Craftsman 315 113913 Operators Manual
CRAFTSMAN Worklight Manual L0812447 CRAFTSMAN Worklight Owner's Manual, CRAFTSMAN Worklight installation guides
315113913 6c9036a7-bb8c-4091-ba59-8b201f19b384 Craftsman Work Light 315.113913 User Guide |
2015-01-05
: Craftsman Craftsman-315-113913-Operators-Manual-161314 craftsman-315-113913-operators-manual-161314 craftsman pdf
Open the PDF directly: View PDF .
Page Count: 8
PERATOR'S MAN AL
®
19.2 VOLT WORKUGHT
Model No.
315.113913
BATTERIES AND CHARGERS
SOLD SEPARATELY
,_ WARNING: To reduce the risk
of injury, the user must read and
understand the operator's manual
before using this product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman cOus
983000-712
9-3-08 (REV:05) Save this manual for future reference
[] Warranty .......................................................................................................................................................................... 2
[] Introduction ..................................................................................................................................................................... 2
[] General Safety Rules .................................................................................................................................................... 3-4
[] Symbols ........................................................................................................................................................................... 5
[] Operation ......................................................................................................................................................................... 6
[] Maintenance .................................................................................................................................................................... 7
[] Parts Ordering/Service ..................................................................................................................................... Back Page
ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN iT TO ANY
SEARS STORE OR OTHER CRAFTSMAN OUTLET iN THE UNITED STATES FOR FREE REPLACEMENT.
If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of
purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
This worklight has many features for making its use more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of this product making it easy to maintain and operate.
PORTANT SAFETY I ST
AWARNING. wREAD AND UNDERSTAND
ALL INSTRUCTIONS. Failure to follow
all instructions listed below, may result in
electric shock, fire and/or serious personal
injury.
AWARNING. wWhen using electric
appliances, basic precautions should
always be followed, including the following:
AWARNING: The lens gets very hot dur-
ing use. To reduce the risk of burns, do not
touch a hot lens.
[] Read all the instructions before using the appliance.
[] To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
[] Do not use outdoors.
[] To reduce the risk of electrical shock, do not put
flashlight or charger in water or other liquid. Do not
place or store appliance where it can fall or be pulled
into atub or sink.
[] Use only the charger supplied by the manufacturer
to recharge.
[] Use only recommended battery pack. Any attempt
to use another battery pack will cause damage to your
worklight and could possibly explode, cause a fire, or
personal injury.
MODEL CHARGER
315.113913
BATTERY PACK
(M-ion)
315.113710
(130156001)
315.113740
(130285003)
(Multi-Chemistry)
315.259260
(140351001)
(130285006) .
BATTERY PACK
(Ni-Cd}
130279003,
130279005
(Item No._11375)
315.259260
(140351001)
1425301 _11041)
315.115730
(140301003)
140107001
[] Remove battery pack from worklight before replac-
ing bulb or performing any routine maintenance or
cleaning. Replace bulb with same type rated 19.2 V,
0.6 Amp.
[] Do not disassemble the worklight.
[] Do not place worklight or battery pack near fire or
heat. They may explode. Also, do not dispose of a
worn out battery pack by incinerating. Do not inciner-
ate the battery, even if it is severely damaged or com-
pletely worn out. The battery may explode in fire.
[] Do not operate worklight or charger near flamma-
ble liquids or in gaseous or explosive atmospheres.
Internal sparks may ignite fumes.
[] Do not store your worklight in a damp or wet loca-
tion. Do not store in locations where the tempera-
ture is less than 50°F or more than 100°R Do not
store in outside sheds or in vehicles.
[] Do not permit children to use worklight unsuper-
vised. It is not a toy. The temperature of the bulb will
become hot after being on for only a short period of
time. This hot temperature can cause burn injury if
touched and can create sufficient heat to melt some
fabrics.
[] If wrapped or in contact with fabrics, the worklight
lens can produce sufficient heat to melt some fab-
rics. To avoid serious personal injury, never allow the
worklight lens to come in contact with anything.
[] Keep light dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products, or
any strong solvent to clean the worklight.
[] Don't expose worklight to rain. Water entering a
power tool will increase the risk of electric shock or
malfunction.
[] Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enable better
control of the worklight in unexpected situations. Do
not use on a ladder or unstable support.
WORKLIGHT USE AND CARE
[] This product is for household use only.
[] Store worklight out of the reach of children and
other untrained persons. Worklights are dangerous in
the hands of untrained users.
[] Let worklight cool for several minutes after use
before changing the bulb.
[] Do not use or permit use of worklight in bed or
sleeping bags. This worklight lens can melt fabric and
a burn injury could result.
SAFETY RULES FOR BATTERY WORKLIGHTS
[] Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid gets
in your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention.
[] Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery
can propel debris and chemicals. If exposed, flush with
water immediately.
[] Do not crush, drop or damage battery pack. Do
not use abattery pack or charger that has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately. Failure to
heed this warning can result in serious personal injury.
[] If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
service center to avoid risk.
[] Save these instructions. Refer to them frequently and
use them to instruct others who may use this power
tool. If you loan someone this power tool, loan them
these instructions also.
Someof thefollowingsymbolsmaybeusedonthis worklight.Pleasestudythemandlearntheirmeaning.Proper
interpretationofthesesymbolswillallowyouto operatetheworklightbetterandsafer.
SYMBOL
V
A
min
"x.,
===-_
n o
[]
.../min
@
A
®
NAME
Volts
Amperes
Minutes
Alternating Current
Direct Current
No Load Speed
Class II Construction
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Safety Alert
Hot Surfaces
DESIGNATION/EXPLANATION
Voltage
Current
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Precautions that involve your safety.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
,A
,A
Indicates an imminently hazardous situation, which, if not avoided, will result in death or
DANGER: serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or
WARNING: serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
CAUTION moderate injury.
CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
AWARNING: To avoid serious personal injury, do not attempt to use this product until you read
thoroughly and understand completely the Operator's Manual. If you do not understand the
warnings and instructions in the Operator's Manual, do not use this product. Call Customer
Service for assistance.
SAVE THESE I STRUCTIO
ROTATEHEADTOTHE
_tL WARNING: The safe use of this product DESIREDPOSITION
requires an understanding of the information
on the tool and in this operator's manual.
Before use of this product, familiarize
yourself with all operating features and
safety rules.
MULTI-POSiTION
HEAD
SWITCH
TRIGGER
CAUTION: When placing the battery pack in the
tool, be sure raised rib on battery pack aligns with
the groove in the tool and that the latches snap into
place properly. Improper assembly of the battery
pack can cause damage to internal components.
BATTERY
PACK
DEPRESSLATCHESTO
RELEASEBATTERYPACK
LATCHES
ALIGNRAISEDRiBS WiTH GROOVEINSIDEWORKLIGRTBASE;
SLIDETOGETHERUNTILLATCHESCLICK.
Fig. 1
PULLLENSCOVER
FORWARDTO REMOVE
DEPRESSBUTTON
Fig. 2
BATTERY PROTECTION FEATURES
DieHardo 19.2 V lithium-ion battery packs are designed
with features that protect the lithium-ion cells and
maximize battery life.
If the tool stops during use, release the trigger to reset
and resume operation. If the tool still does not work, the
battery needs to be recharged. Fig. 3
BULBREPLACEMENT
Replace the bulb with the same type rated
19.2 V, 0.6 Amp.
Always ask for replacement bulb number 7811502.
TABS
LENSCOVER
PULLCOOLEDBULBFROMSPRING;PUSHNEWBULBINTO
SPRING.TO REPLACELENSCOVER,ALIGNTABSINSIDELENS
COVERWiTH SLOTSON HOUSING;SNAPiNTO PLACE.
SPRING
SLOT
BULB
BUTTON BULB
STORAGE AREA
SLOT
Fig. 4
BATTERIES
This product will accept DieHard_ 19.2 V lithium-ion bat-
tery packs and Craftsman 19.2 V nickel-cadmium battery
packs.
The batteries for this product have been designed
to provide maximum trouble-free life. However, like
all batteries, they will eventually wear out. Do not
disassemble battery pack and attempt to replace the
batteries. Handling of these batteries, especially when
wearing rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
For lithium-ion batteries:
[] Remove the battery pack from the charger once it is
fully charged and ready for use.
For battery pack storage longer than 30 days:
[] Store the battery pack where the temperature is below
80°F and away from moisture.
[] Store battery packs in a 30%-50% charged condition.
[] Every six months of storage, charge the pack as
normal.
For nickel-cadmium batteries:
[] Remove the battery pack from the charger once it is
fully charged and ready for use.
For battery pack storage longer than 30 days:
[] Store the battery pack where the temperature is below
80°R
[] Store battery packs in a "discharged" condition.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product uses nickel-cadmium
and lithium-ion batteries. Local, state
or federal laws may prohibit disposal
of batteries in ordinary trash.
Consult your local waste authority
for information regarding available
recycling and/or disposal options.
AWARNING: Upon removal, cover the
battery pack's terminals with heavy-duty
adhesive tape. Do not attempt to destroy
or disassemble battery pack or remove any
of its components. Lithium-ion and nickel-
cadmium batteries must be recycled or
disposed of properly. Also, never touch both
terminals with metal objects and/or body
parts as short circuit may result. Keep away
from children. Failure to comply with these
warnings could result in fire and/or serious
injury.
Your Home
For expert troubleshooting and home solutions advice
÷a g÷
www.managemyhome.com
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ®(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.)
www.sears.com
1-800-469-4663 (Canada)
www.sears.ca
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparaci6n
a domicilio, y para ordenar piezas:
1-888-SU-HOGAR ®
(1-888-784-6427)
Au Canada pour service en frangais:
1-800-LE-FOYER Mc
(1-800-533-6937)
www.sears.ca
® Registered Trademark /TM Trademark /SMService Mark of Sears Brands, LLC
® Marca Registrada /TM Marca de Fabrica /SM Marca de Servicio de Sears Brands, LLC
MCMarque de commerce /MDMarque d6posee de Sears Brands, LLC © Sears Brands, LLC