Craftsman 610243551 User Manual DUMP CART Manuals And Guides L0304243
CRAFTSMAN Cart/Dump Cart Attachment Manual L0304243 CRAFTSMAN Cart/Dump Cart Attachment Owner's Manual, CRAFTSMAN Cart/Dump Cart Attachment installation guides
User Manual: Craftsman 610243551 610243551 CRAFTSMAN DUMP CART - Manuals and Guides View the owners manual for your CRAFTSMAN DUMP CART #610243551. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman DUMP CART Manual
Open the PDF directly: View PDF .
Page Count: 12
Download | ![]() |
Open PDF In Browser | View PDF |
Operators Manual If there are any missing parts please call 1-800-652-2321. 12 Cu. Ft, Heaped 1,000-Pound Capacity Removable Tail Gate All fasteners EASY DUMP CART Any questions on assembly, missing parts, operation, maintenance or safety, please call the above toll free number. Model No. 610.243551 are readily available hardware store. • • • • • CAUTION: Before using this product, read this Manual and follow all it's Safety Rules and Operating Instructions. Sears, Roebuck Visit our Craftsman and Co., Hoffman website: Estates, through any Safety Assembly Operation Maintenance Parts IL 60179 U.S.A. www.sears.com/craftsmen 243551-REV-D 9/O2 • • • • • • Safety Instructions Tools Required for Assembly Maintenance / Storage Operation Assembly instructions Parts • Warranty Information • • Perio_:Scally check all nuts and botts for tightness. Check tires pressure regularly. 30 p.s.i, is recommended. • • Grease Wheels at Axle for longer life. Keep Cart clean and dry to prevent rust and corrosion. = Store inside a clean, dry area when not in use. • Read this Manual before assembling Cart. • Never exceed load capacity of Cart 1000 Ibs. • When operating on slopes, use lowest ground speed and limit load to 200 Ibs. Do not carry passengers in Cart. Do not use this Cart on public roads. Operate up and down slopes, never across the face of slopes, Avoid sudden turns or maneuvers. • • • • liUm;] ih,-,ii--,ialel_Jn.-,iIqldll:ig] m_n • With Cart Body attached to tractor, remove Tailgate, and then pull up on Cart Latch, Cart Body will tilt backwards, dumping contents, Once empty, replace Tailgate then pull Cart Body down until it latches. • Make sure you use the Safety Pin with the Hitch Pin when attaching to the Tractor. • Follow all operating instructions in your Tractors Owners manual. • Before beginning to assemble, layout and identify all parts and hardware. Read all assembly instructions, pages 3 - 9 before beginning to assemble Cart. Some assembly may require two people. mllali I • • • 7/16" Wrench and / or Socket, V="Wrench and / or Socket. 9/16" Wrench and / or Socket. • • Large Blade Head Screw Driver, Vise Grip Wrench. • • FOR MISSING PARTS, Call 1-800-852-2321 Mon.- FRY,,O a.m. - 5p.m. E,S. T. Page 2 J CARTON CONTENTS 10 14 33 21 8A 3 REF.NO. 1 2 3 4 5 QTY 1 7A 1 1 1 1 8A 9 10 ,,,=,, ,, 1 1 2 1 , DESCRIPTION Right Body Half Left Body Half Front Gate Comer "Rear Support Bar Gate Retainer- Right Gate Retainer- Left '" REF,NO. 11 12 13 14 16 17 21 33 34 BB Front Support Brace FOR MISSING QTY. 1 1 2 1 1 1 2 1 1 1 PARTS, Ca/I 1-800-852-2321 Mon - Ft'/, 8 a.m. - 5 p, m. E,S. T. Page 3 ,,,,, DESCRIPTION Axle Holder Drawbar Latch Post Latch Hitch Bracket A)de Wheel Tail Gate Owners Manua"l"not"shown Bolt Bag - Not Shown BAG 2 BAG 1 26 @ 25 23 22 29 27N 28 27W @ @ 24 23W 23N 22LN 28LN BAG 15 19 '_ ,I I 32 31 O 30 BOLT BAG CONTENTS Ill REF.NO. 15 18 19 2o 22 22LN 23 23W 23N 24 25 QTY. 1 2 4 2 2 2 12 42 42 4 22 DESCRIPTION REF,NO. 26 27 27W Latch Spring PVC Spacer Axle Washer 3/4" Hub Cap Bolt 1/4" x 3/4" Hex Head Lock Nut 1/4" Bolt 5/16" x 1/2" Pan Head Split Lock Washer 5/16" Hex Nut 5/16" Bolt 5/16" x 1/2" Hex Head Bolt 5/16 "x3/4" Pan Head FOR MISSING I ,,, 27N 28 28LN ,, 29 30 31 .,.._:_., PARTS, Call 1-800-652-2321, Pag= 4 QTY. 4 4 6 6 6 6 2 1 1 2 DESCRIPTION ' Bolt 5/16" x 1" Pan Head Bolt 3/8" x3/4" Pan'"Head Split Lock Washer 3/8" Hex Nut 3/8" Bolt 318" x 3/4" Hex Head Lock Nut 3/8" Bolt 3/8" x "1"Hex Head Hitch Pin (HP-3) Hair Pin Cotter Cotter Pin 1/8" x 1 1/2;" Mon- Fr_ 8 a.m. - 5 p.m, E.S. T. f Body Half Assembly "" * , FRONT GATE INSIDE I Lock Washer 5/16" Nut 5/16" Inset A 5/16" x 1/2" Pan Bolt 5/16" x 1/2" Hex _. Figure 1. Hex Nut 5/16" Inset B NOTE: DO NOT TIGHTEN BOLTS UNTIL ALL CQ,M.,.P, ONENTS IN THIS STEP ARE IN PLACE. j * Position Body Halves (1 & 2) as shown, front gate side up. Front gate side has fewer holes than tail gate side. Assemble with four 5/16" x 1/2" Hex Head Bolts (24), 5/16" Lock Washers (23W), and 5/16" Hex Nuts (23N). See inset B. * NOTE: Front Gate is positioned INSIDE Cart Body. "Lay assembled Body Halves down on floor. Add Front Gate (3), using eight 5/16" x 1/2" Pan Head Bolts (23). with 5/16" Lock Washers (23W), and 5/16" Hex Nuts (23N). * Add the two Corners (4) using four 5/16" x 1/2" Pan Head Bolts (23), 5/16" Lock Washers (23LW) and 5/16" Hex nuts (23N). See inset A, THIS STEP REQUIRES I - 5/!6" Lock Washer i(16)t - 5/16" 5/16" 1/2" Pan Bolt Head Bolt 42)1/2" Hex 5/16" xx Hex Nut FOR MISSING PARTS, Call 1-800-652-2321, Page 5 Mon- Frl, 8 a.rn. . 5 p.m.E.S.T. I f Rear Cart Assembly 5116"Hex N,,t----.. 5/16" Lock WasherS" 5/16" Hel, Nut ,,_ \ ;/16" x 3/4" Pan --Slide Tailgate into position. Bolt 5/16" x 1" Pan _ _ Rear Support Inset Cl Bolt 5/16" x 3/4" Pan Inset C Figure 2. J * Insert the Rear Support Bar (5) BEHIND the rear flanges of the assembled Body Halves. Use two 5/16" x 3/4" Pan Head Bolts (25), 5/16" Lock Washers (23W), and 5/16" Hex Nuts (23N). IN CENTER TWO HOLES ONLY. "Add Gate Retainers (7A & 8A), as shown, using the common holes to each side, with 5/16" X 3/4" Pan Head Bolt (25), 5/16" Lock Washer (23W), and 5/16" Hex Nut (23N). Do not tighten until Tailgate is inserted, * Insert Tail gate as shown in inset C1, Tighten Gate Retainer bolts. THIS STEP REQUIRES 10) - 5/16" x 3/4" Pan Head Bolt 4) - 5/16" x 1" Pan Head Bolt 14) - 5/16" Lock Washer 14) _ 5/16" Hex Nut FOR MISSING PARTS, Call 1-800-652-2321, Poge 6 Mon - Fr/, 8 a.m. - 5p.m.E.S.T. I f Front Support Assembly Bolt I x 3/4" Pan Lock Washer 3/8"_ Hex Nut Lock Washer 318" Hex Nut 3/8" Lock Nut 3/8" Front Support Brace. _'"" _ Figure 3. Front Support Bolt 3/8" x 3/4" Hex ii. * Pre-assemble the Front Support Assembly by Mounting the Brace (10) inside the Front Support (9). NOTE: THE FLANGES ARE UP. Use four 3/8" x 3/4" Hex Head Bolts (28) with 3/8" Lock Nuts (28LN). * Mount this assembly to the front of Cart as shown, with four 3/8" x 3/4" Pan Head Bolts (27), 3/8 Lock Washers (27W) and 3/8" Hex Nuts (27N). THIS STEP REQUIRES __4_ _ 3/8 '' x 3/4" Pan Head Bolt 318"x3,,"Hex BO,t 3t8" Lock Nut FOR MISSING PARTS, Call 1.800-6r_-2321, eoge 7 Mon- Frl, 8 a.m. - 5p.m.E.S.T. J f .4 (_ Drawbar Pre-Assembly 1/4" Lock x 3/4" Hex Latch Drawbar Latch Spring O E DETAIL OF LATCH NOTE POSITION OF LATCH SPRING 3/8" Lock Washer Figure 4. -3/8" Hex Nut * Assemble the Latch as shown with the Latch (14) between the two Latch Posts (13). Use one 1/4" x 3/4" Hex Head Bolt (22) with 1/4" Lock Nut (22LN). Add the other 1/4" x 3/4" Bolt for stability. * Hook up the Latch Spring (15) using the holes designated with the letter "X". SEE DETAIL. * Mount the Latch Assembly to the Drawbar (12) with two 3/8" x 3/4" Hex Head Bolts (28) and Lock Nuts (28LN). Adjust the Lock Nuts so that the Latch moves freely between Latch Posts. * Hitch Bracket (16) is attached t2}!3_::L°CkNWu_ with 3/8" x 1" Hex Head Bolts (29) and Lock Washer THIS STEP REQUIRES sher FOR MISS/NG (27W) 3/8,, x3/,. Hex Bo,, - 3/8" Lock Nut PARTS, Call 1-800-652-2321, Page 8 and Hex Nut (27N). (2) - 1/4" x 3/4" Hex Bolt (2) - 1/4" Lock Nut Mon- F/_ 8 a.m. - 5 p, m, E,S. T. f Wheel/Axle Assembly Hitch Pin_ Spacer Hub Cap Wheel Bolt 5/16" x 3/4" Pan Hex Nut 5/16" Fiaure 5. Lock Washer 5/16' J "Position Cart to add the Axle Holder. Use twelve 5/16" x 3/4" Pan Head Bolts, with 5/16" Lock Washers and 5/16" Hex Nuts. * Next, slide Axle through Axle Holder and Drawbar, Center as shown. Add Axle Washer, PVC Spacer, Wheel, and Axle Washer in that order to each end of Axle. Make sure Valve Stem faces towards the outside, * Insert Cotter Pins through holes in Axle and lock in place by spreading tine ends, Snap on Hub Caps. Set Cart upright. Slide Tail Gate into position. * Make sure ALL bolts are tight at this time. * Insert supplied hitch pin through Hitch Plate and Drawbar as shown. Add Safety Pin through Hitch Pin, * Apply Craftsman decals as pictured on front cover of this manual, THIS STEP REQUIRES (12) - 5/16" x 3/4" Pan Head Bolt 1_2/ FOR MISSING PARTS, Call 1-800-652-23.21, Page9 Mon- 5/16" Nut 5/16" Hex LockWasher Frl, 8 a.m. . 5p.m.E.S.T. REPAIR PARTS LIST FOR MISSING PARTS, Call 1-800.652-2321 Mon- Frl, 8 a.m. - 5p.m.E.$.T 27 23W DESCRIPTION Righ_Body Half REF,NO. 21T PART NO, 55_1T AM'[. 2 P,_ateRetainer R_ght Gate Retainer Left FrontSupport 21W 22 22LN 23 23W 23N "_4 25 55-21W 5,5-22 8TD541425 55-23 STD5Sl131 STD541031 55*24 55.25 2 2 2 12 42 42 4 22 Wheel Boltl/4x3/4Hax' " Lo_k Nut 1/4 Bolt5/16 x 112 Pan Lock Washer 5/16 Hex Nut 5/16 Bolt5/16 x 1/2 Hex Bolt5/16x 3/4 Pan FrontSuppolt Bla.ce. , Axle Holder Orawbar Latch Post Latch Latch Sp_g Hitch Bracket Axle 26 27 27W 27N 28 28LN 29 30 55-26 55-27 STD551137 8TD541037 55-28 STD541437 55-29 55.30 " 4 4 5 6 6 6 2 1 Bolt5! 16 x 1 Pan Bolt3/8 x3/4 Pan Lock Washer 3/8 Hex Nut 3/8 Bolt3/8 x 3/4 H'=_x Lock Nut 3/8 Bolt 3/8 x 1 Hex Hitch Pin 31 32 33 34 35 55,31 55-32 5533 55-34 55,35 1 2 1 1 2 Hair Pin Cotter Cotterpin 1/8 x 1 1/2 Tali Gate OwnersManuat Decal Body Half FrontGate , Comer Rear SupportBar 7 55-7A 8 s_ 9 10 il 12 13 14 15 16 17 18 19 55-0 55-10 55-11 55-12 55-13 55-14 55-15 55-16 55-17 55-18 55-i9 20 ss-_0 2 21 55-21 2 ,=,,,,, 1 1 1 1 2 1 1 1 1 2 4 ,,, PVC Spacer Axis Washer Hub Cap Wheel Complete Poge 10 DESCRIPTION Tire 4.80 x 8 ,vAwiWmmll FULL ONE-YEAR WARRANTY If this product fails due to a defect in matedal or workmanship within one year from the date of purchase, Sears will at its option repair or replace it free of charge. This warranty excludes Tires and Wheels, which are expendable and become worn during normal use. This warranty does not cover: • Repairs necessary because of operator abuse or negligence. • Equipment use for commercial or rental purposes. Contact you're nearest Sears Service Center to arrange for product repair, or return this product to place of purchase for replacement. This warranty gives you specific Legal rights, and you may also have other rights, which vary from state to state. This Warranty applies only while this product is in use in the United States. Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179 IU I{1_1111| Ih'i NIItl] NI] _.-uoalaiMmionmulmallmol In the space below record the model number and purchase date of your Cart, The model number can be found on a decal on the drawbar, Always mention the Model Number when requesting service or repair parts. All parts listed herein may be ordered from any Sears Service Center and most Sears Stores. Model Number- When ordering Repair Parts, Always give the Following information: Purchase Date - Keep this booklet and your Sears receipt in a safe place for future reference. Product- 12 CU. FT. HEAPED Model Number - 610.243551 Part Number - * Part Description - * DUMP CART • Found on the Repair Parts List, Reference page 10. Notes Get it fixed, ,of rs! For repair of major brand appliances in your own home... no matter who made ft, no matter who sold it! 1-800-4-MY-HOME _ Anydme, dayornight (1-800-469-4663) www.sears.com For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the location of your nearest Sears Parts & Repair Center, 1-800-488-1222 Anyldme, dayornight www.sears,com For the replacement parts, accessories and owner's manuals that you need to do-it-yourself, 1-800-366-PART call Sears PartsDIrect sM! 6a,m.-11p.m.CST, (1-800-366-7278) 7 days a week www.sears.com/partsdlrect To purchase or inquire about a Sears Service Agreement: 1-800-827-6655 7 a.m. - 5 p.m. CST, Mon,- Sat. Patapedirserviciore repalaci_ a domidilo, Au Canada pourservice en frar_s: y paraordenarpiezascon entrL_aa domicilio: 1 -877-LE-FOYER 1-888-SU-HOGAR sM (1-888-7B4-6427) pv HomeCentral'" | See_, Roebur,k vnd Co. IIII I I ® RegisteredTrademark/ _uTraaernarkof 8ears, ROeBUcK and Co, @Mar_ Regmtmda / TM Ma,'cade F_brl_ de 8e_r6, Roebu_ and Co. sM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 12 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Apr 03 14:43:34 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools