Craftsman 486243223 User Manual SPREADER Manuals And Guides L0803261

CRAFTSMAN Spreader Manual L0803261 CRAFTSMAN Spreader Owner's Manual, CRAFTSMAN Spreader installation guides

User Manual: Craftsman 486243223 486243223 CRAFTSMAN SPREADER - Manuals and Guides View the owners manual for your CRAFTSMAN SPREADER #486243223. Home:Farm Equipment Parts:Craftsman Parts:Craftsman SPREADER Manual

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

Owner's Manual
®

CAST SPREAD
DO NOT RETURN

Model No. 486.243223

For Missing Parts or Assembly
Questions Call 1-866-576-8388

CAUTION:

,,
,,
,,
,,
,,

Before using this product,
read this manual and follow
all Safety Rules and
Operating Instructions.

Sears,

Roebuck and Co., Hoffman

TO STORE

Estates,

Safety
Assembly
Operation
Maintenance
Parts

IL 60179 U.S.A.

www.sears.com/craftsman
FORM

NO. 40986

(12/03/07)

SAFETY RULES ..........................................................
2
HARDWARE PACKAGE CONTENTS ......................... 3
CARTON CONTENTS .................................................
3
ASSEMBLY ...............................................................
4-6
OPERATION ................................................................
7

LIMITED ONE YEAR WARRANTY

MAINTENANCE ..........................................................
8
STORAGE ...................................................................
8
NOTES ...................................................................
9-10
REPAIR PARTS .......................................................
11
PARTS ORDERING/SERVICE ..................... Back Page

ON CRAFTSMAN

SPREADER

For one year from the date of purchase, when this spreader is maintained and lubricated according to the operating
and maintenance instructions in the owner's manual, Sears will repair any defect in material or workmanship free of
charge. If this spreader is used for commercial or rental purposes, this warranty applies for only 90 days from the date of
purchase.
This warranty does not cover repairs necessary because of operator negligence or abuse, including the failure to maintain
the equipment according to instructions contained in the owner's manual.
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT
IN THE UNITED STATES.
This warranty applies only while this product is in the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co. D/817 WA. Hoffman Estates, Chicago, IL 60179

The model number and serial numbers will be found on a
decal attached to the spreader.
You should record both the serial number and the date of
purchase and keep in a safe place for future reference.

Read the towing vehicle owners manual and towing
vehicle safety rules. Know how to operate your tractor
before using the broadcast spreader attachment.
Read the chemical label instructions and cautions for
handling and applying the chemicals purchased for
spreading.
Wear eye and hand protection when handling and
when applying lawn or garden chemicals.
Never operate tractor and spreader attachment
without wearing substantial footwear, and do not allow
anyone to ride or sit on spreader attachment frame.
Never allow children to operate the tractor or spreader
attachment, and do not allow adults to operate without
proper instructions.

MODEL NUMBER:

486.243223

SERIAL NUMBER:
DATE OF PURCHASE:

Always begin with the transmission in first (low) gear
and with the engine at low speed, and gradually
increase speed as conditions permit. Maximum towing
speed - 6 M.RH.
When towing broadcast spreader do not drive too
close to a creek or ditch and be alert for holes and
other hazards which could cause you to loose control
of the broadcast spreader and tractor.
Before operating vehicle on any grade (hill) refer to
the safety rules in the vehicle owner's manual concerning safe operation on slopes. Stay off steep
slopes!
Follow maintenance and lubrication instructions as
outlined in this manual.

Look for this symbol to point out important safety precautions. It means J Attention!!
is involved.

Become alert!! Your safety

J
/ j

L
/J"

K
j.J

REF.

QTY.

A
B
C
D
E
F

2
4
4
8
1
3

DESCRIPTION
Hex Bolt, 1/4" x
Hex Bolt, 1/4" x
Hex Bolt, 1/4" x
Nut, 1/4"
Hair Cotter Pin,
Plastic Cap

1-1/2"
1-3/4"
2"
1/8"

REF.

QTY.

G
H
I
J
K
L

1
2
2
2
2
1

DESCRIPTION
Agitator Hairpin
Washer, 1/4"
Hex Flange Bearing
Spacer
Hub Cap
Hitch Pin

3
4
/

CARTON

CONTENTS

1. Hopper
2. Control Cable
3. Frame Tube

4.
5.
6.
7.

Impeller Assembly
Hitch Tube, R.H. (Right Hand)
Hitch Tube, L.H. (Left Hand)
Hitch Control Tube
3

8. Hitch Brackets (2)
9. Drive WHeel
10. Wheel

TOOLS

REQUIRED

FOR ASSEMBLY

•

(2) 7/16" Wrenches
•

REMOVAL
•

OF PARTS FROM CARTON

Attach the hopper to the frame tube using two 1/4" x
1-1/2" hex bolts (A), 1/4" washers (H), and 1/4" nylock
nuts (D) as shown in figure 3. Tighten.
Insert the agitator hairpin (G) into the hole at the top
of the impeller. See figure 3.

Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on page 3.

G
H

•

Insert the two hex flange bearings (I) into the frame
tube. See figure 1.

.....

FIGURE 3

FIGURE 1

•

Attach the drive wheel (9) to the right (indented) side
of the axle. Secure the wheel in place with a hub cap
(K). See figure 4.

Insert each side of the axle of the impeller assembly
into the frame tube. See figure 2.

K
FIGURE 4
FIGURE

2
4

Attach the wheel (10) to the left side of the axle.
Secure the wheel in place with a hub cap (K). See
figure 5.

Attach the (RH) and (LH) hitch tubes to the frame tube
using four 1/4" x 2" hexbolts (C) and 1/4" nylock nuts
(D). Tighten. See figure 7.

K
FIGURE 5

FIGURE 7

Assemble the (RH) and (LH) hitch tubes to the control
tube using two 1/4" x 1-3/4" hex bolts (B) and 1/4"
nylock nuts (D). Tighten. See figure 6.
Assemble the plastic caps onto the ends of the hitch
tubes and control tube as shown in figure 6.

Assemble the Control Cable to the Hitch Control Tube
using the carriage bolt and nylon wing nut. Tighten.
See figure 8.

F
..... F

FIGURE 8
FIGURE 6

Assemble
theHitchBracketstothe HitchControlTube
usingtwo1/4"x 1-3/4"hexbolts(B)and1/4"nuts(D).
Tighten.Seefigure3.

Assemblethehitchpin(L)throughthehitchbrackets
andsecurewiththe1/8"haircotterpin(E).Seefigure
10.

®
\\
\\vJ

D
FIGURE9

FIGURE 10

KNOW YOUR SPREADER
Read this
operating
Compare
familiarize
locations.

FLOW

CONTROL

SPREADER

Check the material package and the Spreader
Settings sheet included with your spreader for the
proper spreader setting and application rate.
Before filling spreader, move the control lever to the
"OFF" position.
Move spreader onto a flat surface - either a walk or a
driveway - and fill.
Slide the Adjustable Stop to the desired setting.
Start the spreader in motion, then move the control
lever forward against the adjustable stop to begin
spreading.

owner's manual and safety rules before
your Spreader.
the illustration below with your Spreader to
yourself with the various controls and their

ADJUSTABLE

LEVER
STOP

NOTE: Always place control lever in the "OFF" position
while filling spreader and when stopping or turning, to
prevent release of excess fertilizer.

'\
\

USING YOUR

APPLICATION
•
•

•

FIGURE 11

•
FLOW CONTROL LEVER Opens and closes the flow
plate on the bottom of the hopper.
ADJUSTABLE

STOP Allows the flow control lever to be

moved to the same setting repeatedly.

•

TiPS

This unit will cover a 4 to 8 foot wide area depending
on the material used and the towing speed.
To avoid misses or striping, make each pass about
5 feet from the previous one so some overlapping of
spread pattern does occur.
For easiest application, spread across the shortest
edges of lawn first, making two "header" strips for a
turning area, and then spreading between the header
strips. See figure 12.
If lawn is odd shaped, spread a border around the
edges and then spread between the border. See
figure 12.
Keep wheel approximately 4 feet from any area you
do not wish to spread.

iMPORTANT: Be careful when using spreader around
ornamental plants because weed control chemicals can
damage these plants.
f

HOW TO USE YOUR

SPREADER

ADJUSTING THE FLOW RATE SETTING
• Loosen the wing nut that fastens the control to the
handle.
• Slide the Adjustable stop to the desired setting and
retighten the wing nut. See figure 11.
"--=i

FIGURE 12

CUSTOMER
•

RESPONSiBiLiTiES

Read and follow the maintenance schedule and the maintenance procedures listed in this section.

Fill in datesregular
as youservice.
complete

Check for loose fasteners
Clean
Lubrication

Service Dates

_,___,_/"

X
X

CHECKFORLOOSEFASTENERS
•

Make a thorough visual check of the Spreader for any
bolts and nuts which may have loosened. Retighten
any loose bolts and nuts.

CLEANING
Always empty spreader after each use, storing
leftover material in it's original bag.
Wash the spreader and dry thoroughly after each use.

LUBRICATION
Apply a few drops of oil to all moving parts.

STORAGE
Empty and clean the hopper as instructed in
maintenance section.
Store in a clean, dry area.

REPAIR PARTS FOR MODEL 486.243223
6

13
14
i

/'
/

2
t

5
.....

11
15

21
23

/
22
/

22
17

REF
1
2
3
4
5
6
7
8
9
10
11
12
13

PART NO
47994BLK
49085
49087
49088
49091
43648
1509-69
47189
43088
45165
47141
47983
49820

QTY

46503

DESCRIPTION

1
1

Hopper
Frame Tube

1
1
1

Hitch Tube (LH)
Hitch Tube (RH)
Hitch Control Tube

2
4
10
2
1
1
1

Hex Bolt, 1/4-20 x 1-1/2"
Hex Bolt, 1/4-20 x 1-3/4"
Nylock Nut, 1/4-20
Washer, 1/4 Std
Carriage Bolt 1/4-20 x 2"
Nylon Wing Nut 1/4-20
Flow Slide

Control Cable Asembly
(includes items 10 & 11)
Wheel

REF
15
16
17
18
19
20
21
22
23
24
25
26
27
28

PART NO
48865
44663
40903
47851
40904
47124
47963
24446
47623
46699
44481
48934
43343
43501
40986

QTY
1

DESCRIPTION
Drive Wheel

2
1

Hub Cap (Push Nut)
Axle

2
1

Spacer
Gearbox

1
2
2
1

Impeller
Hex Flange Bearing
Hitch Bracket
Hitch Pin

Hex Bolt, 1/4-20 x 2"

3
1
1
1
1

Vinyl Cap
Hairpin, Agitator
Hairpin, Cotter
Cotter Pin, 9/64 x 1-1/2"
Owners Manual

Your Home
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.

1-800-4-MY-HOME
Call anytime,

® (1-800-469-4663)

day or night (U.S.A. and Canada)

www.sears.com

For expert home solutions

www.sears.ca

advice: www.managemyhome.com

Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Service

1-800-488-1222

(U.S.A.)

1-800-469-4663

Call anytime,

1-800-827-6655
Para pedir servicio
a domicilio,

www.sears.ca

agreement on a product serviced by Sears:

(U.S.A.)

de reparacidn

y para ordenar

1-888-SU-HOGAR

1-800-361-6665

(Canada)

Au Canada pour service

en fran(_ais:

1-800-LE-FOYER Mc
(1-800-533-6937)

piezas:

(1-888-784-6427)

® Registered

Trademark

/ T_,TTrademark

(Canada)

day or night

www.sears.com

To purchase a protection

Center

www.sears.ca

Service

Mark of Sears

® Marca Registrada
/ TM Marca de Fabrica
/ SM' Marca de Servicio
MC Marque de commerce / MD Marque d_pos_e de Sears Brands,

Brands,

de Sears
LLC

LLC
Brands,

LLC

® Sears Brands, LLC

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 12
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Mon Jul 21 00:25:40 2008
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Craftsman 486243223 User Manual SPREADER Manuals And Guides L0803261

CRAFTSMAN Spreader Manual L0803261 CRAFTSMAN Spreader Owner's Manual, CRAFTSMAN Spreader installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation