Craftsman 917273223 User Manual TRACTOR Manuals And Guides L0030170

CRAFTSMAN Lawn, Tractor Manual L0030170 CRAFTSMAN Lawn, Tractor Owner's Manual, CRAFTSMAN Lawn, Tractor installation guides

User Manual: Craftsman 917273223 917273223 CRAFTSMAN TRACTOR - Manuals and Guides View the owners manual for your CRAFTSMAN TRACTOR #917273223. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman TRACTOR Manual

Open the PDF directly: View PDF PDF.
Page Count: 64

DownloadCraftsman 917273223 User Manual  TRACTOR - Manuals And Guides L0030170
Open PDF In BrowserView PDF
Owner's Manual

CRAFTSMAN+
24.0 HP
ELECTRIC START
50" MOWER
AUTOMATIC

GARDEN TRACTOR
Model No.
917.273223

•
•
•
•
•

Safety
Assembly
Operation
Maintenance
Repair Parts

CAUTION:
Read and follow all Safety
Rules and Instructions before
operating this equipment.

For answers to your questions

about this product, Call:

1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pm, Mon- Sat

Sears, Roebuck and Co., Hoffman Estates, II 60179
Visit our Craftsman website:www.sears.com/craftsman

Warranty ...............................................

2
Safety Rules .........................................
3
Product Specifications .......................... 5
Assembly ..............................................
7
Operation ............................................
12
Maintenance Schedule ...................... 19

LIMITED TWO YEAR WARRANTY

Maintenance .......................................
19
Service and Adjustments .................... 23
Storage ...............................................
31
Troubleshooting
.................................
32
Repair Parts ........................................
36
Parts Ordering ..................... Back Cover

ON CRAFTSMAN

RIDING EQUIPMENT

PARTS

For two (2) years from the date of purchase, if this Craftsman Riding Equipment is
maintained, lubricated and tuned up according to the instructions in the owner's
manual, Sears will repair or replace, free of charge, any parts found to be defective in
material or workmanship. Warranty service is available free of charge by taking your
C'raftsman riding equipment to your nearest Sears Service Center. In-home warranty
service is available but a trip charge will apply. This warranty applies only while this
product is in the United States.
This Warranty does not cover:
• Expendable items which become worn during normal use, such as blades, spark
plugs, air cleaners, belts and oil filters.
• Tire replacement or repair caused by punctures from outside objects, such as nails,
thorns, stumps, or glass.
• Repairs necessary because of operator abuse, including but not limited to, damage
caused by towing objects beyond the capability of the riding equipment, impacting
objects that bend the frame or crankshaft, or over speeding the engine.
• Repairs necessary because of operator negligence, including but not limited to,
electrical and mechanical damage caused by improper storage, failure to use the
proper grade and amount of engine oil, failure to keep the deck clear of flammable
debris, or the failure to maintain the equipment according to the instructions contained in the owner's manual.
• Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized (stale). In general, fuel should be used within thirty (30) days of its
purchase date.
• Riding equipment used for commercial or rental purposes.
LIMITED 90 DAY WARRANTY

ON BATTERY

For ninety (90) days from date of purchase, if any battery included with this riding
equipment proves defective in material or workmanship and our testing determines the
battery will not hold a charge, Sears will replace the battery at no charge. Warranty
service is available free of charge by taking your Craftsman riding equipment to your
nearest Sears Service Center. In-home warranty service is available but a trip charge
will apply. This warranty applies only while this product is in the United States.
To locate the nearest sears service center or to schedule in-home warranty service,
simply contact sears at 1-800-4-my-home
This Warranty gives you specific legal rights, and you may also have other rights which
may vary from state to state.

2

IMPORTANT: This cutting machine is
capable of amputating hands and feet
and throwing objects. Failure to observe
the following safety instructions could
result in serious injury or death.
GENERAL OPERATION

of-control and tipover accidents, which
can result in severe injury or death. All
slopes require extra caution. If you
cannot back up the slope or if you feel
uneasy on it, do not mow it.
DO:

• Read, understand, and follow all
instructions in the manual and on the
machine before starting.
• Only allow responsible adults, who are
familiar with the instructions, to
operate the machine.
• Clear the area of objects such as
rocks, toys, wire, etc., which could be
picked up and thrown by the blade.
• Be sure the area is clear of other
people before mowing. Stop machine
if anyone enters the area.
• Never carry passengers.
• Do not mow in reverse unless absolutely necessary. Always look down
and behind before and while backing.
• Be aware of the mower discharge
direction and do not point it at anyone.
Do not operate the mower without
either the entire grass catcher or the
guard in place.
• Slow down before turning.
• Never leave a running machine
unattended. Always turn off blades, set
parking brake, stop engine, and
remove keys before dismounting.
• Turn off blades when not mowing.
• Stop engine before removing grass
catcher or unclogging chute.
• Mow only in daylight or good artificial
light.
• Do not operate the machine while
under the influence of alcohol or
drugs.
• Watch for traffic when operating near
or crossing roadways.
• Use extra care when loading or
unloading the machine into a trailer or
truck.
• Data indicates that operators, age 60
years and above, are involved in a
large percentage of riding mowerrelated injuries. These operators
should evaluate their ability to operate
the riding mower safely enough to
protect themselves and others from
serious injury.
SLOPE OPERATION

• Mow up and down slopes, not across.
• Remove obstacles such as rocks, tree
limbs, etc.
• Watch for holes, ruts, or bumps.
Uneven terrain could overturn the
machine. Tall grass can hide obstacles.
• Use slow speed. Choose a low gear
so that you will not have to stop or shift
while on the slope.
• Follow the manufacturer's recommendations for wheel weights or counterweights to improve stability.
• Use extra care with grass catchers or
other attachments. These can change
the stability of the machine.
• Keep all movement on the slopes slow
and gradual. Do not make sudden
changes in speed or direction.
• Avoid starting or stopping on a slope. If
tires lose traction, disengage the
blades and proceed slowly straight
down the slope.
DO NOT"

Slopes are a major factor related to loss-

• Do not turn on slopes unless necessary, and then, turn slowly and
gradually downhill, if possible.
• Do not mow near drop-offs, ditches, or
embankments. The mower could
suddenly turn over if a wheel is over
the edge of a cliff or ditch, or if an edge
caves in.
• Do not mow on wet grass. Reduced
traction could cause sliding.
• Do not try to stabilize the machine by
putting your foot on the ground.
• Do not use grass catcher on steep
slopes.
CHILDREN
Tragic accidents can occur if the operator
is not alert to the presence of children.
Children are often attracted to the
machine and the mowing activity. Never
assume that children will remain where
you last saw them.
• Keep children out of the mowing area
and under the watchful care of another
responsible adult.
• Be alert and turn machine off if
children enter the area.
3

• Before and when backing, look behind
and down for small children.

• Never tamper with safety devices.
Check their proper operation regularly.
• Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel
spillage. Allow machine to cool before
storing.
• Stop and inspect the equipment if you
strike an object. Repair, if necessary,
before restarting.
° Never make adjustments or repairs
with the engine running.
• Grass catcher components are subject
to wear, damage, and deterioration,
which could expose moving parts or
allow objects to be thrown. Frequently
check components and replace with
manufacturer's
recommended parts,
when necessary.
• Mower blades are sharp and can cut.
Wrap the blade(s) or wear gloves, and
use extra caution when servicing
them.
• Check brake operation frequently.
Adjust and service as required.
• Be sure the area is clear of other
people before mowing. Stop machine
if anyone enters the area.

• Never carry children. They may fall off
and be seriously injured or interfere
with safe machine operation.
• Never allow children to operate the
machine.
• Use extra care when approaching blind
corners, shrubs, trees, or other objects
that may obscure vision.
SERVICE
• Use extra care in handling gasoline
and other fuels. They are flammable
"and vapors are explosive.
Use only an approved container.
Never remove gas cap or add fuel
with the engine running. Allow
engine to cool before refueling. Do
not smoke.
Never refuel the machine indoors.
Never store the machine or fuel
container inside where there is an
open flame, such as a water heater.
• Never run a machine inside a closed
area.
• Keep nuts and bolts, especially blade
attachment bolts, tight and keep
equipment in good condition.

• Watch for holes, ruts, or bumps.
Uneven terrain could overturn the
machine. Tall grass can hide obstacles.
• Use slow speed. Choose a low gear
so that you will not have to stop or shift
while on the slope.
• Avoid starting or stopping on a slope. If
tires lose traction, disengage the
blades and proceed slowly straight
down the slope.
• If machine stops while going uphill,
disengage blades, shift into reverse
and back down slowly.
• Do not turn on slopes unless necessary, and then, turn slowly and
gradually downhill, if possible.

• Never carry passengers or children
even with the blades off.
• Do not mow in reverse unless absolutely necessary. Always look down
and behind before and while backing.
• .Never carry children. They may fall off
and be seriously injured or interfere
with safe machine operation.
• Keep children out of the mowing area
and under the watchful care of another
responsible adult.
• Be alert and turn machine off if
children enter the area.
• Before and when backing, look behind
and down for small children.
• Mow up and down slopes (15 ° Max),
not across.
• Remove obstacles such as rocks, tree
limbs, etc.

4

_CAUTION:
Tow only the attachments
that are recommended by and comply
with specifications of the manufacturer of
your tractor. Use common sense when
towing. Operate only at the lowest
possible speed when on a slope. Too
heavy of a load, while on a slope, is
dangerous. Tires can lose traction with
the ground and cause you to lose control
_YwOur tractor.
ARNING: The engine exhaust from
this product contains chemicals known to
the State of California to cause cancer,
birth defects, or other reproductive harm.

_Look
for this symbol to point out
important safety precautions. It means
CAUTION!!! BECOMEAWARE!flYOUR
_FETY
IS INVOLVED.
CAUTION: In order to prevent
accidental starting when setting up,
transporting, adjusting or making repairs
always disconnect spark plug wire and
place wire where it cannot contact spark
CAUTION: Do not coast down a hill in
neutral, you may lose control of the
tractor.
PRODUCT

SPECIFICATIONS

GASOLINE
CAPACITY
AND TYPE:

3.5 GALLONS
UNLEADED
REGULAR

OILTYPE

SAE 10W30

API-SF/SG/SH):

OILCAPAClTY:

Please read and retain this manual. The
instructions will enable you to assemble
and maintain your tractor properly.
Always observe the "SAFETY RULES".
REPAIR AGREEMENT
A Sears Repair Agreement is available
on this product. Contact your nearest
Sears store for details.
CUSTOMER RESPONSIBILITIES
* Read and observe the safety rules.
• Follow a regular schedule in maintaining, caring for and using your tractor.
• Follow the instructions under "Maintenance" and "Storage" sections of this
owner's manual.

(ABOVE 32°F)
SAE 5W-30
(BELOW 32°F)
W/FILTER: 4.5PINTS
W/O FILTER: 4.0PINTS

SPARK PLUG:
GAP: .030")
GROUND

CHAMPION
RCl 2YC
FORWARD:

5.8

SPEED(MPH):
TIRE
PRESSURE:

REVERSE:
FRONT:
REAR:

2.1
14 PSI
10 PSI

CHARGING
SYSTEM:

15AMPS @ 3600RPM

BATTERY:

AMP/HR:
35
MIN. CCA: 280
CASE SIZE:U1R

BLADE BOLT
TORQUE:

27-35 FT. LBS

AWARNING"
This tractor is equipped
with an internal combustion engine and
should not be used on or near any
unimproved forest-covered,
brushcovered or grass-covered land unless
the engine's exhaust system is equipped
with a spark arrester meeting applicable
local or state laws (if any). If a spark
arrester is used, it should be maintained
in effective working order by the operator.
In the state of California the above is
required by law (Section 4442 of the
California Public Resources Code).
Other states may have similar laws.
Federal laws apply on federal lands. A
spark arrester for the muffler is available
through your nearest Sears Authorized
Service Center (See REPAIR PARTS
section of this manual).

i

CONGRATULATIONS
on your purchase
of a Craftsman Tractor. It has been
designed, engineered and manufactured
to give you the best possible dependability and performance.
Should you experience any problem you
cannot easily remedy, please contact
your nearest Sears Authorized Service
Center. We have competent, well-trained
technicians and the proper tools to
service or repair this tractor.

5

Steering Wheel

Steering Sleeve
Steering Wheel Insert

Steering Sleeve
Extension

i

Seat

(1) Shoulder
Bolt 5/16-18

(1) Washer
17/32 x 1-3/16 x 12 Gauge
(1) Knob

____,

Mower

(4) Retainer Springs (single loop)

(3) Retainer Springs (double loop)

Gauge Wheels

(4) Brackets

(4) Adjusting Bar

5/16-18
_

_

(12) Carriage Bolts
_(12)
5/16-18 x 5/8

(4) Locknut

Cr°wnl°ckNuts(_

(4) Wheels

3/8-16 _(_
_

_

Washers
3/_ 4)
x 3/4
x 14 Ga.

(4) Shoulder Bolt

(4) Reta.iner.S,
taouDleprings
ioop_

6

(4) IClevis
Pin_
O

Slope Sheet

Video Cassette
Keys

€

F-3

i

(2) Keys

Your new tractor has been assembled at the factory with exception of those parts left
unassembled for shipping purposes. To ensure safe and proper operation of your
tractor all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness. Review the video cassette before
you begin.

TOOLS REQUIRED
ASSEMBLY

TO REMOVE TRACTOR
CARTON

FOR

UNPACK

A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listed below.
(1) 9/16" wrench
(1) Pliers
(1) 1/2"wrench
(1) Utility knife
(1) 3/4" socket with
drive ratchet
(1) Tire pressure gauge

FROM

CARTON

• Remove all accessible loose parts and
parts boxes from shipping carton.
• Cut, from top to bottom, along lines on
all four corners of shipping carton, and
lay panels flat.
• Remove mower and packing materials.
• Check for any additional loose parts or
boxes and remove.

When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating
position (seated behind the steering
wheel).

7

(label located between terminals)
charge battery for minimum of one
hour at 6-10 amps. (See "BATTERY"
Maintenance
section of this manual
for charging instructions).

BEFORE REMOVING TRACTOR
FROM SKID
AI-FACH STEERING

WHEEL

• Remove hex bolt, lock washer and
large flat washer from steering shaft.
• Position front wheels of the tractor so
they are pointing straight forward.
• Slide the steering sleeve over the
steering shaft.
• "Align tabs and press steering sleeve
extension into bottom of steering
wheel.
• Position steering wheel so cross bars
are horizontal (left to right) and slide
onto steering wheel adapter.
• Secure steering wheel to steering
shaft with hex bolt, lock washer and
large flat washer previously removed.
Tighten securely.
• Snap steering wheel insert into center
of steering wheel.
• Remove protective materials from
tractor hood and grill.
IMPORTANT: Check for and remove any
staples in skid that may puncture tires
where tractor is to roll off skid.
_--_

'"_'_

Adjust seat before tightening adjustment
knob.
• Remove adjustment knob and flat
washer securing seat to cardboard
packing and set aside for assembly of
seat to tractor.
• Pivot seat upward and remove from
the cardboard packing. Remove the
cardboard packing and discard.
• Place seat on seat pan and assemble
shoulder bolt. Tighten shoulder bolt
securely.
• Assemble adjustment knob and flat
washer loosely. Do not tighten.
• Lower seat into operating position and
sit on seat.
• Slide seat until a comfortable position
is reached which allows you to press
clutch/brake pedal all the way down.
• Get off seat without moving its adjusted
position.
• Raise seat and tighten adjustment
knob securely.

Wheel Insert

_

Wheel__

•Large. Flat
wasner

_/Steedng
•

_/_
Steering
Sleeve _-..._::::=:--Tabs
Extension

Label

INSTALL SEAT

---Hex Bolt
_,-----Lock
Washer
^•
_teerlng

"""

in

Wheel
Adapter

Seat Pan

Steedng Shaft

Shoulder
Bolt

Steering
Sleeve

HOW TO SET UP YOUR
CHECK BATTERY

Adjustment
Knob
NOTE: You may now roll or drive your
tractor off the skid. Follow the appropriate
instruction below to remove the tractor
from the skid.

TRACTOR

• Lift hood to raised position.
• If this battery is put into service after
month and year indicated on label

8

TO ROLL TRACTOR OFF SKID (See

ASSEMBLE GAUGE WHEELS AND
BRACKETS TO MOWER DECK

Operation
section for location and
function of controls)
• Press lift lever plunger and raise
attachment lift lever to its highest
position.
• Release parking brake by depressing
clutch/brake pedal.
• Place freewheel control in freewheeling position to disengage transmission (See TO TRANSPORT" in the
Operation section of this manual).
• Roll tractor forward off skid.

TO DRIVE TRACTOR

The gauge wheels are designed to keep
the mower deck in proper position when
operating mower. Be sure they are
properly adjusted to ensure optimum
mower performance.
• Attach front gauge wheel brackets
marked front left (FL), front right (FR)
to mower deck using (3) carriage bolts
and (3) Iocknuts. For ease of installation do not tighten Iocknuts until all
carriage bolts have been installed.
• Attach rear gauge wheel brackets
marked rear left (R L), rear right (RR)
to mower deck using (3) carriage bolts
and (3) Iocknuts. For ease of installation do not tighten Iocknuts until all
carriage bolts have been installed.
• Slide gauge wheel bar down into
bracket channel, Be sure that gauge
wheel bar aligning holes are on top.
Assemble gauge wheels as shown
using shoulder bolts, 3/8 washers and
3/8-16 center Iocknuts and tighten
securely.
• Adjust gauge wheels to highest
position for ease of mower deck
assembly.
• Adjust gauge wheels before operating
mower as shown in the operation
section of this manual.

OFF SKID

(See Operation
section for location
and function of controls)
_WARNING:
Before starting, read,
understand and follow all instructions in
the Operation section of this manual. Be
sure tractor is in a well-ventilated area.
Be sure the area in front of tractor is
clear of other people and objects.
• Be sure all the above assembly steps
have been completed.
• Check engine oil level and fill fuel
tank with gasoline.
• Place freewheel control in =transmission engaged" position.
• Sit on seat in operating position,
depress clutch/brake pedal and set
the parking brake.
• Place motion control lever in neutral
(N) position.
• Press lift lever plunger and raise
attachment lift lever to its highest
position.
• Start the engine. After engine has
started, move throttle control to idle
position.
• Release parking brake.
• Slowly move the motion control lever
forward and slowly drive tractor off
skid.
• Apply brake to stop tractor, set parking
brake and place gearshift lever in
neutral position.
• Turn ignition key to =OFF" position.
Continue with the instructions that follow.

Nut

Spdng

Adjusting
Bar
Shoulder
\
GauB°ltge
_

3/8

9

Bolts

Center Locknut

install link in top hole of R.H. front
mower bracket. Retain with single
loop retainer spring as shown.
Turn height adjustment knob counterclockwise until it stops.
Lower mower linkage with attachment
lift control.
Place the suspension arms on inward
pointing deck pins. It necessary, rock
and raise front of mower to align deck
pins with the holes in suspension
arms. Retain with double loop retainer
springs with loops down as shown.
Connect anti-sway bar to chassis
bracket under left footrest and retain
with double loop retainer spring.
Turn height adjustment knob clockwise to remove slack from mower
suspension.
Raise deck to highest position.
Adjust gauge wheels before operating
mower as shown in the Operation
section of this manual.

INSTALL MOWER
AND DRIVE
BELT
Be sure tractor is on level surface and
mower suspension arms are raised with
attachment lift control. Engage parking
brake,
• Cut and remove ties securing antisway bar and belts. Swing anti-sway
bar to left side of mower deck.
• Slide mower under tractor with
discharge guard to right side of tractor.
IMPORTANT:
Check belt for proper
routing in all mower pulley grooves.
Install belt into electric clutch pulley
groove.
• Install one front link in top hole of the
L.H. front mower bracket and L.H, front
suspension bracket. Retain with two
single loop retainer springs as shown.
• Install second front link in R.H, front
suspension bracket only and retain
with single loop retainer spring as
•shown.
• Slide right side of mower back and

Double Loop
Retainer Spring
(Inward pointing
deck pins:

Front
Suspension

Suspension
Arms
Front Mower
Bracket

Chassis
Bracket

Front Link

Gauge Wheel

Single Loop
Retainer Springs

Loop
Retainer Spring

Discharge

Bar

Idler Pulley

Down

I0

CHECK TIRE PRESSURE

CHECKLIST

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important
for best cutting performance.
• Reduce tire pressure to PSI shown in
=PRODUCT SPECIFICATIONS"
section of this manual.

BEFORE YOU OPERATE AND ENJOY
YOUR NEW TRACTOR, WE WISH TO
ASSURE THAT YOU RECEIVE THE
BEST PERFORMANCE
AND
SATISFACTION FROM THIS QUALITY
PRODUCT.

CHECK MOWER LEVELNESS

PLEASE REVIEW THE FOLLOWING
CHECKLIST:

For best cutting results, mower should be
properly leveled. See "TO LEVEL
MOWER HOUSING" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER
OF ALL BELTS

,/

All assembly instructions have been
completed.
,/No remaining loose parts in carton.
1/' Battery is properly prepared and
charged.
(Minimum 1 hour at 6
amps).
,/Seat is adjusted comfortably and
tightened securely.
,/All tires are properly inflated. (For
shipping purposes, the tires were
overinflated at the factory).
,/Be sure mower deck is properly
leveled side-to-side/front-to-rear for
best cutting results. (Tires must be
properly inflated for leveling).
,/Check mower and drive belts. Be sure
they are routed properly around
pulleys and inside all belt keepers.
,/Check wiring. See that all connections
are still secure and wires are properly
clamped.
•/ Before driving tractor, be sure freewheel control is in drive position.

POSITION

See the figures that are shown for
replacing motion, mower drive, and
mower blade drive belts in the Service
and Adjustments section of this manual.
Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM
After you learn how to operate your
tractor, check to see that the brake is
properly adjusted. See 'q-O ADJUST
BRAKE" in the Service and Adjustments
section of this manual.

WHILE LEARNING HOWTO USE YOUR
TRACTOR, PAY EXTRAATTENTION
TO
THE FOLLOWING IMPORTANT ITEMS:
,/" Engine oil is at proper level.
,/Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
,I Become familiar with all controls - their
location and function. Operate them
before you start the engine.
,/Be sure brake system is in safe
operating condition.
,/" It is important to purge the transmission before operating your tractor for
the first time. Follow proper starting
and transmission purging instructions
(See "TO START ENGINE" and
"PURGE TRANSMISSION"
in the
Operation section of this manual).

11

These symbols may appear on your tractor or in literature
Leam and understand their meaning.

supplied with the product.

BATTERY

CAUTION OR
WARNING

ENGINE ON

ENGINE OFF

OIL PRESSURE

LIGHTS ON

FUEL

CHOKE

MOWER HEIGHT

PARKING BRAKE
LOCKED

REVERSE

R N
ATTACHMENT
CLUTCH ENGAGED

___)

REVERSE

NEUTRAL

ATTACHMENT
IGNITION

FORWARD

FAST

H

L

HIGH

LOW

KEEP AREA CLEAR

SLOW

UNLOCKED

MOWER LIFT

PARKING BRAKE

SLOPE HAZARDS

(SEE SAFETY RULES SECTION)

CLUTCH DISENGAGED

FREE WHEEL
(Automatic Models only)

DANGER, KEEP HANDS AND FEET AWAY

12

KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL
YOUR TRACTOR

AND SAFETY RULES BEFORE

OPERATING

Compare the illustrations with your tractor to familiarize yourself with the locations of
various controls and adjustments. Save this manual for future reference.

Ammeter

Hourmeter

Ignition
Switch

Attachment
Clutch
Switch
Lever
Plunger

Throttle Control
Clutch/Brake

'Attachment
Lift Lever

Choke Control
Brake Lever
Height
Adjustment
Knob

Motion Control
Lever
Approx.
Speed:

Our tractors conform to the safety standards of the American National Standards
Institute.
ATTACHMENT CLUTCH SWITCH Used to engage the mower blades, or
other attachments mounted to your
tractor.
LIGHT SWITCH - Turns the headlights on
and off.
THROTTLE CONTROL - Used to control
engine speed.
CLUTCH/BRAKE
PEDAL - Used for
declutching and braking the tractor and
starting the engine.
CHOKE CONTROL - Used when starting
a cold engine.
HEIGHT ADJUSTMENT
KNOB - Used to
adjust the mower cutting height.
IGNITION SWITCH - Used for starting
and stopping the engine.
HOURMETERIndicates hours of
operation.

ATTACHMENT LIFT LEVER - Used to
raise, lower, and adjust the mower deck
or other attachments mounted to your
tractor.
LIFT LEVER PLUNGER - Used to
release attachment lift lever when
changing its position.
AMMETER - Indicates charging (+) or
discharging (-) of battery.
PARKING BRAKE LEVER - Locks
clutch/brake pedal into the brake
position.
MOTION CONTROL LEVER - Selects the
speed and direction of tractor.
FREEWHEEL CONTROL - Disengages
transmission for pushing or slowly
towing the tractor with the engine off.

13

The operation of any tractor can result in foreign objects thrown into
the eyes, which can result in severe eye damage. Always wear safety
glasses or eye shields while operating your tractor or performing any
adjustments or repairs. We recommend a wide vision safety mask
over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR
TO SET PARKING

• Never use choke to stop engine.
IMPORTANT:
Leaving the ignition
switch in any position other than "OFF"
will cause the battery to be discharged,
(dead).
NOTE: Under certain conditions when
tractor is standing idle with the engine
running, hot engine exhaust gases may
cause "browning" of grass. To eliminate
this possibility, always stop engine when
_lopping tractor on grass areas.
CAUTION: Always stop tractor
completely, as described above, before
leaving the operator's position; to empty
grass catcher, etc.
TO USE THRO'n'LE
CONTROL

BRAKE

Your tractor is equipped with an operator
presence sensing switch. When engine
is running, any attempt by the operator to
leave the seat without first setting the
parking brake will shut off the engine.
Depressclutch/brake
pedal into full
i BRAKE position and hold.
Place parking brake lever in "ENGAGED" position and release pressure from clutch/brake pedal. Pedal
should remain in "BRAKE" position.
Make sure parking brake will hold
tractor secure.
Push-In to

Choke
"Disengage"
Control, _,_"

Brake _J / )!_I_)_5_/
Pedal
/
_
j
_ever_

__t
/ _'_Knob
Clutch/Brake Pedal
"Ddve" Position

Attachment Clutch

Switch Pull Out to
"Engage"

Always operate engine at ful! throttle.
• Operating engine at less than full
throttle reduces the battery charging
rate.
• Full throttle offers the best bagging
and mower performance.
TO USE CHOKE CONTROL

.......
"....,_.
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 64
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Aug 14 09:38:55 2007
Author                          : 
Title                           : 
Subject                         : 
EXIF Metadata provided by EXIF.tools

Navigation menu