Craftsman 315235360 User Manual ACCESSORIES FOR COMPOUND MITER SAW Manuals And Guides 98110088
CRAFTSMAN Miter Saw Manual 98110088 CRAFTSMAN Miter Saw Owner's Manual, CRAFTSMAN Miter Saw installation guides
User Manual: Craftsman 315235360 315235360 CRAFTSMAN ACCESSORIES FOR COMPOUND MITER SAW - Manuals and Guides View the owners manual for your CRAFTSMAN ACCESSORIES FOR COMPOUND MITER SAW #315235360. Home:Tool Parts:Craftsman Parts:Craftsman ACCESSORIES FOR COMPOUND MITER SAW Manual
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Owner's Manual CRIIFTSMFIW AccESSORIES FOR THE 10 in. (254 mm) COMPOUND MITER SAW Model No. 315.235360 Item No. _923537 (accessories optional) _923536 (accessories included) Save this manual for future reference. CAUTION: Read and followall Safety Rules and Operating Instructionsbefore first use of this product. Sears, Roebuck 972000-485 1-98 and Co., Hoffman Estates, IL 60179 • SAFETY • LOOSE PARTS • INSTALLATION • SERVICES USA READ ALL INSTRUCTIONS ...... • - I READ THESE INSTRUCTIONS AND THE INS_ 315;235360 COM. _PQI.LND MLT.EB.._.A.__TJ:!_ROUGHLY before using accessories._ • • ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses. • ALWAYS DISCONNECT SAW FROM POWER SUPPLY BEFORE MAKING ADJUSTMENTS OR ADDING ACCESSORIES. Make sure the switch is off when reconnecting to power supply. • SAVE THESE INSTRUCTIONS. Refer to them frequently and use to instruct other users, if you loan someone this tool, loan them these instructions also. L," .:_::!_ _, KNOW YOUR POWER TOQL Read the owner's m_n_r f0P the (3ompo-u-h_'MiterSaw carefully. • Lear_-tht_w_ and i'mitations as we.!! as.thesp._otential this tool. hazards related to KEEP THE WORK AREA CLEAN. Cluttered work areas and work benches invite accidents. DO NOT leave tools or pieces of wood on the saw while it is in operation. _k Look for this symbol to point out important means attention!!! Your safety is involved. safety precautions. It The following accessories are included with item no. _23536. They are optional and may also be purchased for use with item no. 92.3537: • Work Clamp (item no. _'23461) • Stop Block (Included with Table Extensions) • 8 mm Work Clamp Screw (Included with • Table Extensions (2) (Item no. _23464) Work Clamp) • Large Wing Screws(2) (Included with Table Extensions) • Small Wing Screw (Included with Table Extensions) • Dust Bag (Item no. 9-23466) • Owner's Manual WORKCLAMP _8mm WORKCLAMPSCREW SMALLWINGSCREW LARGEWINGSCREWS Fig, 1 _ WARNING: The use of attachments or accessories not listed might be hazardous. 2 A WARNING: To prevent accidental starting that could cause possible serious personal injury, assemble all parts to your saw completely before connecting it to power supply• Saw should never be connected to power supply when you are assembling parts, making adjustments, installing or removing blades or accessodas, or when not in use. WORK CLAMP See Figure 2. The work clamp (Item no. 92.3461) provides greater control by clamping the workpiece to the fence. It also prevents the workpiece from creeping toward the saw blade. This is very helpful when cutting compound miters. To install the work clamp, place the shaft of the clamp in either hole in front of the miter table base. Thread the 8 mm work clamp screw provided into the side of the base and tighten it to secure the clamp in position. Rotate the knob on the clamp to move it in or out as needed. _IL WARNING: Make sure the saw blade or blade guard will not hit the work clamp assembly when cutting 35 ° to 45 ° angles. Failure to heed this warning can result in serious personal injury. EXHAUSTPORT Fig. 3 TABLE EXTENSIONS See Figure 4. To install the table extensions (Item no. _23464), insert the ends of the extensions into the holes in the sides of the base. Adjust the extensions to the desired length. To secure them in place, screw the two large wing screws provided into the holes in the front of the base and tighten them securely. tVORK CLAMP 8 mm WORK CLAMP SCREW Fig. 2 ° DUST BAG See Figure 3. - : The dust bag (Item no. 923466) fits over the exhaust port on the upper blade guard. To install it, remove the dust guide from the exhaust port. Then, squeeze the two metal clips to open the mouth of the bag and slide it on the exhaust port. Release the clips. The metal ring in the bag should lock in between the grooves on the exhaust port. For more efficient operation, empty dust bag when no more than half • _ This will permit better air flow through the bag. STOPBLOCK SMALL WIN4 ; SCREW TABLEEXTENSION Fig. 4 STOP BLOCK See Figures 4 and 5. The stop block is useful as a stop for cutting multiple pieces to the same length. It can be installed on either table extension on either side of the saw base: • Slide the stop block on the back arm of either table extension, then insert the table extension into the saw base. See Figure 4. • Use the large wing screws to secure the table extensions to the saw base and the small wing screw to secure the stop block to the table extension. See Figure 4. • Loosen the small wing screw and adjust the stop block the desired distance from the blade for the cut to be made. • Tighten small wing_screw securely. • Make a test cut in scrap material and measure the length of the workpiece. • Make any necessary adjustments. STOP BLOCK Fig. 5 _1= WARNING: When using the work clamp with the stop block, install the clamp on the stop block side of the blade. This will eliminate the possibility of the saw catching the loose end and kicking up. Failure to heed this warning can result in serious personal injury. For the location of a Forthe repair or replacementparts youneed delivereddirectly to yourhome Call7 am - 7 pm, 7 days a week SearsPads andRepairCenter in yourarea Call24 hours a day, 7 days a week 1-8OO-366-PART 1-8OO-488-1222 (1-800-366-7278) For repairservice Call 24 hours a day, 7 days a week Whenrequestingserviceor orderingparts, alwaysprovidethe followinginformation: 1-800-4-REPAIR • ProductName _(!-800-473-7247) 10 inch Compound Miter Saw SEARS America's • Part Name Repair Specialists 4 • Model Number 315.235360 • Part Number
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 4 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Apr 02 10:33:54 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools