface with
the round inlet opening facing up and
the two latches close to you as shown.

3. Press down with each thumb below the
latching tabs until you see and hear the
removable insert snap into the nozzle
body. Snap the latches over the locking
tabs into their original position.

4. Inspect the pins of the insert to make
sure they fit through the holes of the
squeegee and fit into the matching slots
in the nozzle body.
NOTE: If the pins are out of position, hold
the nozzle assembly with both hands and
gently twist in opposite directions. The insert
pins should snap into proper position.

2, Using both hands, position each thumb
on the removable insert, (below the
latches) and two fingers of each hand
on each latch, lift and disengage the two
latches from the tabs on the nozzle
body.
3, Gently pull the latches toward yourself
to remove the insert.
To reinstall the removable insert correctly,
follow these steps:
1. Place the removable insert on a flat
surface with the pins positioned upward
and the latches close to you as shown.
Place the rubber squeegee on the insert,

The wet nozzle
pickup use.
11

assembly

is ready for wet

.SP6503

Gallon

4/8/03

9:29

Repair Parts
20 Gallon Wet/Dry Vac
Model Number 113.177620
Always

order

by Part Number

WARNING
OF DOUBLE-INSULATED

SERVICING
In a double-insulated

Wet/Dry

instead

No grounding

of grounding.

appliance,

nor should

insulated

Wet/Dry

and should

marked

a means

be done

only

and

the

systems

means

of insulation

is provided
be added.
and

care
service

Vac
_

provided
a double-

of the system,

Replacement

parts

to the parts they replace.

with

within

are

Servicing

knowledge

personnel.

marked

(square

VAC

on a double-insulated

extreme

Vac must be identical

Wet/Dry
symbol

two

WET/DRY

for grounding

by qualified

Wet/Dry

double*insulated

INSULATED"

Vac,

Vac requires

for a double-insulated
Your

- Not by Key Number

the

words

a square)

"DOUBLE
may also

on the appliance.

Key
No.

Pa_ No.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
18
17
18
19
20
21
22
23
24
25
28
27
28
29
30
31
32
33
34

828952
813213
829971-4
830275
829693
819280-13
829718-5
9-16993
509822
820563-4
818961
818413-2
315534-1
826817
820563-5
829692
823200
823201
9-17816
9-16937
9-16938
830500
73185
828460
29776
9-16922
9-16978
9-17817
9-16902
822256
9-16964
9-17822
9-17895
SP8503

Description
Actuator, Switch
Switch, Toggle
Cover w/Labels
Duct, Exhaust
Motor (Includes Key No's 11, thru 14)
Lead Assembly
Cord w/Terminals
% Diffuser Assembly
Lid Assembly
* Screw, Pan Hd. Ty. "AB" 10 x 3/4 Ser.
Spacer
Blower Wheel
Washer
Nut, Hex Flange 5/16-18
* Screw, Pan Hd. Ty. "AB" 10 x 1-1/4 Ser.
Collector Assembly
Float
Filter Cage
% Filter (Red Stripe)
% Filter Plate
% Filter Nut
Drum
Cap, Drain
Foot, Caster w/Storage
Caster
% Utility Nozzle
%Car Nozzle
%Wet Nozzle
1 Crevice Tool
Squeegee
% Extension, Wands
% Pos-I-Lock Hose
% Disposable Filter Bag
Owner's Manual (Not illustrated)

%Stock Item- May Be Secured Through The Hardware Department Of Most Sears Retail Stores
* Standard Hardware Item - May Be Purchased Locally.
12

,SP6503

Gallon

4/8/03

9:29

Repair Parts
20 Gallon Wet/Dry Vac
Model Number 113.177620

22 \

25,_

t0\

30\
28

32\

.SP6503

Gallon

4/8/03

9:29

Notes

.SP6503

Gallon

4/8/03

9:29

.SP6503

Gallon

4/8/03

9:29

For in-home

major brand repair

service:

Call 24 hours a day, 7 days a week

1-800-4-MY-HOME
Para pedir

servicio

de reparaci6n

For the repair
Call 6 am

(1-800-469-4663)
a domicUio

or replacement
-

- %800-676-5811

parts you

need:

11 pm CST, 7 days a week

PartsDirect
1-800-366-PART
Para ordernar

piezas

con entrega

For the location

(1-800-366-7278)
a domicUio

- 1-800-659-7084

of a Sears Parts and Repair
in your area:

Center

Call 24 hours a day, 7 days a week

1-800-488-1222
For information
on purchasing a Sears Maintenance
Agreement
or to inquire about an existing Agreement:
Call 9 am

5 pm, Monday

- Saturday

1-800-827-6655
r

HomeCentral
The model

and serial

numbers

When requesting
service
following
information:
• Product Type
• Part Number

will be found

or ordering

parts,

on the handle.
always

provide

the

• Model Number
• Part Description

2003 Emerson
Sears, Roebuck and Co., Chicago,
Part No, SP6503

Form No, SP6503

IL 60179 U.S.A.
Printed in U,S.A, 04/03

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 16
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Aug 14 16:47:42 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 113177620 User Manual WET/DRY VAC Manuals And Guides L0309045

CRAFTSMAN Wet/Dry Vacuum Manual L0309045 CRAFTSMAN Wet/Dry Vacuum Owner's Manual, CRAFTSMAN Wet/Dry Vacuum installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation