Craftsman 486243223 User Manual SPREADER Manuals And Guides L0803261

CRAFTSMAN Spreader Manual L0803261 CRAFTSMAN Spreader Owner's Manual, CRAFTSMAN Spreader installation guides

User Manual: Craftsman 486243223 486243223 CRAFTSMAN SPREADER - Manuals and Guides View the owners manual for your CRAFTSMAN SPREADER #486243223. Home:Farm Equipment Parts:Craftsman Parts:Craftsman SPREADER Manual

Open the PDF directly: View PDF .
Page Count: 12

Owner's Manual

CAST SPREAD

Model No. 486.243223 DO NOT RETURN TO STORE

For Missing Parts or Assembly

Questions Call 1-866-576-8388

CAUTION:

Before using this product,

read this manual and follow

all Safety Rules and

Operating Instructions.

,, Safety

,, Assembly

,, Operation

,, Maintenance

,, Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com/craftsman

FORM NO. 40986 (12/03/07)

SAFETY RULES .......................................................... 2

HARDWARE PACKAGE CONTENTS ......................... 3

CARTON CONTENTS ................................................. 3

ASSEMBLY ............................................................... 4-6

OPERATION ................................................................ 7

MAINTENANCE .......................................................... 8

STORAGE ................................................................... 8

NOTES ................................................................... 9-10

REPAIR PARTS ....................................................... 11

PARTS ORDERING/SERVICE ..................... Back Page

LIMITED ONE YEAR WARRANTY ON CRAFTSMAN SPREADER

For one year from the date of purchase, when this spreader is maintained and lubricated according to the operating

and maintenance instructions in the owner's manual, Sears will repair any defect in material or workmanship free of

charge. If this spreader is used for commercial or rental purposes, this warranty applies for only 90 days from the date of

purchase.

This warranty does not cover repairs necessary because of operator negligence or abuse, including the failure to maintain

the equipment according to instructions contained in the owner's manual.

WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT

IN THE UNITED STATES.

This warranty applies only while this product is in the United States.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co. D/817 WA. Hoffman Estates, Chicago, IL 60179

The model number and serial numbers will be found on a

decal attached to the spreader.

You should record both the serial number and the date of

purchase and keep in a safe place for future reference.

MODEL NUMBER:

SERIAL NUMBER:

DATE OF PURCHASE:

486.243223

Read the towing vehicle owners manual and towing

vehicle safety rules. Know how to operate your tractor

before using the broadcast spreader attachment.

Read the chemical label instructions and cautions for

handling and applying the chemicals purchased for

spreading.

Wear eye and hand protection when handling and

when applying lawn or garden chemicals.

Never operate tractor and spreader attachment

without wearing substantial footwear, and do not allow

anyone to ride or sit on spreader attachment frame.

Never allow children to operate the tractor or spreader

attachment, and do not allow adults to operate without

proper instructions.

Always begin with the transmission in first (low) gear

and with the engine at low speed, and gradually

increase speed as conditions permit. Maximum towing

speed -6 M.RH.

When towing broadcast spreader do not drive too

close to a creek or ditch and be alert for holes and

other hazards which could cause you to loose control

of the broadcast spreader and tractor.

Before operating vehicle on any grade (hill) refer to

the safety rules in the vehicle owner's manual con-

cerning safe operation on slopes. Stay off steep

slopes!

Follow maintenance and lubrication instructions as

outlined in this manual.

Look for this symbol to point out important safety precautions. It means J Attention!! Become alert!! Your safety

is involved.

/ j

/J" K

j.J

REF. QTY. DESCRIPTION

A 2 Hex Bolt, 1/4" x 1-1/2"

B 4 Hex Bolt, 1/4" x 1-3/4"

C 4 Hex Bolt, 1/4" x 2"

D 8 Nut, 1/4"

E 1 Hair Cotter Pin, 1/8"

F 3 Plastic Cap

REF. QTY. DESCRIPTION

G 1 Agitator Hairpin

H 2 Washer, 1/4"

I 2 Hex Flange Bearing

J 2 Spacer

K 2 Hub Cap

L 1 Hitch Pin

CARTON CONTENTS

1. Hopper

2. Control Cable

3. Frame Tube

4. Impeller Assembly

5. Hitch Tube, R.H. (Right Hand)

6. Hitch Tube, L.H. (Left Hand)

7. Hitch Control Tube

8. Hitch Brackets (2)

9. Drive WHeel

10. Wheel

TOOLS REQUIRED FOR ASSEMBLY

(2) 7/16" Wrenches

REMOVAL OF PARTS FROM CARTON

• Remove all parts and hardware packages from the

carton. Lay out all parts and hardware and identify

using the illustrations on page 3.

• Insert the two hex flange bearings (I) into the frame

tube. See figure 1.

• Attach the hopper to the frame tube using two 1/4" x

1-1/2" hex bolts (A), 1/4" washers (H), and 1/4" nylock

nuts (D) as shown in figure 3. Tighten.

• Insert the agitator hairpin (G) into the hole at the top

of the impeller. See figure 3.

..... A

÷H

FIGURE 3

FIGURE 1

• Insert each side of the axle of the impeller assembly

into the frame tube. See figure 2.

Attach the drive wheel (9) to the right (indented) side

of the axle. Secure the wheel in place with a hub cap

(K). See figure 4.

FIGURE 4

FIGURE 2

Attach the wheel (10) to the left side of the axle.

Secure the wheel in place with a hub cap (K). See

figure 5.

Attach the (RH) and (LH) hitch tubes to the frame tube

using four 1/4" x 2" hexbolts (C) and 1/4" nylock nuts

(D). Tighten. See figure 7.

FIGURE 5

FIGURE 7

Assemble the (RH) and (LH) hitch tubes to the control

tube using two 1/4" x 1-3/4" hex bolts (B) and 1/4"

nylock nuts (D). Tighten. See figure 6.

Assemble the plastic caps onto the ends of the hitch

tubes and control tube as shown in figure 6.

..... F

Assemble the Control Cable to the Hitch Control Tube

using the carriage bolt and nylon wing nut. Tighten.

See figure 8.

FIGURE 8

FIGURE 6

AssembletheHitchBracketstotheHitchControlTube

usingtwo1/4"x 1-3/4"hexbolts(B)and1/4"nuts(D).

Tighten.Seefigure3.

Assemblethehitchpin(L)throughthehitchbrackets

andsecurewiththe1/8"haircotterpin(E).Seefigure

10.

FIGURE9

\\vJ

FIGURE 10

KNOW YOUR SPREADER USING YOUR SPREADER

Read this owner's manual and safety rules before

operating your Spreader.

Compare the illustration below with your Spreader to

familiarize yourself with the various controls and their

locations.

FLOW CONTROL LEVER

ADJUSTABLE STOP

'\\\

FIGURE 11

FLOW CONTROL LEVER Opens and closes the flow

plate on the bottom of the hopper.

ADJUSTABLE STOP Allows the flow control lever to be

moved to the same setting repeatedly.

HOW TO USE YOUR SPREADER

ADJUSTING THE FLOW RATE SETTING

• Loosen the wing nut that fastens the control to the

handle.

• Slide the Adjustable stop to the desired setting and

retighten the wing nut. See figure 11.

Check the material package and the Spreader

Settings sheet included with your spreader for the

proper spreader setting and application rate.

Before filling spreader, move the control lever to the

"OFF" position.

Move spreader onto a flat surface - either a walk or a

driveway - and fill.

Slide the Adjustable Stop to the desired setting.

Start the spreader in motion, then move the control

lever forward against the adjustable stop to begin

spreading.

NOTE: Always place control lever in the "OFF" position

while filling spreader and when stopping or turning, to

prevent release of excess fertilizer.

APPLICATION TiPS

• This unit will cover a 4 to 8 foot wide area depending

on the material used and the towing speed.

• To avoid misses or striping, make each pass about

5 feet from the previous one so some overlapping of

spread pattern does occur.

• For easiest application, spread across the shortest

edges of lawn first, making two "header" strips for a

turning area, and then spreading between the header

strips. See figure 12.

• If lawn is odd shaped, spread a border around the

edges and then spread between the border. See

figure 12.

• Keep wheel approximately 4 feet from any area you

do not wish to spread.

iMPORTANT: Be careful when using spreader around

ornamental plants because weed control chemicals can

damage these plants.

"--=i J

FIGURE 12

CUSTOMER RESPONSiBiLiTiES

•Read and follow the maintenance schedule and the maintenance procedures listed in this section.

Fill in dates as you _,___,_/"

complete regular service.

Check for loose fasteners X

Clean X X

Lubrication X

Service Dates

CHECKFORLOOSEFASTENERS

•Make a thorough visual check of the Spreader for any

bolts and nuts which may have loosened. Retighten

any loose bolts and nuts.

LUBRICATION

Apply a few drops of oil to all moving parts.

CLEANING

Always empty spreader after each use, storing

leftover material in it's original bag.

Wash the spreader and dry thoroughly after each use.

STORAGE

Empty and clean the hopper as instructed in

maintenance section.

Store in a clean, dry area.

REPAIR PARTS FOR MODEL 486.243223

i 25 /'

..... 25

REF

PART NO

47994BLK

49085

49087

49088

49091

43648

1509-69

47189

43088

45165

47141

47983

49820

46503

QTY DESCRIPTION

1 Hopper

1 Frame Tube

1 Hitch Tube (LH)

1 Hitch Tube (RH)

1 Hitch Control Tube

2 Hex Bolt, 1/4-20 x 1-1/2"

4 Hex Bolt, 1/4-20 x 1-3/4"

10 Nylock Nut, 1/4-20

2 Washer, 1/4 Std

1 Carriage Bolt 1/4-20 x 2"

1 Nylon Wing Nut 1/4-20

1 Flow Slide

1 Control Cable Asembly

(includes items 10 & 11)

1 Wheel

REF PART NO

15 48865

16 44663

17 40903

18 47851

19 40904

20 47124

21 47963

22 24446

23 47623

24 46699

25 44481

26 48934

27 43343

28 43501

40986

QTY DESCRIPTION

1 Drive Wheel

2 Hub Cap (Push Nut)

1 Axle

2 Spacer

1 Gearbox

1 Impeller

2 Hex Flange Bearing

2 Hitch Bracket

1 Hitch Pin

4 Hex Bolt, 1/4-20 x 2"

3 Vinyl Cap

1 Hairpin, Agitator

1 Hairpin, Cotter

1 Cotter Pin, 9/64 x 1-1/2"

1 Owners Manual

Your Home

For repair - in your home - of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME ® (1-800-469-4663)

Call anytime, day or night (U.S.A. and Canada)

www.sears.com www.sears.ca

For expert home solutions advice: www.managemyhome.com

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call or go on-line for the location of your nearest

Sears Parts & Repair Service Center

1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)

Call anytime, day or night

www.sears.com www.sears.ca

To purchase aprotection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparacidn Au Canada pour service en fran(_ais:

a domicilio, y para ordenar piezas: 1-800-LE-FOYER Mc

1-888-SU-HOGAR ® (1-800-533-6937)

(1-888-784-6427) www.sears.ca

® Registered Trademark /T_,TTrademark /Service Mark of Sears Brands, LLC

TM SM

® Marca Registrada /Marca de Fabrica /' Marca de Servicio de Sears Brands, LLC

MCMarque de commerce /Marque d_pos_e de Sears Brands, LLC ® Sears Brands, LLC

Craftsman 486243223 User Manual SPREADER Manuals And Guides L0803261

CRAFTSMAN Spreader Manual L0803261 CRAFTSMAN Spreader Owner's Manual, CRAFTSMAN Spreader installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation