Craftsman 315222560 User Manual CORDLESS DRILL DRIVER Manuals And Guides L0312182
CRAFTSMAN Drill Driver Manual L0312182 CRAFTSMAN Drill Driver Owner's Manual, CRAFTSMAN Drill Driver installation guides
User Manual: Craftsman 315222560 315222560 CRAFTSMAN CORDLESS DRILL-DRIVER - Manuals and Guides View the owners manual for your CRAFTSMAN CORDLESS DRILL-DRIVER #315222560. Home:Tool Parts:Craftsman Parts:Craftsman CORDLESS DRILL-DRIVER Manual
Open the PDF directly: View PDF .
Page Count: 16
Download | ![]() |
Open PDF In Browser | View PDF |
Owner's Manual 10 mm (3/8 in.), 16.8 VOLT CORDLESS DRILL-DRIVER Variable Speed / Reversible Canadian Model No. 315.222560 Ryobi Save this manual for future reference A= CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-877-369-8665 Sold by: Sears Canada Inc., Toronto M5B 2B8 Visit the Craftsman web page: www.sears.com/craftsman 972000-889 5-01 • Safety • Features • Operation , Maintenance • Parts List • Warranty ......................................................................................................................................................... • • Intreduction and Product Specifications......................................................................................................... 2 Rules For Safe Operation ........................................................................................................................... 3-5 • A. ImportantSafety Rules For Batter/Tools .............................................................................................. B. ImportantSafety InstructionsFor Charger ............................................................................................. C. ImportantInformationFor RechargingHot Batteries ............................................................................. Features ......................................................................................................................................................... • • Operation................................................................................................................................................... 7-12 Maintecance ................................................................................................................................................. 13 • Exploded View and Repair Parts List........................................................................................................... 15 • Parts Ordering / Service ............................................................................................................................... 16 FULL TWO YEAR WARRANTY ON CRAFTSMAN 2 4 4 5 6 TOOL If this I;RnFTZNRN Tool fails to operate within two years from the date of purchase,return it to the nearest Sears Canada Inc. ("Sears") store and =Sears" will repair it, free of charge. If this tool is used for commendal or rental purposes,this warranty applies for only90 days from the date of purchase. This warranty is in addition to any statutory warranty. Sears Canada Inc., Toronto M5B 2B8 SPECIFICATIONS: Your drill-driver has many features for making drilling operations more pleasant and enjoyable, Safety, performance and dependabilityhave been given top priorityin the design of this drill-drivermaking it easy to maintainand operate. Chuck Capacity Motor Charger Rating No Load Speed Switch CAUTION: Carefully read through this entire owners manual before using your new drill-driver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your drill-driver properly and only for what it is intended, you will enjoy years of safe, reliable service, ,_ Charge Rate MaximumTorque 3/8 in. 16,8 Volt DC 120 Volts, 60 Hz, AC Only 0 - 350 / 0 - 1300 RPM Vadeble Speed - Reversible 1 Hour 340 in./Ibs. WARNING: The operation of any power tool can resultin foreignobjects being thrown intoyour eyes, which can result in severe eye damage. Before beginningpower tool operation, always wear safety goggles or safety glasses with side shieldsand a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields,available at Sears Retail Stores. 2 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, dese_e your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give am not substitutes for proper accident prevention measures. SYMBOL MEANING 41 SAFETY ALERT SYMBOL: & WARNING: Failureto obey a safety warningcan result in sadous injuryto yourself or to others. Always followthe safety precautionsto reduce the dsk of fire, electric shockand personalinjury, 41 CAUTION: Failureto obey a safety warningmay result in propertydamage or personalinjuryto yourself or to others. Always follow the safety precautionsto reduce the dsk of fire, electricshook and personal injury, NOTE: Advisesyou of informationor instructionsvital to the operation or maintenance of the equipment. Indicates warning or caution. May be used in conjunctionwith other symbolsor plotagraphs. WARNING: Do not attemptto opereta this tool until you have read thoroughlyand understand completely all instructions,safety roles, etc, contained in this manual. Failure to complycan resultin accidents involvingfirs, electricshock,or serious personalinjury.Save owners manual and review frequently for continuingsafe operation, and instructingotherswho may usa this tool. • USE RIGHT TOOL. Don'tforce small tool or attachmentto do the job of a heavy duty tool. Don't use tool for purpose not Intended- for example - A cimular saw shouldnever be used for cuttingtree limbsor logs. • WEAR PROPER APPAREL, Do not wear loose clothing or jewelry that can get caught in tool's moving parts and cause personalinjury. Rubber glovesand nonskidfootwear are recommended when working outdoors.Wear protective hair covedng to contain long hair and keep it from being drawn into nearby air vents. l ALWAYS WEAR SAFETY GLASSES, Everyday eyeglasses have only impact-resistantlenses; they are NOT safety glasses, READ ALL INSTRUCTIONS KNOW YOUR POWER TOOL. Read owner's manual carefully. Learn its applicationsand limitationsas well as the specificpotential hazards related to this tool. l GUARD AGAINST ELECTRICAL SHOCK by preventingbody contact with grounded surfaces. For example: Pipes, radiators, ranges, refrigerator enclosures. l KEEP WORK AREA CLEAN. Cluttered areas and benches inviteaccidents. M AVOID DANGEROUS ENVIRONMENT, Don't use powertool in damp orwet locationsor expose to rein. Keep work area well lit. • KEEP CHILDREN AND VISITORS AWAY. All visitors shouldwear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord. l PROTECT YOUR LUNGS. Wear a face mask or dust mask if operation is dusty, M PROTECT YOUR HEARING. Wear hearing protectionduringextended periods of operation. SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both handsto operate tool. l DON'T OVERREACH. Keep properfootingand balance at all times. Do not use on a ladder or unstable support, l MAINTAIN TOOLS WITH CARE, Keep tools sharp at all times, and clean for best and safest performance, Follow instructionsfor lubricating and changingaccessories, l REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on, STORE IDLE TOOLS. When not in use tools shouldbe stored in a dry and high or lacked-up place - out of the reach of children. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 3 RULES FOR SAFE OPERATION (Continued) I NEVER USE IN AN EXPLOSNE ATMOSPHERE. Normal sparking of the motorcould igniteflammable liquids,gases, or fumes, DO NOT PLACE BATTERY TOOLS OR THEIR BA'I-FERIES NEAR FIRE OR HEAT. They may explode. I KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean clothwhen cleaning. Never use brake fluids, gasoline, petroleum-based productsor any strongsotventsto clean your tool. DO NOT CHARGE BATrERY TOOL IN A DAMP OR WET LOCATION. I STAY ALERT, Watch what you are doing and use common sense. Do not operate toolwhen you are tired. Do not rush. I CHECK DAMAGED PARTS. Beforefurther use of the tool, a guard or other part that isdamaged shouldbe carefully checked to determine that it willoperate properly and perform its intended function. Check for alignment of moving parts, bindingof moving parts, breakage of parts, mounting,and any other conditionsthat may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicatedelsewhere in this instructionmanual. I DO NOT USE TOOL IF _NI'I'CH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center. DRUGS, ALCOHOL, MEDICATION, Do not operate tool while under the influenceof drugs, alcohol, or any medication. DRILLING OR DRIVING SCREWS INTO ELECTRICAL WIRING IN WALLS, CEILINGS, OR OTHER AREAS CAN CAUSE THE BIT OR CHUCK TO BECOME ELECTRICALLY LIVE. Do not touch metal parts when drillingintoa wall; grasp onlythe insulated handle(s) or plastic housingwhen using this tool. Make sure hidden electrical wiring, water pipes, and mechanical hazards are not in the path of the bit when drillinginto a wall, • Your battery tool shouldbe charged in a location where the temperature is more than 50°F bLt less than 100°F. Under extreme usage or temperature conditions, batten/leakage may occur, If liquidcomes in contact with your skin,wash immediately with soap and water, then neutralize with lemonjuice or vinegar. If liquidgets in your eyes, flush them with clean water for at least 1O minutes,then seek immediate medical attention. If canying your battery tool at your side, make sure it is not runningand your finger is not on the switch.Avoid accidental starting, SECURE WORK before applying power. NEVER hold workplace in your hand or across your legs. WHEN SERVICING USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS, IMPORTANT CHARGER • SAFETY INSTRUCTIONS FOR SAVE THESE INSTRUCTIONS. This manual contains importantsafety and operating instructionsfor batter/charger part number 982245-001. Before using battery charger, read all instructions and cautionarymarkings in this manual, on battery charger, and product using battery charger. A WARNING: To reduce dskof injury,charge only nickel-cadmiumtype rechargeable bettedes. Other typas of batteries may burstcausing personal Injuryand damage. INSPECT FOR and remove all nails from lumber Do not expose cherger to rain or snow. before ddUing. IMPORTANT TOOLS SAFETY RULES FOR BATTERY I Battery tools do not have to be plugged into an electrical outlet;therefore, they are always in operating condition.Be aware of possible hazards when not using your battery tool or when changing accessories. USE ONLY THE CHARGER PROVIDED WITH YOUR BATTERY TOOL. Do not substituteany other charger. Use of another charger could cause batteries to explode causing possible serious injury. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock,or injuryto parsons. To reduce dsk of damage to charger body and cord, pull by charger body rather than cord when disconnecting charger, I Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress, RULES FOR SAFE OPERATION M (Continued) An extension cord should not be used unless absolutelynecessary, Use of improper e_tension cord could result in a dsk offiro and electdc shock. If extension cord must be used, make sure: a, That wire size is large enoughfor AC ampere rating of charger as specified below: Cord Length (Feet) 25' 50' 100' Cord Size (AWG) 16 16 16 Note: AWG = Amedcan Wire Gage M Do not operate charger if it has received a sharp blow, been dmppad, or otherwise damaged In any way; take it to a qualified serviceman, M Do not disassemble charger;, take it to e qualified serviceman when service or repair is required. Incorrectreassembly may result in a risk of electdc shock or fire. M To reduce dsk of electdc shock, unplug charger from outlet before attempting any maintenance or cleaning, Turning off controls will not reduce this dsk. • Do not use charger outdoors, • Disconnectcharger from power supplywhen not in use. That pinson plug of extension cord are the same number, size and shape as those of plug on charger. b, That extension cord is properlywired and in good electrical condition;and c. M DO NOT OPERATE CHARGER WITH A DAMAGED CORD OR PLUG, If damaged, have replaced immediately by a qualified SAVE THESE INSTRUCTIONS. Refer to them frequentlyand use them to instructothers who may use this tool. If you loan someonethis tool, loanthem these instructionsalso. serviceman. Look for this symbol to point out important safety precautions. safety is involved. IMPORTANT INFORMATION FOR RECHARGING It means attantionf!! Your HOT BATTERIES When usingyour drill-drive! continuously, the batteries in your battery pack will become hat. You should leta hot battery pack cool down for approximately 30 minutes before attemptingto recharge. When the battery peck becomes discharged and is hot, this will cause the yellow and green lightson your battery charger to come on instead of the red light. The yellow and green lights indicate soft start mode and will switchto green only, indicating slow charge mode. The red light indicatesfast charge mode, 1 hour charge time. The green light indicates slow charge mode, requiring overnight chargingfor batteries to roachfull charge. If the green lightcomes on after letting battery pack cool down, remove it from charger for additionalcooling.0 nce the battery pack cools down, you can recharge battery pack in fast charge mode as normal. Do not leave a hot battery peck in charger until it coolsdown, The green lightwill not go off when battery pack cools, If fast charga mode is desired, you must physicallyremove a hot battery pack from the charger, let it cool, then place it back in charger after it has cooled down. Note: This situationonly occurswhen continuous use of your drillcauses the batteriesto become hot, It does not occur under normal cimumstances. Refer to "CHARGING BA'I-rERY PACK" for normal rechargingof batteries. If the charger does not charge your battery pack under normal circumstances,return both the battery pack and charger to your nearest Sears repair center for electrical check. KNOWYOURDRILL-DRIVER WRIST STRAP See Figun51. See Figure 1. Beforeattempting to use any toolfaml/iarize yourself with all operatingfeaturas and safety requirements. A wdst strap is providedto reduce the chances of droppingyour drill-driver,Place one hand throughthe wdst stropwhen carryingtool, BA'n'ERYPACK TWO.SPEED GEARTRAIN(HI-LO) BITSTORAGE LEVEL DIRECTION OF ROTATION SELECTOR JGHTS INDICATESOFTSTARTMODE SWITCH TNGGER :I'iARGI NG MODE BA'n'ERY _ CHARGER _ WRISTSTRAP SCREWDRIVER BITS Fig. 1 _i_ WARN ING: If any parts are milming,do not operate tool untiJthe missingparts are replaced. Failureto do so could result in possible sedous personal injury. • Normally, the yellow and green lights on charger will come on. This indicates charger is in soft start mode end shouldswitch to fast charge mode within 5 minutes.When charger is in fast charge mode the red lightwill come on. If after a period of 15 minutesthe yellow and green lights remain on, remove battery pack, wait 1 minuteand reinsert battery pack in charger. If the yellow and green lightscontinueto remain on after an additional 15 minutes, the bettery pack is damaged and will not accept a charge. Return battery packto your nearest Seers Repair Center for checking or replacing. WARNING:Alwayswearsafetygoggles or safetyglasses withsideshields whenoperating tools.Failureto dosocouldresultinobjects beingthrownintoyoureyes, resulting in possible sedous injury. _lb WARNING: Do not allow familJadtywith your drill-ddverto make you careless. Remember that a careless fraction of a secondis sufficientto inflictsevere injury. CHARGING BA'I-rERY PACK The battery pack for this tool has been shippedin a low charge conditionto prevent possible problems, Therefore, you shouldcharge it until lighton front of charger changes from red to green. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (ddlling followed by recharging) for them to become fully charged. When your battery pack becomes fully charged, the red lightwill turn OFF and the green light willturn ON. • After normal usage, 1 hour of chargingtime is required to be fullycharged, A minimumcharge time of 1-1/2 hours is required to recharge a completely dischargedtool. • The battery pack will become slightlywarm to the touchwhile charging.This is normal and does not indicatea problem. TO CHARGE • Charge battery pack only with the charger provided, • • Make sure power supply is normal household voltage, 120 volts, 60 Ha, AC only. Do not place charger in an area of extreme heat or cold. It willwork best at normal roomtemperature. • When bettedes become fully charged, unplug chorger from power supply and remove the battery pack. • Connect charger to power supply. • Place battery pack in charger aligning raised db in charger with groove in battery pack. • Press down on battery pack to be sure contactson battery pack engage propady with charger contacts. LED FUNCTION • OF CHARGER LED WILL BE LIGHTED TO INDICATE STATUS OF CHARGER AND BA3"FERYPACK: • Red LED Lighted-- Fast Charging Mode. • Green LED Lighted= Slow Charging Mode and Fully Charged BatteP/Pack. • Yellow and Green LED Lighted= Soft Start Mode, orAfter 1/2 Hour Equals Hot or Defective Battery Pack. 7 SWITCH TO INSTALL See Figure 2. • SWITCH TRIGGER VAR_BLE SELECTOR PACK Lock switch tdgger on your drillby placingthe directionof rotation selector in center position, See Fkjum 5. Place battery pack in your ddll, Align raised rib inside ddll with groove on battery pack, See Figure 4. To turn your drill ON. depress the switchtdgger. To turn it OFF, release the switch trigger. cENTERPOSITION (LOCK_ BATrERY • Fig. 2 SPEED BAITERYPACK Thistool hasa variable speed switch that delivershigher speedand torquewithincreasedtdgger pressure.Speed iscontrolledbythe amountof switchtriggerdepression. LATCHES Note: You might hear a whistling or dnging noise from the switchduring use. Do not be concemed, this isa normal part of the switch function, TWO-SPEED GEAR TRAIN See Figure 3. Your drill has a two-speed geer train designed for ddningor driving at HI or LO speeds. A slide switch is locatedon top of your ddll to select either HI or LO speed. When using drill in the HI speed range, speed will increase and unitwill have less power and torque. When using drill in the LO speed range, speed will decrease and unitwill have more power and torque. Use HI speed for fast drillingor drivingapplications and LO speed for high power and torque applications. LOSPEED TWOSPEED GEARTRAIN(HI-LO) DEPRESSLATCHES TO RELEASE BATTERYPACK • A HI SPEED Fig. 4 Make sure the latches on each side of your battery pack snap into place and battery pack is secured in drillbafom beginning operation. CAUTION: When placing battery pack in your drill, be sure raised db inside ddll alignswith groove on battery pack and latches snap in place properly.Improper assembly of battery pack can cause damage to internalcomponents, TO REMOVEBATrERYPACK • Lock switch trigger on your drill by placingthe directionof rotationselector in center position, See Figure 5. • Locate latches on end of battery pack and depress to release battery pack from your drill. See Figure 4. II Remove battery pack from your drill. Fig, 3 SWITCHLOCK See Figure 5. The switchtriggercan be locked in the OFF position. This feature can be used to prevent the possibilityof accidental startingwhen not in use. To lock switch trigger, place the directionof rotationselector in center position, CENTERPosmoN (LOCK) SELECTOR REVERSE 1-7/I6 In, BACKSIDE OFCHARGER SWITCH TRIGGER ,_ KEYLESS CHUCK f FORWARD Fig. 6 See Figure 7. Fig, 5 Yournew ddllhas a kaylesschuck.As the name implies, you can handtightenor releaseddll bits inthe chuck jaws, Grasp and holdthe collarof the chuckwithone hand.Rotate the chuckbodywithyour otherhand. The anows on the chuck indicatewhichdirectionto rctate the chuck bodyin orderto LOCK (tighten)or UNLOCK (release)the drillbit. WARN IN G : Battery toolsare always in operating condition. Therefore, switch should always be lockedwhen not in use or carrying at your side, REVERSIBLE See Figure 5. UNLOCK (RELEASE) This tool has the featura of being reversible.The directionof rotationis controlled by a selector located above the switchtdgger. With the ddll held in normal operating position,the directionof rotationselector shouldhe positionedto the leftof the switch for drilling.The ddllingdirection is reversed when the selector'is to the dght of the switch,When the selector is in center position,the switch trigger is locked, _L CAUTION: To prevent gear damage, always allow chuck to come to a complete stop before changing the diroctionof rotationor the twospeed gear train (hi-lo). CHUCK BODY DRILLBiT LOCK (TIGHTEN) CHUCKCOLLAR To stop, release switoh tdgger and allow the chuck to come to a complete stop. Fig. 7 WARNING: Do not hold chuck bodywith one hand and use power of the ddll to tighten chuck jaws on drill bits,Chuck bodycould slip in your hand or your hand could slipand come in contact with rotatingddll bit. This could cause an accident resultingin sadous personal injurY. CHARGER See Figure 6. Your charger has a "key hole" hanging feature for convenient, space savingstorage. Screws shouldbe installedso that center distancesare 1-7/16 inches apa_. 9 INSTALLINGBITS REMOVING BITS See F/guro 8. See Figure 8. • Lock the switchtdgger by placingthe diroctionof rotation selector in center position.See Figure 5. • • Open or close chuck jaws to a pointwhere the opening is slightlylarger than the bit size you intend to use. Also, raise the front of your ddll slightlyto keep the bit from falling out of the chuck • Loosenthe chuck jaws from drillbit. • To loosen: graspand hold the collar of the chuck with one hand, while rotatingchuck body with your other hand. Note; Rotate chuck body in the directionofthe arrow marked UNLOCK to loosen chuck jaws. Do not use a wrench to tightenor loosenthe chuckjaws. jaws. • Insert drill bit straight into chuck the full length of the jaws as shown in figure 8, • Tighten the chuck jaws on drill bit. • CHUCKBODY D_U. BIT • Lock the switchtriggerby placingthe directionof rotationselector in center position. See Figure 5. Remove ddUbitfrom chuckjaws. ADJUSTABLE TORQUE CLUTCH Your ddll is equipped with an adjustable torque clutch for drivingdifferent types of screws intodifferent materials. The proper settingdepends on the type of matedal and the size of screw you am using. TO ADJUST TORQUE • CHUCKJAWS • CHUCKCOLLAR RIGHT • • _k Fig. 8 Identify the twenty four torque indicator settings locatedon the front of your ddll. See F{gum 10. Rotate adjustingring to the desired setting. • 1-4 For driving small screws. 5- 8 To tighten the chuck jaws on ddll bit; grasp and hold the collar of the chuck with one hand, while rotatingthe chuck body with your other hand. Note: Rotate the chuck body in the directionof the arrow marked LOCK to tightenchuck jaws. Do not use a wrench to tighten or loosenthe chuck jaws. For driving screws intosoft material. • 9 - f2 • 13 - 16 For driving screwsinto soft and hard materials. For drivingscrews in hard wood. • 17 - 20 Fordrlving large screws. • 21 -
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 16 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Aug 14 18:04:26 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools