Craftsman 31522283A User Manual MOBILE BASE/CASTER SET Manuals And Guides L0310399
CRAFTSMAN Leg Sets Manual L0310399 CRAFTSMAN Leg Sets Owner's Manual, CRAFTSMAN Leg Sets installation guides
IRONFORCE IFN03000 L0310399
User Manual: Craftsman 31522283A 31522283A CRAFTSMAN MOBILE BASE/CASTER SET - Manuals and Guides View the owners manual for your CRAFTSMAN MOBILE BASE/CASTER SET #31522283A. Home:Tool Parts:Craftsman Parts:Craftsman MOBILE BASE/CASTER SET Manual
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
OPERATOR'S MANUAL
II:RRFTSMRN'I
MOBILE BASE WITH CASTER SET
fits most Craftsman Radial Arm and Table Saws Leg Stands
Model No.
315.22283A
f0rH0de1315248300
O
o
0
Save this manual for
future reference.
_1_ WARNING: To reduce the risk of injury,the
user must mad and understand the operator's
manual before using this product.
• RULES FOR SAFE OPERATION
• ASSEMBLY
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visil the Craftsman web page: www.sears.com/craftsman
983000-265
5-03
r The purpose of safety symbols is to attract your attention to possible dangem. The safety symbols, and the
explanations withthem, deserve yourcareful attention and understanding.The safety warningsdo not bythemselves
eliminate any danger. The instructions or warnings they give am not substitutes for prober a_dent prevention
measures,
SYMBOL
MEANING
DANGER: Indicates an imminentlyhazardous situation, which, if not avoided, will result in death or
sedous injury,
WARNING: Indicates a potentiallyhazardous situation, which, if not avoided, could resultin death or
serious injury.
A
CAUTION: Indicates a potentially hazardous situation,which, if not avoided, may result in minor or
moderateinjury. It may also be used to alert against uns_e practicesthef may cause propertydamage,
Important: Advises you of importantinformationor instructionsvital to the operationor maintenanceof
the equipment.
Note: Advisesyou ofadditional information senceming the operationor maintenanceofthe equipment.
A
WARNING: Read and understand all Instructions.
Failure to follow all instructionslisted below, may
resultin alectdc shock,fire andlor serious personal
injury.
SAVE THESE INSTRUCTIONS
i
Knowyour power tool, Read the operator's manualfor
your Table Saw or Radial Arm Saw carefully.Learn the
saw's applicationsand limitationsas well as the specific
potential hazards related to this tool.
•
Never use your sew while it Is suspendedon the swivel
caster. Always lower saw ontothe nonskidleveling feet
before operating,
• When moving,always pushthe leg stand, nat the saw.
• Think Safety. Safety is a combin=ion of operator
awareness, commonsense and alertness at all times.
•
Save these instructions.Refer to them frequently and
usethem to instructotherswho may use this tool, Ifyou
loansomeonethistool, loanthem these instructions
also.
Safety Instructions For Mobile Base,=
• Never installmobile bass with sew mounted to leg
stand.
• Be careful when moving to avoid any finger pinch
poir_s.
• Remove the dust bag before moving the tool or whan
placingthe leg stand on the mobile base.
• Place bass on a level surface and adjust levelingfeet
beforeplacing your sew in position.This shouldkeep
saw from rocking,while testing it for stability,
• Testfor stabilityin both the UP(on the caster) and the
down positions. Exercise caution when testingthe
stabilityof top heavy machines such as your saw.
• Never liftthe saw onto the leg stand without help.
• Unplug your sew before moving or rapositioningyour
tool.
• Always test your setup for stabilityand safety after
reposifioningand before pluggingthe saw intoan outlet.
• Care shouldbe taken when planningthe orientationof
yoursaw ontothe mobile base. Transfer of weight off of
the leveling feet to the caster will result in the saw tilting
lY2 in.toward the fixed wheels, When repositleningtop
heavy tools such as yoursaw, take advantage of the
center of gravity,and positionso that it will remain
stable while on caster.
_,
•
A
•
WARNING: Secure leg stand to mobile base before
movingthe tool. Failureto secure the leg stand could
cause the saw to fall resulting in sedous personal
injury.
Measure the leg stand from the leveling foot holesat
one side to the levelingfoot holeson the otherside.
This measurementis needed to determine whichholes
in the lower supportbracket and wheel supportbracket
are to be used when assemblingthe mobilebase, The
holes must align propodyfor the leg stand and mobile
base to be secured.
WARNING: Do nat engage or disengagethe
release lever while the supportbrace is stillattached
to the leg stand and never useyour handto operate
the release lever. Failure to heed this warning could
result in serious pemonal injury.
Unpack and identifyall componentsand hardware
beforeattemptingto assemble this unit.
The items included in this kit are:
• Large caster (1)
• Center support (2)
• Lower support bracket (2)
• Wheel support bracket (2)
• Caster bracket (1)
•
Release lever (1_
• Wheel (2)
•
Hex bolt, 1/4x 1 3/4(2)
•
Lack nut, 1/4- 20 (2)
MOSTTABLE
SAWS
• Large bolt, 3/8 x 4 1/2 (1)
•
Washer, 3/8 (1)
• Lock nut, 3/8 - 16 (1)
• Hex bolt, 1/4x 5/8 (24)
•
Hex nut, flanged, 1/4 - 20 (24)
•
Large hex bolt, 5/16 x 3/4 (10)
• Large hex nut, 5/16 - 18 (8)
• Washer, 5/16 (18)
• Leveling feet (2)
• Washer, 318 (4)
•
Nut, 3/8- 16 (4)
•
Lock nut, 5/15 - 18 (2)
CENTER
SUPPORT
MOSTRADIAL
ARMSAWS
wHEEL
SUPPORTBRACKEt
RELEASE
LEVER
WHEEL _..
SUPPORT
BRACKET
CENrEF
BRACKET //_
LEVELING
FEET
WHF._
Fig. 1
3
CENTERSUPPORT
ASSEMBLY INSTRUCTIONS
HEXBOLT
To assemble first side (side with two wheels):
Remove wheels, hex bolts, and lock nutsfrom the bag.
Place whsel in slot of the wheel supportbracket and
inserthex bolt through boththe bracket and the wheel.
• Secure withthe lock nut andtighten,
• Place center support (withoutthe slot) upside down on
a flat surface.Align the wheel supportbracketswith the
holes previouslydetermined to fit the saw, Using the
small hex bolts and hex nuts from the hardware bag,
place hex boltsthrough the holes of boththe wheel
supportbracket and the center support.
• Tighten usingflex nuts.
Note: Repeat above steps for other side.
To assemble remainingside (side with two levelingfeet
and caster):
• Mount castarts the cestar bracket using large hex
bolts. Secure using lock nuts.
• Attach levelingfeet to lower supportbracket using hex
nuts and washers as shown in figure 3. Levelingfeet
musttouchthe floor when the caster is in the raised
position.
• Secure bracket to undersideof center supportusing the
remaining large hex bolts and hex nuts.
• Place center support(with slot and attached caster)
upside down on a flat surface.Align the lower support
brackets with the holes previouslydeterminedto fit the
saw. Using the small hex bolts and hex nutsfrom the
hardware bag, place hex bolts throughthe holesof
boththe lowersupport bracket and the center support.
• Tightenusing hex nuts.
• Turn assembly uprightonto levelingfeet.
• Insertrelease lever into slot. Using the large bolt,
washer, and lock nut, secure release lever. "13ghten.
• If saw is mounted to a leg stand, remove the saw from
the leg stand before installingthe mobilebase.
• Remove levelingfeet from leg stand. Secure the mobile
base to the leg stand usingthe large hex boltand large
hex nut.
• Mount the saw and remove supportbrace from the leg
stand (the supportabove the release lever). Do not
discardthe supportbrace and hardware. In the event
the sew is ever removedfrom the mobile base the
supportbrace must be installed.
HFJ{NUT,
•
•
FI.ANGED_
HEX BOLT
8UPPO_BRACKET
WHEEL
L_KN_
"_CKN_
WHEEL
Fig. 2
LARGEBOLT
RELEASE_
SLOT
HE)(NUT
LEVEUNG FEET
Fig. 3
TO
3_k WARNING: Obtain help when liftingthe saw to
place on the leg stand. Once the saw is mounted,
remove the supportbrace from the leg stand (the
supportabove the release lever). Failure to remove
the supportbrace, could result in injury.
TO
TO RAISE WHEEL:
Step down firmly on release lever.
TO LOWER WHEEL:
Place foot under the release lever and lift up.
Note: Never use your hand to raise or lower the wheel.
Fig, 4
4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 4 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Apr 03 10:00:15 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools