Craftsman 17274545 User Manual WEEDWACKER Manuals And Guides L0807116

CRAFTSMAN Line Trimmers/Weedwackers, Electric Manual L0807116 CRAFTSMAN Line Trimmers/Weedwackers, Electric Owner's Manual, CRAFTSMAN Line Trimmers/Weedwackers, Electric installation guides

User Manual: Craftsman 17274545 17274545 CRAFTSMAN WEEDWACKER - Manuals and Guides View the owners manual for your CRAFTSMAN WEEDWACKER #17274545. Home:Lawn & Garden Parts:Craftsman Parts:17274545 Craftsman Grass trimmer (weed wacker) Manual

Open the PDF directly: View PDF .
Page Count: 14

Download
Open PDF In Browser	View PDF

Operator's Manual

I £RRFTSM

15-in. 5.5 Amp

Weedwacker_
Electric
Tr=mmer
Model No. 172.74545

CAUTION:
Read, understand and follow all
Safety Rules and Operating Instructions in this
Manual before using this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A
Visit our Craftsman® website: www.craftsman.com

•WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST

Warranty ............................................................................................
Safety Symbols ...................................................................................
Safety Instructions ................................................................................
Unpacking ........................................................................................
Description .........................................................................................
Assembly and Adjustments ..................................................................

Page
Page
Pages
Page
Pages
Pages

2
3
4 -9
10
11 - 13
13 - 17

Operation ..............................................................................................
Maintenance .........................................................................................
Accessories ................................................................................................
Parts List .............................................................................................

Pages
Pages
Pages
Pages

17 - 21
22
23
24 - 25

The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols, and the explanations with them, deserve your careful attention and
understanding. The symbol warnings DO NOT by themselves eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.

manual, including all safety alert symbols such as "DANGER", "WARNING"
using
this and
tool.understand
Failure to follow
all instructions
I and
z_ "CAUTION",
WARNING: BEFORE
BE SURE
to read
all safety
instructions listed
in this I
below may result in electric shock, fire and/or serious personal injury.
SYMBOL MEANING

SAFETY ALERT SYMBOL: IndicatesDANGER,WARNING,
OR

CAUTION. May be used in conjunction with other symbols or pictographs.

TWO Y EAR FULL WARRANTY ON CRAFTSMAN WEEDWACKER®
ELECTRIC TRIMMER

Failure to obey this safety warning WILL result in death or
serious injury to yourself or to others. Always follow the
safety precautions to reduce the risk of fire, electric shock
and personal injury.

If this Craftsman product fails due to a defect in material or workmanship
within two years from the date of purchase, RETURN ITTO ANY SEARS
STORE OR OTHER CRAFTSMAN OUTLET INTHE UNITED STATES
FOR FREE REPLACEMENT.
This warranty does not include expendable
batteries, bits, blades, or bonnets.

parts such as cutting line, lamps

I z_WARNING

Failure to obey this safety warning

safety precautions to reduce the risk of fire, electric
and personal injury.

if this Craftsman product is used for commercial or rental purposes, this
warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.

CAN result in death or

I serious injury to yourself or to others. Always follow the

I A CAUTION

shock

Failure to obey this safety warning MAY result in personal
injury to yourself or others or property damage, Always
follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.

Sears, Roebuck and Co., Hoffman Estates, tL
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of important information and/or instructions that could lead to
equipment or other property damage if not foIIowed. Each message is preceded by the word
"NOTE:" as in the example below:

,/K WARNING:
Some dust created by using lawn and garden power tools
contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm.

NOTE: Equipment and/or property damage may result if these instructions
are not followed.

z_WARNING:
The operation of any trimmer can result in
foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool
operation, ALWAYS wear safety goggles or safety glasses
with side shields and a full-face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields,
available at Sears Stores or other Craftsman Outlets.

SAVE THESE INSTRUCTIONS?
READ ALL INSTRUCTIONS!

if correctly used, this electric trimmer is an easy to handle and
efficient tool; if used improperly or without the due precautions it could become a
dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety
rules that are contained in this manual.

z_ WARNING:
BE SURE to read and understand all instructions in this manual
before using this electric trimmer. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.

Z_ WARNING:

z_ WARNING:

To avoid mistakes that could cause serious injury, DO NOT plug
in this trimmer until the following instructions have been read and understood.
WORK

AREA

SAFETY

f. ALWAYS avoid dangerous conditions.
expose to rain.

DO NOT use in wet or damp areas or

PERSONAL SAFETY cont.
5. USE SAFETY EQUIPMENT. Always wear safety goggles or safety glasses with side
shields or full face shield, proper work shoes with rubber non-slip soles, heaw-duty
non-slip rubber gloves and dust mask or respirator and hearing protection. Hard
hat should be used for appropriate conditions,
6. DO NOT overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
TOOL

USE AND CARE

SAFETY

Z_ WARNING:
BE SURE to read and understand all instructions before
operating this tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
1. DO NOT use the tool if switch does not turn it "On" or "Off".
controlled with the switch is dangerous and must be repaired.

2. DO NOT operate in the presence of flammable liquids, gases, or dust. Electric
tools create sparks which may ignite dust or fumes.

Any tool that cannot be

2. DISCONNECT the plug from the power source before making any adjustments,
changing cutting line, or storing the tool. Such preventive safety measures reduce the
risk of starting the tool accidentally.

3. ALWAYS keep bystanders and visitors at a safe distance while operating
a trimmer. NEVER allow children near the tool. Flying objects can injure anyone
in the area.

3. STORE idle tools out of the reach of children and other untrained persons. Children
MUST NOT operate the tool. Tools are dangerous in the hands of untrained users,
4. MAINTAIN tools with care. ALWAYS keep cutting tools clean and in good working order.

4. CHILDPROOF your tools with padlocks and master switches. Lock tools away when
not in use. This trimmer is not a toy.
5. DO NOT use trimmer at night. ALWAYS make sure you have adequate lighting.

5. CHECK for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. If damaged, have the tool serviced
before using, Many accidents are caused by poorly maintained tools,

6. BEFORE using the trimmer, remove any stones, sticks, debris or objects that could
be entangled in or thrown by the trimmer.

6. USE ONLY cutting line that is recommended for this trimmer. Cutting line that may be
suitable for one trimmer may become hazardous when used on another trimmer.

PERSONAL SAFETY

ELECTRICAL SAFETY

.4k WARNING:The
operation of any trimmer can result in FOREIGN OBJECTS
BEING THROWN, which can result in personal injury or property damage.
ALWAYS use proper safety equipment.

1. KNOW your tool. Road the operator's manual carefully. Learn the electric trimmer's
applications and limitations, as well as the specific potential hazards related to this tool.
2. STAY ALERT, watch what you are doing and use common sense when operating this tool.
3. DO NOT use tool while tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating this tool may result in serious personal injury.
4. DRESS properly. Wear rubber gloves and substantial rubber soled footwear when
working outdoors. DO NOT operate lawn and garden tools when barefoot or wearing
open sandals. Wear long pants and long sleeves to protect your legs and arms.
Trimmers can pick up objects such as rocks and send them flying at fast speeds.
DO NOT wear loose clothing or jewelry. Keep your hair, clothing, and gloves away
from moving parts. Loose clothing or long hair can be caught in moving parts.
4

Z_ WARNING:
Do not permit fingers to touch
the terminals of plug when installing or removing
the plug from the outlet,
1. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other).This plug will
fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install a polarized
outlet. Do not change or alter the plug in any way.
2. Double insulation [] eliminates the need for the
three-wire grounded power cord and grounded power
supply system. Applicable only to Class II (doubleinsulated) tools. This trimmer is a double insulated tool.

Cover of
Grounded
Outlet Box ....

@
@
@

ELECTRICAL

SAFETY

EXTENSION CORDS cont.

cont.

z_ WARNING:
GFCI (Ground Fault Circuit Interrupter) protection should be
provided on all circuits or outlets to be used for electric lawn and garden power
tools. Receptacles are available having built-in GFCI protection and should be
used for this measure of protection.

z_ WARNING:
Check extension cords before each use. If damaged replace
immediately. Never use tool with a damaged cord since touching the damaged
area cou d cause e ectr ca shock, resu t ng n set ous njury.

Ak, CAUTION: This trimmer has a 12-in. Pigtail Power Cord that must be
plugged into a proper extension cord (see below).

The label on your tool may include the following symbols.

V.......................................................................
Volts
A......................................................................
Amps
Hz....................................................................Hertz
W.....................................................................
Watts
rain ..................................................................Minutes
,_ ....................................................................
Alternating current
................................................................... Direct current
no ....................................................................
No-load speed
[] ....................................................................
Class II construction, Double Insulated
RPM.......................................................... Revolutionsper minute
SPM........................................................... Strokes per minute
OPM.......................................................... Orbits per minute
Z_ ....................................................................
Indicates danger,warning or caution.
It means attention! Your safety is involved.

Z_ WARNING:

Double insulation DOES NOT take the place of normal safety
precautions when operating this tool.
3. BEFORE plugging in the tool, BE SURE that the outlet voltage supplied is within
the voltage marked on the tool's data plate, DO NOT use "AC only" rated tools with a DC
power supply.
4. DO NOT expose tools to rain or wet conditions or use electric tools in wet or damp
locations. Water entering an electric tool will increase the risk of electric shock,
5. If operating an electric tool in damp locations is unavoidable, ALWAYS USE a
Ground Fault Circuit Interrupter to supply power to your tool. ALWAYS WEAR
electrician's rubber gloves and footwear in damp conditions.
6. When operating a power tool outside, ALWAYS use an outdoor extension cord marked
"W-A" or "W". these cords are rated for outdoor use and reduce the risk of electric shock.

SERVICE SAFETY

7. INSPECT tool cords for damage. Have damaged tool cords repaired at a Sears Service
Center. BE SURE to stay constantly aware of the cord location and keep it well away
from the spinning cutting lines.

1. If any part of this trimmer is missing or should break, bend, or fail in any way;
or should any electrical component fail to perform properly: SHUT OFF the
power switch and remove the trimmer plug from the power source and have the
missing, damaged or failed parts replaced BEFORE resuming operation.

8. DO NOT abuse the cord. NEVER use the cord to carry the tool by or to pull the plug
from the outlet. Keep cord away from heat, oil, sharp edges or moving pads. Replace
damaged cords immediately, Damaged cords increase the risk of electric shock.

2. Tool service should be performed at a Sears Parts and Repair Center. Service or
maintenance performed by unqualified personnel could result in a risk of injury,
3. When servicing a tool, use only identical replacement parts. Follow instructions
in the maintenance section of this manual. Use of unauthorized parts or failure to
follow maintenance instructions may create a risk of electric shock or injury.

EXTENSION CORDS
Use a proper extension cord, ONLY use cords listed by Underwriters Laboratories (UL),
Other extension cords can cause a drop in line voltage, resulting in a loss of power
and overheating of tool.

SAFETY

RULES

FOR ELECTRICTRIMMERS

For this tool an AWG (American Wire Gauge) size of a least 14-gauge is recommended
for an extension cord of 25- ft. or less in length. Use 12-gauge for an extension cord
of 50-ft. Extension cords 100-ft. or longer are not recommended.

1. KNOW your electric trimmer. Read operator's manual carefully. Learn the
applications and limitations, as well as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock, fire or serious injury,

Remember, a smaller wire gauge size has greater capacity than a larger number
(14-gauge wire has more capacity than 16-gauge wire; 12-gauge wire has more capacity
than 14-gauge). When in doubt use the smaller number.

2. DO NOT use trimmer without adequate lighting. ALWAYS make sure that you can
see what you are trimming and edging.

When operating a power tool outdoors, use an outdoor extension cord marked "W-A" or "W'.
These cords are rated for outdoor use and reduce the risk of electric shock.

4. ALWAYS remove objects such as stones, sticks, and debris from the trimming/edging
path that could become entangled in, or thrown by, the trimmer.

z_ CAUTION:

Keep the extension cord clear of the work area. Position the
cord so that it will not get caught on bushes, hedges, tree trunks, lawnmowers
or other obstructions while you are working with the trimmer.

3. Use trimmer ONLY when grass and weeds are dry.

5. ALWAYS hold the trimmer by both the main rear handle and the auxiliary handle
for greater control and balance. NEVER reach under the safety guard.
6. AVOID accidental
on the switch.

starting. DO NOT carry a plugged in trimmer with your finger
7

SAFETY RULES FOR ELECTRIC TRIMMERS cont,
z_ WARNING:
: Some dust particles created by lawn and garden tools
contain chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:

7. DO NOT carry the trimmer by the cord or pull the cord to disconnect it from the
receptacle. Keep cord away from heat, oil and sharp edges.
8. DO NOT grasp or touch the exposed cutting line when picking up or holding the trimmer.

• Compounds in fertilizers, herbicides, pesticides, and insecticides.
• Arsenic and chromium from chemically treated lumber.

9. DO NOT FORCE the trimmer. Do not try to cut more than what the trimmer is designed
for. It will do a better job with less chance of injury when used at the rate for which it is
designed.

Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:

10. MAINTAIN the trimmer with care. ALWAYS inspect the extension cord and replace
it if damaged.

• Work in a welt-ventilated area
• Work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.

11. KEEP the handle dry, clean and free of oil and grease. Use a clean cloth when cleaning.
DO NOT use solvents, brake fluids, gasoline, or other petroleum products to clean the
trimmer. They can damage plastic parts.
12. NEVER, for any reason, touch the cutting line or other moving parts during use.

z_ WARNING:
NEVER reach under the trimmer (cutting line area) until
trimmer has completely stopped. The trimmer's cutting line will continue to
rotate for a few seconds after it is switched off.

13. WHEN INSTALLING SAFETY GUARD OR CUTTING LINE OR CHANGING CUTTING LINE
SPOOL be careful of the line cutter on the guard. Cutter is sharp and can cause injury
(see page 14, Fig. 4a).
14. KEEP guard in place and in good working order. Keep guard positioned between you
and cutting line. Keep hands and feet away from cutting line.

ADDITIONAL

15. ALWAYS store the trimmer indoors when not in use. it should be stored in a dry place,
high up or locked in a place that is out of the reach of children.

RULES

FOR SAFE OPERATION

z_ WARNING:
BE SURE to read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.

16. ALWAYS use only the cutting line provided with this trimmer or sold by Sears.
Use of any other cutting line may create a hazardous situation.
17. ALWAYS keep ventilation openings clear of debris.
18. BEFORE using the trimmer, remove any stones, sticks, debris or objects that could be
entangled in or thrown by the trimmer.

ALWAYS wear safety glasses or eye shields when using this tool
Everyday eyeglasses have only impact-resistant lenses; tbey are NOT safety glasses.

19. NYLON CUTTING LINE Keep face, hands and feet clear of rotating nylon line at all times.

PROTECT your lungs. Wear a face mask, dust mask or respirator if the operation is dusty.

20. THE ROTATING LINE PERFORMS A CUTTING FUNCTION. Use care when trimming
around screens and flowers and other objects that you DO NOT want damaged or cut.

PROTECT your hearing. Wear appropriate personal hearing protection during use.
Under some conditions noise from this product may contribute to hearing loss.

21. KEEP ALL BYSTANDERS AWAY at a safe distance from the work area, especially children.
Make sure that persons and pets are at least 100 feet away.

ALL VISITORS AND BYSTANDERS MUST wear the same safety equipment that the
operator of the tool wears,

ALWAYS check the tool for damaged parts. Before further use of the tool, a guard
or other part that is damaged should be carefully checked to determine if it will operate
properly and perform its intended function, Check for misalignment or binding of moving
parts, breakage of parts, and any other condition that may affect the tool's operation.
A guard or other part that is damaged should be properly repaired or replaced
at a Sears Service center,

Z_ IMPORTANT

WARNING:

When this tool is being used as a trimmer or edger, stones and other objects
can be thrown out at high speed by the line. The tool and guard are designed to help
reduce the danger. However, the following special precautions should be taken.
TO REDUCE THE RISK of rebound or ricochet injury, always work away from any solid
objects such as walls, steps, large stones, landscape bricks, timbers, trees, etc.
Use extreme care when working close to solid objects and when necessary edge
or trim by hand.

SAVE THESE INSTRUCTIONS.
Refer to them frequently and use them
to instruct others who may use this tool. If someone borrows this tool, make sure
they have these instructions
also.

1. The trimmer comes assembled except for the safety guard and auxiliary
must be attached.

handle, which

KNOW YOUR TRIMMER / EDGER (Fig. 2, 2a, 2b and 3)
I

2, Removethe trimmer, auxiliary handle and safety guard from the carton and inspect
your trimmer.

operating
features
and safety
rules.
NOTE: Before
attempting
to use
this product,

familiarize yourself with all

3. Do not discard box or packing material until all parts are examined.

z_ WARNING:
If any part of the trimmer is missing or damaged, do not plug
in the trimmer until the damaged part is repaired or replaced.

Fig. 1

Your trimmer/edger has a precision built electric motor and it should only be connected
to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The trimmer
should always be used with a GFCI (Ground Fault Circuit interrupter) outlet.
DO NOT operate this trimmer on direct current (DC). The large voltage drop would cause
a loss of power and the motor would overheat.
if the trimmer does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet,
check the power supply. The trimmer comes with a 12-in, pigtail power cord and should
be plugged into a proper extension cord.

3. Auxiliary Handle
Mounting Bracket

PIGTAIL POWER CORD (Fig. 2 and 2a)
Fig. 2a
4. Knob and Screw to
Loosen or Tighten
_L_O-"_/)_
Handle (This knob _'_,_.
comes attached to "
the auxiliary handle
and mounts on
this (right) side)

1. Trimmer

Fig. 2b

Auxiliary Handle

7.4 Screw Holes
for attaching Safety
Guard to trimmer
head are located
around collar of
safety guard

Your trimmer/edger has a 12-inch pigtail power cord. This cord must be attached to a
proper extension cord (see page 6). Remove the plug guard from the pigtail power cord
(see Fig. 2). Make a loop in the extension cord. Push loop through hole in the handle
(see Fig. 2a). Fasten loop around cord retention hook. Plug trimmer's power cord into
extension cord plug (see Fig. 2b).
This Trimmer/Edger
1. 15-inch Cutting

e Guide
Safety Guard

has the following

features:

Path

2. Twist and Edge...Two
Tools in One...rear handle and upper shaft
(and auxiliary handle) easily rotates 180° for trimming or edging.
3. 5.5 Amp, 7200 RPM (no-load
in medium duty applications.

speed) motor.

Provides power for trimming and edging

4. Ergonomically
Designed Rear Handte for maximum control and gripping comfort
with reduced operator fatigue.

Trimmer

5. Four finger Trigger Switch for easy on / off.
6. 4-Position Trimmer Head easily adjusts to the desired working angle for optimum
operator control in all trimming and edging applications. From trimming around
hard-to-reach flower beds and shrubs, to deck supports, fences and stairways,
to edging sidewalks, driveways and landscaping.
10

7.4 Screws for attaching Safety Guard

This Trimmer/Edger

has the following features cont.:

7. Edge Guide provides a cutting guide to help protect flowers, plants, screens and fences
from being cut by trimmer line.
8. Adjustable Telescopic
working height.

Cutting

Path

15 inches

Shaft allows adjustments from 16 to 25 inches for your ideal

9. Lightweight and Ergonomicatly
efficient trimming and edging.
10. Bump-Feed

_ II
:[_IiI
[@#Ii[s]i
[.I

Designed

for easy use, handling comfort and

Head allows you to simply bump the trimmer head to advance cutting line.

11. Your Trimmer uses 0.065-in. round line. Use Craftsman 71-85967 bump feed
replacement spool and line. it's factory wound for maximum reliability.
12, Cord Retention Hook helps keep
the extension cord in place.
13, Safety Guard helps keep cuttings
and debris away from operator,

Trigger Switch Handle
4-Finger Trigger Switch

Speed

7200 RPM

Rating

5.5 Amp

Line Diameter

0.065 inch round

Line Feed Mechanism

Bump feed

Trimmer Head Tilt

4 positions

Adjust Height of Shaft

From 16 to 25 inches

Cord Length

12 inch Pigtail Power cord

Power Requirement

120-volt,

line

60 Hertz AC Only

Fig. 3

Auxiliary,
Cord Retention Hook
Auxiliary
Adjusting Knob

ustable
Telescopic

Top Black Collar for

Pigtail Power
Cord Plug

Top
Shaft180°
also
Rotates
for Edging

Adjusting Length
of Top Shaft

I NOTE: THE GUARD MUST BE ATTACHED to the trimmer head before use.

I
I

Rotating Top Shaft 180°
INSTALLING THE SAFETY GUARD (Figs. 4 and 4a )
1. Disconnect the trimmer from the power supply.
Trimmer Head

N
Motor
Housing

from the power outlet BEFORE installing parts or cleaning the trimmer or
the trimmer

I making
_ WARNING:
any adjustments.
To avoid injury, ALWAYS turn off and disconnect
position Adjustment

Air
Vents

2. Turn the trimmer's motor housing head over to provide access to underside base
of the head by the cutting line spool.
3. Locate the 4 screws in the base of the trimmer head and remove the screws (see Fig. 4).
Safety Guard
Bump-Feed

Edge Guide

Cutting Line

Head

ATTACHING THE AUXILIARY HANDLE cont. (Fig. 6 and 6a)

INSTALLING THE SAFETY GUARD cont. (Figs. 4 and 4a )
4. insert the edge of the guard into the slot along the back of the trimrner's head, carefullly
lining the 4 screw holes in the guard up with the 4 screw holes in the trimmer head.

NOTE: THE AUXILIARY HANDLE MUST BE ATTACHED to the trimmer shaft
before use.

,/h WARNING:
To avoid injury, ALWAYS turn off and disconnect the trimmer
from the power outlet BEFORE installing parts or cleaning the trimmer or
making any adjustments.

5. insert screws and securely attach the safety guard (see Fig. 4a).

NOTE: Safety Guard will only fit one way.

CAUTION:

Line cutter on edge of safety guard is sharp. Use caution

when handling.

Fig. 4

Fig. 4a

install Guard
with 4 screws

Line Cutter
_emove
4 Screws

Fig. 6

1. Disconnect the trimmer from the power supply.
2. Unscrew the auxiliary handle's tightening knob
(counterclockwise) and remove from handle.
3. Position auxiliary handle onto handle bracket
assembly located on trimmer's top-shaft (see Fig. 6).
4. Position the knob and screw through the auxiliary
handle and bracket, and tighten knob (turn clockwise).
Do not tighten completely until you have adjusted
the auxiliary handle to your desired working position.

z_ WARNING:
To avoid injury, adjust the auxiliary handle for maximum
control and balance. DO NOT overreach when operating the trimmer. ALWAYS
KEEP proper balance for better control of the tool in unexpected situations.

Fig. 6a

THE EDGE GUIDE (Fig. 5)
Fig. 5

Your trimmer comes with an Edge Guide
that is handy for use as a cutting guide.
it can be used to help keep the cutting line
away from items you don't want cut,
such as flowers, or damaged, such as
fences or screens.
Each end of the wire edge guide is force-fitted
into a hole located on each side of the trimmer's
head. To use the edge guide, pull (force) it down
into the guide position as shown in Fig. 5.

ADJUSTING THE AUXILIARY HANDLE (Fig. 6a)
1. The auxiliary handle's bracket can be moved up or down on the shaft and the auxiliary
handle itself can be moved forward or backward into 4 different locked positions (see Fig. 6a).
2. When the handle is in desired position, turn knob and tighten securely.
15

Trimmer
Use

ADJUSTING THE HEIGHT
(Fig. 7 and 7a)
The Tdmmer's Telescopic Shaft Comes
in the Collapsed Position

TO USE TRIMMER FOR EDGING:
ROTATE REAR HANDLE AND UPPER SHAFT 180 °
(Figs. 9, 9a and 10)
1. Disconnect the trimmer from the power supply.
2. To rotate the top shaft 180°, pull bottom collar down
(see Fig. 9) and rotate the top shaft with rear handle
(and auxiliary handle) 180%

1. To raise the telescopic shaft, twist
top collar (counterclockwise) to
unlock, and pull (extend) top of
shaft up, to desired height.

3. Release bottom collar to lock shaft in place.

2. Twist top collar (clockwise) to lock
top shaft in place.

Fig. 9

Fig. 9a

Fig. 10
Use

3. To lower or collapse the shaft simply
reverse the above steps, 1 and 2.

(coun[e[
clockwise)
to unlock

/_/t

Edger

_!'

Fig. 7

ADJUSTING

THE CUTTING

ANGLE

(Fig. 8)

Your trimmer has a 4-position tilting head that easily adjusts to the desired working angle
for optimum operator control and comfort. To adjust the trimmer head angle:

Rotale
to shaft,
re_ease
botlom
coltar
to lock

1. Disconnect the trimmer from the power supply.

/'}k WARNING:

To avoid injury,
ALWAYS turn off and disconnect
the trimmer from the power outlet
BEFORE installing parts or
cleaning the trimmer or making
any adjustments.

[o]II:1ll:l i [o]ll
Fig. 8

/N WARNING:
To avoid injury, DO NOT carry the trimmer with your finger
on the trigger switch.
A

WARNING:
If any part of the trimmer is missing or damaged, do not plug
in the trimmer until the damaged part is repaired or replaced.

2. Press the red trimmer head
adjustment button on the
motor housing (see Fig. 8).

PIGTAIL POWER CORD (See Figs. 2, 2a and 2b on page 11)
Your edger trimmer has a 12-inch pigtail power cord. This cord must be attached to a proper
extension cord. Refer to page 11, Figs. 2, 2a and 2b for attaching extension cord.
TURNING TRIMMER ON AND OFF

3. Move the trimmer head to
one of four different angles
and release the button.
Head will click into position.
Easily readjust the angle
to a more comfortable
or efficient position
as needed.

Your edger / trimmer has an extended length (4-finger) ON / OFF trigger switch.
Turning
1.
2.
3.
4.

Turning
BE SURE you are not pressing in on the trigger switch. Failure to do so could
/_ WARNING:
the power
outlet,
result
in accidental BEFORE
start-up, connecting
which may your
causetrimmer
serioustopersonal
injury.
16

Trimmer

Plug the trimmer's pigtail power cord into extension cord.
Plug extension into power outlet.
Squeeze trigger switch to start trimmer.
The trimmer will stay ON as long as the trigger switch is squeezed.
Trimmer

OFF

1. Release the trigger switch to turn trimmer OFR
2. Allow at least 5 seconds for the cutting spool (line) to stop rotating.
17

TRIMMING AND EDGING (Figs. 11 and 12)

EXTENDING

When trimming, cut from left to right for cutting efficiency; this throws the clippings away
from the operator (See Fig. 11).
To edge, rotate the shaft 180 ' (See Page 17, Figs. 8 and 9). Place edge guide and trimmer
head above the surface you are going to edge, as shown in Fig. 12.
Fig. 11

Fig. 12

Use as a
trimmer

Use as
an edger

THE CUTTING LINE (Fig. 13 and 13a)

During operation, cutting lines shorten due to normal wear. For greater convenience and
efficiency, your trimmer has been equipped with a bump feed head that allows you to
simply bump the trimmer head to extend the cutting lines while the trimmer is operating.
Cutting line will wear faster and require more feeding if the cutting or edging is done along
sidewalks or other abrasive surfaces or heavier weeds are being cut.
While the trimmer is on and spinning, gently bump the spool housing on a firm surface
(hard ground or sidewalk). This should release additional cutting line from the spool.
2. If no line is released, bump the trimmer head more sharply or try bumping it on
a firmer surface.
3. If there is no change in the cutting line length, un-plug the trimmer's pigtail power cord
from the extension cord. After the trimmer head stops rotating, gently pull at the cutting
lines manually. Once the lines are pulled out (extended), plug the tdmmer's pigtail
power cord into the extension cord and resume cutting.
4_

Gloves

If the cutting line still does not feed from
the spool, the spool might be empty or the
cutting line may be tangled or jammed on
the spool. Un-plug the trimmer's pigtail
power cord from the extenson cord.
After the trimmer head stops rotating,
remove the spool (see steps
1 through 3 in "Removing the Spool" on
page 20).

Fig. 13

If the line is tangled or jammed, untangle
and replace the line (see page 20).
If the spool is empty, replace the spool
(see page 20-21).

NOTE: ALWAYS keep the air vents on the trimmer head (motor housing) free
of obstructions when operating the trimmer.
Z_ WARNING:The
operation of any trimmer can result in FOREIGN OBJECTS
BEING THROWN, which can result in personal injury or property damage.
ALWAYS use proper safety equipment and keep bystanders safely away.
18

Bump on firm surface

from the power outlet BEFORE installing parts or cleaning the trimmer or
/_ WARNING:
To avoid injury, ALWAYS turn off and disconnect the trimmer
making
any adjustments.
19

TO REPLACE CUTTING LINE (Fig. 14)
REMOVE THE SPOOL

FILLING SPOOL WITH
CUTTING LINE cont. (Fig. 15)

For easy spool replacement we recommend using Craftsman 71-85967, bump feed
replacement spool with 0.065 cutting line. tt is factory wound for maximum reliability.

4. When the wound cutting line reaches the
eyeiets (recesses), and cut the line. Temporarily
park the line in the spool rail notch on one
side of the spool as shown in Fig. t5

1. Disconnect the trimmer from the power supply. Turn trimmer over
to access spool head cover.

/K WARNING:
To avoid injury, ALWAYS turn off and disconnect the trimmer
from the power outlet BEFORE installing parts or cleaning the trimmer
or making any adjustments.
2. Press the release tabs on the spool head
cover and remove cover, pulling it straight
off of spool.

Spool Head Cover
Fig. 14

3. Lift the spool out of the spool housing.

RIGHT

WRONG

5. Repeat the above procedure for the second
cutting line on the lower section of the spool
6. Fit the spool onto the toot as described in
"REPLACE THE SPOOL" page 20

Z_ CAUTION:

Before you begin trimming, only use the appropriate type of
cutting line. Ensure that cutting line is present in both sections of the spool.
(Fig. 15).

Release
tabs

REPLACE THE SPOOL
1. Replace the spool with a
factory pre-wound spool,
71-85967, available from
store or other Craftsman

Fig. 15

new
Craftsman
your Sears
outlet.

OPERATING TIPS
Spool
Rail

2. Insert the end of one line through
an eyelet in the spool housing.
Insert the other line through the
other eyelet.

2. Be sure to check the auxiliary handle before each use, to make sure it is firmly
tightened into desired working position.
3. Before trimming, inspect the area for string, wire, branches, rocks, toys, or other
objects that could be entangled in or thrown by the cutting line.

Cutting Line

3. Insert the spool into housing and
press it down gently until you feel
it drop into place.Take care to keep
the line from becoming trapped
under the spool.

Before each use make sure the protective safety guard is securely installed.
Tighten the guard screws, but DO NOT over tighten.

4. Stand with the cutting head tipped down at an angle in front, guiding the trimmer in a
semi-circular motion around you.
5. Cut from left to right whenever possible. Cutting to the right improves the unit's cutting
efficiency and clippings are thrown away from the operator.

4. Snap the spool head cover back on
and at the same time pull lines and
be sure that they are released from
spool rail notch.

Spool
Rail
Notch

6. To produce a smoothly trimmed area, move the trimmer in and out of the area being
cut with constant speed and height.

"Eyelet

7. Use only the tip of the cutting line to do the trimming, especially near walls and fences.
Trimming with the side of the cutting line may overload the motor, wear out the line
faster, and break the line more often.

FILLING SPOOL WITH CUTTING LINE

You may wind new cutting line onto an empty
spool. Replacement packs of 0.065 inch
(1.65mm) Craftsman Cutting Line 71-85822
are available from your Sears store.

1. Remove the empty spool from the tool
as described in "REMOVETHE SPOOL"above.

9. When cutting vegetation that is over 6 inches in height, work from top to bottom
in small increments to avoid premature line wear or engine drag.

Cutting Line

2. Remove any remaining cutting line from the spool.
3. First wind new line onto the uppermost part of the spool. Feed 3/4 inch of cutting line
into one of the line anchoring slots. Wind the cutting line onto the spool in the direction
of the arrow on the spool. Make sure to wind the line neatly and in layers Do not
crisscross (see Fig. 15).
20

DO NOT rest the trimmer spool on the ground while you are trimming. This will cause
spool wear.

10. When the trimmer is stopped and the spool stops rotating, the cutting line will relax
and may recede. Feed extra cutting line before storing the trimmer to prevent losing
the line in the spool housing.
11. If the diameter of the cutting area gets smaller, the line is worn down and needs to be
advanced.
12. If the trimmer is not cutting correctly, the cutting line may not be feeding properly.
Remove and rewind the line spool.
(See FILLING SPOOL WlTH CUTTING LINE, pg. 20).
21

z_ WARNING:
To avoid injury, ALWAYS turn off and disconnect the trimmer
from the power outlet BEFORE installing line, cleaning the trimmer or making
any adjustments.

are not recommended for this tool will be dangerous and can result in serious
injury. DoThe
notuse
attempt
to use fishing
line or other (cutting
lines that
arethat
not
I personal
_ WARNING:
of attachments
or accessories
line)
recommended.

GENERAL MAINTENANCE
Keep your trimmer clean and in good repair for maximum long-lasting performance.
each use, inspect the switch and cord for damage.

REPLACEMENT

Before

SPOOLS

Replace the spoof with a new pre-wound spoof (Craftsman Spoof 71-85967).

Check for damaged, missing, or worn parts. Check for loose screws, misatignment, moving
parts that are jammed, or any other conditions that may affect the operation, if abnormal
vibration or noise occurs, turn off the tool immediately and have the problem corrected
before further use.

REPLACEMENT

CUTTING LINE

if you are replacing the cutting line, ONLY use nylon monofilament
(Craftsman Cutting Line 71-85822).

DO NOT use the trimmer if it has any broken parts. Have damaged, missing, worn
or broken parts replaced before using trimmer.

single-wound 0.065 line

Line and spools are available at Sears Stores or other Craftsman outlets.
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.

z_, WARNING: To avoid injury, ALWAYS turn off and disconnect the trimmer
from the power outlet BEFORE installing line, cleaning the trimmer or making
I any adjustments.

CLEANING

/K WARNING:
To avoid injury, ALWAYS turn off and disconnect the trimmer
from the power outlet BEFORE installing line, cleaning the trimmer or making
any adjustments.

Z_ WARNING:

To avoid damage or electric shock, DO NOT use strong
solvents or detergents on the plastic housing or plastic components. Certain
household cleaners may damage plastic and may also cause a shock hazard.

I
I

NEED MORE HELP?
Youq_ find

the answer and a more on managemyhomeocom

= Find this and a[[ your other product manuals online.
Wipe the outside of the trimmer with a dry, soft cloth.
DO NOT hose down or wash the trimmer with water. Scrape the guard and spool
area to remove dried clippings and mud. Brush or blow dust, debris and grass clippings
out of the air vents

, Get answers from our team of home experts,

ALWAYS keep the air vents free from obstruction when operating the trimmer.

manage

= Get a personaUzed maintenance
= Find information

p[an for your home.

and tools to help with home projects.

home
brought to y_u by Sears

- for free!

15-in.
Weedwacker
Electric
Trimmer

Model NO. 172,74545

The modelnumberwill
be found on the nameplate
of the Trimmer.
Alwaysmentionthe
model numberwhen
requestingparts and
servicefor your tool.

\
\
\

120V
Wiring
scheme
o

18 OV 6OHz

so\

32\
o

10_

15-in. Weedwacker

® Electric

Trimmer

ModelNo, 172,74545

Item No,
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
2O
21
22
23

[

The modelnumberwill be found on the nameplate
of the Trimmer. Always mentionthe modelnumberwhen
requestingparts and servicefor your tool.

Parts No,

Part Description

Qty,

Item No,

GGT4502U-1
GGT4502U-2

Cable Assembly
Insulation Sheath

GGT4502U-3
GGT4502U-4
GGT4502U-5
GGT4502U-6

Press Plate

1
1
1
2

3O
31
32
33

GGT4502U-7
GGT4502U-8
GGT4502U-9
GGT4502U-10

Spring 0.8X8.8X23
Left Handle

1
1
1
1

34
35
36
38

GGT4502U-11
GGT4502U-12
GGT4502U-13
GGT4502U-14

Right Handle
Self Tapping Screw(ST3.gx16)
Screw (M4X32)
Nut 4

1
24
1
2

39
40
41
42

lighten Collar
Steady Handle Supper

GGT4502U-15
GGT4502U-16
GGT4502U-17
GGT4502U-18

Steady Handle Cover
Pivot Release Lever
Stud M6X65
Nut 6

1
1
1
1

43
45
46
47

GGT4502U-19
GGT4502U-20
GGT4502U-21
GGT4502U-22

Telescope Tube
Spring line
Swivel Shell Loc
Swivel Cover Shell

1
1
1
1

48
49
5O
51
52
53
54

Self Tapping Screw(ST3.gx13)
Switch
Switch Button

Parts No,

Part Description

Qty,

GGT4502U-30
GGT4502U-31

Right Housing
Left Housing husk

GGT4502U-32
GGT4502U-33
GGT4502U-34
GGT4502U-35

Right Housing husk
Edging Space
Guard

1
1
1
1

GGT4502U-36
GGT4502U-38
GGT4502U-39
GGT4502U-40

Cuting Head&Rivet
spring 1X13X29.5
B-1 Nut 6

GGT4502U-41
GGT4502U-42
GGT4502U-43
GGT4502U-45

Winding Spool&Cutting Line
Bottom Cover

GGT4502U-46
GGT4502U-47
GGT4502U-48
GGT4502U-49

Brush Holder

GGT4502U-50
GGT4502U-51
GGT4502U-52
GGT4502U-53

Stator (120V)
Washer(_-)
Washer(_)

Cutting Blade

Insulation Cap

Winding Spool decorate Cover
Carbon Brush
Brush Holder Assmebly
Rivet
Rear Bracket

1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1

GGT4502U-23

Swivel Shell Loc husk

1
1
1

GGT4502U-24

Swivel Cover Shell husk

GGT4502U-54
GGT4502U-55

GGT4502U-25

Lock Button

GGT4502U-56

Armature(120V/
Washer(--)
Bearing 608Z
Front Bracket

2
1
2
1

GGT4502U-26

spring

GGT4502U-57

Stud M4X55

GGT4502U-27

GGT4502U-58

Washer byAxis

GGT4502U-28

Self Tapping Screw(ST2.9xl 6)
Screw (M4X35)

GGT4502U-59

Fixing Block

GGT4502U-29

Left Housing

GGT4502U-60

metalSelfTappingScrew(ST3xt0)

Your
For expert troubleshooting

Home
and home solutions advice:

www.rnanagemyhorne.com

For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself,
For Sears professional installation of home appliances
and items like garage door openers and water heaters.

1-800-4-MY-HOME
(1-800-469-4663)

® caIt anytime,day or night
(US.A. and Canada)

www.sears.com

www.sears.ca

Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of the nearest
Sears Parts & Repair Service Center
1-800-488-1222

(USA)

www.sears.com

1-800-469-4663

(Canada)

www.sears.ca

To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655

(U.S.A.)

Para pedir servicio de reparaci6n
a domicilio, y para ordenar piezas:
............
1-888-SU-HOGAR®
1-888-784_427)

1-800-361-6665

(Canada)

Au Canada pour service en frangais:
1.800.LE.FOYERMC
(1-800_533-6937)
www.sears.ca

¢) SearsBrands,LLC
TM
SM
(_) Registered
Trademark
/
Trademark
/
Service
Mark of Sears Brands.
R
(RpMarca
Registrada
/ TM Marca
de Fabdca
/ SM Marca
de Servicio
de Sears
r_ic
MD
Marque
de commerce
/
Marque
deposee
de Sea_'s
Brands,
LLC

LLC
Brands,

LLC

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 14
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Tue Jul 22 04:54:24 2008
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 17274545 User Manual WEEDWACKER Manuals And Guides L0807116

CRAFTSMAN Line Trimmers/Weedwackers, Electric Manual L0807116 CRAFTSMAN Line Trimmers/Weedwackers, Electric Owner's Manual, CRAFTSMAN Line Trimmers/Weedwackers, Electric installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation