Craftsman 351214600 User Manual BAND SAW Manuals And Guides L0411302
CRAFTSMAN Saw Band Manual L0411302 CRAFTSMAN Saw Band Owner's Manual, CRAFTSMAN Saw Band installation guides
User Manual: Craftsman 351214600 351214600 CRAFTSMAN BAND SAW - Manuals and Guides View the owners manual for your CRAFTSMAN BAND SAW #351214600. Home:Tool Parts:Craftsman Parts:Craftsman BAND SAW Manual
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
UNPACKING • Connect each leg set by attachingthe two short uppercross braces (B) and the two short lower cross braces (D) (see Figure 3). • Check for completeness. Locate all parts before attempting assembly (see Figure 1). NOTE: Hardware to mount toolsto stand is not included. CAUTION: Do not attempt assembly if parts are missing. Follow assembly instructions.Use parts list to order replacement parts. A Long Upper Cross Brace (2 each) B Short Upper Cress Brace (2 each) C Long Lower Cross Brace (2 each) D Short Lower Cross Braco (2 each) E Leg (4 each) F Top (2 each) Hardware Bag (not shown) D Figure 3 - Connect Leg Sets • Tighten all fastanem completely. ASSEMBLE LEVEUNG FOOTPAD • Insert pad onto countominkscrew (see Figure4). • • Thread nut onto screw.Insert screw intoand throughfootpad. Place washer on screw.Thread second nutonto screw. Nut Screw Pad Figure 1 - Unpacldng ASSEMBLY Nut / Tools required: Phillipsscrewdriver, adjustable wrench and portable drill. Washer _Footpad Figure 4 - Assemble Leveling Footpad ASSEMBLE FRAME NOTE: Finger_ghten fastanem un_lall metal componentsare assembled. Then tighten all fastoners securely. NOTE: Use pan head screws and lock nuts. (Figure 7, Key Nos. 8 and 9) to assemble all components except the top and leveling pad. • Assemble a long upper cress brace (A) and a long lower cross brace (C) to the _ legs (E}.The braces areassembled to the INSIDE of the legs (see Figure 2), • _ ATTACH • FOOTPADS Slide one footpadonto the bottom of each leg. (One footpad will include leveling device).Align corner of footpadto corner of leg and pressfootpad onto leg. ASSEMBLE • TOP Locationof pre-drilled holes used in attachingthe top to the frame are indicated in Figure 5. Repeat for the other two legs and long cress braces. 13" A E E 1%" Figure 5 -Top Hole Pattern Figure 2 - Assemble Leg Set 1" 25/_6 " 1%" • Place theboards together andthenplace the assembled frame on the boards, Attach flame to boards usingwood screws and washers throughthe slots in the frame (see Rgum 6), NOTE: The center screw requires one washer under the screw head and one additional washer between the frame and board. IMPORTANT: For scroll saw 22436, the two rear and one of the front mounting belts will need to be located through the slots in the frame. Carefully ddll the two holes shown in Figure 7 and then place saw on stand, mark Ioca_on of the other two holes, then drill holes. Center Screw Requires Extra Washer Between Tabletop and Frame _ 2_/=" "/,e" \ Figure 7 - Drill Mounting Holes for Scroll Saw Figure 6 - Attaching the Top 3 4 ._p_-12 Figure 8 - Parts Illustration for Stand KEY NO. 1 2 3 4 5 6 7 8 A PART NO. DESCRIPTION 117020231 117020232 117020234 117020235 117020233 116 620 267 117900073 116710117 Long Upper Crces Brace Short Upper Cross Brace Long Lower Cross Brace Short Lower Cross Brace Not Shown Leg Footpad Tabletop Pan Head Screw (M6xl0) QTY. KEY NO. 2 2 2 2 4 4 2 24 9 10 11 12 13 14 15 A PART NO. DESCRIPTION 116 710 020 116 710 003 116700021 116 620 268 116 700 027 116 700 089 116 720 077 119 900 873 Nut, Self-loddng (M6) Countersink Screw (M8x40) Nut (M8) Pad Washer (8.4) QTY. I 24 1 2 1 I 1 Pan Head Wood Screw (M6x16) ! 10 Washer (6.4) 12 Hardware Bag 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 2 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Fri Apr 20 15:27:26 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools